A Process Oriented Integration Model for Smart Health Services

Cities are facing challenges of high rise in population number and con-sequently need to be equipped with latest smart services to provide luxuries of life to its residents.Smart integrated solutions are also a need to deal with the social and environmental challenges,caused by increasing urbanization.Currently,the development of smart services’integrated network,within a city,is facing the bar-riers including;less efficient collection and sharing of data,along with inadequate collaboration of software and hardware.Aiming to resolve these issues,this paper recommended a solution for a synchronous functionality in the smart services’integration process through modeling technique.Using this integration modeling solution,atfirst,the service participants,processes and tasks of smart services are identified and then standard illustrations are developed for the better understand-ing of the integrated service group environment.Business process modeling and notation(BPMN)language based models are developed and discussed for a devised case study,to test and experiment i.e.,for remote healthcare from a smart home.The research is concluded with the integration process model application for the required data sharing among different service groups.The outcomes of the modeling are better understanding and attaining maximum automation that can be referenced and replicated.

Process design and intensification of multicomponent azeotropes special distillation separation via molecular simulation and system optimization

This work provides an overview of distillation processes,including process design for different distillation processes,selection of entrainers for special distillation processes,system integration and intensification of distillation processes,optimization of process parameters for distillation processes and recent research progress in dynamic control strategies.Firstly,the feasibility of using thermodynamic topological theories such as residual curve,phase equilibrium line and distillation boundary line to analyze different separation regions is discussed,and the rationality of distillation process design is discussed by using its feasibility.Secondly,the application of molecular simulation methods such as molecular dynamics simulation and quantum chemical calculation in the screening of entrainer is discussed for the extractive distillation process.The thermal coupling mechanism of different distillation processes is used to explore the process of different process intensifications.Next,a mixed integer nonlinear optimization strategy for the distillation process based on different algorithms is introduced.Finally,the improvement of dynamic control strategies for different distillation processes in recent years is summarized.This work focuses on the application of process intensification and system optimization in the design of distillation process,and analyzes the challenges,prospects,and development trends of distillation technology in the separation of multicomponent azeotropes.

A review on plasma-based CO_(2) utilization:process considerations in the development of sustainable chemical production

Plasma-based processes,particularly in carbon capture and utilization,hold great potential for addressing environmental challenges and advancing a circular carbon economy.While significant progress has been made in understanding plasma-induced reactions,plasma-catalyst interactions,and reactor development to enhance energy efficiency and conversion,there remains a notable gap in research concerning overall process development.This review emphasizes the critical need for considerations at the process level,including integration and intensification,to facilitate the industrialization of plasma technology for chemical production.Discussions centered on the development of plasma-based processes are made with a primary focus on CO_(2) conversion,offering insights to guide future work for the transition of the technology from laboratory scale to industrial applications.Identification of current research gaps,especially in upscaling and integrating plasma reactors with other process units,is the key to addressing critical issues.The review further delves into relevant research in process evaluation and assessment,providing methodological insights and highlighting key factors for comprehensive economic and sustainability analyses.Additionally,recent advancements in novel plasma systems are reviewed,presenting unique advantages and innovative concepts that could reshape the future of process development.This review provides essential information for navigating the path forward,ensuring a comprehensive understanding of challenges and opportunities in the development of plasma-based CCU process.

Process engineering of demineralisation of moderate to high ash Indian coals through NaOH‑HCl leaching and HF leaching

Chemical leaching of coals would be required to produce cleaner coals for some special applications where physical benefi-ciation may not be effective enough.This would also help in recovering Li and rare earth metals besides in the sequestration of CO_(2).About 20 Indian coals having complexly distributed moderate to high ash contents were sequentially treated with various alkali–acid such as NaOH-HCl,HF,HCl,HCl-HF,and NaOH-HCl-HF leaching.This aimed to establish and design the best stepwise sequential process for the highest degree of demineralisation through a chemical leaching process.Kinetics and process intensification studies were carried out.More than 80%demineralisation of Madhaipur and Neemcha coals was observed using the best sequential treatment designed presently.The repeated stepwise treatment of the alkali and the acid was also studied,which was found to significantly enhance the degree of demineralisation of coals.The integrated process of alkali–acid leaching followed by solvent extraction(Organo-refining)and vice versa of the treated coal was also studied for producing cleaner coals.

