Manufacturing Process Selection of “Green” Oil Palm Natural Fiber Reinforced Polyurethane Composites Using Hybrid TEA Criteria Requirement and AHP Method for Automotive Crash Box

In this study,the best manufacturing process will be selected to build an automotive crash box using green oil palm natural fibre-reinforced polyurethane composite materials.This paper introduces an approach consist of technical aspects(T),the economic point of view(E)and availability(A),and it’s also called as TEA requirement.This approach was developed with the goal of assisting the design engineer in the selection of the best manufacturing process during the design phase at the criteria selection stage.In this study,the TEA requirement will integrate with the analytical hierarchy process(AHP)to assist decision makers or manufacturing engineers in determining the most appropriate manufacturing process to be employed in the manufacture of a composite automotive crash box(ACB)at the early stage of the product development process.It is obvious that a major challenge in the manufacturing selection process is lack of information regarding manufacturing of ACB using natural fibre composite(NFC).There have been no previous studies that examined ranking manufacturability processes in terms of their suitability.Therefore,the TEA-AHP hybrid method was introduced to provide unprejudiced criteria-ranking selection prior to evaluation of pairwise comparisons.At the end of this study,the pulforming process was selected as the best manufacturing process for fabrication of the ACB structural component.

Recent developments in selective laser processes for wearable devices

Recently,the increasing interest in wearable technology for personal healthcare and smart virtual/augmented reality applications has led to the development of facile fabrication methods.Lasers have long been used to develop original solutions to such challenging technological problems due to their remote,sterile,rapid,and site-selective processing of materials.In this review,recent developments in relevant laser processes are summarized under two separate categories.First,transformative approaches,such as for laser-induced graphene,are introduced.In addition to design optimization and the alteration of a native substrate,the latest advances under a transformative approach now enable more complex material compositions and multilayer device configurations through the simultaneous transformation of heterogeneous precursors,or the sequential addition of functional layers coupled with other electronic elements.In addition,the more conventional laser techniques,such as ablation,sintering,and synthesis,can still be used to enhance the functionality of an entire system through the expansion of applicable materials and the adoption of new mechanisms.Later,various wearable device components developed through the corresponding laser processes are discussed,with an emphasis on chemical/physical sensors and energy devices.In addition,special attention is given to applications that use multiple laser sources or processes,which lay the foundation for the all-laser fabrication of wearable devices.

3D printing process selection model based on triangular intuitionistic fuzzy numbers in cloud manufacturing

The distributed and customized 3D printing can be realized by 3D printing services in a cloud manufacturing environment.As a growing number of 3D printers are becoming accessible on various 3D printing service platforms,there raises the concern over the validation of virtual product designs and their manufacturing procedures for novices as well as users with 3D printing experience before physical products are produced through the cloud platform.This paper presents a 3D model to help users validate their designs and requirements not only in the traditional digital 3D model properties like shape and size,but also in physical material properties and manufacturing properties when producing physical products like surface roughness,print accuracy and part cost.These properties are closely related to the process of 3D printing and materials.In order to establish the 3D model,the paper analyzes the model of the 3D printing process selection in the cloud platform.Triangular intuitionistic fuzzy numbers are applied to generate a set of 3D printers with the same process and material.Based on the 3D printing process selection model,users can establish the 3D model and validate their designs and requirements on physical material properties and manufacturing properties before printing physical products.

Application of analytical hierarchy process to selection of primary crusher

Selection of crusher required a great deal of design based on the mining plan and operation input. Selection of the best primary crusher from all of available primary crushers is a Multi-Criterion Decision Making （MCDM） problem, in this paper, the Analytical Hierarchy Process （AHP） method was used to selection of the best primary crusher for Golegohar Iron Mine in Iran. For this reason, gyratory, double toggle jaw, single toggle jaw, high speed roll crusher, low speed sizer, impactor, hammer mill and feeder breaker crushers were considered as alternatives and capacity, feed size, product size, rock compressive strength, abrasion index and mobility of crusher were considered as criteria. As a result of our study, the gyvratory crusher was offered as the best primary crusher for the studied mine.

A Selection Process as a Game

The aim of this paper is to exemplify how to solve the problem of selecting a candidate up to his/her acceptance trough game theory.The originality this paper proposes is how this problem will be approached:It will be treated as a single game which is made up of two parts,going as far as to state that the payoffs in the first part of the game will be the mediators of the second part of the game.

