Thermal print head heating real-time temperature fluctuations are too large,often causing damage to the print head heating point,resulting in poor print quality and unsatisfactory print results.Therefore,to improve th...Thermal print head heating real-time temperature fluctuations are too large,often causing damage to the print head heating point,resulting in poor print quality and unsatisfactory print results.Therefore,to improve the stability of the thermal print head during printing,and at the same time to solve the inefficiency of the traditional single-chip microcomputer control of the thermal print head heating method,a field programmable gate array-based thermal print head heating control method is proposed.To control the core,the intelligent fuzzy Proportional-Integral-Differential(PID)control algorithm is used to ensure that the temperature of the print head can be stabilized quickly.Through simulation and experimental verification,it is shown that the intelligent fuzzy PID control algorithm greatly improves the temperature stabilization effect,and the time required to reach stability short not only improve the printing accuracy but also extend the life of the print head.展开更多
There are various applied electro-optical devices, which utilize light emitting didoe(LED) chip array for applications to displays and opto-electronic sensors. In those devices, it is the one of the critical technical...There are various applied electro-optical devices, which utilize light emitting didoe(LED) chip array for applications to displays and opto-electronic sensors. In those devices, it is the one of the critical technical issues to minimize uncertain fluctuations including optical power and optical density. Due to variation in operating environment of a device, those are not corrected precisely by controlling parameters based on simple relation between parameters and resultant abovementioned outputs.Therefore, there is essential need to correct outputs in real-time based on correction function generated from the consideration on various operation condition. In this article, we introduce an output correction method through reporting real-time image noise reduction in the application to electro-photography with LED print head. In the technology of LED print head, as differences in optical characteristics between each LED cause vertical image noise, it should be corrected in order to obtain images that are comparable or better in quality compared to those produced by the conventional laser scanning method. Even though it seems that the method used to obtain uniform light power from each LED can solve this problem, it does not work well for high-resolution printing. Therefore, a scan method involving correction by a printed and scanned pattern is introduced through this work. The scan method is composed of correction patterns to minimize printing noise by its shape, the correction algorithm to calculate the optimized value and the printing algorithm to control gray levels in real-time precisely. We believe that the developed correction method upgrades the printing quality of the LPH printer better than commercial printers. The developed correction method can also be applied to various application areas that use an array-type light source such as display systems and lighting systems.展开更多
Immobilization devices may be a valuable aid to ensure the improved effectiveness of radiotherapy treatments where constraining the movements of specific anatomical segments is crucial. This need is also present in ot...Immobilization devices may be a valuable aid to ensure the improved effectiveness of radiotherapy treatments where constraining the movements of specific anatomical segments is crucial. This need is also present in other situations, specifically when the superposition of various medical images is required for fine identification and characterization of some pathologies. Because of their structural characteristics, existing head immobilization systems may be claustrophobic and very uncomfortable for patients, during both the modeling and usage stages. Because of this, it is important to minimize all the discomforts related to the mask to alleviate patients’ distress and to simultaneously guarantee and maximize the restraint effectiveness of the mask. In the present work, various head immobilization mask models are proposed based on geometrical information extracted from computerized tomography images and from 3D laser scanning point clouds. These models also consider the corresponding connection to a radiotherapy table, as this connection is easily altered to accommodate various manufacturers’ solutions. A set of materials used in the radiotherapy field is considered to allow the assessment of the stiffness and strength of the masks when submitted to typical loadings.展开更多
综述了喷墨印花机用压电式喷头、热气泡式喷头和连续喷墨喷头的工作原理和发展现状。结合2014中国国际纺织机械展览会暨ITMA亚洲展览会调研情况,阐述了喷墨印花机在提高印花速度和分辨率两方面的发展现状和趋势,介绍分析了MS公司LaRio...综述了喷墨印花机用压电式喷头、热气泡式喷头和连续喷墨喷头的工作原理和发展现状。结合2014中国国际纺织机械展览会暨ITMA亚洲展览会调研情况,阐述了喷墨印花机在提高印花速度和分辨率两方面的发展现状和趋势,介绍分析了MS公司LaRio喷墨印花机、Konica Minolta公司的Naseenger PRO 1000喷墨印花机、Zimmer公司Colaris喷墨印花机和杭州宏华数码科技股份公司VEGA7000k喷墨印花机。展开更多
文摘Thermal print head heating real-time temperature fluctuations are too large,often causing damage to the print head heating point,resulting in poor print quality and unsatisfactory print results.Therefore,to improve the stability of the thermal print head during printing,and at the same time to solve the inefficiency of the traditional single-chip microcomputer control of the thermal print head heating method,a field programmable gate array-based thermal print head heating control method is proposed.To control the core,the intelligent fuzzy Proportional-Integral-Differential(PID)control algorithm is used to ensure that the temperature of the print head can be stabilized quickly.Through simulation and experimental verification,it is shown that the intelligent fuzzy PID control algorithm greatly improves the temperature stabilization effect,and the time required to reach stability short not only improve the printing accuracy but also extend the life of the print head.