Waste Minimization Through Process Integration and Multi-objective Optimization

By avoiding or reducing the production of waste, waste minimization is an effective approach to solve the pollution problem in chemical industry. Process integration supported by multi-objective optimization provides a framework for process design or process retrofit by simultaneously optimizing on the aspects of environment and economics. Multi-objective genetic algorithm is applied in this area as the solution approach for the multi-objective optimization problem.

ENTERPRISE INTEGRATION PLATFORM BASED ON SERVICEORIENTED ARCHITECTURE

To achieve information integration, process integration and application integration of enterprise, an enterprise integration platform （EIP） based on service-oriented architecture （SOA） is built. The enterprise integration model depending on encapsulating the business processes as well as the enterprise applications by the neutral and standard web services is presented. The problem how to discover the existed enterprise resources and share them was resolved depending on the mechanism of publishing and discovering the services. The EIP is integrated closely with product lifecycle management （PLM） system so that the process integration as well as orchestration of the business process services is implemented by encapsulating the workflow engine of PLM system. Not only process integration and application integration, but also information integration based on the bill of material （BOM） conversion driven by process are achieved. Finally, an interpretive, qualitative case study on EIP is conducted for this research.

DATA CONTEXT MODEL IN THE PRO-CESS INTEGRATION FRAMEWORK

Process integration is the important aspect of product development process. The recent researches focus on project management, workflow management and process modeling. Based on the analysis of the process, product development process is divided into three levels according to different grains from macroscopy to microcosm. Our research concentrate on the workflow and the free-grained design process. According to the need of representing the data and the relationships among them for process integration, context model is introduced, and its characters are analyzed. The tree-like structure of inheritance among context model＇s classes is illustrated; The relationships of reference among them are also explained. Then, extensible markup language （XML） file is used to depict these classes. A four-tier framework of process integration has been established, in which model-view-controller pattern is designed to realize the separation between context model and its various views. The integration of applications is applied by the encapsulation of enterprise＇s business logic as distributed services. The prototype system for the design of air filter is applied in an institute.

A Full CMOS Integration Including ISFET Microsensors and Interface Circuit for Biochemical Applications

One of today's challenges is the integration of ISFETs in chemical and biochemical Microsystems.This article presents a full integration of ISFET chip containing the ISFET/REFET(reference FET) pair,ISFET/REFET amplifiers,bias current generator,as well as a reference electrode structure,all integrated on the same chip based on CMOS technology.The sensor chip was fabricated in a standard 0.35μm CMOS process(Chartered Semiconductor,Singapore).The extra post processing steps have been developed and added for depositing membranes.Finally,the pH response of the integrated sensor was measured with the interface circuit.

Study of Total Process Energy Integration

The energy utilization consistency method in process integration extracts the key component of process energy utilization, and simplifies the procedure of process analysis and integration. The method allows the conversion of the total process energy integration into a synthesis problem of a pseudo-heat exchanger network. The advantages of using the energy utilization consistency and the pseudo-temperature methods are presented by two examples of integration of large-scale complex processes. The improved genetic algorithm is proved to be an effective tool in the retrofitting procedures.

Recent Developments in the Continuous Processing of Steels

This paper reviews recent developments in the contin- uous processing of steels in Japan.The following items are discussed:continuous casting-direct rolling(CC-DR) process of hot-rolled strip:thermomechanical control process(TMCP)of heavy plates:in—line heat treating pro- cess of rails:direct lead patenting(DLP)process of wire rods;and fully integrated processing line(FIPL)of cold-rolled strip.

Interpreting the dynamic effect of internal heat integration on reactive distillation columns

In this work,the impact of internal heat integration upon process dynamics and controllability by superposing reactive section onto stripping section,relocating feed locations,and redistributing catalyst within the reactive section is explored based on a hypothetical ideal reactive distillation system containing an exothermic reaction:A + BC + D.Steady state operation analysis and closed-loop controllability evaluation are carried out by comparing the process designs with and without the consideration of internal heat integration.For superposing reactive section onto stripping section,favorable effect is aroused due to its low sensitivities to the changes in operating condition.For ascending the lower feed stage,somewhat detrimental effect occurs because of the accompanied adverse internal heat integration and strong sensitivity to the changes in operating condition.For descending the upper feed stage,serious detrimental effect happens because of the introduced adverse internal heat integration and strong sensitivity to the changes in operating condition.For redistributing catalyst in the reactive section,fairly small negative influence is aroused by the sensitivity to the changes in operating condition.When reinforcing internal heat integration with a combinatorial use of these three strategies,the decent of the upper feed stage should be avoided in process development.Although the conclusions are derived based on the hypothetical ideal reactive distillation column studied,they are considered to be of general significance to the design and operation of other reactive distillation columns.

