A two-dimensional (2D) fluid model is presented to study the behavior of silicon plasma mixed with SiH4 , N2 , and NH3 in a radio-frequency capacitively coupled plasma (CCP) reactor. The plasma–wall interaction ...A two-dimensional (2D) fluid model is presented to study the behavior of silicon plasma mixed with SiH4 , N2 , and NH3 in a radio-frequency capacitively coupled plasma (CCP) reactor. The plasma–wall interaction (including the deposition) is modeled by using surface reaction coefficients. In the present paper we try to identify, by numerical simulations, the effect of variations of the process parameters on the plasma properties. It is found from our simulations that by increasing the gas pressure and the discharge gap, the electron density profile shape changes continuously from an edge-high to a center-high, thus the thin films become more uniform. Moreover, as the N2 /NH3 ratio increases from 6/13 to 10/9, the hydrogen content can be significantly decreased, without decreasing the electron density significantly.展开更多
[Objectives]To explore the extraction conditions of essential oil from eucalyptus leaves.[Methods]The essential oil of eucalyptus leaves was extracted by steam distillation,and the yields of essential oil from eucalyp...[Objectives]To explore the extraction conditions of essential oil from eucalyptus leaves.[Methods]The essential oil of eucalyptus leaves was extracted by steam distillation,and the yields of essential oil from eucalyptus leaves under different extraction times,soaking times and different solid-liquid ratios were analyzed through orthogonal test with three factors and three variables.[Results]The effects of various factors on extraction results were:distillation time>solid-liquid ratio>soaking time.When the extraction time and soaking time were 1.5 and 2 h,and the solid-liquid ratio of eucalyptus leaves to distilled water was 1:10,the yield of essential oil was the highest(0.8%).The yield of essential oil increased with the increase of extraction and soaking time,but when reaching the optimal value,the yield decreased with the extension of time.Increasing the solid-liquid ratio can improve the yield of essential oil,but beyond a certain value the yield increased gradually while the cost performance decreased.[Conclusions]The results will provide some reference for the recovery and utilization of eucalyptus leaves.展开更多
Potassium bismuth titanate nanosized powders were prepared by the hydrothermal method using Ti(C_4H_9O)_4 and Bi(NO_3)_3·5H_2O as raw materials in alkaline solution.The phase composition,particle size and morphol...Potassium bismuth titanate nanosized powders were prepared by the hydrothermal method using Ti(C_4H_9O)_4 and Bi(NO_3)_3·5H_2O as raw materials in alkaline solution.The phase composition,particle size and morphology of the powders were studied by XRD and TEM analysis.The results showed that the powders were well crystallized and dispersed.The crystal phase of the powders was K_(0.5)Bi_(0.5)TiO_3 with the grain size of about 50 nm~100 nm.Hydrothermal temperature and alkaline concentrations had great effects on the phase composition and morphology of the resultant powders.Pure K_(0.5)Bi_(0.5)TiO_3 powders could be synthesized at 170℃~180℃with KOH concentration of 8 mol/L~12 mol/L.展开更多
The exergy losses and thermodynamic efficiency of MSF plant with brine recirculation are discussed bymeans of temperature difference functions proposed by the auther.In a MSF plant,the irreversible losses are found ma...The exergy losses and thermodynamic efficiency of MSF plant with brine recirculation are discussed bymeans of temperature difference functions proposed by the auther.In a MSF plant,the irreversible losses are found mainly in irreversible heat-transfer and flash evaporationprocesses.However,the basic variables are the temperature drop from stage to stage and the temperaturedifferences between flashed vapor and cooling water.In this paper,the flash temperature difference func-tion,the heat transfer temperature difference function and the total temperature difference function are sug-gested.The proposed temperature difference functions of MSF plant provide a convenient tool to analyse theirreversible behavior and evaluate the exergetic efficiency of this system,because without such improvement thecalculation of the exergetic efficiency of a MSF plant according to the classical formula will be not onlyinconvenient but also insignificant.As a result of present analysis,the reasonable parameters based on theenergy consumption are easily chosen.The above-mentioned principles are confirmed by commercial plants and a pilot plant in Tianjin.展开更多
The effect of the deformation condition on the axial compressive precision forming process of tube with curling die was investigated by using a rigid-plastic FEM. The results show that the forming accuracy depends mai...The effect of the deformation condition on the axial compressive precision forming process of tube with curling die was investigated by using a rigid-plastic FEM. The results show that the forming accuracy depends mainly on geometric condition rp/d0, little on tube material properties and friction condition; the relative gap △/2rp of double-walled tubes obtained decreases with Increasing rp/d0, and there is a parameter k for a given to/do or rp/t0, when rp/d0 >k, △/2rp< 1, otherwise △/2rp>1.展开更多
