Hydrogel scaffolds have numerous potential applications in the tissue engineering field.However,tough hydrogel scaffolds implanted in vivo are seldom reported because it is difficult to balance biocompatibility and hi...Hydrogel scaffolds have numerous potential applications in the tissue engineering field.However,tough hydrogel scaffolds implanted in vivo are seldom reported because it is difficult to balance biocompatibility and high mechanical properties.Inspired by Chinese ramen,we propose a universal fabricating method(printing-P,training-T,cross-linking-C,PTC&PCT)for tough hydrogel scaffolds to fill this gap.First,3D printing fabricates a hydrogel scaffold with desired structures(P).Then,the scaffold could have extraordinarily high mechanical properties and functional surface structure by cycle mechanical training with salting-out assistance(T).Finally,the training results are fixed by photo-cross-linking processing(C).The tough gelatin hydrogel scaffolds exhibit excellent tensile strength of 6.66 MPa(622-fold untreated)and have excellent biocompatibility.Furthermore,this scaffold possesses functional surface structures from nanometer to micron to millimeter,which can efficiently induce directional cell growth.Interestingly,this strategy can produce bionic human tissue with mechanical properties of 10 kPa-10 MPa by changing the type of salt,and many hydrogels,such as gelatin and silk,could be improved with PTC or PCT strategies.Animal experiments show that this scaffold can effectively promote the new generation of muscle fibers,blood vessels,and nerves within 4 weeks,prompting the rapid regeneration of large-volume muscle loss injuries.展开更多
Direct air capture(DAC)of CO_(2)plays an indispensable role in achieving carbon-neutral goals as one of the key negative emission technologies.Since large air flows are required to capture the ultradilute CO_(2)from t...Direct air capture(DAC)of CO_(2)plays an indispensable role in achieving carbon-neutral goals as one of the key negative emission technologies.Since large air flows are required to capture the ultradilute CO_(2)from the air,lab-synthesized adsorbents in powder form may cause unacceptable gas pressure drops and poor heat and mass transfer efficiencies.A structured adsorbent is essential for the implementation of gas-solid contactors for cost-and energy-efficient DAC systems.In this study,efficient adsorbent poly(ethyleneimine)(PEI)-functionalized Mg-Al-CO_(3)layered double hydroxide(LDH)-derived mixed metal oxides(MMOs)are three-dimensional(3D)printed into monoliths for the first time with more than 90%adsorbent loadings.The printing process has been optimized by initially printing the LDH powder into monoliths followed by calcination into MMO monoliths.This structure exhibits a 32.7%higher specific surface area and a 46.1%higher pore volume,as compared to the direct printing of the MMO powder into a monolith.After impregnation of PEI,the monolith demonstrates a large adsorption capacity(1.82 mmol/g)and fast kinetics(0.7 mmol/g/h)using a CO_(2)feed gas at 400 ppm at 25℃,one of the highest values among the shaped DAC adsorbents.Smearing of the amino-polymers during the post-printing process affects the diffusion of CO_(2),resulting in slower adsorption kinetics of pre-impregnation monoliths compared to post-impregnation monoliths.The optimal PEI/MeOH ratio for the post-impregnation solution prevents pores clogging that would affect both adsorption capacity and kinetics.展开更多
Introduction 3D bioprinting offers a unique biofabrication platform that allows the generation of functional tissue constructs in a spatially/geometrically controlled and automated manner using a 3 D printer and bioin...Introduction 3D bioprinting offers a unique biofabrication platform that allows the generation of functional tissue constructs in a spatially/geometrically controlled and automated manner using a 3 D printer and bioink.Bioink serves as the carrier medium that provides the ideal physico-mechanical characteristics for printability,shape fidelity,and support;and a biological microenvironment for the living cells prior to,during.展开更多
In recent years,scientists have become increasingly concerned in recycling electronic trash,particularly waste printed circuit boards(WPCBs).Previous research has indicated that the presence of Cu impacts the pyrolysi...In recent years,scientists have become increasingly concerned in recycling electronic trash,particularly waste printed circuit boards(WPCBs).Previous research has indicated that the presence of Cu impacts the pyrolysis of WPCBs.However,there may be errors in the experimental results,as printed circuit boards(PCBs)with copper and those without copper are produced differently.For this experiment,we blended copper powder with PCB nonmetallic resin powder in various ratios to create the samples.The apparent kinetics and pyrolysis properties of four resin powders with varying copper concentrations were compared using nonisothermal thermogravimetric analysis(TG)and thermal pyrolysis-gas chromatography mass spectrometry(Py-GC/MS).From the perspective of kinetics,the apparent activation energy of the resin powder in the pyrolysis reaction shows a rise(0.1<a<0.2)-stable(0.2<a<0.4)-accelerated increase(0.4<a<0.8)-decrease(0.8<a<0.9)process.After adding copper powder,the apparent activation energy changes more obviously when(0.2<a<0.4).In the early stage of the pyrolysis reaction(0.1<a<0.6),the apparent activation energy is reduced,but when a?0.8,it is much higher than that of the resin sample without copper.Additionally,it is discovered using thermogravimetric analysis and Py-GC/MS that copper shortens the temperature range of the primary pyrolysis reaction and prevents the creation of compounds containing bromine.This inhibition will raise the temperature at which compounds containing bromine first form,and it will keep rising as the copper level rises.The majority of the circuit board molecules have lower bond energies when copper is present,according to calculations performed using the Gaussian09 software,which promotes the pyrolysis reaction.展开更多
