A pressure-sensitive rheological origin of high friction angles of granular matter observed in NASA–MGM project

An abnormally high peak friction angle of Ottawa sand was observed in(National Aeronautics and Space Administration) NASA–(Mechanics of Granular Materials) MGM tests in microgravity conditions on the space shuttle. Previous investigations have been unsuccessful in providing a constitutive insight into this behavior of granular materials under extremely low effective stress conditions. Here, a recently proposed unified constitutive model for transient rheological behavior of sand and other granular materials is adopted for the analytical assessment of high peak friction angles. For the first time, this long-eluded behavior of sand is attributed to a hidden rheological transition mechanism, that is not only rate-sensitive, but also pressure-sensitive. The NASA–MGM microgravity conditions show that shear-tests of sand can be performed under abnormally low confining stress conditions. The pressure-sensitive behavior of granular shearing that is previously ignored is studied based on the μ(I) rheology and its variations. Comparisons between the model and the NASA microgravity tests demonstrate a high degree of agreement. The research is highly valid for pressure-sensitive and rate-dependent problems that occur during earthquakes, landslides, and space exploration.

Reinforcing Effect of Graphene in Epoxy Adhesives: Review

Due to its great strength, hardness, and chemical resistance, epoxy adhesives are becoming more and more used. They continue to have drawbacks, nevertheless, such as poor thermal stability, and poor electrical conductivity. Two-dimensional graphene is a wonderful substance with exceptional qualities including high strength, high electrical conductivity, and large surface area. Because of these characteristics, graphene has been thoroughly researched for its prospective uses in a variety of industries, including electronics, energy storage, and biomedical engineering. The use of graphene as an additive in epoxy adhesives to enhance the characteristics of such materials is one of its promising uses. This paper reviewed the latest findings about graphene’s effects on epoxy adhesives. The various methods to produce graphene-epoxy composites and their improvements are discussed. This research additionally discusses the challenges associated with the production and processing of graphene-epoxy composites, as well as the mechanisms behind the improvements in mechanical, electrical, and thermal characteristics. The final section of this review discusses the challenges and prospective uses of graphene in epoxy adhesives in the future.

Bio-based removable pressure-sensitive adhesives derived from carboxyl-terminated polyricinoleate and epoxidized soybean oil

A novel kind of fully bio-based PSAs we re obtained through the curing reaction between two components derived from the plant oils:carboxyl-terminated polyricinoleate(PRA) fro m the castor oil and epoxidized soybean oil(ESO).The get content,glass transition temperature(Tg),rheological behavior,tensile strength,creep resistance and 180° peel strength of the PSAs were feasibly tailored by adjusting the component ratio of ESO to PRA.At low cross-linking level,the PSAs behaved like a viscous liquid and did not possess enough cohesiveness to sustain the mechanical stress during peeling,The PSAs cross-linked at or near the optimal stoichiometric conditions displayed an adhesive(interfacial) failure between the substrate and the adhesive layer,which were associated with the lowest adhesion levels.The PSAs with the dosage amount of ESO ranging from 10.20 wt% were tacky and flexible,which exhibited 1800 peel strength ranging from 0.4~2.3 N/cm;and could be easily removed without any residues on the adherend.The process for the preparation of the fully bio-based PSAs was environmentally friendly without using any orga nic solve nt or other toxic chemical,herein showing the great potential as sustainable materials.

