Engineering Thermoelectric Performance of α-GeTe by Ferroelectric Distortion

The rhombohedralα-GeTe can be approximated as a slightly distorted rock-salt structure along its[111]direction and possesses superb thermoelectric performance.However,the role of such a ferroelectric-like structural distortion on its transport properties remains unclear.Herein,we performed a systematic study on the crystal structure and electronic band structure evolutions of Ge_(1-x)Sn_(x)Te alloys where the degree of ferroelectric distortion is continuously tuned.It is revealed that the band gap is maximized while multiple valence bands are converged at x=0.6,where the ferroelectric distortion is the least but still works.Once undistorted,the band gap is considerably reduced,and the valence bands are largely separated again.Moreover,near the ferro-to-paraelectric phase transition Curie temperature,the lattice thermal conductivity reaches its minima because of significant lattice softening enabled by ferroelectric instability.We predict a peak ZT value of 2.6 at 673 K inα-GeTe by use of proper dopants which are powerful in suppressing the excess hole concentrations but meanwhile exert little influence on the ferroelectric distortion.

Local tetragonal distortion of Pt alloy catalysts for enhanced oxygen reduction reaction efficiency

Platinum-based alloy nanoparticles are the most attractive catalysts for the oxygen reduction reaction at present,but an in-depth understanding of the relationship between their short-range structural information and catalytic performance is still lacking.Herein,we present a synthetic strategy that uses transition-metal oxide-assisted thermal diffusion.PtCo/C catalysts with localized tetragonal distortion were obtained by controlling the thermal diffusion process of transition-metal elements.This localized structural distortion induced a significant strain effect on the nanoparticle surface,which further shortened the length of the Pt-Pt bond,improved the electronic state of the Pt surface,and enhanced the performance of the catalyst.PtCo/C catalysts with special short-range structures achieved excellent mass activity(2.27 Amg_(Pt)^(-1))and specific activity(3.34 A cm^(-2)).In addition,the localized tetragonal distortion-induced surface compression of the Pt skin improved the stability of the catalyst.The mass activity decreased by only 13% after 30,000 cycles.Enhanced catalyst activity and excellent durability have also been demonstrated in the proton exchange membrane fuel cell configuration.This study provides valuable insights into the development of advanced Pt-based nanocatalysts and paves the way for reducing noble-metal loading and increasing the catalytic activity and catalyst stability.

Realizing large strain at low electric field in Pb(Zr,Ti)O_(3)-based piezoelectric ceramics via engineering lattice distortion and domain structure

Pb(Zr,Ti)O_(3)-based ceramics are the mainstream materials for commercial multilayer piezoelectric ceramic actuators,but to date,large strains at low electric fields have not been well solved.Herein,0.95Pb(Zr_(0.56)Ti_(0.44))O_(3)–0.05(Bi_(0.5)Na_(0.5))TiO_(3–x)BaZrO_(3)(PZT–BNT–xBZ)ceramics with efficient ferroelectric domain wall motion were designed and realized by reducing lattice distortion and changing the domain structure.It is found that the introduction of BaZrO_(3)(BZ)weakens the tetragonal phase distortion of PZT,contributing to a reduction in the mechanical stress that impedes the migration of domain walls.Moreover,the domain structures could be modified by adjusting the BZ content,where short and broad striped domains are constructed with high amplitude characteristics to enhance the domain wall motion.A large strain of 0.39%is accordingly achieved at an electric field as low as 40 kV/cm for the sample with x=0.03,accompanied by excellent temperature stability over the temperature range of 30–210℃.This study delves into the synergistic effects of reducing lattice distortion and changing domain structure on domain wall motion and provides an effective strategy to improve the strain of PZT-based piezoelectric ceramics.