BACKGROUND Dentition defect,a common clinical oral disease developed in humans,not only causes masticatory dysfunction and articulation difficulties but also affects facial appearance and increases the burden on the i...BACKGROUND Dentition defect,a common clinical oral disease developed in humans,not only causes masticatory dysfunction and articulation difficulties but also affects facial appearance and increases the burden on the intestinal tract.Restorative treatment is the primary option for this disease.However,traditional restorations have many drawbacks,such as mismatch with the body,low reliability,and incomplete occlusal function recovery.AIM to analyze the efficacy of orthodontics combined with 3D printing guide plate implant restoration in treating patients with dentition defects and its influence on masticatory and phonic functions.METHODS A prospective study was carried out in 86 patients with dentition defects who received implant prosthesis after orthodontic treatment in our hospital between January 2018 and January 2019.Those patients were divided into a control group and an intervention group with 43 patients in each group using a random number table.The control group received traditional implant restoration,whereas the intervention group received 3D printing guide plate implant restoration.Treatment outcomes,cosmetic appearance,dental function,implant deviation,and quality of life were compared between the two groups.RESULTS The overall response rate in the intervention group was significantly higher than that in the control group(95.35%vs 81.40%,χ^(2)=4.071,P=0.044).The number of cases with neatly trimmed cosmetic appearance(χ^(2)=4.497,P=0.034),complete coverage(χ^(2)=4.170,P=0.041),and normal occlusion(χ^(2)=5.512,P=0.019)in the intervention group was higher than that in the control group.After treatment,mastication,swallowing,and articulation were significantly improved in both groups.Masticatory(t=2.980,P=0.004),swallowing(t=2.199,P=0.031),and phonic functions(t=3.950,P=0.004)were better in the intervention group than those in the control group.The deviation value and the deviation angle(t=5.440,P=0.000)at the top(t=6.320,P=0.000)and middle parts of the implants(t=22.295,P=0.000)in the intervention group were lower than those in the control group after treatment.Functional limitations,psychosocial and physical pain and discomfort,and total scores decreased in both groups.The functional limitation(t=2.379,P=0.020),psychosocial(t=2.420,P=0.000),physical pain and discomfort(t=6.581,P=0.000),and total scores(t=2.140,P=0.035)were lower in the intervention group than those in the control group.CONCLUSION Orthodontic treatment combined with 3D printing guide plate implant restoration can significantly improve the masticatory and phonic functions,quality of life,and psychological health of patients with dentition defects.Therefore,it is highly recommended in clinic application.展开更多
Functional linguistics has become the most influential linguistic theory in the field of translation study since the last de cade of 20th century.However,for the complexity of the context,it is uncommon and insufficie...Functional linguistics has become the most influential linguistic theory in the field of translation study since the last de cade of 20th century.However,for the complexity of the context,it is uncommon and insufficient to explore literary texts.Draw ing a general picture of literary text translation from functional perspectives aims to probe into the functional modes of translation.展开更多
3D printing of functional energy storage devices is receiving escalating attention over the years due to the customizable manufacturing flexibility and imparted high areal and gravimetric energy density of three-dimen...3D printing of functional energy storage devices is receiving escalating attention over the years due to the customizable manufacturing flexibility and imparted high areal and gravimetric energy density of three-dimensional structured devices, which contribute to the creation of numerous new opportunities for futuristic electronics. Graphene-based inks are ideal elements for the realization of 3D printed energy storage devices if the attractive intrinsic physiochemical properties of graphene could be preserved. However, it is still a great challenge to prepare uniformly dispersed graphene-based materials with desired rheological properties for 3D printing. Here we report a facile strategy for 3D printing of supercapacitors from a highly concentrated graphene oxide (GO) ink. The GO is properly dispersed and the ink fulfills the stringent rheological specifications for 3D printing. The printed GO electrode is functionalized with enhanced structural stability for proper reduction to graphene. The printed supercapacitors deliver the potential to linearly scale up in areal capacitance without jeopardizing the gravimetric capacitance when increasing printed layers. The results hold great promise for the construction of 3D structured energy storage devices that cater to the challenges from next-generation electronics.展开更多
Over millions of years of evolution,nature has created organisms with overwhelming performances due to their unique materials and structures,providing us with valuable inspirations for the development of next-generati...Over millions of years of evolution,nature has created organisms with overwhelming performances due to their unique materials and structures,providing us with valuable inspirations for the development of next-generation biomedical devices.As a promising new technology,3D printing enables the fabrication of multiscale,multi-material,and multi-functional threedimensional(3D)biomimetic materials and structures with high precision and great flexibility.The manufacturing challenges of biomedical devices with advanced biomimetic materials and structures for various applications were overcome with the flourishing development of 3D printing technologies.In this paper,the state-of-the-art additive manufacturing of biomimetic materials and structures in the field of biomedical engineering were overviewed.Various kinds of biomedical applications,including implants,lab-on-chip,medicine,microvascular network,and artificial organs and tissues,were respectively discussed.The technical challenges and limitations of biomimetic additive manufacturing in biomedical applications were further investigated,and the potential solutions and intriguing future technological developments of biomimetic 3D printing of biomedical devices were highlighted.展开更多
