Elevating the flexibility and operability of dividing-wall distillation columns via feed thermal condition adjustment

Because of the complicated interplay between the prefractionator and main distillation column involved,the black-hole problem might occur and prohibit the assignment of four specifications to dividing-wall distillation columns(DWDCs)(e.g., the three main product compositions plus an impurity ratio in the intermediate product), which lowers terribly process flexibility and operability. In this paper, a feed thermal condition adjustment strategy, achieved by the installation of a pre-heater in feed pipeline, is employed to eliminate the black-hole problem and serve to enhance process flexibility and operability. Through the strong influence to the overall mass and energy balance of the DWDC, the feed thermal condition adjustment can alter the interlinking flows between the thermally coupled prefractionator and main distillation column and work effectively to coordinate their relationship. A DWDC separating a benzene, toluene, and o-xylene mixture is chosen to ascertain the feasibility of the philosophy proposed. The static and dynamic studies demonstrate that the feed thermal condition adjustment is an effective way to refine process design and can completely eliminate the black-hole problem and elevate consequently process flexibility and operability.

烟叶分组制丝工艺的生产线技术改造

以常德卷烟厂一条生产线为例,对传统烟叶实施分组制丝工艺的生产线技术改造作了详细介绍。

Recent advances of flexible perovskite solar cells

In few years only, the efficiency record of perovskite solar cells（PSCs） has raised quickly from 3.8% to over 22%. This emerging photovoltaic technology has primarily shown its great potential of industrialization. Flexible PSCs are thought to be one of the most priority options for mass production, related to the intrinsic advantage of perovskite thin films which could be deposited by facile solution processes at low temperature. Flexible PSCs have at least four advantages in comparison to the rigid counterpart：（1） it can generate higher power output at lighter weight,（2） it is easily portable,（3） it can be easily attached to architectures or textiles with diverse shapes, and（4） it is compatible with roll-to-roll fabrication in a large scale. In this review, we have summarized recent development of the key materials and technologies applied in flexible PSCs. The key materials including flexible substrates, transparent and conductive electrodes, and interfacial materials; some key technologies about roll-to-roll manufacture, encapsulation technology have been overviewed. Finally, a prospect on possible application directions of flexible PSCs has been discussed.

Association between Phthalate Exposure and the Use of Plastic Containers in Shanghai Adults

Objective Consuming phthalates may be due to the presence of food contact materials, such as plastic containers. In this study, we investigated the association between plastic container use and phthalate exposure in 2,140 Shanghai adults. Methods Participants completed a questionnaire on the frequency of using plastic containers in different scenarios in the previous year （e.g., daily, weekly） and on the consumption of plastic-packaged foods in the previous three days （yes or no）. Urinary phthalate metabolites were used to assess the association between phthalate exposure and the use of plastic containers. Results The metabolites of di-（2-ethylhexyl） phthalate （DEHP） were the most frequently detected in urine. The results revealed that phthalate exposure was associated with consumption of plastic-packaged breakfast or processed food items in the previous three days. The consumption of these two food items had strong synergistic effects on increasing urinary concentrations of most phthalate metabolites. Conclusion Our results of plastic-packaged breakfast and processed food may be explained by the use of flexible plastic containers, indicating the importance of risk assessment for the application of flexible plastic containers.

Interfacial engineering of printable bottom back metal electrodes for full-solution processed flexible organic solar cells

Printing of metal bottom back electrodes of flexible organic solar cells（FOSCs） at low temperature is of great significance to realize the full-solution fabrication technology. However, this has been difficult to achieve because often the interfacial properties of those printed electrodes, including conductivity, roughness, work function,optical and mechanical flexibility, cannot meet the device requirement at the same time. In this work, we fabricate printed Ag and Cu bottom back cathodes by a low-temperature solution technique named polymer-assisted metal deposition（PAMD） on flexible PET substrates. Branched polyethylenimine（PEI） and ZnO thin films are used as the interface modification layers（IMLs） of these cathodes. Detailed experimental studies on the electrical, mechanical, and morphological properties, and simulation study on the optical properties of these IMLs are carried out to understand and optimize the interface of printed cathodes. We demonstrate that the highest power conversion efficiency over 3.0% can be achieved from a full-solution processed OFSC with the device structure being PAMDAg/PEI/P3 HT：PC61BM/PH1000. This device also acquires remarkable stability upon repeating bending tests.

Flexible polarization demultiplexing method based on an adaptive process noise covariance Kalman filter

A flexible polarization demultiplexing method based on an adaptive Kalman filter（AKF） is proposed in which the process noise covariance has been estimated adaptively. The proposed method may significantly improve the adaptive capability of an extended Kalman filter（EKF） by adaptively estimating the unknown process noise covariance. Compared to the conventional EKF, the proposed method can avoid the tedious and time consuming parameter-by-parameter tuning operations. The effectiveness of this method is confirmed experimentally in 128 Gb/s 16 QAM polarization-division-multiplexing（PDM） coherent optical transmission systems. The results illustrate that our proposed AKF has a better tracking accuracy and a faster convergence（about 4 times quicker）compared to a conventional algorithm with optimal process noise covariance.

Fabrication techniques and applications of flexible graphene-based electronic devices

In recent years, flexible electronic devices have become a hot topic of scientific research. These flexible devices are the basis of flexible circuits, flexible batteries, flexible displays and electronic skins. Graphene-based materials are very promising for flexible electronic devices, due to their high mobility, high elasticity, a tunable band gap, quantum electronic transport and high mechanical strength. In this article, we review the recent progress of the fabrication process and the applications of graphene-based electronic devices, including thermal acoustic devices, thermal rectifiers, graphene-based nanogenerators, pressure sensors and graphene-based light-emitting diodes. In summary, although there are still a lot of challenges needing to be solved, graphene-based materials are very promising for various flexible device applications in the future.