MALDI ToF Investigation of the Reaction of Soy Protein Isolate with Glutaraldehyde for Wood Adhesives

Soy protein adhesives are currently a hot research topic in the wood panels industry for the abundant raw material reserves,reasonable price and outstanding environmental features.But their poor water resistance,low bonding strength and intolerance to mold are major drawbacks,so that proper modification before use is essential.Glutaraldehyde is one of the more apt cross-linking agents for soybean protein adhesives,which can effectively improve the bonding strength and water resistance of the adhesive.Equally,glutaraldehyde is also an efficient and broad-spectrum fungicide that can significantly improve the anti-fungal properties of a soy protein adhesive.In the work presented here,matrix assisted laser desorption ionization(MALDI-ToF)mass spectrometry and Fourier transform infrared spectroscopy techniques were used to analyze the reaction mechanism of glutaraldehyde cross-linking soybean protein.The results confirmed the reaction of the aldehyde group with amino groups of the side chains and the amide groups of the peptide linkages constituting the skeletal chain of the protein.The laboratory plywood and particleboard bonded with glutaraldehyde-soy bean protein adhesives were prepared to determine the adhesive bonding properties,the dry strength,24 h cold water soaking wet strength and 3 h hot water(63°C)wet strength of plywood were 2.03,1.13 and 0.75 MPa,respectively,which satisfied the requirements of industrial production.

Little Secrets for the Successful Industrial Use of Tannin Adhesives:A Review

This brief article reviews a very particular and quite narrowfield,namely what has been done and what is needed to know for tannin adhesives for wood panels to succeed industrially.The present fashionable focus on bioadhe-sives has led to producing chemical adhesive formulations and approaches for tannin adhesives as a subject of academic publications.These,as good and original they might be,are and will still remain a rather empty aca-demic exercise if not put to the test of real industrial trials and industrial use.They will remain so without the“little”secrets and techniques outlined here that show that there is a great gap between developing an adhesive formulation in the laboratory and the hard reality to make it work where it does really count,in its industrial application.It outlines the fact that even more modern and excellent,newly developed bioadhesive formulations might well miserably fail once tried in the industry if the problems that always arise in their upgrading are not identified and solved,and solved well.It also outlines the fact that not only must costs always be taken into account and that a practical and possibly easy-to-handle approach must always be used,but too expensive or complex and unyielding adhesive systems are also often shown to be unusable or unsuitable in industry.

Crosslinking Mechanism of Soy Protein-based Adhesives based on Glyoxal and a Compound of Protein Model

The crosslinking mechanism of glyoxal and asparagine was analyzed,and the relationship between the mechanism and practical performances of soy protein-based adhesives was also discussed.It is shown that when pH=1 and 3,glyoxal reacted with asparagine in the form of major cyclic ether compounds.When pH=5,glyoxal reacted with asparagine in two structural forms of sodium glycollate and cyclic ether compounds.However,amidogens of asparagine were easy to develop protonation under acid conditions.Supplemented by the instability of cyclic ether compounds,the reaction activity and reaction degree between glyoxal and asparagine were relatively small.Under alkaline conditions,glyoxal mainly reacted with asparagine in the form of sodium glycollate.With the increase of pH,the polycondensation was more sufficient and the produced polycondensation products were more stable.The reaction mechanism between glyoxal and asparagine had strong correspondence to the practical performances of the adhesives.Glyoxal solution could develop crosslinking reactions with soy protein under both acid and alkaline conditions.Bonding strength and water resistance of the prepared soy protein-based adhesives were increased significantly.When pH>7,glyoxal had relatively high reaction activity and reaction intensity with soy protein,and the prepared adhesives had high crosslinking density and cohesion strength,showing relatively high bonding strength,water resistance and thermal stability.

MUF Resins Improved by Citric Acid as Adhesives for Wood Veneer Panels

This article presents the first applied results of using citric acid in combinations with a melamine-urea-formal-dehyde(MUF)resin for bonding wood veneers.The chemical reactions involved are shown based on a MALDI ToF analysis of the reaction of the MUF resin with citric acid.The preliminary results of the physical and mechanical properties of the LVL prepared are also presented.Veneers from Populus sp were used to manufacture 5-layer laminated veneer lumber(LVL)of small dimensions.Five combinations of the amount of citric acid,MUF spread rate and pressing parameters were tested.LVL bonded with 20%of citric acid+100 g/m^(2)of MUF,hot-pressed using a 3-step process with maximum 1.5 MPa of pressure yielded the board with better dimensional stability and mechanical properties.It could be concluded that citric acid in combination with MUF can be used for bonding wood veneer and the research should be continued to study further the parameters involved and to enhance the results.