Background:Enterotoxigenic Escherichia coli(ETEC)F4 commonly colonizes the small intestine and releases enterotoxins that impair the intestinal barrier function and trigger inflammatory responses.Although Bacillus lic...Background:Enterotoxigenic Escherichia coli(ETEC)F4 commonly colonizes the small intestine and releases enterotoxins that impair the intestinal barrier function and trigger inflammatory responses.Although Bacillus licheniformis(B.licheniformis)has been reported to enhance intestinal health,it remains to be seen whether there is a functional role of B.licheniformis in intestinal inflammatory response in intestinal porcine epithelial cell line(IPEC-J2)when stimulated with ETEC F4.Methods:In the present study,the effects of B.licheniformis PF9 on the release of pro-inflammation cytokines,cell integrity and nuclear factor-κB(NF-κB)activation were evaluated in ETEC F4-induced IPEC-J2 cells.Results:B.licheniformis PF9 treatment was capable of remarkably attenuating the expression levels of inflammation cytokines tumor necrosis factor-α(TNF-α),interleukin(IL)-8,and IL-6 during ETEC F4 infection.Furthermore,the gene expression of Toll-like receptor 4(TLR4)-mediated upstream related genes of NF-κB signaling pathway has been significantly inhibited.These changes were accompanied by significantly decreased phosphorylation of p65 NF-κB during ETEC F4 infection with B.licheniformis PF9 treatment.The immunofluorescence and western blotting analysis revealed that B.licheniformis PF9 increased the expression levels of zona occludens 1(ZO-1)and occludin(OCLN)in ETEC F4-infected IPEC-J2 cells.Meanwhile,the B.licheniformis PF9 could alleviate the injury of epithelial barrier function assessed by the trans-epithelial electrical resistance(TEER)and cell permeability assay.Interestingly,B.licheniformis PF9 protect IPEC-J2 cells against ETEC F4 infection by decreasing the gene expressions of virulence-related factors(including luxS,estA,estB,and elt)in ETEC F4.Conclusions:Collectively,our results suggest that B.licheniformis PF9 might reduce inflammation-related cytokines through blocking the NF-κB signaling pathways.Besides,B.licheniformis PF9 displayed a significant role in the enhancement of IPEC-J2 cell integrity.展开更多
The continual demand for modern optoelectronics with a high integration degree and customized functions has increased requirements for nanofabrication methods with high resolution,freeform,and mask-free.Meniscus-on-de...The continual demand for modern optoelectronics with a high integration degree and customized functions has increased requirements for nanofabrication methods with high resolution,freeform,and mask-free.Meniscus-on-demand three-dimensional(3D)printing is a high-resolution additive manufacturing technique that exploits the ink meniscus formed on a printer nozzle and is suitable for the fabrication of micro/nanoscale 3D architectures.This method can be used for solution-processed 3D patterning of materials at a resolution of up to100 nm,which provides an excellent platform for fundamental scientific studies and various practical applications.This review presents recent advances in meniscus-on-demand 3D printing,together with historical perspectives and theoretical background on meniscus formation and stability.Moreover,this review highlights the capabilities of meniscus-on-demand 3D printing in terms of printable materials and potential areas of application,such as electronics and photonics.展开更多
Because of the complex nerve anatomy and limited regeneration ability of natural tissue,the current treatment effect for long-distance peripheral nerve regeneration and spinal cord injury(SCI)repair is not satisfactor...Because of the complex nerve anatomy and limited regeneration ability of natural tissue,the current treatment effect for long-distance peripheral nerve regeneration and spinal cord injury(SCI)repair is not satisfactory.As an alternative method,tissue engineering is a promising method to regenerate peripheral nerve and spinal cord,and can provide structures and functions similar to natural tissues through scaffold materials and seed cells.Recently,the rapid development of 3D printing technology enables researchers to create novel 3D constructs with sophisticated structures and diverse functions to achieve high bionics of structures and functions.In this review,we first outlined the anatomy of peripheral nerve and spinal cord,as well as the current treatment strategies for the peripheral nerve injury and SCI in clinical.After that,the design considerations of peripheral nerve and spinal cord tissue engineering were discussed,and various 3D printing technologies applicable to neural tissue engineering were elaborated,including inkjet,extrusion-based,stereolithography,projection-based,and emerging printing technologies.Finally,we focused on the application of 3D printing technology in peripheral nerve regeneration and spinal cord repair,as well as the challenges and prospects in this research field.展开更多
There are various clinical treatments for traumatic brain injury,including surgery,drug therapy,and rehabilitation therapy;howeve r,the therapeutic effects are limited.Scaffolds combined with exosomes represent a prom...There are various clinical treatments for traumatic brain injury,including surgery,drug therapy,and rehabilitation therapy;howeve r,the therapeutic effects are limited.Scaffolds combined with exosomes represent a promising but challenging method for improving the repair of traumatic brain injury.In this study,we determined the ability of a novel 3D-printed collagen/chitosan scaffold loaded with exosomes derived from neural stem cells pretreated with insulin-like growth factor-1(3D-CC-INEXOS) to improve traumatic brain injury repair and functional recove ry after traumatic brain injury in rats.Composite scaffolds comprising collagen,chitosan,and exosomes derived from neural stem cells pretreated with insulin-like growth fa ctor-1(INEXOS) continuously released exosomes for 2weeks.Transplantation of 3D-CC-INExos scaffolds significantly improved motor and cognitive functions in a rat traumatic brain injury model,as assessed by the Morris water maze test and modified neurological seve rity scores.In addition,immunofluorescence staining and transmission electron microscopy showed that3D-CC-INExos implantation significantly improved the recove ry of damaged nerve tissue in the injured area.In conclusion,this study suggests that transplanted3D-CC-INExos scaffolds might provide a potential strategy for the treatment of traumatic brain injury and lay a solid foundation for clinical translation.展开更多
