Problem-solving model guided by stimulus-organism-response theory:State of mind and coping styles of depressed mothers after cesarean delivery

BACKGROUND The use of a problem-solving model guided by stimulus-organism-response(SOR)theory for women with postpartum depression after cesarean delivery may inform nursing interventions for women with postpartum depression.AIM To explore the state of mind and coping style of women with depression after cesarean delivery guided by SOR theory.METHODS Eighty postpartum depressed women with cesarean delivery admitted to the hospital between January 2022 and October 2023 were selected and divided into two groups of 40 cases each,according to the random number table method.In the control group,the observation group adopted the problem-solving nursing model under SOR theory.The two groups were consecutively intervened for 12 weeks,and the state of mind,coping styles,and degree of post-partum depression were analyzed at the end of the intervention.RESULTS The Edinburgh Postnatal Depression Scale and Hamilton Depression Scale-24-item scores of the observation group were lower than in the control group after care,and the level of improvement in the state of mind was higher than that of the control group(P<0.05).The level of coping with illness in the observation group after care(26.48±3.35)was higher than that in the control group(21.73±3.20),and the level of avoidance(12.04±2.68)and submission(8.14±1.15)was lower than that in the control group(15.75±2.69 and 9.95±1.20),with significant differences(P<0.05).CONCLUSION Adopting the problem-solving nursing model using SOR theory for postpartum depressed mothers after cesarean delivery reduced maternal depression,improved their state of mind,and coping level with illness.

A model of community capacity building for sustainable dengue problem solution in Southern Thailand

Dengue community capacity (DCC) is important for developing a sustainable approach to over-coming the problem of dengue. The objectives were 1) to develop and 2) evaluate a dengue community capacity building model for the leader and non-leader group in three communities selected by purposive technique. A mixed method research design was used employing both qualitative and quantitative methods with qualitative studies conducted for community capacity building model: assessment, planning, implementation, and evaluation. DCC level was assessed by the Dengue Community Capacity Assessment Tool (DCCAT) including larval indices, and morbidity and mortality rate. To analyze the differences of the leader and non-leader’s DCC levels both pre and post-interventions in each model, the Mann-Whitney and Independent T-test were used and to analyze the difference of the DCC level among the three models (Ban Mon, Ban Nangpraya and Ban Kang), the Kruskal-Wallis Test, ANOVA, and ANCOVA were used. The findings showed that there were some differences among the three models in dengue community capacity building in terms model. The participants consisted of leader (n = 26, 24 and 28) and non-leader groups (n = 200, 215 and 176 respectively). The DCC levels of both leader and non-leader groups increased post-intervention in each model (p < 0.001) and in all three models, showing a statistically significant difference between pre and post-intervention (p < 0.001). Ban Kang model demonstrated the highest DCC levels of leader and non-leader groups, the lowest larval indices (HI, BI, and CI), and no dengue morbidity. In contrast, Ban Mon and Ban Nangpraya model showed low DCC level in both leader and non-leader groups, a high rate of larval indices and high dengue morbidity rate. However, there was no mortality rate in three areas. The conclusion indicates that the model with a high DCC level showed low risk on the dengue index both entomological and epidemiology index. The model of dengue community capacity building for dengue solution was sustainability not only needs to be maintained DCC levels but also increased dependent upon the contexts of each community.

An Online Model Correction Method Based on an Inverse Problem:Part I—Model Error Estimation by Iteration

Errors inevitably exist in numerical weather prediction （NWP） due to imperfect numeric and physical parameterizations. To eliminate these errors, by considering NWP as an inverse problem, an unknown term in the prediction equations can be estimated inversely by using the past data, which are presumed to represent the imperfection of the NWP model （model error, denoted as ME）. In this first paper of a two-part series, an iteration method for obtaining the MEs in past intervals is presented, and the results from testing its convergence in idealized experiments are reported. Moreover, two batches of iteration tests were applied in the global forecast system of the Global and Regional Assimilation and Prediction System （GRAPES-GFS） for July-August 2009 and January-February 2010. The datasets associated with the initial conditions and sea surface temperature （SST） were both based on NCEP （National Centers for Environmental Prediction） FNL （final） data. The results showed that 6th h forecast errors were reduced to 10% of their original value after a 20-step iteration. Then, off-line forecast error corrections were estimated linearly based on the 2-month mean MEs and compared with forecast errors. The estimated error corrections agreed well with the forecast errors, but the linear growth rate of the estimation was steeper than the forecast error. The advantage of this iteration method is that the MEs can provide the foundation for online correction. A larger proportion of the forecast errors can be expected to be canceled out by properly introducing the model error correction into GRAPES-GFS.

