The present work aimed to investigate the effect of coiling process conditions on microstructure development in a low-Si content TRIP （transformation-induced plasticity）-assisted steel after thermomechanical process...The present work aimed to investigate the effect of coiling process conditions on microstructure development in a low-Si content TRIP （transformation-induced plasticity）-assisted steel after thermomechanical processing. In this framework, compression samples which were deformed above Tnr and then intercritically annealed were held isothermally for different durations at temperatures below bainite transformation start temperature. Microstructure of samples were characterized by optical and electron microscopy, XRD （X-ray diffraction） and M6ssbauer spectroscopy. The results indicated that due to low-silicon content of the present steel, the incomplete bainite reaction phenomena was not observed and, hence, the maximum carbon enrichment of residual austenite was achieved in the samples which held for short durations. It was also shown that the maximum carbon enrichment and volume fraction of residual austenite were achieved at intermediate bainite hold temperature of 450 ℃ as the result of competing phenomena, such as microstructural refinement, dislocation density, carbide precipitation and growth.展开更多
The coil cooling and its role in a hot strip mill were reviewed. A mathematical model was developed to describe and analyze the thermal history and its impact on precipitation phenomena during coil cooling for plain c...The coil cooling and its role in a hot strip mill were reviewed. A mathematical model was developed to describe and analyze the thermal history and its impact on precipitation phenomena during coil cooling for plain carbon, HSLA-V and HSLA-Nb steels. The predicted result of the thermal model was compared with that measured from industrial coil. The effect of cooling condition and coil dimension on the thermal history and final mechanical properties of the steel strip was examined. The coiling temperature and cooling rate have crucial influence on the precipitation strengthening.展开更多
Control precision of coiling temperature is one of the key factors affecting the profile shape and surface quality during the cooling process of hot rolled steel strip.For this reason,the core of temperature control p...Control precision of coiling temperature is one of the key factors affecting the profile shape and surface quality during the cooling process of hot rolled steel strip.For this reason,the core of temperature control precision is to establish an effective cooling mathematical model with self-learning function.Starting from this point,a cooling mathematical model with nonlinear structural characteristics is established in this paper for the cooling process of hot rolled steel strip.By the analysis of self-learning ability,key parameters of the mathematical model could be constantly corrected so as to improve temperature control precision and adaptive capability of the model.The site actual application results proved the stable performance and high control precision of the proposed mathematical model,which would lay a solid foundation to improve the steel product qualities.展开更多
Monitoring systems for elderly require a compromise between reduced size and operational autonomy. The latter to get a system as independent as possible and to fit with our application needs for daily use. Our patch i...Monitoring systems for elderly require a compromise between reduced size and operational autonomy. The latter to get a system as independent as possible and to fit with our application needs for daily use. Our patch is developed as a surveillance system for old people;we chose to equip it with a wireless charging system for greater ease of use, imperceptible in the everyday life and waterproofing. This paper presents the development of a printed receiver coil to be integrated in a wireless charger to be used in an elderly tracking patch. The proposed design is validated using simulation that presents a good agreement with measurement results: Simulation (@150 KHz: L = 10.74 μH;R = 3 Ω) and Measurement (@150 KHz: L = 10.8 μH;R = 3.16 Ω). The receiver coil is elaborated on a polyimide substrate in the cleanroom of our laboratory LAAS-CNRS (Laboratory for Analysis and Architecture of Systems-National Center for Scientific Research) and a PCB (Printed Circuit Board) charger prototype is fabricated to test its performances before the integration of the wireless charging property in the tracking patch. The proposed coil presents a good compromise between small size and efficiency. For a charging current of 7.5 mA, this coil can ensure the recharging of the patch up to a distance of 4.8 mm between the Qi transmitter and receiver which is more than enough for our application.展开更多
Many strip materials are coiled after rolling process. The stresses are imposed on the material wound on the automatically controlled collapse mandrel under the coiling tension. The coiling process can be described by...Many strip materials are coiled after rolling process. The stresses are imposed on the material wound on the automatically controlled collapse mandrel under the coiling tension. The coiling process can be described by three typical cases: winding without automatic adjustment, winding with automatic adjustment and after mandrel removal. A new model of equations for predicting the stresses during the strip coiling process is built by consideration of the three cases respectively. By solving the equations of different typical cases, the radial stresses and tangential stress of the layers of coil can be calculated. Also, the coiling parameters, such as strip thickness, coiling tension and necking critical pressure, affecting the coil performance are investigated. It is believed that the present model can be used for design and control of the automatically controlled collapse mandrel.展开更多
文摘The present work aimed to investigate the effect of coiling process conditions on microstructure development in a low-Si content TRIP （transformation-induced plasticity）-assisted steel after thermomechanical processing. In this framework, compression samples which were deformed above Tnr and then intercritically annealed were held isothermally for different durations at temperatures below bainite transformation start temperature. Microstructure of samples were characterized by optical and electron microscopy, XRD （X-ray diffraction） and M6ssbauer spectroscopy. The results indicated that due to low-silicon content of the present steel, the incomplete bainite reaction phenomena was not observed and, hence, the maximum carbon enrichment of residual austenite was achieved in the samples which held for short durations. It was also shown that the maximum carbon enrichment and volume fraction of residual austenite were achieved at intermediate bainite hold temperature of 450 ℃ as the result of competing phenomena, such as microstructural refinement, dislocation density, carbide precipitation and growth.