BACKGROUND Colorectal cancer(CRC)is one of the most common malignancies worldwide.AIM To explore the expression of microRNA miR-19a-3p and Forkhead box F2(FOXF2)in patients with CRC and the relevant mechanisms.METHODS...BACKGROUND Colorectal cancer(CRC)is one of the most common malignancies worldwide.AIM To explore the expression of microRNA miR-19a-3p and Forkhead box F2(FOXF2)in patients with CRC and the relevant mechanisms.METHODS Sixty-two CRC patients admitted to the hospital were enrolled into the study group,and sixty healthy people from the same period were assigned to the control group.Elbow venous blood was sampled from the patients and healthy individuals,and blood serum was saved for later analysis.MiR-19a-3p mimics,miR-19a-3p inhibitor,miR-negative control,small interfering-FOXF2,and short hairpin-FOXF2 were transfected into HT29 and HCT116 cells.Then quantitative polymerase chain reaction was performed to quantify the expression of miR-19a-3p and FOXF2 in HT29 and HCT116 cells,and western blot(WB)analysis was conducted to evaluate the levels of FOXF2,glycogen synthase kinase 3 beta(GSK-3β),phosphorylated GSK-3β(p-GSK-3β),β-catenin,p-β-catenin,α-catenin,Ncadherin,E-cadherin,and vimentin.The MTT,Transwell,and wound healing assays were applied to analyze cell proliferation,invasion,and migration,respectively,and the dual luciferase reporter assay was used to determine the correlation of miR-19a-3p with FOXF2.RESULTS The patients showed high serum levels of miR-19a-3p and low levels of FOXF2,and the area under the curves of miR-19a-3p and FOXF2 were larger than 0.8.MiR-19a-3p and FOXF2 were related to sex,tumor size,age,tumor-nodemetastasis staging,lymph node metastasis,and differentiation of CRC patients.Silencing of miR-19a-3p and overexpression of FOXF2 suppressed the epithelialmesenchymal transition,invasion,migration,and proliferation of cells.WB analysis revealed that silencing of miR-19a-3p and FOXF2 overexpression significantly suppressed the expression of p-GSK-3β,β-catenin,N-cadherin,and vimentin;and increased the levels of GSK-3β,p-β-catenin,α-catenin,and Ecadherin.The dual luciferase reporter assay confirmed that there was a targeted correlation of miR-19a-3p with FOXF2.In addition,a rescue experiment revealed that there were no differences in cell proliferation,invasion,and migration in HT29 and HCT116 cells co-transfected with miR-19a-3p-mimics+sh-FOXF2 and miR-19a-3p-inhibitor+si-FOXF2 compared to the miR-negative control group.CONCLUSION Inhibiting miR-19a-3p expression can upregulate the FOXF2-mediated Wnt/β-catenin signaling pathway,thereby affecting the epithelial-mesenchymal transition,proliferation,invasion,and migration of cells.Thus,miR-19a-3p is likely to be a therapeutic target in CRC.展开更多
A new maximal function is introduced in the dual spaces of test function spaces on spaces of homogeneous type. Using this maximal function, we get new characterization of atomic H^p spaces.
This paper uses the generalised gradient approximation based on density functional theory to analyse the geometric structure and properties of the 3d transition metal atom doped endohedral fullerene M@C20F20 (M = Sc...This paper uses the generalised gradient approximation based on density functional theory to analyse the geometric structure and properties of the 3d transition metal atom doped endohedral fullerene M@C20F20 (M = Sc-Ni). The geometric optimization shows that the cage centre is the most stable position for M, forming the structure named as M@C20F20-4. The inclusion energy, zero-point energy, and energy gap calculations tell us that Ni@C20F20-4 should be thermodynamically and kinetically stablest. M@C20F20-4 (M = Sc-Co) possesses high magnetic moments varied from 1 to 6 μB, while Ni@C20F20-4 is nonmagnetic. The Ni-C bond in Ni@C20F20-4 contains both the covalent and ionic characters.展开更多
Chemical doping is verified to be a promising strategy to regulate local electron distribution and further promote the poor intrinsic catalytic activity of graphdiyne.However,the current doping approach still faces pr...Chemical doping is verified to be a promising strategy to regulate local electron distribution and further promote the poor intrinsic catalytic activity of graphdiyne.However,the current doping approach still faces problems such as precise doping for creating active sites and the destruction of graphdiyne skeleton calling for high temperature.Here,we achieved charge redistribution on graphdiyne surface through molecule functionalization.A p-type molecule–F4 TCNQ(2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodime thane)was introduced and the site-defined functionalization was accomplished.Theoretical calculations showed that the charge transfer ability is improved and graphdiyne becomes positively charged.The oxygen reduction electrocatalysis was conducted as a proof of principle,where the electronic states of sp hybridized C active site was tuned toward favorable reaction intermediates’adsorption.Such work from both theoretical prediction and experimental validation,found that molecule functionalization is effective to promote the electrocatalytic oxygen reduction,which creates new possibilities for graphdiyne’s applications in different electrochemical reactions.展开更多
For Riemannian manifolds with a measure, we study the gradient estimates for positive smooth f-harmonic functions when the ∞-Bakry-Emery Ricci tensor and Ricci tensor are bounded from below, generalizing the classica...For Riemannian manifolds with a measure, we study the gradient estimates for positive smooth f-harmonic functions when the ∞-Bakry-Emery Ricci tensor and Ricci tensor are bounded from below, generalizing the classical ones of Yau (i.e., when : is constant).展开更多
基金supported by the Innovative Research Group Project of the National Natural Science Foundation of China(T2121004)Key Programme(52235007)National Outstanding Youth Foundation of China(52325504).