ON THE CLOSURE PROBLEM OF TURBULENCE MODEL THEORY

It is a wrong viewpoint that the turbulence closure problem is due to thenon-linearity, of N-S equation, because if we omit the non-linear terms in N-Sequation,many, physical quantities can not be obtained other than the mean-values. Inthis paper, we proof that the closure problem of turbulence be induced by lack ofstatistical disiribution in present turbulence theory. And the restriction of turbulencemodel theory and shortcoming of direct numerical simulation of N-S to solve theturbulence have been pointed out.

Neutrality Criteria for Stability Analysis of Dynamical Systems through Lorentz and Rossler Model Problems

Two methods of stability analysis of systems described by dynamical equations are being considered. They are based on an analysis of eigenvalues spectrum for the evolutionary matrix or the spectral equation and they allow determining the conditions of stability and instability, as well as the possibility of chaotic behavior of systems in case of a stability loss. The methods are illustrated for nonlinear Lorenz and Rossler model problems.

INVERSE PROBLEM STABILITY OF A CONTINUOUS-IN-TIME FINANCIAL MODEL

In this work, we study the inverse problem stability of the continuous-in-time model which is designed to be used for the finances of public institutions. We discuss this study with determining the Loan measure from algebraic spending measure in Radon measure space M([tI,Θmax]), and in Hilbert space L2([tI,Θmax]) when they are density measures. For this inverse problem we prove the uniqueness theorem, obtain a procedure for constructing the solution and provide necessary and sufficient conditions for the solvability of the inverse problem in L2([tI,Θmax]).

An Online Model Correction Method Based on an Inverse Problem:PartⅡ——Systematic Model Error Correction

An online systematic error correction is presented and examined as a technique to improve the accuracy of real-time numerical weather prediction, based on the dataset of model errors （MEs） in past intervals. Given the analyses, the ME in each interval （6 h） between two analyses can be iteratively obtained by introducing an unknown tendency term into the prediction equation, shown in Part I of this two-paper series. In this part, after analyzing the 5-year （2001-2005） GRAPES- GFS （Global Forecast System of the Global and Regional Assimilation and Prediction System） error patterns and evolution, a systematic model error correction is given based on the least-squares approach by firstly using the past MEs. To test the correction, we applied the approach in GRAPES-GFS for July 2009 and January 2010. The datasets associated with the initial condition and SST used in this study were based on NCEP （National Centers for Environmental Prediction） FNL （final） data. The results indicated that the Northern Hemispheric systematically underestimated equator-to-pole geopotential gradient and westerly wind of GRAPES-GFS were largely enhanced, and the biases of temperature and wind in the tropics were strongly reduced. Therefore, the correction results in a more skillful forecast with lower mean bias and root-mean-square error and higher anomaly correlation coefficient.

Social Problems Caused by the Model

While achieving successes,the neoliberalist economic development model hasalso given rise to a series of grave problems,especially problem of social injusticeand polarization,which have begun to threaten Latin America’s social security andstability.

Problems of Quality of Migrant Workers and Countermeasures from the Perspective of Iceberg Model

From the perspective of Iceberg Model,we analyze levels and structures of quality of migrant workers from knowledge,skills,social role, self-cognition,traits and motives. On the basis of these situations,we put forward countermeasures: value rural education and enhance skill training; make clear occupational planning and set up correct sense of value; assist migrant workers in facing the reality and adjusting their state of mind in working; coordinate interest relationship and call upon social care; rebuild mental world and construct harmonious society.

An approach to estimating and extrapolating model error based on inverse problem methods:towards accurate numerical weather prediction

Model error is one of the key factors restricting the accuracy of numerical weather prediction （NWP）. Considering the continuous evolution of the atmosphere, the observed data （ignoring the measurement error） can be viewed as a series of solutions of an accurate model governing the actual atmosphere. Model error is represented as an unknown term in the accurate model, thus NWP can be considered as an inverse problem to uncover the unknown error term. The inverse problem models can absorb long periods of observed data to generate model error correction procedures. They thus resolve the deficiency and faultiness of the NWP schemes employing only the initial-time data. In this study we construct two inverse problem models to estimate and extrapolate the time-varying and spatial-varying model errors in both the historical and forecast periods by using recent observations and analogue phenomena of the atmosphere. Numerical experiment on Burgers＇ equation has illustrated the substantial forecast improvement using inverse problem algorithms. The proposed inverse problem methods of suppressing NWP errors will be useful in future high accuracy applications of NWP.

An Efficient Three-Dimensional Coupled Normal Mode Model and Its Application to Internal Solitary Wave Problems

We present an efficient three-dimensional coupled-mode model based on the Fourier synthesis technique. In principle, this model is a one-way model, and hence provides satisfactory accuracy for problems where the forward scattering dominates. At the same time, this model provides an efficiency gain of an order of magnitude or more over two-way coupled-mode models. This model can be applied to three-dimensional range-dependent problems with a slowly varying bathymetry or internal waves. A numerical example of the latter is demonstrated in this work. Comparisons of both accuracy and efficiency between the present model and a benchmark model are also provided.