Adhesion strength of tetrahydrofuran hydrates is dictated by substrate stiffness

Understanding the hydrate adhesion is important to tackling hydrate accretion in petro-pipelines.Herein,the relationship between the Tetrahydrofuran(THF)hydrate adhesion strength(AS)and surface stiffness on elastic coatings is systemically examined by experimental shear force measurements and theoretical methods.The mechanical factor-elastic modulus of the coatings greatly dictates the hydrate AS,which is explained by the adhesion mechanics theory,beyond the usual factors such as wettability and structural roughness.Moreover,the hydrate AS increases with reducing the thickness of the elastic coatings,resulted from the decrease of the apparent surface elastic modulus.The effect of critical thickness for the elastic materials with variable elastic modulus on the hydrate AS is also revealed.This study provides deep perspectives on the regulation of the hydrate AS by the elastic modulus of elastic materials,which is of significance to design anti-hydrate surfaces for mitigation of hydrate accretion in petro-pipelines.

正常小鼠血清通过抑制focal adhesion信号通路减轻小鼠放射性肺炎

目的探讨正常小鼠血清(NMS)对放射性肺炎的治疗作用及可能机制。方法建立胸腔照射诱导的放射性肺炎模型,将小鼠分为对照组、静脉注射血清组、照射组和照射后静脉注射血清组。注射血清组小鼠在照射后立即静脉注射正常小鼠血清100μL,对照组小鼠注射100μL生理盐水,隔天注射1次,共注射8次。照射后15 d取材,HE染色检测肺组织形态学变化,ELISA检测小鼠肺组织和血清中炎症因子肿瘤坏死因子-α(TNF-α)、转化生长因子-β(TGF-β)、白细胞介素-1α(IL-1α)、白细胞介素-6(IL-6)水平;流式细胞术检测肺组织内淋巴细胞比例变化。外泌体miRNA高通量测序探索处理后小鼠的信号通路变化,qRT-PCR检测免疫相关基因的表达水平,使用Western blotting检测黏着斑通路talin-1、tensin 2、FAK、vinculin、α-actinin和paxillin蛋白的表达。结果与照射组相比,照射后注射血清组小鼠肺脏器系数、血清及肺组织上清液中炎症因子TNF-α、TGF-β、IL-1α、IL-6水平显著降低(P<0.05),CD45^(+)、CD4^(+)、T_(reg)淋巴细胞在小鼠肺组织中的浸润程度显著下降(P<0.05);肺中Egfr和Pik3cd的mRNA和蛋白表达水平显著下调,talin-1、tensin 2、FAK、vinculin、α-actinin和paxillin蛋白的表达水平也显著降低(P<0.05)。结论正常小鼠血清通过抑制focal adhesion信号通路关键蛋白的表达减轻电离辐射诱发的小鼠放射性肺炎。

Analysis of wheel-rail adhesion redundancy considering the thirdbody medium on the rail surface