文摘Hydrogel scaffolds have numerous potential applications in the tissue engineering field.However,tough hydrogel scaffolds implanted in vivo are seldom reported because it is difficult to balance biocompatibility and high mechanical properties.Inspired by Chinese ramen,we propose a universal fabricating method(printing-P,training-T,cross-linking-C,PTC&PCT)for tough hydrogel scaffolds to fill this gap.First,3D printing fabricates a hydrogel scaffold with desired structures(P).Then,the scaffold could have extraordinarily high mechanical properties and functional surface structure by cycle mechanical training with salting-out assistance(T).Finally,the training results are fixed by photo-cross-linking processing(C).The tough gelatin hydrogel scaffolds exhibit excellent tensile strength of 6.66 MPa(622-fold untreated)and have excellent biocompatibility.Furthermore,this scaffold possesses functional surface structures from nanometer to micron to millimeter,which can efficiently induce directional cell growth.Interestingly,this strategy can produce bionic human tissue with mechanical properties of 10 kPa-10 MPa by changing the type of salt,and many hydrogels,such as gelatin and silk,could be improved with PTC or PCT strategies.Animal experiments show that this scaffold can effectively promote the new generation of muscle fibers,blood vessels,and nerves within 4 weeks,prompting the rapid regeneration of large-volume muscle loss injuries.
基金supported by the Shanghai Agricultural Science and Technology Program (2022-02-08-00-12-F01176)he National Natural Science Foundation of China (52006135)
文摘Direct air capture(DAC)of CO_(2)plays an indispensable role in achieving carbon-neutral goals as one of the key negative emission technologies.Since large air flows are required to capture the ultradilute CO_(2)from the air,lab-synthesized adsorbents in powder form may cause unacceptable gas pressure drops and poor heat and mass transfer efficiencies.A structured adsorbent is essential for the implementation of gas-solid contactors for cost-and energy-efficient DAC systems.In this study,efficient adsorbent poly(ethyleneimine)(PEI)-functionalized Mg-Al-CO_(3)layered double hydroxide(LDH)-derived mixed metal oxides(MMOs)are three-dimensional(3D)printed into monoliths for the first time with more than 90%adsorbent loadings.The printing process has been optimized by initially printing the LDH powder into monoliths followed by calcination into MMO monoliths.This structure exhibits a 32.7%higher specific surface area and a 46.1%higher pore volume,as compared to the direct printing of the MMO powder into a monolith.After impregnation of PEI,the monolith demonstrates a large adsorption capacity(1.82 mmol/g)and fast kinetics(0.7 mmol/g/h)using a CO_(2)feed gas at 400 ppm at 25℃,one of the highest values among the shaped DAC adsorbents.Smearing of the amino-polymers during the post-printing process affects the diffusion of CO_(2),resulting in slower adsorption kinetics of pre-impregnation monoliths compared to post-impregnation monoliths.The optimal PEI/MeOH ratio for the post-impregnation solution prevents pores clogging that would affect both adsorption capacity and kinetics.
基金financial supports from Agency for Science,Technology,and Research(A*STAR,Singapore)Advanced Manufacturing and Engineering Individual Research Grant(AME IRG)(Project ID:A1883c0013)。
文摘Introduction 3D bioprinting offers a unique biofabrication platform that allows the generation of functional tissue constructs in a spatially/geometrically controlled and automated manner using a 3 D printer and bioink.Bioink serves as the carrier medium that provides the ideal physico-mechanical characteristics for printability,shape fidelity,and support;and a biological microenvironment for the living cells prior to,during.
基金supported by the National Key Research and Development Program of China(2018YFC1902504).
文摘In recent years,scientists have become increasingly concerned in recycling electronic trash,particularly waste printed circuit boards(WPCBs).Previous research has indicated that the presence of Cu impacts the pyrolysis of WPCBs.However,there may be errors in the experimental results,as printed circuit boards(PCBs)with copper and those without copper are produced differently.For this experiment,we blended copper powder with PCB nonmetallic resin powder in various ratios to create the samples.The apparent kinetics and pyrolysis properties of four resin powders with varying copper concentrations were compared using nonisothermal thermogravimetric analysis(TG)and thermal pyrolysis-gas chromatography mass spectrometry(Py-GC/MS).From the perspective of kinetics,the apparent activation energy of the resin powder in the pyrolysis reaction shows a rise(0.1<a<0.2)-stable(0.2<a<0.4)-accelerated increase(0.4<a<0.8)-decrease(0.8<a<0.9)process.After adding copper powder,the apparent activation energy changes more obviously when(0.2<a<0.4).In the early stage of the pyrolysis reaction(0.1<a<0.6),the apparent activation energy is reduced,but when a?0.8,it is much higher than that of the resin sample without copper.Additionally,it is discovered using thermogravimetric analysis and Py-GC/MS that copper shortens the temperature range of the primary pyrolysis reaction and prevents the creation of compounds containing bromine.This inhibition will raise the temperature at which compounds containing bromine first form,and it will keep rising as the copper level rises.The majority of the circuit board molecules have lower bond energies when copper is present,according to calculations performed using the Gaussian09 software,which promotes the pyrolysis reaction.