Linear magnetoresistance and structural distortion in layered SrCu_(4-x)P_(2) single crystals

We report a systematic study on layered metal SrCu_(4-x)P_(2) single crystals via transport, magnetization, thermodynamic measurements and structural characterization. We find that the crystals show large linear magnetoresistance without any sign of saturation with a magnetic field up to 30T. We also observe a phase transition with significant anomalies in resistivity and heat capacity at T_(p)~140 K. Thermal expansion measurement reveals a subtle lattice parameter variation near Tp, i.e.,?L_(c)/L_(c)~0.062%. The structural characterization confines that there is no structure transition below and above T_(p). All these results suggest that the nonmagnetic transition of SrCu_(4-x)P_(2) could be associated with structural distortion.

Bulging Distortion of Austenitic Stainless Steel Sheet on the Partially Penetrated Side of Non-Penetration Lap Laser Welding Joint

Non-penetration laser welding of lap joints in austenitic stainless steel sheets is commonly preferred in fields where the surface quality is of utmost importance.However,the application of non-penetration welded austenitic stainless steel parts is limited owing to the micro bulging distortion that occurs on the back surface of the partial penetration side.In this paper,non-penetration lap laser welding experiments,were conducted on galvanized and SUS304 austenitic stainless steel plates using a fiber laser,to investigate the mechanism of bulging distortion.A comparative experiment of DC01 galvanized steel-Q235 carbon steel lap laser welding was carried out,and the deflection and distortion profile of partially penetrated side of the sheets were measured using a noncontact laser interferometer.In addition,the cold-rolled SUS304 was subjected to heat holding at different temperatures and water quenching after bending to characterize its microstructure under tensile and compressive stress.The results show that,during the heating stage of the thermal cycle of laser lap welding,the partial penetration side of the SUS304 steel sheet generates compressive stress,which extrudes the material in the heat-affected zone to the outside of the back of the SUS304 steel sheet,thereby forming a bulge.The findings of these experiments can be of great value for controlling the distortion of the partial penetrated side of austenitic stainless steel sheet during laser non-penetration lap welding.

Cross-section distortion and springback characteristics of double-cavity aluminum profile in force controlled stretch-bending

3D elastic-plastic FE model for simulating the force controlled stretch-bending process of double-cavity aluminum profile was established using hybrid explicit−implicit solvent method.Considering the computational accuracy and efficiency,the optimal choices of numerical parameters and algorithms in FE modelling were determined.The formation mechanisms of cross-section distortion and springback were revealed.The effects of pre-stretching,post-stretching,friction,and the addition of internal fillers on forming quality were investigated.The results show that the stress state of profile in stretch-bending is uniaxial with only a circumferential stress.The stress distribution along the length direction of profile is non-uniform and the maximum tensile stress is located at a certain distance away from the center of profile.As aluminum profile is gradually attached to bending die,the distribution characteristic of cross-section distortion along the length direction of profile changes from V-shape to W-shape.After unloading the forming tools,cross-section distortion decreases obviously due to the stress relaxation,with a maximum distortion difference of 13%before and after unloading.As pre-stretching and post-stretching forces increase,cross-section distortion increases gradually,while springback first decreases and then remains unchanged.With increasing friction between bending die and profile,cross-section distortion slightly decreases,while springback increases.Cross-section distortion decreases by 83%with adding PVC fillers into the cavities of profile,while springback increases by 192.2%.

Channel estimation in integrated radar and communication systems with power amplifier distortion

To reduce the negative impact of the power amplifier(PA)nonlinear distortion caused by the orthogonal frequency division multiplexing(OFDM)waveform with high peak-to-average power ratio(PAPR)in integrated radar and communication(RadCom)systems is studied,the channel estimation in passive sensing scenarios.Adaptive channel estimation methods are proposed based on different pilot patterns,considering nonlinear distortion and channel sparsity.The proposed methods achieve sparse channel results by manipulating the least squares(LS)frequency-domain channel estimation results to preserve the most significant taps.The decision-aided method is used to optimize the sparse channel results to reduce the effect of nonlinear distortion.Numerical results show that the channel estimation performance of the proposed methods is better than that of the conventional methods under different pilot patterns.In addition,the bit error rate performance in communication and passive radar detection performance show that the proposed methods have good comprehensive performance.