Sequential Ordering Algorithm for Mass Integration: The Case of Direct Recycling

In the last three decades much effort has been devoted in process integration as a way to improve economic and environmental performance of chemical processes. Although the established frameworks have undergone constant refinement toward formulating and solving complicated process integration problems, less attention has been drawn to the problem of sequential applications of mass integration. This work addresses this problem by proposing an algorithm for optimal ordering of the process sinks in direct recycling problems, which is compatible with the typical mass integration formulation. The order consists in selecting the optimal sink at a specific integration step given the selection of the previous steps and the remaining process sources. Such order is identified through a succession of preemptive goal programming problems, namely of optimization problems characterized by more objectives at different priority levels. Indeed, the target for each sink is obtained by maximizing the total flow recycled from the available process sources to this sink and then minimizing the use of pure sources, starting from the purest one;the hierarchy is respected through a succession of linear optimization problems with a single objective function. While the conditional optimality of the algorithm holds always, a thorough statistical analysis including structured to random scenarios of process sources and process sinks shows how frequently the sequential ordering algorithm is outperformed with respect to the total recycled amount by a different selection of process sinks with the same cardinality. Two more case studies proving the usefulness of ordering the process sinks are illustrated. Extensions of the algorithm are also identified to cover more aspects of the process integration framework.

Integrated vacuum pressure swing adsorption and Rectisol process for CO_(2) capture from underground coal gasification syngas

An integrated vacuum pressure swing adsorption(VPSA) and Rectisol process is proposed for CO_(2) capture from underground coal gasification(UCG) syngas. A ten-bed VPSA process with silica gel adsorbent is firstly designed to pre-separate and capture 74.57% CO_(2) with a CO_(2) purity of 98.35% from UCG syngas(CH_(4)/CO/CO_(2)/H_(2)/N_(2)= 30.77%/6.15%/44.10%/18.46%/0.52%, mole fraction, from Shaar Lake Mine Field,Xinjiang Province, China) with a feed pressure of 3.5 MPa. Subsequently, the Rectisol process is constructed to furtherly remove and capture the residual CO_(2)remained in light product gas from the VPSA process using cryogenic methanol(233.15 K, 100%(mass)) as absorbent. A final purified gas with CO_(2) concentration lower than 3% and a regenerated CO_(2) product with CO_(2) purity higher than 95% were achieved by using the Rectisol process. Comparisons indicate that the energy consumption is deceased from 2.143 MJ·kg^(-1) of the single Rectisol process to 1.008 MJ·kg^(-1) of the integrated VPSA & Rectisol process, which demonstrated that the deployed VPSA was an energy conservation process for CO_(2) capture from UCG syngas. Additionally, the high-value gas(e.g., CH_(4)) loss can be decreased and the effects of key operating parameters on the process performances were detailed.

IMC-PID tuning method based on sensitivity specification for process with time-delay

To overcome the deficiencies addressed in the conventional PID control and improve the dynamic performance and robustness of the system, a simple design and parameters tuning approach of internal model control-PID （IMC-PID） controller was proposed for the first order plus time-delay （FOPTD） process and the second order plus time-delay （SOPTD） process. By approximating the time-delay term of the process model with the first-order Taylor series, the expressions for IMC-PID controller parameters were derived, and they had only one adjustable parameter 2 which was directly related to the dynamic performance and robustness of the system. Moreover, an analytical approach of selecting 2 was given based on the maximum sensitivity Ms. Then, the robust tuning of the system could be achieved according to the value of Ms. In addition, the proposed method could be extended to the integrator plus time-delay （IPTD） process and the first order delay integrating （FODI） process. Simulation studies were carried out on various processes with time-delay, and the results show that the proposed method could provide a better dynamic performance of both the set-point tracking and disturbance rejection and robustness against parameters perturbation.

Synthesis and Scheduling of Optimal Batch Water-recycle Networks

This work develops an optimization-based methodology for the design and scheduling of batch water recycle networks. This task requires the identification of network configuration, fresh-water usage, recycle assignments from sources to sinks, wastewater discharge, and a scheduling scheme. A new source-tank-sink representation is developed to allow for storage and dispatch tanks. The problem is solved in stages by first eliminating scheduling constraints and determining minimum usage of fresh water and wastewater discharge. An iterative procedure is formulated to minimize the total annual cost of the system by trading off capital versus operating costs. The work overcomes limitations in previous literature work including restricted recycle within the same cycle, lumped balances that may not lead to feasible solutions, and unrealistic objective functions. A case study is solved to illustrate the usefulness of the devised procedure.

