This article concerns a class of Ornstein-Uhlenbeck type Markov processes and for which the level sets will be approached. By constructing a new class f processes, we shall obtain an inequality on the Hausdorff dimens...This article concerns a class of Ornstein-Uhlenbeck type Markov processes and for which the level sets will be approached. By constructing a new class f processes, we shall obtain an inequality on the Hausdorff dimensions of the level sets for the Ornstein-Uhlenbeck type Markov processes. Based on this result, we finally verify that any two independent O-U.M.P with alpha-stable processes could collide with probability one.展开更多
Modeling log-mortality rates on O-U type processes and forecasting life expectancies are explored using U.S. data. In the classic Lee-Carter model of mortality, the time trend and the age-specific pattern of mortality...Modeling log-mortality rates on O-U type processes and forecasting life expectancies are explored using U.S. data. In the classic Lee-Carter model of mortality, the time trend and the age-specific pattern of mortality over age group are linear, this is not the feature of mortality model. To avoid this disadvantage, O-U type processes will be used to model the log-mortality in this paper. In fact, this model is an AR(1) process, but with a nonlinear time drift term.Based on the mortality data of America from Human Mortality database(HMD), mortality projection consistently indicates a preference for mortality with O-U type processes over those with the classical Lee-Carter model. By means of this model, the low bounds of mortality rates at every age are given. Therefore, lengthening of maximum life expectancies span is estimated in this paper.展开更多
Let {X-t, t greater than or equal to 0} be an Ornstein-Uhlenbeck type Markov process with Levy process A(t), the authors consider the fractal properties of its ranges, give the upper and lower bounds of the Hausdorff ...Let {X-t, t greater than or equal to 0} be an Ornstein-Uhlenbeck type Markov process with Levy process A(t), the authors consider the fractal properties of its ranges, give the upper and lower bounds of the Hausdorff dimensions of the ranges and the estimate of the dimensions of the level sets for the process. The existence of local times and occupation times of X-t are considered in some special situations.展开更多
The effect of gas pressures on the mean pore size, the porosity and the pore size distribution of lotus-type porous magnesium fabricated with Gasar process were investigated. The theoretical analysis and the experimen...The effect of gas pressures on the mean pore size, the porosity and the pore size distribution of lotus-type porous magnesium fabricated with Gasar process were investigated. The theoretical analysis and the experimental results all indicate that there exists an optimal ratio of the partial pressures of hydrogen PH2 to argon PAr for producing lotus-type structures with narrower pore size distribution and smaller pore size. The effect of solidification mode on the pore size distribution and pore size was also discussed.展开更多
A large Type Ⅳμ solar radio burst was observed at Yunnan observatory on December 16, 1988. The burst was associated by a coronal mass ejection (CME) with the radio signature of Type Ⅱ and Type Ⅳ bursts. On the bas...A large Type Ⅳμ solar radio burst was observed at Yunnan observatory on December 16, 1988. The burst was associated by a coronal mass ejection (CME) with the radio signature of Type Ⅱ and Type Ⅳ bursts. On the basis of Beijing Huairou magnetogram of AR5278, power law distribution of electrons of the source region is calculated. It is suggested that the Type Ⅳμ burst associated with CME was due to the gyrosynchrotron radiation of high energy electrons trapped by magnetic field. Finally, some quantitative and qualitative explanations are proposed.展开更多
As energy crisis and environment pollution all around the world threaten the widespread use of fossil fuels,compressed natural gas(CNG)vehicles are explored as an alternative to the conventional gasoline powered vehic...As energy crisis and environment pollution all around the world threaten the widespread use of fossil fuels,compressed natural gas(CNG)vehicles are explored as an alternative to the conventional gasoline powered vehicles.Because of the limited space available for the car,the composite pressure vessel(TypeⅡ)has been applied to the CNG vehicles to reach large capacity and weight lightening vehicles.High pressure vessel(TypeⅡ)is composed of a composite layer and a metal liner.The metal liner is formed by the deep drawing and ironing(D.D.I.)process,which is a complex process of deep drawing and ironing.The cylinder part is reinforced by composite layer wrapped through the filament winding process and is bonded to the liner by the curing process.In this study,an integrated design method was presented by establishing the techniques for FE analysis of entire processes(D.D.I.,filament winding and curing processes)to manufacture the CNG composite pressure vessel(TypeⅡ).Dimensions of the dies and the punches of the 1 st(cup drawing),2 nd(redrawing-ironing 1-ironing 2)and 3 rd(redrawing-ironing)stages were calculated theoretically,and shape of tractrix die to be satisfied with the minimum forming load was suggested for life improvement and manufacturing costs in the D.D.I.process.Thickness of the composite material was determined in the filament winding process,finally,conditions of the curing process(number of heating stage,curing temperature,heating rate and time)were proposed to reinforce adhesive strength between the composite layers.展开更多