Computational Quantification of Map Projection Distortion by Fractal Dimension of Coastlines

Maps, essential tools for portraying the Earth’s surface, inherently introduce distortions to geographical features. While various quantification methods exist for assessing these distortions, they often fall short when evaluating actual geographic features. In our study, we took a novel approach by analyzing map projection distortion from a geometric perspective. We computed the fractal dimensions of different stretches of coastline before and after projection using the divide-and-conquer algorithm and image processing. Our findings revealed that map projections, even when preserving basic shapes, inevitably stretch and compress coastlines in diverse directions. This analysis method provides a more realistic and practical way to measure map-induced distortions, with significant implications for cartography, geographic information systems (GIS), and geomorphology. By bridging the gap between theoretical analysis and real-world features, this method greatly enhances accuracy and practicality when evaluating map projections.

三色膏联合PRICE疗法治疗急性踝关节Ⅰ和Ⅱ度扭伤的临床效果

目的探讨三色膏联合PRICE疗法治疗急性踝关节Ⅰ、Ⅱ度扭伤的临床效果。方法选取2022年2月至2023年5月上海市嘉定区中医医院骨伤科收治的52例Ⅰ、Ⅱ度急性踝关节扭伤患者作为研究对象,其中急诊患者35例,门诊患者17例,采用随机数字表法将其分为对照组和观察组,每组均失访1例,两组各25例纳入统计。对照组采用PRICE疗法治疗,观察组采用三色膏联合PRICE疗法,两组患者均治疗1周,治疗结束后,比较两组患者治疗前和治疗后第1、3周的视觉模拟评分法(VAS)评分及Mazur功能评分。结果52例患者中50例得到随访,随访时间不短于4周。治疗1、3周后,两组患者的VAS评分低于本组治疗前,Mazur功能评分高于本组治疗前,观察组的VAS评分低于对照组,Mazur功能评分高于对照组,差异有统计学意义(P<0.05)。结论三色膏联合PRICE疗法治疗急性踝关节Ⅰ、Ⅱ度扭伤可以获得更好的疗效,具有重要的临床价值和推广意义。

DISTORTION THEOREMS FOR CLASSES OF g-PARAMETRIC STARLIKE MAPPINGS OF REAL ORDER IN C^(n)

In this paper,we define the class S_(g)^(BX)of g-parametric starlike mappings of real order γ on the unit ball BX in a complex Banach space X,where g is analytic and satisfies certain conditions.By establishing the distortion theorem of the Fr´echet-derivative type of S_(g)^(BX)with a weak restrictive condition,we further obtain the distortion results of the Jacobi-determinant type and the Fr´echet-derivative type for the corresponding classes(compared with S_(g)^(BX))defined on the unit polydisc(resp.unit ball with the arbitrary norm)in the space of n-dimensional complex variables,n≥2.Our results extend the classic distortion theorem of holomorphic functions from the case in one-dimensional complex space to the case in the higher dimensional complex space.The main theorems also generalize and improve some recent works.

Price distortions and municipal bonds premiums:evidence from Switzerland

This study examines the pricing of municipal bonds before and after a currency shock in Switzerland.Two approaches are used to decompose the municipal to treasuries bond spreads into liquidity,maturity,and default risk premiums.The first approach is the model of the cross-sectional instrumental variables,and the second approach is the model of the instrumental variables with panel data.This study examines the composition of spreads for both approaches,in three scenarios:before,throughout,and after the currency shock.The study performed Durbin-Wu-Hausman tests for each decisive model to verify endogeneity issues,including the Lagrangian Multiplier test,the Cragg-Donald Wald F statistic to confirm the relationship of instrumental and endogenous variables,and the structural break test(Bai-Perron test)to determine the existence of structural breaks in bond distortions.This study finds that the currency price distortions of the Swiss franc in January 2015 made long-run changes in the composition of the municipal bond spreads.This research contributes to the understanding of municipal bond pricing by showing that default risk accounts for a large portion of the municipal bond spread,while maturity risk plays a lesser role.According to our empirical findings,unexpected large currency price shocks may have long-term implications on the municipal bond spreads.