文摘BACKGROUND Dentition defect,a common clinical oral disease developed in humans,not only causes masticatory dysfunction and articulation difficulties but also affects facial appearance and increases the burden on the intestinal tract.Restorative treatment is the primary option for this disease.However,traditional restorations have many drawbacks,such as mismatch with the body,low reliability,and incomplete occlusal function recovery.AIM to analyze the efficacy of orthodontics combined with 3D printing guide plate implant restoration in treating patients with dentition defects and its influence on masticatory and phonic functions.METHODS A prospective study was carried out in 86 patients with dentition defects who received implant prosthesis after orthodontic treatment in our hospital between January 2018 and January 2019.Those patients were divided into a control group and an intervention group with 43 patients in each group using a random number table.The control group received traditional implant restoration,whereas the intervention group received 3D printing guide plate implant restoration.Treatment outcomes,cosmetic appearance,dental function,implant deviation,and quality of life were compared between the two groups.RESULTS The overall response rate in the intervention group was significantly higher than that in the control group(95.35%vs 81.40%,χ^(2)=4.071,P=0.044).The number of cases with neatly trimmed cosmetic appearance(χ^(2)=4.497,P=0.034),complete coverage(χ^(2)=4.170,P=0.041),and normal occlusion(χ^(2)=5.512,P=0.019)in the intervention group was higher than that in the control group.After treatment,mastication,swallowing,and articulation were significantly improved in both groups.Masticatory(t=2.980,P=0.004),swallowing(t=2.199,P=0.031),and phonic functions(t=3.950,P=0.004)were better in the intervention group than those in the control group.The deviation value and the deviation angle(t=5.440,P=0.000)at the top(t=6.320,P=0.000)and middle parts of the implants(t=22.295,P=0.000)in the intervention group were lower than those in the control group after treatment.Functional limitations,psychosocial and physical pain and discomfort,and total scores decreased in both groups.The functional limitation(t=2.379,P=0.020),psychosocial(t=2.420,P=0.000),physical pain and discomfort(t=6.581,P=0.000),and total scores(t=2.140,P=0.035)were lower in the intervention group than those in the control group.CONCLUSION Orthodontic treatment combined with 3D printing guide plate implant restoration can significantly improve the masticatory and phonic functions,quality of life,and psychological health of patients with dentition defects.Therefore,it is highly recommended in clinic application.
文摘Functional linguistics has become the most influential linguistic theory in the field of translation study since the last de cade of 20th century.However,for the complexity of the context,it is uncommon and insufficient to explore literary texts.Draw ing a general picture of literary text translation from functional perspectives aims to probe into the functional modes of translation.
基金financially supported by the National Key R&D Program of China (no. 2017YFE0111500)the National Natural Science Foundation of China (nos. 51673123 and 51222305 and 51803141)Sichuan Province Science and Technology Project (no. 2016JQ0049)
文摘3D printing of functional energy storage devices is receiving escalating attention over the years due to the customizable manufacturing flexibility and imparted high areal and gravimetric energy density of three-dimensional structured devices, which contribute to the creation of numerous new opportunities for futuristic electronics. Graphene-based inks are ideal elements for the realization of 3D printed energy storage devices if the attractive intrinsic physiochemical properties of graphene could be preserved. However, it is still a great challenge to prepare uniformly dispersed graphene-based materials with desired rheological properties for 3D printing. Here we report a facile strategy for 3D printing of supercapacitors from a highly concentrated graphene oxide (GO) ink. The GO is properly dispersed and the ink fulfills the stringent rheological specifications for 3D printing. The printed GO electrode is functionalized with enhanced structural stability for proper reduction to graphene. The printed supercapacitors deliver the potential to linearly scale up in areal capacitance without jeopardizing the gravimetric capacitance when increasing printed layers. The results hold great promise for the construction of 3D structured energy storage devices that cater to the challenges from next-generation electronics.
基金The authors acknowledge Arizona State University for the start-up funding support.
文摘Over millions of years of evolution,nature has created organisms with overwhelming performances due to their unique materials and structures,providing us with valuable inspirations for the development of next-generation biomedical devices.As a promising new technology,3D printing enables the fabrication of multiscale,multi-material,and multi-functional threedimensional(3D)biomimetic materials and structures with high precision and great flexibility.The manufacturing challenges of biomedical devices with advanced biomimetic materials and structures for various applications were overcome with the flourishing development of 3D printing technologies.In this paper,the state-of-the-art additive manufacturing of biomimetic materials and structures in the field of biomedical engineering were overviewed.Various kinds of biomedical applications,including implants,lab-on-chip,medicine,microvascular network,and artificial organs and tissues,were respectively discussed.The technical challenges and limitations of biomimetic additive manufacturing in biomedical applications were further investigated,and the potential solutions and intriguing future technological developments of biomimetic 3D printing of biomedical devices were highlighted.
基金supported by the Agriculture and Agri-Food Canada,AAFC’s IOP project,Manitoba Pork and Swine Innovation PorcCanada Foundation for Innovation(CFI)supported by the Chinese Scholarship Council(CSC).