A New Fractional Model for the Falling Body Problem

Recently, a conformable fractional derivative has been proposed to calculate the derivative of non-integer order of time functions. It has been shown that this new fractional derivative definition obeys many advantages over the preceding definitions. For mathematical models in applied sciences and to preserve the dimensionality of the physical quantities, an auxiliary parameter （~r） which has the dimension of seconds should be implemented in the fractional derivative definition. We obtain analytic solutions for the resulting conformable fractional differential equations describing the vertical velocity and the height of the falling body. It is shown that the dimensions of velocity and height are always correct without any restrictions on the auxiliary parameter cr which contradicts with the results in the literature when applying the Caputo definition to the same problem. This may open the door for many future works either to describe the role of such an auxiliary parameter or to derive a more suitable definition for the fractional derivative.

Mathematical Model and Algorithm for the Task Allocation Problem of Robots in the Smart Warehouse

In the smart warehousing system adopting cargo-to-person mode, all the items are stored in the movable shelves. There are some warehouse robots transporting the shelves to the working platforms for completing order picking or items replenishment tasks. When the number of robots is insufficient, the task allocation problem of robots is an important issue in designing the warehousing system. In this paper, the task allocation problem of insufficient warehouse robots (TAPIR) is investigated. Firstly, the TAPIR problem is decomposed into three sub-problems: task grouping problem, task scheduling problem and task balanced allocation problem. Then three sub-problems are respectively formulated into integer programming models, and the corresponding heuristic algorithms for solving three sub-problems are designed. Finally, the simulation and analysis are done on the real data of online bookstore. Simulation results show that the mathematical models and algorithms of this paper can provide a theoretical basis for solving the TAPIR problem.

Mathematical Modelling for a Multi-Product Inventory Routing Problem with Split Delivery

In this article, a multi-product inventory routing problem is studied. One-depot and many retailers in a finite time period are considered, and split delivery is allowed as well for the addressed problem. The objective is to minimize the overall cost including vehicle cost, inventory holding cost and transportation cost while the delivery schedule and the quantity of each product for each retailer have to be decided simultaneously. A mathematical model is presented for solving the addressed optimally and example is illustrated as well.

Closed Form Moment Formulae for the Lognormal SABR Model and Applications to Calibration Problems

We study two calibration problems for the lognormal SABR model using the moment method and some new formulae for the moments of the logarithm of the forward prices/rates variable. The lognormal SABR model is a special case of the SABR model [1]. The acronym “SABR” means “Stochastic-αβρ” and comes from the original names of the model parameters (i.e., α,β,ρ) [1]. The SABR model is a system of two stochastic differential equations widely used in mathematical finance whose independent variable is time and whose dependent variables are the forward prices/rates and the associated stochastic volatility. The lognormal SABR model corresponds to the choice β = 1 and depends on three quantities: the parameters??α,ρ and the initial stochastic volatility. In fact the initial stochastic volatility cannot be observed and can be regarded as a parameter. A calibration problem is an inverse problem that consists in determineing the values of these three parameters starting from a set of data. We consider two different sets of data, that is: i) the set of the forward prices/rates observed at a given time on multiple independent trajectories of the lognormal SABR model, ii) the set of the forward prices/rates observed on a discrete set of known time values along a single trajectory of the lognormal SABR model. The calibration problems corresponding to these two sets of data are formulated as constrained nonlinear least-squares problems and are solved numerically. The formulation of these nonlinear least-squares problems is based on some new formulae for the moments of the logarithm of the forward prices/rates. Note that in the financial markets the first set of data considered is hardly available while the second set of data is of common use and corresponds simply to the time series of the observed forward prices/rates. As a consequence the first calibration problem although realistic in several contexts of science and engineering is of limited interest in finance while the second calibration problem is of practical use in finance (and elsewhere). The formulation of these calibration problems and the methods used to solve them are tested on synthetic and on real data. The real data studied are the data belonging to a time series of exchange rates between currencies (euro/U.S. dollar exchange rates).

A Mathematical Model to Solve Bio-Heat Transfer Problems through a Bio-Heat Transfer Equation with Quadratic Temperature-Dependent Blood Perfusion under a Constant Spatial Heating on Skin Surface

We consider the one-dimensional bio-heat transfer equation with quadratic temperature-dependent blood perfusion, which governs the temperature distribution inside biological tissues. Using an extended mapping method with symbolic computation, we obtain the exact analytical thermal traveling wave solution, which describes the non-uniform temperature distribution inside the bodies. The found exact solution is used to investigate the temperature distribution in the tissues. It is found that the surrounding medium with higher temperature does not necessarily imply that the tissue will quickly (after a short duration of heating process) reach the desired temperature. It is also found that increased perfusion causes a decline in local temperature.