Out-of-plane weak ferromagnetism at room temperature in lattice-distortion non-collinear antiferromagnet of single-crystal Mn_(3)Sn

Out-of-plane weak ferromagnetic(OWFM)spin arrangements with topological properties can realize a series of interesting physical properties.However,this spin structure tends to exist at low temperatures.The OWFM structure can also be induced at room temperature by hydrostatic pressure,whereas this isotropic approach tends to form helical AFM structures.We report the OWFM spin arrangement in single crystal Mn_(3)Sn by an anisotropic strategy of high-stressconstrained compression deformation at room temperature.Both experimental and theoretical simulation results show that the alignment of the OWFM spin structure is due to the distortion of the atomic scale caused by the strain energy during deformation.The OWFM spin arrangement can significantly change the magnetic property of Mn_(3)Sn.As a result,the remanent magnetization M_(r)for the deformed sample(0.056μ_(B)/f.u.)is about eleven times that for the pre-deformed sample(0.005μ_(B)/f.u.),and the coercivity(H_(c))increases from 0 k Oe(pre-deformed sample)to 6.02 k Oe(deformed sample).Our findings provide a way to generate the OWFM spin structure at room temperature and may give fresh ideas for creating antiferromagnetic materials with excellent physical properties.

Distortion Evaluation of EMP Sensors Using Associated-Hermite Functions

Electromagnetic pulse(EMP)is a kind of transient electromagnetic phenomenon with short rise time of the leading edge and wide spectrum,which usually disrupts communications and damages electronic equipment and system.It is challenging for an EMP sensor to measure a wideband electromagnetic pulse without distortion for the whole spectrum.Therefore,analyzing the distortion of EMP measurement is crucial to evaluating the sensor distortion characteristics and correcting the measurement results.Waveform fidelity is usually employed to evaluate the distortion of an antenna.However,this metric depends on specific signal waveforms,thus is unsuitable for evaluating and analyzing the distortion of EMP sensors.In this paper,an associated-hermite-function based distortion analysis method including system transfer matrices and distortion rates is proposed,which is general and independent from individual waveforms.The system transfer matrix and distortion rate can be straightforwardly calculated by the signal orthogonal transformation coefficients using associated-hermite functions.Distortion of a sensor vs.frequency is then visualized via the system transfer matrix,which is convenient in quantitative analysis of the distortion.Measurement of a current probe,a coaxial pulse voltage probe and a B-field sensor were performed,based on which the feasibility and effectiveness of the proposed distortion analysis method is successfully verified.

Understanding the Relationship Between Shrinking Cities and Land Prices:Spatial Pattern,Effectiveness,and Policy Implications

Urban shrinkage has emerged as a widespread phenomenon globally and has a significant impact on land,particularly in terms of land use and price.This study focuses on 2851 county-level cities in China in 2005–2018(excluding Hong Kong,Macao,Taiwan,and‘no data’areas in Qinhai-Tibet Plateau)as the fundamental units of analysis.By employing nighttime light(NTL)data to identify shrinking cities,the propensity score matching(PSM)model was used to quantitatively examine the impact of shrinking cities on land prices,and evaluate the magnitude of this influence.The findings demonstrate the following:1)there were 613 shrinking cities in China,with moderate shrinkage being the most prevalent and severe shrinkage being the least.2)Regional disparities are evident in the spatial distribution of shrinking cities,especially in areas with diverse terrain.3)The spatial pattern of land price exhibits a significant correlated to the economic and administrative levels.4)Shrinking cities significantly negatively impact on the overall land price(ATT=–0.1241,P<0.05).However,the extent of the effect varies significantly among different spatial regions.This study contributes novel insights into the investigation of land prices and shrinking cities,ultimately serving as a foundation for government efforts to promote the sustainable development of urban areas.