文摘Background:Enterotoxigenic Escherichia coli(ETEC)F4 commonly colonizes the small intestine and releases enterotoxins that impair the intestinal barrier function and trigger inflammatory responses.Although Bacillus licheniformis(B.licheniformis)has been reported to enhance intestinal health,it remains to be seen whether there is a functional role of B.licheniformis in intestinal inflammatory response in intestinal porcine epithelial cell line(IPEC-J2)when stimulated with ETEC F4.Methods:In the present study,the effects of B.licheniformis PF9 on the release of pro-inflammation cytokines,cell integrity and nuclear factor-κB(NF-κB)activation were evaluated in ETEC F4-induced IPEC-J2 cells.Results:B.licheniformis PF9 treatment was capable of remarkably attenuating the expression levels of inflammation cytokines tumor necrosis factor-α(TNF-α),interleukin(IL)-8,and IL-6 during ETEC F4 infection.Furthermore,the gene expression of Toll-like receptor 4(TLR4)-mediated upstream related genes of NF-κB signaling pathway has been significantly inhibited.These changes were accompanied by significantly decreased phosphorylation of p65 NF-κB during ETEC F4 infection with B.licheniformis PF9 treatment.The immunofluorescence and western blotting analysis revealed that B.licheniformis PF9 increased the expression levels of zona occludens 1(ZO-1)and occludin(OCLN)in ETEC F4-infected IPEC-J2 cells.Meanwhile,the B.licheniformis PF9 could alleviate the injury of epithelial barrier function assessed by the trans-epithelial electrical resistance(TEER)and cell permeability assay.Interestingly,B.licheniformis PF9 protect IPEC-J2 cells against ETEC F4 infection by decreasing the gene expressions of virulence-related factors(including luxS,estA,estB,and elt)in ETEC F4.Conclusions:Collectively,our results suggest that B.licheniformis PF9 might reduce inflammation-related cytokines through blocking the NF-κB signaling pathways.Besides,B.licheniformis PF9 displayed a significant role in the enhancement of IPEC-J2 cell integrity.
基金supported by the General Research Fund(17200222,17208919,17204020)of the Research Grants Council of Hong Kongthe National Natural Science Foundation of China/Research Grants Council Joint Research Scheme(N_HKU743/22)the Seed Fund for Basic Research(201910159047,202111159097)of the University Research Committee(URC),The University of Hong Kong。
文摘The continual demand for modern optoelectronics with a high integration degree and customized functions has increased requirements for nanofabrication methods with high resolution,freeform,and mask-free.Meniscus-on-demand three-dimensional(3D)printing is a high-resolution additive manufacturing technique that exploits the ink meniscus formed on a printer nozzle and is suitable for the fabrication of micro/nanoscale 3D architectures.This method can be used for solution-processed 3D patterning of materials at a resolution of up to100 nm,which provides an excellent platform for fundamental scientific studies and various practical applications.This review presents recent advances in meniscus-on-demand 3D printing,together with historical perspectives and theoretical background on meniscus formation and stability.Moreover,this review highlights the capabilities of meniscus-on-demand 3D printing in terms of printable materials and potential areas of application,such as electronics and photonics.
基金financially sponsored by the National Key Research and Development Program of China(2018YFA0703000)the National Natural Science Foundation of China(No.U1909218)+2 种基金the Joint Funds of Guangdong Basic and Applied Basic Research Foundation(2019A1515110261)the Special Projects in Key Fields from the Department of Education of Guangdong Province(2022ZDZX2059)the Dongguan Science and Technology of Social Development Program(20221800905072)。
文摘Because of the complex nerve anatomy and limited regeneration ability of natural tissue,the current treatment effect for long-distance peripheral nerve regeneration and spinal cord injury(SCI)repair is not satisfactory.As an alternative method,tissue engineering is a promising method to regenerate peripheral nerve and spinal cord,and can provide structures and functions similar to natural tissues through scaffold materials and seed cells.Recently,the rapid development of 3D printing technology enables researchers to create novel 3D constructs with sophisticated structures and diverse functions to achieve high bionics of structures and functions.In this review,we first outlined the anatomy of peripheral nerve and spinal cord,as well as the current treatment strategies for the peripheral nerve injury and SCI in clinical.After that,the design considerations of peripheral nerve and spinal cord tissue engineering were discussed,and various 3D printing technologies applicable to neural tissue engineering were elaborated,including inkjet,extrusion-based,stereolithography,projection-based,and emerging printing technologies.Finally,we focused on the application of 3D printing technology in peripheral nerve regeneration and spinal cord repair,as well as the challenges and prospects in this research field.
基金supported by the National Major Scientific and Technological Special Project for Significant New Drugs Development,No.2019ZX09301-147 (to LXZ)。
文摘There are various clinical treatments for traumatic brain injury,including surgery,drug therapy,and rehabilitation therapy;howeve r,the therapeutic effects are limited.Scaffolds combined with exosomes represent a promising but challenging method for improving the repair of traumatic brain injury.In this study,we determined the ability of a novel 3D-printed collagen/chitosan scaffold loaded with exosomes derived from neural stem cells pretreated with insulin-like growth factor-1(3D-CC-INEXOS) to improve traumatic brain injury repair and functional recove ry after traumatic brain injury in rats.Composite scaffolds comprising collagen,chitosan,and exosomes derived from neural stem cells pretreated with insulin-like growth fa ctor-1(INEXOS) continuously released exosomes for 2weeks.Transplantation of 3D-CC-INExos scaffolds significantly improved motor and cognitive functions in a rat traumatic brain injury model,as assessed by the Morris water maze test and modified neurological seve rity scores.In addition,immunofluorescence staining and transmission electron microscopy showed that3D-CC-INExos implantation significantly improved the recove ry of damaged nerve tissue in the injured area.In conclusion,this study suggests that transplanted3D-CC-INExos scaffolds might provide a potential strategy for the treatment of traumatic brain injury and lay a solid foundation for clinical translation.