[Objectives] To study the optimal extraction process for polysaccharides of Urtica fissa E. Pritz. [Methods] Leaves of wild U. fissa E. Pritz. collected in Nyingchi of Tibet were used as raw materials. Water extractio...[Objectives] To study the optimal extraction process for polysaccharides of Urtica fissa E. Pritz. [Methods] Leaves of wild U. fissa E. Pritz. collected in Nyingchi of Tibet were used as raw materials. Water extraction method was used to extract polysaccharides from U. fissa E. Pritz. Besides,comparison was made for the effects of extraction time,extraction temperature and solid-to-liquid ratio on the yield rate of polysaccharides from U. fissa E. Pritz. In addition,using the extraction time,extraction temperature and solid-to-liquid ratio as factors,L9( 33) orthogonal experiment was carried out to determine the optimal process parameters for water extraction of polysaccharides from U. fissa E. Pritz.[Results] The optimal process parameters: hot water extraction time was 4 h,the extraction temperature was 90℃,and the mass ratio of water to leaves of U. fissa E. Pritz. was 1∶ 25. Under such extraction conditions,the yield rate of polysaccharides from U. fissa E. Pritz.was up to 11. 611%. [Conclusions]This experiment is expected to provide certain reference for reasonable development and utilization of wild U. fissa E. Pritz. resources in Tibet.展开更多
Ground condition and construction (excavation and support) time and costs are the key factors in decision-making during planning and design phases of a tunnel project. An innovative methodology for probabilistic est...Ground condition and construction (excavation and support) time and costs are the key factors in decision-making during planning and design phases of a tunnel project. An innovative methodology for probabilistic estimation of ground condition and construction time and costs is proposed, which is an integration of the ground prediction approach based on Markov process, and the time and cost variance analysis based on Monte-Carlo (MC) simulation. The former provides the probabilistic description of ground classification along tunnel alignment according to the geological information revealed from geological profile and boreholes. The latter provides the probabilistic description of the expected construction time and costs for each operation according to the survey feedbacks from experts. Then an engineering application to Hamro tunnel is presented to demonstrate how the ground condition and the construction time and costs are estimated in a probabilistic way. In most items, in order to estimate the data needed for this methodology, a number of questionnaires are distributed among the tunneling experts and finally the mean values of the respondents are applied. These facilitate both the owners and the contractors to be aware of the risk that they should carry before construction, and are useful for both tendering and bidding.展开更多
基金Project supported by the China Postdoctoral Science Foundation (Grant No. 2012M511603)the National Natural Science Foundation of China (Grant Nos. 11105057 and 10775025)+1 种基金the Natural Science Foundation of Hubei Province of China (Grant No. 2007ABA035)the Program for New Century Excellent Talents in University of China (Grant No. NCET-08-0073)
文摘A two-dimensional (2D) fluid model is presented to study the behavior of silicon plasma mixed with SiH4 , N2 , and NH3 in a radio-frequency capacitively coupled plasma (CCP) reactor. The plasma–wall interaction (including the deposition) is modeled by using surface reaction coefficients. In the present paper we try to identify, by numerical simulations, the effect of variations of the process parameters on the plasma properties. It is found from our simulations that by increasing the gas pressure and the discharge gap, the electron density profile shape changes continuously from an edge-high to a center-high, thus the thin films become more uniform. Moreover, as the N2 /NH3 ratio increases from 6/13 to 10/9, the hydrogen content can be significantly decreased, without decreasing the electron density significantly.
基金Supported by Doctoral Start-up Fund of Guangxi Minzu Normal University(2021 BS003).
文摘[Objectives]To explore the extraction conditions of essential oil from eucalyptus leaves.[Methods]The essential oil of eucalyptus leaves was extracted by steam distillation,and the yields of essential oil from eucalyptus leaves under different extraction times,soaking times and different solid-liquid ratios were analyzed through orthogonal test with three factors and three variables.[Results]The effects of various factors on extraction results were:distillation time>solid-liquid ratio>soaking time.When the extraction time and soaking time were 1.5 and 2 h,and the solid-liquid ratio of eucalyptus leaves to distilled water was 1:10,the yield of essential oil was the highest(0.8%).The yield of essential oil increased with the increase of extraction and soaking time,but when reaching the optimal value,the yield decreased with the extension of time.Increasing the solid-liquid ratio can improve the yield of essential oil,but beyond a certain value the yield increased gradually while the cost performance decreased.[Conclusions]The results will provide some reference for the recovery and utilization of eucalyptus leaves.