The river continuum concept represents the most general framework addressing the spatial variation of both structure and function in river ecosystems. In the Mediterranean ecoregion, summer drought events and dams con...The river continuum concept represents the most general framework addressing the spatial variation of both structure and function in river ecosystems. In the Mediterranean ecoregion, summer drought events and dams constitute the main sources of local disturbance to the structure and functioning of river ecosystems occurring in the river basin. In this study, we analysed patterns of spatial variation of detritus processing in a 7th order river of the Mediterranean ecoregion(River Tirso, Sardinia-Italy) and in three 4th order sub-basins which were exposed to different summer drought pressures. The study was carried out on Phragmites australis and Alnus glutinosa leaf detritus at 31 field sites in seasonal field experiment Detritus processing rates were higher for Alnus glutinosa than for Phragmites australis plant detritus. Processing rates of Alnus glutinosa leaves varied among seasons and study sites from 0.006 d -1 to 0.189 d -1 and those of Phragmites australis leaves ranged from 0.0008 d -1 to 0.102 d -1, with the lowest values occurring at sites exposed to summer drought. Seasons and sites accounted for a significant proportion of such variability. Alder detritus decay rates generally decreased with increasing stream order, while reed detritus decay rates generally increased on the same spatial gradient. Summer drought events affected these spatial patterns of variation by influencing significantly the decay rates of both plant detritus. The comparisons among and within sub-basins showed strong negative influence of summer drought on detritus processing rates. Similarly, in the entire River Tirso basin decay rates were always lower at disturbed than at undisturbed sites for each stream order; decay rates of reed detritus remained lower at those sites even after the end of the disturbance events, while alder decay rates recovered rapidly from the summer drought perturbations. The different recovery of the processing rates of the two leaves could also explain the different patterns of spatial variation observed between the two leaves.展开更多
文摘This article concerns a class of Ornstein-Uhlenbeck type Markov processes and for which the level sets will be approached. By constructing a new class f processes, we shall obtain an inequality on the Hausdorff dimensions of the level sets for the Ornstein-Uhlenbeck type Markov processes. Based on this result, we finally verify that any two independent O-U.M.P with alpha-stable processes could collide with probability one.
基金Supported by National Social Science Fund of China(17BTJ023)
文摘Modeling log-mortality rates on O-U type processes and forecasting life expectancies are explored using U.S. data. In the classic Lee-Carter model of mortality, the time trend and the age-specific pattern of mortality over age group are linear, this is not the feature of mortality model. To avoid this disadvantage, O-U type processes will be used to model the log-mortality in this paper. In fact, this model is an AR(1) process, but with a nonlinear time drift term.Based on the mortality data of America from Human Mortality database(HMD), mortality projection consistently indicates a preference for mortality with O-U type processes over those with the classical Lee-Carter model. By means of this model, the low bounds of mortality rates at every age are given. Therefore, lengthening of maximum life expectancies span is estimated in this paper.
文摘Let {X-t, t greater than or equal to 0} be an Ornstein-Uhlenbeck type Markov process with Levy process A(t), the authors consider the fractal properties of its ranges, give the upper and lower bounds of the Hausdorff dimensions of the ranges and the estimate of the dimensions of the level sets for the process. The existence of local times and occupation times of X-t are considered in some special situations.
基金This research was supported by the National Natural Science Foundation of China （No. 50404002）National Program on Key Basic Research Projects （No. 2004CCA05100）.