Modeling of Diffusion Transport through Oral Biofilms with the Inverse Problem Method

Aim The purpose of this study was to develop a mathe-matical model to quantitatively describe the passive trans-port of macromolecules within dental biofilms. Methodology Fluorescently labeled dextrans with different molecular mass （3 kD,10 kD,40 kD,70 kD,2 000 kD） were used as a series of diffusion probes. Streptococcus mutans,Streptococcus sanguinis,Actinomyces naeslundii and Fusobacterium nucleatum were used as inocula for biofilm formation. The diffusion processes of different probes through the in vitro biofilm were recorded with a confocal laser microscope. Results Mathematical function of biofilm penetration was constructed on the basis of the inverse problem method. Based on this function,not only the relationship between average concentration of steady-state and molecule weights can be analyzed,but also that between penetrative time and molecule weights. Conclusion This can be used to predict the effective concentration and the penetrative time of anti-biofilm medicines that can diffuse through oral biofilm. Further-more,an improved model for large molecule is proposed by considering the exchange time at the upper boundary of the dental biofilm.

Riemann problem for a simplest scalar nonconvex ZND combustion model with viscosity

In this paper, a simplest scalar nonconvex ZND combustion model with viscosity is considered. The existence of the global solution of the Riemann problem for the combustion model is obtained by using the fixed point theorem.

Predictive Mathematical and Statistical Modeling of the Dynamic Poverty Problem in Burundi: Case of an Innovative Economic Optimization System

The mathematical and statistical modeling of the problem of poverty is a major challenge given Burundi’s economic development. Innovative economic optimization systems are widely needed to face the problem of the dynamic of the poverty in Burundi. The Burundian economy shows an inflation rate of -1.5% in 2018 for the Gross Domestic Product growth real rate of 2.8% in 2016. In this research, the aim is to find a model that contributes to solving the problem of poverty in Burundi. The results of this research fill the knowledge gap in the modeling and optimization of the Burundian economic system. The aim of this model is to solve an optimization problem combining the variables of production, consumption, budget, human resources and available raw materials. Scientific modeling and optimal solving of the poverty problem show the tools for measuring poverty rate and determining various countries’ poverty levels when considering advanced knowledge. In addition, investigating the aspects of poverty will properly orient development aid to developing countries and thus, achieve their objectives of growth and the fight against poverty. This paper provides a new and innovative framework for global scientific research regarding the multiple facets of this problem. An estimate of the poverty rate allows good progress with the theory and optimization methods in measuring the poverty rate and achieving sustainable development goals. By comparing the annual food production and the required annual consumption, there is an imbalance between different types of food. Proteins, minerals and vitamins produced in Burundi are sufficient when considering their consumption as required by the entire Burundian population. This positive contribution for the latter comes from the fact that some cows, goats, fishes, ···, slaughtered in Burundi come from neighboring countries. Real production remains in deficit. The lipids, acids, calcium, fibers and carbohydrates produced in Burundi are insufficient for consumption. This negative contribution proves a Burundian food deficit. It is a decision-making indicator for the design and updating of agricultural policy and implementation programs as well as projects. Investment and economic growth are only possible when food security is mastered. The capital allocated to food investment must be revised upwards. Demographic control is also a relevant indicator to push forward Burundi among the emerging countries in 2040. Meanwhile, better understanding of the determinants of poverty by taking cultural and organizational aspects into account guides managers for poverty reduction projects and programs.

医学影像学教学模式的现状与实践

医学影像学是临床医学中一门实践性极强辅助学科,同时也是发展迅猛,日新月异的学科,在现代医疗中扮演着越来越重要的角色。文章通过对影像医学教学的基本要求、教学目标和目的进行说明,采用影像存储和传输系统(picture archiving and communication system,PACS)结合以问题为基础的教学法(problem-based learning,PBL)及以案例为基础的教学法(case-based learning,CBL)教学法进行实践。针对非影像专业学员学习时间短、学习任务重,学员影像基础和需求迥异,部分非影像专业学员自身对医学影像学的重视不足以及放射基地重视不足等问题。文章阐述了PACS与PBL、CBL教学法、钉钉、微信及SPARK学习平台等学习沟通平台相结合,并增加专职人员对基地管理、带教老师一对一指导,以及不断加强科室建设、安排名师上课来提高科室影响力等多种混合教学模式的解决对策,来唤起学员学习影像相关知识的内驱力,达到提高学员轮转学习效果的目的。