文摘Potassium bismuth titanate nanosized powders were prepared by the hydrothermal method using Ti(C_4H_9O)_4 and Bi(NO_3)_3·5H_2O as raw materials in alkaline solution.The phase composition,particle size and morphology of the powders were studied by XRD and TEM analysis.The results showed that the powders were well crystallized and dispersed.The crystal phase of the powders was K_(0.5)Bi_(0.5)TiO_3 with the grain size of about 50 nm~100 nm.Hydrothermal temperature and alkaline concentrations had great effects on the phase composition and morphology of the resultant powders.Pure K_(0.5)Bi_(0.5)TiO_3 powders could be synthesized at 170℃~180℃with KOH concentration of 8 mol/L~12 mol/L.
文摘The exergy losses and thermodynamic efficiency of MSF plant with brine recirculation are discussed bymeans of temperature difference functions proposed by the auther.In a MSF plant,the irreversible losses are found mainly in irreversible heat-transfer and flash evaporationprocesses.However,the basic variables are the temperature drop from stage to stage and the temperaturedifferences between flashed vapor and cooling water.In this paper,the flash temperature difference func-tion,the heat transfer temperature difference function and the total temperature difference function are sug-gested.The proposed temperature difference functions of MSF plant provide a convenient tool to analyse theirreversible behavior and evaluate the exergetic efficiency of this system,because without such improvement thecalculation of the exergetic efficiency of a MSF plant according to the classical formula will be not onlyinconvenient but also insignificant.As a result of present analysis,the reasonable parameters based on theenergy consumption are easily chosen.The above-mentioned principles are confirmed by commercial plants and a pilot plant in Tianjin.
基金The authors would like to thank NSFC for support toenable the performing of this research (No. 59775055).
文摘The effect of the deformation condition on the axial compressive precision forming process of tube with curling die was investigated by using a rigid-plastic FEM. The results show that the forming accuracy depends mainly on geometric condition rp/d0, little on tube material properties and friction condition; the relative gap △/2rp of double-walled tubes obtained decreases with Increasing rp/d0, and there is a parameter k for a given to/do or rp/t0, when rp/d0 >k, △/2rp< 1, otherwise △/2rp>1.
基金Supported by Project of Natural Science Foundation of Tibet Autonomous Region(2016ZR-15-31)
文摘[Objectives] To study the optimal extraction process for polysaccharides of Urtica fissa E. Pritz. [Methods] Leaves of wild U. fissa E. Pritz. collected in Nyingchi of Tibet were used as raw materials. Water extraction method was used to extract polysaccharides from U. fissa E. Pritz. Besides,comparison was made for the effects of extraction time,extraction temperature and solid-to-liquid ratio on the yield rate of polysaccharides from U. fissa E. Pritz. In addition,using the extraction time,extraction temperature and solid-to-liquid ratio as factors,L9( 33) orthogonal experiment was carried out to determine the optimal process parameters for water extraction of polysaccharides from U. fissa E. Pritz.[Results] The optimal process parameters: hot water extraction time was 4 h,the extraction temperature was 90℃,and the mass ratio of water to leaves of U. fissa E. Pritz. was 1∶ 25. Under such extraction conditions,the yield rate of polysaccharides from U. fissa E. Pritz.was up to 11. 611%. [Conclusions]This experiment is expected to provide certain reference for reasonable development and utilization of wild U. fissa E. Pritz. resources in Tibet.
文摘Ground condition and construction (excavation and support) time and costs are the key factors in decision-making during planning and design phases of a tunnel project. An innovative methodology for probabilistic estimation of ground condition and construction time and costs is proposed, which is an integration of the ground prediction approach based on Markov process, and the time and cost variance analysis based on Monte-Carlo (MC) simulation. The former provides the probabilistic description of ground classification along tunnel alignment according to the geological information revealed from geological profile and boreholes. The latter provides the probabilistic description of the expected construction time and costs for each operation according to the survey feedbacks from experts. Then an engineering application to Hamro tunnel is presented to demonstrate how the ground condition and the construction time and costs are estimated in a probabilistic way. In most items, in order to estimate the data needed for this methodology, a number of questionnaires are distributed among the tunneling experts and finally the mean values of the respondents are applied. These facilitate both the owners and the contractors to be aware of the risk that they should carry before construction, and are useful for both tendering and bidding.