Purpose–In response to the problem of insufficient traction/braking adhesion force caused by the existence of the third-body medium on the rail surface,this study aims to analyze the utilization of wheel-rail adhesion coefficient under different medium conditions and propose relevant measures for reasonable and optimized utilization of adhesion to ensure the traction/braking performance and operation safety of trains.Design/methodology/approach–Based on the PLS-160 wheel-rail adhesion simulation test rig,the study investigates the variation patterns of maximum utilized adhesion characteristics on the rail surface under different conditions of small creepage and large slip.Through statistical analysis of multiple sets of experimental data,the statistical distribution patterns of maximum utilized adhesion on the rail surface are obtained,and a method for analyzing wheel-rail adhesion redundancy based on normal distribution is proposed.The study analyzes the utilization of traction/braking adhesion,as well as adhesion redundancy,for different medium under small creepage and large slip conditions.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived.Findings–When the third-body medium exists on the rail surface,the train should adopt the low-level service braking to avoid the braking skidding by extending the braking distance.Compared with the current adhesion control strategy of small creepage,adopting appropriate strategies to control the train’s adhesion coefficient near the second peak point of the adhesion coefficient-slip ratio curve in large slip can effectively improve the traction/braking adhesion redundancy and the upper limit of adhesion utilization,thereby ensuring the traction/braking performance and operation safety of the train.Originality/value–Most existing studies focus on the wheel-rail adhesion coefficient values and variation patterns under different medium conditions,without considering whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train.Therefore,there is a risk of traction overspeeding/braking skidding.This study analyzes whether the rail surface with different medium can provide sufficient traction/braking utilized adhesion coefficient for the train and whether there is redundancy.Based on these findings,relevant measures for the reasonable and optimized utilization of adhesion are derived to further ensure operation safety of the train.

Mussel-inspired Methacrylic Gelatin-dopamine/Ag Nanoparticles/Graphene Oxide Hydrogels with Improved Adhesive and Antibacterial Properties for Applications as Wound Dressings

A novel strategy was developed to prepare the methacrylic gelatin-dopamine(GelMA-DA)/Ag nanoparticles(NPs)/graphene oxide(GO) composite hydrogels with good biocompatibility,mechanical properties,and antibacterial activity.Mussel-inspired DA was utilized to modify the GelMA molecules,which imparts good adhesive performance to the hydrogels.GO,interfacial enhancer,not only improves mechanical properties of the hydrogels,but also provides anchor sites for loading Ag NPs through numerous oxygencontaining functional groups on the surface.The experimental results show that the GelMA/Ag NPs/GO hydrogels have good biocompatibility,and exhibit a swelling rate of 202±16%,the lap shear strength of 147±17 kPa,and compressive modulus of 136±53 kPa,in the case of the Ag NPs/GO content of 2 mg/mL.Antibacterial activity of the hydrogels against both gram-negative and gram-positive bacteria is dependent on the Ag NPs/GO content derived from the release of Ag^(+).Furthermore,the GelMA/Ag NPs/GO hydrogels possess good adhesive ability,which is resistant to highly twisted state when stuck on the surface of pigskin.These results demonstrate promising potential of the GelMA-DA/Ag NPs/GO hydrogels as wound dressings for biomedical applications in clinical and emergent treatment.

Development of a cell adhesion-based prognostic model for multiple myeloma:Insights into chemotherapy response and potential reversal of adhesion effects

Multiple myeloma(MM)is a hematologic malignancy notorious for its high relapse rate and development of drug resistance,in which cell adhesion-mediated drug resistance plays a critical role.This study integrated four RNA sequencing datasets(CoMMpass,GSE136337,GSE9782,and GSE2658)and focused on analyzing 1706 adhesionrelated genes.Rigorous univariate Cox regression analysis identified 18 key prognosis-related genes,including KIF14,TROAP,FLNA,MSN,LGALS1,PECAM1,and ALCAM,which demonstrated the strongest associations with poor overall survival(OS)in MM patients.To comprehensively evaluate the impact of cell adhesion on MM prognosis,an adhesion-related risk score(ARRS)model was constructed using Lasso Cox regression analysis.The ARRS model emerged as an independent prognostic factor for predicting OS.Furthermore,our findings revealed that a heightened cell adhesion effect correlated with tumor resistance to DNA-damaging drugs,protein kinase inhibitors,and drugs targeting the PI3K/Akt/mTOR signaling pathway.Nevertheless,we identified promising drug candidates,such as tirofiban,pirenzepine,erlotinib,and bosutinib,which exhibit potential in reversing this resistance.In vitro,experiments employing NCIH929,RPMI8226,and AMO1 cell lines confirmed that MM cell lines with high ARRS exhibited poor sensitivity to the aforementioned candidate drugs.By employing siRNA-mediated knockdown of the key ARRS model gene KIF14,we observed suppressed proliferation of NCIH929 cells,along with decreased adhesion to BMSCs and fibronectin.This study presents compelling evidence establishing cell adhesion as a significant prognostic factor in MM.Additionally,potential molecular mechanisms underlying adhesion-related resistance are proposed,along with viable strategies to overcome such resistance.These findings provide a solid scientific foundation for facilitating clinically stratified treatment of MM.