Progress and Prospects of Hydrogen Production: Opportunities and Challenges

This study presents an overview of the current status of hydrogen production in relation to the global requirement for energy and resources.Subsequently,it symmetrically outlines the advantages and disadvantages of various production routes including fossil fuel/biomass conversion,water electrolysis,microbial fermentation,and photocatalysis(PC),in terms of their technologies,economy,energy consumption,and costs.Considering the characteristics of hydrogen energy and the current infrastructure issues,it highlights that onsite production is indispensable and convenient for some special occasions.Finally,it briefly summarizes the current industrialization situation and presents future development and research directions,such as theoretical research strengthening,renewable raw material development,process coupling,and sustainable energy use.

Virtual Reality Based Process Integrated Simulation Platform in Refinery:Virtual Refinery and Its Application

With the combination between system simulation and virtual reality,we have established an integrated virtual refinery simulation platform,and analyzed the overall design and principal architecture.This paper introduces a simulation algorithm about a refinery based on virtual reality,and explains how the algorithm can be applied to the virtual refinery integrated simulation platform in detail.The virtual refinery simulation platform,which consists of a three-dimensional scene system,an integrated database system and a dynamic-static simulation system,has many applications,such as dynamic-static simulation of key process unit used as process control and oil tank blending simulation for scheduling.With the visualization and human-computer interaction for acquiring production and process data,this platform can provide effective supports on staff training related with monitoring,control and operation in refinery.Virtual refinery can also be web published through the internet and it is helpful for the distance training and education.

Global satisfactory control for nonlinear integrator processes with long delay

Integrator processes with long delay are difficult to control. Nonlinear characteristics of actuators make the control problem more challenging. A technique is proposed in this paper for global satisfactory control （GSC） of such processes with relay-type nonlinearity. An oscillatory control signal is injected into the nonlinear process; the amplitude and frequency of the oscillatory signal are designed to linearise the nonlinear process in the sense of harmonic analysis; and a state feedback controller is configured to implement GSC over the linearised process. An illustrative example is given to demonstrate the effectiveness of

Remarkable carbon dioxide catalytic capture (CDCC) leading to solid-form carbon material via a new CVD integrated process (CVD-IP): An alternative route for CO_2 sequestration

Through our newly-developed ＂chemical vapor deposition integrated process （ISVD-IP）＇＂ using carbon OlOXlae （t..u2） as me raw matenal and only carbon source introduced, CO2 could be catalytically activated and converted to a new solid-form product, i.e., carbon nanotubes （CO2-derived） at a quite high yield （the single-pass carbon yield in the solid-form carbon-product produced from CO2 catalytic capture and conversion was more than 30% at a single-pass carbon-base）. For comparison, when only pure carbon dioxide was introduced using the conventional CVD method without integrated process, no solid-form carbon-material product could be formed. In the addition of saturated steam at room temperature in the feed for CVD, there were much more end-opening carbon nano-tubes produced, at a slightly higher carbon yield. These inspiring works opened a remarkable and alternative new approach for carbon dioxide catalytic capture to solid-form product, comparing with that of CO2 sequestration （CCS） or CO2 mineralization （solidification）, etc. As a result, there was much less body volume and almost no greenhouse effect for this solid-form carbon-material than those of primitive carbon dioxide.

Robust PID controller design for time delay processes with peak of maximum sensitivity criteria

The motivation of this work is to obtain single PI/PID tuning formula for different types of processes with enhanced disturbance rejection performance. The proposed tuning formula consistently gives better performance in comparison to several well-known methods at the same degree of robustness for stable, integrating and unstable processes. For the selection of the closed-loop time constant(τc), a guideline is provided over a broad range of time-delay/time-constant ratios on the basis of the peak of maximum sensitivity(Ms). An analysis has been performed for the uncertainty margin with the different process parameters for the robust controller design. It gives the guideline of the Ms-value settings for the PI controller designs based on the process parameters uncertainty. Furthermore, a relationship has been developed between Ms-value and uncertainty margin with the different process parameters(k, τ and θ). Simulation study has been conducted for the broad class of processes and the controllers are tuned to have the same degree of robustness by measuring the maximum sensitivity, Ms, in order to obtain a reasonable comparison.