文摘The effect of gas pressures on the mean pore size, the porosity and the pore size distribution of lotus-type porous magnesium fabricated with Gasar process were investigated. The theoretical analysis and the experimental results all indicate that there exists an optimal ratio of the partial pressures of hydrogen PH2 to argon PAr for producing lotus-type structures with narrower pore size distribution and smaller pore size. The effect of solidification mode on the pore size distribution and pore size was also discussed.
文摘A large Type Ⅳμ solar radio burst was observed at Yunnan observatory on December 16, 1988. The burst was associated by a coronal mass ejection (CME) with the radio signature of Type Ⅱ and Type Ⅳ bursts. On the basis of Beijing Huairou magnetogram of AR5278, power law distribution of electrons of the source region is calculated. It is suggested that the Type Ⅳμ burst associated with CME was due to the gyrosynchrotron radiation of high energy electrons trapped by magnetic field. Finally, some quantitative and qualitative explanations are proposed.
基金Supported by National Research Foundation of Korea(NRF)Korea Government(MSIT)(Grant No.2019R1F1A1058521)
文摘As energy crisis and environment pollution all around the world threaten the widespread use of fossil fuels,compressed natural gas(CNG)vehicles are explored as an alternative to the conventional gasoline powered vehicles.Because of the limited space available for the car,the composite pressure vessel(TypeⅡ)has been applied to the CNG vehicles to reach large capacity and weight lightening vehicles.High pressure vessel(TypeⅡ)is composed of a composite layer and a metal liner.The metal liner is formed by the deep drawing and ironing(D.D.I.)process,which is a complex process of deep drawing and ironing.The cylinder part is reinforced by composite layer wrapped through the filament winding process and is bonded to the liner by the curing process.In this study,an integrated design method was presented by establishing the techniques for FE analysis of entire processes(D.D.I.,filament winding and curing processes)to manufacture the CNG composite pressure vessel(TypeⅡ).Dimensions of the dies and the punches of the 1 st(cup drawing),2 nd(redrawing-ironing 1-ironing 2)and 3 rd(redrawing-ironing)stages were calculated theoretically,and shape of tractrix die to be satisfied with the minimum forming load was suggested for life improvement and manufacturing costs in the D.D.I.process.Thickness of the composite material was determined in the filament winding process,finally,conditions of the curing process(number of heating stage,curing temperature,heating rate and time)were proposed to reinforce adhesive strength between the composite layers.
文摘The river continuum concept represents the most general framework addressing the spatial variation of both structure and function in river ecosystems. In the Mediterranean ecoregion, summer drought events and dams constitute the main sources of local disturbance to the structure and functioning of river ecosystems occurring in the river basin. In this study, we analysed patterns of spatial variation of detritus processing in a 7th order river of the Mediterranean ecoregion(River Tirso, Sardinia-Italy) and in three 4th order sub-basins which were exposed to different summer drought pressures. The study was carried out on Phragmites australis and Alnus glutinosa leaf detritus at 31 field sites in seasonal field experiment Detritus processing rates were higher for Alnus glutinosa than for Phragmites australis plant detritus. Processing rates of Alnus glutinosa leaves varied among seasons and study sites from 0.006 d -1 to 0.189 d -1 and those of Phragmites australis leaves ranged from 0.0008 d -1 to 0.102 d -1, with the lowest values occurring at sites exposed to summer drought. Seasons and sites accounted for a significant proportion of such variability. Alder detritus decay rates generally decreased with increasing stream order, while reed detritus decay rates generally increased on the same spatial gradient. Summer drought events affected these spatial patterns of variation by influencing significantly the decay rates of both plant detritus. The comparisons among and within sub-basins showed strong negative influence of summer drought on detritus processing rates. Similarly, in the entire River Tirso basin decay rates were always lower at disturbed than at undisturbed sites for each stream order; decay rates of reed detritus remained lower at those sites even after the end of the disturbance events, while alder decay rates recovered rapidly from the summer drought perturbations. The different recovery of the processing rates of the two leaves could also explain the different patterns of spatial variation observed between the two leaves.