Effect of Adhesive Type on the Quality of Coconut Shell Charcoal Briquettes Prepared by the Screw Extruder Machine

Indonesia is one of the largest coconut-producing countries in the world.The utilization of coconut shell waste into briquettes will increase the selling value and become a great export opportunity.However,the effect of adhesives on the quality of coconut shell charcoal briquettes made using screw extruder machine has not been widely studied.This study aims to determine the effect of adhesive type on the quality of coconut shell charcoal briquettes.The process of fabricating briquettes in this study included crushing,mixing,blending,pressing,and drying.In the mixing process,3 types of adhesives were used,namely tapioca flour(Briquette_1),cassava flour(Briquette_2),and modified cassava flour(Briquette_3)with a concentration of 5%of the weight of coconut shell charcoal powders.The quality of the resulting briquettes and commercial briquettes will be evaluated by moisture content,ash content,volatile matter,fixed carbon,calorific value,density,compressive,and drop test testing.The results of this research showed that the type of adhesive had a significant effect on the quality of the briquettes produced.Specimen Briquette_1 had better quality than commercial briquettes(Briquette_4)and other briquette specimens.The test results showed that Briquette_1 produced briquettes with better compressive strength and friability than the other specimens,at 6.95 N/mm^(2) and 4.44%,respectively.The moisture content,ash content,fixed carbon,and calorific value of Briquette_1 have met the requirements set by the Indonesian National Standard(SNI)number 01-6235-2000.Meanwhile,the volatile matter content and density of Briquette_1 are by the standards of Japan and the United States America(USA).

Coupling of Adhesion and Anti‑Freezing Properties in Hydrogel Electrolytes for Low‑Temperature Aqueous‑Based Hybrid Capacitors

Solid-state zinc-ion capacitors are emerging as promising candidates for large-scale energy storage owing to improved safety,mechanical and thermal stability and easy-to-direct stacking.Hydrogel electrolytes are appealing solid-state electrolytes because of eco-friendliness,high conductivity and intrinsic flexibility.However,the electrolyte/electrode interfacial contact and anti-freezing properties of current hydrogel electrolytes are still challenging for practical applications of zinc-ion capacitors.Here,we report a class of hydrogel electrolytes that couple high interfacial adhesion and anti-freezing performance.The synergy of tough hydrogel matrix and chemical anchorage enables a well-adhered interface between hydrogel electrolyte and electrode.Meanwhile,the cooperative solvation of ZnCl2 and LiCl hybrid salts renders the hydrogel electrolyte high ionic conductivity and mechanical elasticity simultaneously at low temperatures.More significantly,the Zn||carbon nanotubes hybrid capacitor based on this hydrogel electrolyte exhibits low-temperature capacitive performance,delivering high-energy density of 39 Wh kg^(-1)at-60°C with capacity retention of 98.7%over 10,000 cycles.With the benefits of the well-adhered electrolyte/electrode interface and the anti-freezing hydrogel electrolyte,the Zn/Li hybrid capacitor is able to accommodate dynamic deformations and function well under 1000 tension cycles even at-60°C.This work provides a powerful strategy for enabling stable operation of low-temperature zinc-ion capacitors.