Distortion product otoacoustic emissions in newborn babies with and without late-term maternal iron deficiency anaemia

Background:Studies on animals have demonstrated that maternal iron deficiency anaemia(IDA)could result in decreased cochlear sensory hair cells and reduced amplitudes of distortion-product otoacoustic emissions(DPOAEs)of young guinea pigs.Thus,it is essential to study the functioning of cochlear hair cells using DPOAEs in human newborn babies with maternal IDA.The current study explores maternal IDA’s effect on DPOAEs in newborn babies.Method:A total of 110 newborn babies with gestational age≥34 weeks were considered and a‘betweensubjects’design was used.The participants were divided into 3 groups-“Normal”(61 babies without maternal IDA),“Mild”(28 babies with mild maternal IDA)and“Moderate”(21 babies with moderate maternal IDA).The cord blood was collected and the DPOAEs were recorded for each baby for a range of frequencies(1 k 8 kHz)and a range of intensities(7040 dB SPL in 10 dB steps).Results:The analysis of both DP-gram and DP input-output(I/O)function showed that there was no significant difference(p>0.05)across the normal,mild,and moderate groups in the overall presence of DPOAEs as well as the amplitude across frequencies or intensities(7040 dB SPL).Also,the overall correlation of RBC indices with DPOAE amplitude across frequencies as well as the slope of the I/O function showed no relationship.Conclusion:The current study concludes that there is no effect of late-term maternal IDA on the DPOAEs of newborn babies.

Brent vs.West Texas Intermediate in the US petro derivatives price formation

In this paper,we apply the spatial panel model to explore the relationship between the dynamic of two types of crude oil prices(WTI and Brent crude oil)and their refined products over time.Considering the turbulent months of 2011,when Cushing Oklahoma had reached capacity and the crude oil export ban removal in 2015 as breakpoints,we apply this method both in the full sample and the three resultant regimes.First,results suggest our results show that both WTI and Brent display very similar behaviour with the refined products.Second,when attending to each regime,results derived from the first and third regimes are quite similar to the full sample results.Therefore,during the second regime,Brent crude oil became the benchmark in the petrol market,and it influenced the distillate products.Furthermore,our model can let us determine the price-setters and price-followers in the price formation mechanism through refined products.These results possess important considerations to policymakers and the market participants and the price formation.

Economic Resilience in Bangladesh: Analyzing Household Well-Being amidst Price Hikes through ANOVA and Paired Sample t-Test Insights

This study delves into the multifaceted impact of price hikes on the standard of living in Bangladesh, with a specific focus on distinct socioeconomic segments. Amidst Bangladesh’s economic growth, the challenges of rising inflation and increased living costs have become pressing concerns. Employing a mixed-methods approach combines quantitative data from a structured survey with qualitative insights from in-depth interviews and focused group discussions to analyze the repercussions of price hikes. Stratified random sampling ensures representation across affluent, middle-class, and economically disadvantaged groups. Utilizing data [1] from 2020 to November 2023 on the yearly change in retail prices of essential commodities, analysis reveals significant demographic shifts, occupational changes, and altered asset ownership patterns among households. The vulnerable population, including daily wage laborers and low-income individuals, is disproportionately affected by adjustments in consumption, income generation, and living arrangements. Statistical analyses, including One-Way ANOVA and Paired Sample t-tests, illuminate significant mean differences in strategies employed during price hikes. Despite challenges, the prioritization of education remains evident, emphasizing its resilience in the face of economic hardships. The result shows that price hikes, especially in essential items, lead to substantial adjustments in living costs, with items like onions, garlic, and ginger experiencing significant increases of 275%, 108%, and 483%, respectively.