PRINCIPLES OF EFFECTIVE SELECTION AND THEIR APPLICATION WANG Bo

Successful selection principles and their application in China are discussed. In addition, the selection process of two Chinese Joint Ventures is reviewed. The paper emphasizes the importance of conducting structured job relevant, behaviour or situation based interviews, with pre determined guideline answers and examples provided. The research showing the increased predictive validity of using this type of interview format is presented. The types of outcomes sought by Canadian employers and the attributes employees or agents should possess are provided. It is argued that these should serve as the basis for creating the interview format. The use of testing and reference checks is also discussed.

Green fuel from coal via Fischer-Tropsch process： scenario of optimal condition of process and modelling

Extracting, transportation and the using from fossil fuels can damage to the hydrosphere, the biosphere and the Earth＇s atmosphere. But humans always need to this valuable substance. The production of oil derivatives by means of forest waste and coal through the Fischer-Tropsch process is an appropriate solution for the cleanliness of all parts of the environment. For the production of favorite products by the synthesis of Fischer-Tropsch, the performance of the catalyst under different operating conditions should be predictable. For this reason, in this paper, eight mathematical models were determined for the selectivity of five products of methane, light hydrocarbons, gasoline, diesel and wax based on three factors of reduction temperature, time on stream, and He/CO ratio inlet gas on iron-based catalyst. The results showed that the reduction temperature factor had the most effective on the selectivity of hydrocarbon products, exception diesel, so that the increase of the reduction temperature led to increase of the selectivity of methane, light hydrocarbons, gasoline and reduce of the degree of selectivity of the wax and vice versa. For the diesel selectivity, factor of the He/CO ratio inlet gas was the most effective than other factors.

Considerations on FGD in Coal-Fired Power Plants

Aiming at issues on flue gas des-ulfurization facing coal-fired power plants inChina, such as process selection, whetheradopting flue gas desulfurization (FGD) or not,qualification of flue gas desulfurization en-gineering company, the localization of technicalequipment, charge for SO2 emission andnormalized management, this article makes acomprehensive analysis and puts forwardconstructive suggestions. These will providesome references for those being engaged in fluegas desulfurization in coal-fired power plants.[

Comparative Analysis between Triple Cross and Double Cross among Three Parents of Crop

In this paper, the triple cross and double cross were compared by analysing the characteristics of genetic variation in progeny of triple cross hybrid and double cross hybrid among three parents, based on the successful breeding practices of Beijing No.10. The results showed that the selection duration of double cross was one year shorter than that of triple cross. The F1 generations of single cross hybrids of double cross showed higher breeding value, and the multiple cross-ing timing of triple cross was more flexible. More wheat varieties have been bred by triple cross, instead of double cross. Moreover, the double cross has a disad-vantage of heavy workload.

Fuzzy Assessment Method and Its Application to Selecting Project Managers

Open competition is a new form of the assessment of candidates and selection of project managers. This has many merits compared to the traditional administrative method of appointment. This article introduces a method of fuzzy assessment of project manager candidates. Fuzzy assessment unifies objective qualitative and quantitative appraisal and can be used for improving decision-making in the selection process.

Control of reactive dividing wall column for selective hydrogenation and separation of C3 stream

In our previous work, the reactive dividing wall column(RDWC) was proposed and proved to be effective for selective hydrogenation and separation of C3 stream. In the present paper, the dynamics and control of the proposed RDWC are investigated. Four control structures including composition and temperature controls are proposed. The feed forward controllers are employed in the four control strategies to shorten the dynamic response time, reduce the maximum deviations and offer an immediate adjustment. The control structures are compared by applying them into the RDWC system with 20% disturbances in both the feed flow rate and the feed compositions, and the results are discussed.

Is it Possible to Increase the Share of Military Women in the Norwegian Armed Forces？

Ever since Norway introduced general conscription for men in 1897, the participation of women in the Norwegian Armed Forces （NorAF） has been an issue for discussion. In 1984 the NorAF introduced occupational equality for men and women. This means that women have the same possibilities and rights as men in the whole organization. However, the share of women in the NorAF （9%） has not increased over the years, and the goal of 20% seems to be hard to reach. Based on data from the project ＂Research on age cohorts for the NorAF＂, this paper presents the concept, theory and empirically based hypotheses behind nine initiatives that I believe will contribute to a substantial increase in the number of women in the NorAF. The initiatives are a combination of short-term, long-term, preventive and drastic measures. The author argues that the suggested measures will affect future recruitment, retention, military （masculine） culture and the selection process of military personnel to the NorAF.