Preparation of Environmentally Friendly Urea-Hexanediamine-Glyoxal(HUG)Resin Wood Adhesive

Using non-toxic,low-volatile glyoxal to completely replace formaldehyde for preparing urea-glyoxal(UG)resin adhesive is a hot research topic that could be of great interest for the wood industry.However,urea-glyoxal(UG)resins prepared by just using glyoxal instead of formaldehyde usually yields a lower degree of polymerization.This results in a poorer bonding performance and water resistance of UG resins.A good solution is to pre-react urea to preform polyurea molecules presenting already a certain degree of polymerization,and then to condense these with glyoxal to obtain a novel UG resin.Therefore,in this present work,the urea was reacted with hexamethylene diamine to form a polyurea named HU,and then this was used to react it with different amounts of glyoxal to synthesize hexamethylenediamine-urea-glyoxal(HUG)polycondensation resins,and to use this for bonding plywood.The results show that the glyoxal can well react with HU polyuria via addition and schiff base reaction,and also the HUG resin exhibits excellent bonding strength and water resistance.The shear strength of the plywood bonded with this HUG at 160°C hot press temperature as high as 1.93 MPa,2.16 MPa and 1.61 MPa,respectively,which meets the requirement of the China national standard GB/T 9846-2015(≥0.7 MPa),and can be a good choice as a wood adhesive for industrial application.

Efficacy of Cyanoacrylate Tissue Adhesive Application in the Management of Corneal Perforations at Preah Ang Duong Hospital in Cambodia

Purpose: The study was to evaluate the efficacy of cyanoacrylate tissue adhesive (CTA) application in corneal perforations. Method: This was a prospective study on 20 patients of corneal perforations who received cyanoacrylate tissue adhesive application as treatment between March 2021 and March 2022 at Preah Ang Duong Hospital. The primary outcome measure was success rate of CTA application, while the secondary outcome was to measure postoperative best-corrected visual acuity (BCVA) and ocular complications. Results: The mean age of patients was 44.15 ± 16.05 years old and 7 (35%) were female. Causes of perforation were microbial infection in 12 patients (60%), trauma in 5 patients (25%), and sterile melting in 3 patients (15%). The perforation of size smaller than 1.5 mm was in 8 patients (40%) while 12 patients (60%) had perforated size between 1.5 mm to 3 mm. The perforation was 60% (12 patients) central, 25% (5 patients) paracentral, and 15% (3 patients) peripherally. Out of 20 patients, 5 patients (25%) received CTA application more than 1 time. The mean glue retention was 57.60 ± 31.84 days. Success rate of glue application (defined as intact globe without surgical intervention regardless of number of CTA applications) was 85%. At the last visit, 7 patients (35%) had BCVA of 6/120 or better. Common complications were uveitis (45%), ocular hypertension (30%), cataract (25%) and neovascularization (20%). No serious complications were found. Conclusion: Cyanoacrylate tissue adhesive is an effective treatment option in sealing corneal perforations with no serious complications. .

The Clinical Value of Ultrasound Image Texture Analysis in the Diagnosis of Uterine Adhesions

Purpose: This review examines the diagnostic value of transvaginal 3D ultrasound image texture analysis for the diagnosis of uterine adhesions. Materials and Methods: The total clinical data of 53 patients with uterine adhesions diagnosed by hysteroscopy and the imaging data of transvaginal three-dimensional ultrasound from the Second Affiliated Hospital of Chongqing Medical University from June 2022 to August 2023 were retrospectively analysed. Based on hysteroscopic surgical records, patients were divided into two independent groups: normal endometrium and uterine adhesion sites. The samples were divided into a training set and a test set, and the transvaginal 3D ultrasound was used to outline the region of interest (ROI) and extract texture features for normal endometrium and uterine adhesions based on hysteroscopic surgical recordings, the training set data were feature screened and modelled using lasso regression and cross-validation, and the diagnostic efficacy of the model was assessed by applying the subjects’ operating characteristic (ROC) curves. Results: For each group, 290 texture feature parameters were extracted and three higher values were screened out, and the area under the curve of the constructed ultrasonographic scoring model was 0.658 and 0.720 in the training and test sets, respectively. Conclusion Relative clinical value of transvaginal three-dimensional ultrasound image texture analysis for the diagnosis of uterine adhesions.