文摘BACKGROUND Colorectal cancer(CRC)is one of the most common malignancies worldwide.AIM To explore the expression of microRNA miR-19a-3p and Forkhead box F2(FOXF2)in patients with CRC and the relevant mechanisms.METHODS Sixty-two CRC patients admitted to the hospital were enrolled into the study group,and sixty healthy people from the same period were assigned to the control group.Elbow venous blood was sampled from the patients and healthy individuals,and blood serum was saved for later analysis.MiR-19a-3p mimics,miR-19a-3p inhibitor,miR-negative control,small interfering-FOXF2,and short hairpin-FOXF2 were transfected into HT29 and HCT116 cells.Then quantitative polymerase chain reaction was performed to quantify the expression of miR-19a-3p and FOXF2 in HT29 and HCT116 cells,and western blot(WB)analysis was conducted to evaluate the levels of FOXF2,glycogen synthase kinase 3 beta(GSK-3β),phosphorylated GSK-3β(p-GSK-3β),β-catenin,p-β-catenin,α-catenin,Ncadherin,E-cadherin,and vimentin.The MTT,Transwell,and wound healing assays were applied to analyze cell proliferation,invasion,and migration,respectively,and the dual luciferase reporter assay was used to determine the correlation of miR-19a-3p with FOXF2.RESULTS The patients showed high serum levels of miR-19a-3p and low levels of FOXF2,and the area under the curves of miR-19a-3p and FOXF2 were larger than 0.8.MiR-19a-3p and FOXF2 were related to sex,tumor size,age,tumor-nodemetastasis staging,lymph node metastasis,and differentiation of CRC patients.Silencing of miR-19a-3p and overexpression of FOXF2 suppressed the epithelialmesenchymal transition,invasion,migration,and proliferation of cells.WB analysis revealed that silencing of miR-19a-3p and FOXF2 overexpression significantly suppressed the expression of p-GSK-3β,β-catenin,N-cadherin,and vimentin;and increased the levels of GSK-3β,p-β-catenin,α-catenin,and Ecadherin.The dual luciferase reporter assay confirmed that there was a targeted correlation of miR-19a-3p with FOXF2.In addition,a rescue experiment revealed that there were no differences in cell proliferation,invasion,and migration in HT29 and HCT116 cells co-transfected with miR-19a-3p-mimics+sh-FOXF2 and miR-19a-3p-inhibitor+si-FOXF2 compared to the miR-negative control group.CONCLUSION Inhibiting miR-19a-3p expression can upregulate the FOXF2-mediated Wnt/β-catenin signaling pathway,thereby affecting the epithelial-mesenchymal transition,proliferation,invasion,and migration of cells.Thus,miR-19a-3p is likely to be a therapeutic target in CRC.
文摘A new maximal function is introduced in the dual spaces of test function spaces on spaces of homogeneous type. Using this maximal function, we get new characterization of atomic H^p spaces.
基金Project supported by the Research Starting Foundation of Hohai University (Grant No. 2084/40801130)the Natural Science Foundation of Hohai University (Grant Nos. 2008431211 and 2008430311)+2 种基金the Excellent Innovation Personal Support Plan of Hohai Universitythe Basic Scientific Research Foundation of National Centralthe Special Foundation of the Natural Natural Science (Grant No. 10947132)
文摘This paper uses the generalised gradient approximation based on density functional theory to analyse the geometric structure and properties of the 3d transition metal atom doped endohedral fullerene M@C20F20 (M = Sc-Ni). The geometric optimization shows that the cage centre is the most stable position for M, forming the structure named as M@C20F20-4. The inclusion energy, zero-point energy, and energy gap calculations tell us that Ni@C20F20-4 should be thermodynamically and kinetically stablest. M@C20F20-4 (M = Sc-Co) possesses high magnetic moments varied from 1 to 6 μB, while Ni@C20F20-4 is nonmagnetic. The Ni-C bond in Ni@C20F20-4 contains both the covalent and ionic characters.
基金supported by the National Natural Science Foundation of China(21773016,21971244,51932001)the National Key R&D Program of China(2018YFA0703504)。
文摘Chemical doping is verified to be a promising strategy to regulate local electron distribution and further promote the poor intrinsic catalytic activity of graphdiyne.However,the current doping approach still faces problems such as precise doping for creating active sites and the destruction of graphdiyne skeleton calling for high temperature.Here,we achieved charge redistribution on graphdiyne surface through molecule functionalization.A p-type molecule–F4 TCNQ(2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodime thane)was introduced and the site-defined functionalization was accomplished.Theoretical calculations showed that the charge transfer ability is improved and graphdiyne becomes positively charged.The oxygen reduction electrocatalysis was conducted as a proof of principle,where the electronic states of sp hybridized C active site was tuned toward favorable reaction intermediates’adsorption.Such work from both theoretical prediction and experimental validation,found that molecule functionalization is effective to promote the electrocatalytic oxygen reduction,which creates new possibilities for graphdiyne’s applications in different electrochemical reactions.
文摘For Riemannian manifolds with a measure, we study the gradient estimates for positive smooth f-harmonic functions when the ∞-Bakry-Emery Ricci tensor and Ricci tensor are bounded from below, generalizing the classical ones of Yau (i.e., when : is constant).