Quality of correlation in quantum information

A strong and stable correlation in quantum information is of high quality for quantum information processing.We define two quantities,selective average correlation and ripple coefficient,to evaluate the quality of correlation in quantum information in a time interval.As a new communication channel,Heisenberg spin chains are widely investigated.We select a two-qubit Heisenberg XXZs pin chain with Dzyaloshinskii-Moriya interaction in an inhomogeneous magnetic field as an example,and use the two quantities to evaluate the qualities of the correlation in quantum information with different measures.The result shows that,if the time evolutions are similar,there needs only evaluating one of them to know when the correlation has high quality for quantum information processing.

Manufacture of Catalyst Systems for Ammonia Conversion

Platinum catalyst gauzes have been in use since the moment of development of the process of catalyst oxidation of ammonia for production of nitric acid or hydrocyanic acid.Catalyst gauzes are usually made of platinum or its alloys with rhodium and palladium.These precious metals have remarkable properties that make them ideal catalysts for acceleration of the ammonia/oxygen reaction.In 2008,OJSC "SIC 'Supermetal'" and Umicore AG&Co.KG launched a production line for Pt-alloy-based catalyst systems to be used for ammonia oxidation in the production of weak nitric acid.Catalyst systems consist of a pack of catalyst gauzes and a pack of catchment gauzes,which are made using flat-bed knitting machines and wire-cloth looms.Today,up-to-date catalyst systems MKSprecise TM are being manufactured,the basic advantages of which are an individual structure of gauzes and composition of the material,which allows to define precisely the position of each gauze in the catalyst pack,a high activity of the catalyst pack,direct catching of platinum and rhodium in the catalyst system,and a reasonable combination of single-and multilayer types of gauzes.This makes it possible to vary the configuration of the catalyst and select an optimum composition of the system to ensure the maximum efficiency of the ammonia oxidation process.We also produce the catchment systems that allow to find the best decision from the economic point view for each individual case.

Current status of the geological disposal programme and an overview of the safety case at the pre-siting stage in Japan

In Japan,high-level radioactive waste and specific low-level radioactive waste which includes long-lived radionuclides are planned to be disposed of in the geological formations at depths greater than 300 m.The disposal site will be selected through a stepwise site investigation process that consists of a Literature Survey,Preliminary Investigation,and Detailed Investigation phases.In October 2020 a Literature Survey was launched in Japan at two municipalities in Hokkaido for the first time since NUMO initiated a nationwide call for volunteer municipalities in 2002,and the outcomes are currently being compiled.To enhance the public’s understanding of how to implement safe geological disposal in Japan based on the latest scientific knowledge and technology,NUMO,as the implementing organisation,developed and published a safety case for geological disposal at the pre-siting stage.This safety case provides multiple lines of arguments and evidence to demonstrate the feasibility of the geological disposal and a basic structure for a safety case that will be applicable to any potential sites in Japan.The safety case also presented some R&D challenges to enhance the technical confidence of the project,including the R&D topics related to rock mechanics.This report presents the current status of the geological disposal programme in Japan,together with the status of the Literature Survey phase and an overview of the NUMO safety case.

Evolutionary history and climate conditions constrain the flower colours of woody plants in China

In this study,we investigated(i)the differences in flower colour composition among growth forms of woody plants in China and(ii)the influences of biogeographic regions,evolutionary age and climatic conditions on geographic variation in the proportions of different flower colours.Using distribution maps and flower colour information(white,red,yellow,yellow-green,green and blue-purple)of 7673 Chinese woody plant species and a dated genus-level phylogenetic tree,we compared flower colour composition among different growth forms(shrubs,trees and lianas).We further estimated the relationships of geographical patterns in the proportions of different flower colours with seven different biogeographic regions,evolutionary age and different contemporary climatic variables.Compared with trees or lianas,shrubs showed a higher proportion of species with anthocyanin-based red and blue-purple flowers.The geographic patterns of flower colour composition of woody plants in China were strongly influenced by regional effects and contemporary climate,especially precipitation and ultraviolet B irradiance.The proportion of species with presumably bee-pollinated yellow and blue-purple flowers and stress tolerant anthocyanin-based red and blue-purple flower colours tended to be high in the northwestern part of China.Green flowers tended to evolve earlier than others,but evolutionary age had quite weak influences on the geographic pattern of flower colours.Our results reflect both evolutionary and environmental constraints on the distribution of flower colours of woody plants in China.