Endoscopic band ligation or endoscopic tissue adhesive injection in the treatment of gastric varices:Which is better?

The combination of endoscopic ultrasound with endoscopic treatment of type 1 gastric variceal hemorrhage may improve the robustness and generalizability of the findings in future studies.Moreover,the esophageal varices should also be included in the evaluation of treatment efficacy in subsequent studies to reach a more convincing conclusion.

Polyurethane Hybrid-Based Wood Adhesive: Review

Based on commercially available polyvinyl alcohol (PVA) stabilised polyvinyl acetate (PVAc), emulsion adhesives are neither heat nor moisture-resistant and show weak strength at high relative humidity and high temperatures. Pre- or post-crosslinking is another method used to manufacture a conventional vinyl-based homopolymers or copolymers system with improved water resistance. Vinyl neodecanoate (VeoVa), N-methylolacrylamide (NMA), Methacrylamide, methacrylic acid (MAA), and other self-crosslinking comonomers are typically inserted to produce highly water-resistant vinyl based homopolymers or copolymers. Additionally, organic crosslinkers like glyoxal, glutaraldehyde, citric acid, tartaric acid, and the like, as well as inorganic crosslinkers like acidic metal salts like aluminium chloride, aluminium nitrate, boric acid, and the like, can be used to prepare the highly water-resistant vinyl based homopolymers or copolymers. It is also possible to combine the self-crosslinking comonomers with the organic crosslinkers. Recently, a different hybrid chemistry has been developed that improves lap shear strength, has outstanding water resistance, good durability, and doesn’t require any additional crosslinker agents. Two distinct polymers were combined to develop hybrid polymers. They usually involve mixing an organic polymer with a polymer. There are many capping agents that are used for polyurethanes to produce acrylics that are capped with polyurethane and used as an oligomer in PVAc wood glue. Here, in this paper, we reviewed the different hybrid chemistry based on polyurethane chemistry for wood bonding applications.

Polyvinyl Acetate and Vinyl Acetate-Ethylene Hybrid Adhesive: Synthesis, Characterization, and Properties

The goal is to develop a hybrid IPN network of polyvinyl acetate (PVAc) and ethylene-vinyl acetate (VAE). In this research work, the vinyl acetate (VAc)/ VAE hybrid emulsion and polyvinyl acetate emulsion (PVAc) were effectively synthesized. Emulsions with various characteristics have been developed by adjusting the weight ratios between the vinyl acetate monomer and the VAE component. The impacts on the mechanical, thermal, and physical properties of the films were investigated using tests for pencil hardness, tensile shear strength, pH, contact angle measurement, differential scanning calorimetry (DSC), and viscosity. When 5.0 weight percent VAE was added, the tensile shear strength in dry conditions decreased by 18.75% after a 24-hour bonding period, the heat resistance decreased by 26.29% (as per WATT 91) and the tensile shear strength decreased by approximately 36.52% in wet conditions (per EN 204). The pristine sample’s results were also confirmed by the contact angle test. The interpenetrating network (IPN) formation in hybrid PVAc emulsion as primary bonds does not directly attach to PVAc and VAE chains. The addition of VAE reduced the mechanical properties (at dry conditions) and heat resistance as per WATT 91. Contact angle analysis demonstrated that PVAc adhesives containing VAE had increased water resistance when compared to conventional PVA stabilised PVAc homopolymer-based adhesives. When compared to virgin PVAc Homo, the water resistance of the PVAc emulsion polymerization was enhanced by the addition of VAE.