Flexible Load Participation in Peaking Shaving and Valley Filling Based on Dynamic Price Incentives

Considering the widening of the peak-valley difference in the power grid and the difficulty of the existing fixed time-of-use electricity price mechanism in meeting the energy demand of heterogeneous users at various moments or motivating users,the design of a reasonable dynamic pricing mechanism to actively engage users in demand response becomes imperative for power grid companies.For this purpose,a power grid-flexible load bilevel model is constructed based on dynamic pricing,where the leader is the dispatching center and the lower-level flexible load acts as the follower.Initially,an upper-level day-ahead dispatching model for the power grid is established,considering the lowest power grid dispatching cost as the objective function and incorporating the power grid-side constraints.Then,the lower level comprehensively considers the load characteristics of industrial load,energy storage,and data centers,and then establishes a lower-level flexible load operation model with the lowest user power-consuming cost as the objective function.Finally,the proposed method is validated using the IEEE-118 system,and the findings indicate that the dynamic pricing mechanism for peaking shaving and valley filling can effectively guide users to respond actively,thereby reducing the peak-valley difference and decreasing users’purchasing costs.

Production Chain Length and PPI-CPI Divergence:Analysis Based on the Global Input-output Price Model

Productivity and international energy price shocks are reflected in PPI and CPI via industrial chains.China’s in-depth participation into the global value chains has increasingly lengthened its industrial production chains.The question is how the changing length of production chains will affect CPI and PPI,as well as CPI-PPI correlation?By constructing a global input-output price model,this paper offers a theoretical discussion on the impact of production chain length on the CPI-PPI divergence.Our findings suggest that the price shock of international bulk commodities has a greater impact on China’s PPI than that on CPI.The effects on both China’s PPI and CPI estimated by using the single-country input-output model are higher than the results estimated with the global input-output model.However,the difference between CPI and PPI variations estimated with the global input-output model is greater than the result estimated with the single-country input-output model,which supports the view that the lengthening of production chains,especially international production chains,leads to a divergence between CPI and PPI.Empirical results based on cross-national panel data also suggest that the lengthening of production chains has reduced the CPI-PPI correlation for countries,i.e.the lengthening of production chains has increased the PPI-CPI divergence.That is to say,policymakers should target not just CPI in maintaining price stability,but instead focus on the stability of both PPI and CPI.Efforts can be made to proactively adjust the price index system,and formulate the industrial chain price index.

Price prediction of power transformer materials based on CEEMD and GRU

The rapid growth of the Chinese economy has fueled the expansion of power grids.Power transformers are key equipment in power grid projects,and their price changes have a significant impact on cost control.However,the prices of power transformer materials manifest as nonsmooth and nonlinear sequences.Hence,estimating the acquisition costs of power grid projects is difficult,hindering the normal operation of power engineering construction.To more accurately predict the price of power transformer materials,this study proposes a method based on complementary ensemble empirical mode decomposition(CEEMD)and gated recurrent unit(GRU)network.First,the CEEMD decomposed the price series into multiple intrinsic mode functions(IMFs).Multiple IMFs were clustered to obtain several aggregated sequences based on the sample entropy of each IMF.Then,an empirical wavelet transform(EWT)was applied to the aggregation sequence with a large sample entropy,and the multiple subsequences obtained from the decomposition were predicted by the GRU model.The GRU model was used to directly predict the aggregation sequences with a small sample entropy.In this study,we used authentic historical pricing data for power transformer materials to validate the proposed approach.The empirical findings demonstrated the efficacy of our method across both datasets,with mean absolute percentage errors(MAPEs)of less than 1%and 3%.This approach holds a significant reference value for future research in the field of power transformer material price prediction.