基金supported by the National Research Foundation of Korea Grant funded by the Korean Government(Grant No.2015R1C1A1A01053888)the Yeungnam University Research Grant(Grant No.216A580022)
文摘There are various applied electro-optical devices, which utilize light emitting didoe(LED) chip array for applications to displays and opto-electronic sensors. In those devices, it is the one of the critical technical issues to minimize uncertain fluctuations including optical power and optical density. Due to variation in operating environment of a device, those are not corrected precisely by controlling parameters based on simple relation between parameters and resultant abovementioned outputs.Therefore, there is essential need to correct outputs in real-time based on correction function generated from the consideration on various operation condition. In this article, we introduce an output correction method through reporting real-time image noise reduction in the application to electro-photography with LED print head. In the technology of LED print head, as differences in optical characteristics between each LED cause vertical image noise, it should be corrected in order to obtain images that are comparable or better in quality compared to those produced by the conventional laser scanning method. Even though it seems that the method used to obtain uniform light power from each LED can solve this problem, it does not work well for high-resolution printing. Therefore, a scan method involving correction by a printed and scanned pattern is introduced through this work. The scan method is composed of correction patterns to minimize printing noise by its shape, the correction algorithm to calculate the optimized value and the printing algorithm to control gray levels in real-time precisely. We believe that the developed correction method upgrades the printing quality of the LPH printer better than commercial printers. The developed correction method can also be applied to various application areas that use an array-type light source such as display systems and lighting systems.
基金supported by the Project IPL/2016/Soft Imob/ISEL and Project LAETA—UID/EMS/50022/2019
文摘Immobilization devices may be a valuable aid to ensure the improved effectiveness of radiotherapy treatments where constraining the movements of specific anatomical segments is crucial. This need is also present in other situations, specifically when the superposition of various medical images is required for fine identification and characterization of some pathologies. Because of their structural characteristics, existing head immobilization systems may be claustrophobic and very uncomfortable for patients, during both the modeling and usage stages. Because of this, it is important to minimize all the discomforts related to the mask to alleviate patients’ distress and to simultaneously guarantee and maximize the restraint effectiveness of the mask. In the present work, various head immobilization mask models are proposed based on geometrical information extracted from computerized tomography images and from 3D laser scanning point clouds. These models also consider the corresponding connection to a radiotherapy table, as this connection is easily altered to accommodate various manufacturers’ solutions. A set of materials used in the radiotherapy field is considered to allow the assessment of the stiffness and strength of the masks when submitted to typical loadings.
文摘综述了喷墨印花机用压电式喷头、热气泡式喷头和连续喷墨喷头的工作原理和发展现状。结合2014中国国际纺织机械展览会暨ITMA亚洲展览会调研情况,阐述了喷墨印花机在提高印花速度和分辨率两方面的发展现状和趋势,介绍分析了MS公司LaRio喷墨印花机、Konica Minolta公司的Naseenger PRO 1000喷墨印花机、Zimmer公司Colaris喷墨印花机和杭州宏华数码科技股份公司VEGA7000k喷墨印花机。