文摘The coil cooling and its role in a hot strip mill were reviewed. A mathematical model was developed to describe and analyze the thermal history and its impact on precipitation phenomena during coil cooling for plain carbon, HSLA-V and HSLA-Nb steels. The predicted result of the thermal model was compared with that measured from industrial coil. The effect of cooling condition and coil dimension on the thermal history and final mechanical properties of the steel strip was examined. The coiling temperature and cooling rate have crucial influence on the precipitation strengthening.
基金Project supported by the National Key Technology Research and Development Program (Grant No.2006BAE03A08)
文摘Control precision of coiling temperature is one of the key factors affecting the profile shape and surface quality during the cooling process of hot rolled steel strip.For this reason,the core of temperature control precision is to establish an effective cooling mathematical model with self-learning function.Starting from this point,a cooling mathematical model with nonlinear structural characteristics is established in this paper for the cooling process of hot rolled steel strip.By the analysis of self-learning ability,key parameters of the mathematical model could be constantly corrected so as to improve temperature control precision and adaptive capability of the model.The site actual application results proved the stable performance and high control precision of the proposed mathematical model,which would lay a solid foundation to improve the steel product qualities.
文摘Monitoring systems for elderly require a compromise between reduced size and operational autonomy. The latter to get a system as independent as possible and to fit with our application needs for daily use. Our patch is developed as a surveillance system for old people;we chose to equip it with a wireless charging system for greater ease of use, imperceptible in the everyday life and waterproofing. This paper presents the development of a printed receiver coil to be integrated in a wireless charger to be used in an elderly tracking patch. The proposed design is validated using simulation that presents a good agreement with measurement results: Simulation (@150 KHz: L = 10.74 μH;R = 3 Ω) and Measurement (@150 KHz: L = 10.8 μH;R = 3.16 Ω). The receiver coil is elaborated on a polyimide substrate in the cleanroom of our laboratory LAAS-CNRS (Laboratory for Analysis and Architecture of Systems-National Center for Scientific Research) and a PCB (Printed Circuit Board) charger prototype is fabricated to test its performances before the integration of the wireless charging property in the tracking patch. The proposed coil presents a good compromise between small size and efficiency. For a charging current of 7.5 mA, this coil can ensure the recharging of the patch up to a distance of 4.8 mm between the Qi transmitter and receiver which is more than enough for our application.
文摘Many strip materials are coiled after rolling process. The stresses are imposed on the material wound on the automatically controlled collapse mandrel under the coiling tension. The coiling process can be described by three typical cases: winding without automatic adjustment, winding with automatic adjustment and after mandrel removal. A new model of equations for predicting the stresses during the strip coiling process is built by consideration of the three cases respectively. By solving the equations of different typical cases, the radial stresses and tangential stress of the layers of coil can be calculated. Also, the coiling parameters, such as strip thickness, coiling tension and necking critical pressure, affecting the coil performance are investigated. It is believed that the present model can be used for design and control of the automatically controlled collapse mandrel.
