Production Management Modelling Based on MAS

Modelling based on multi-agent system （MAS） was built for the current production management and process of Shenyang Songyang Paper Cup Co., Ltd. It can transmit the information instantly via order agent （OA）, manager agent （MA）, production agent （PA）, and service agent （SA）, and realize information sharing. The PA is also built on MAS, and it includes two agents, task agent （TA）, and resource agent （RA）. It has been found that the modelling is superior to the old one. It can improve the working flow and production efficiency, and shorten the time of delivery.

Elevation, Slope Aspect and Integrated Nutrient Management Effects on Crop Productivity and Soil Quality in North-west Himalayas, India

On farm bio-resource recycling has been given greater emphasis with the introduction of conservation agriculture specifically withclimate change scenarios in the mid-hills of the north-west Himalaya region（NWHR）. Under this changing scenario, elevation, slope aspect and integrated nutrient management（INM） may affect significantly soil quality and crop productivity. A study was conducted during 2009-2010 to 2010-2011 at the Ashti watershed of NWHR in a rainfed condition to examine the influence of elevation, slope aspect and integrated nutrient management（INM） on soil resource and crop productivity. Two years of farm demonstration trials indicated that crop productivity and soil quality is significantly affected by elevation, slope aspect and INM. Results showed that wheat equivalent yield（WEY） of improved technology increased crop productivity by -20%-37% compared to the conventional system. Intercropping of maize with cowpea and soybean enhanced yield by another 8%-17%. North aspect and higher elevation increased crop productivity by 15%-25% compared to south aspect and low elevation（except paddy）. Intercropping of maize with cowpea and soybean enhanced yield by another 8%-15%. Irrespective of slope, elevation and cropping system, the WEY increased by -30% in this region due to INMtechnology. The influence of elevation, slope aspect and INM significantly affected soil resources（SQI） and soil carbon change（SCC）. SCC is significantly correlated with SQI for conventional（R2 = 0.65＊）, INM technology（R2 = 0.81＊） and for both technologies（R2 = 0.73＊）. It is recommended that at higher elevation.（except for paddy soils） with a north facing slope, INM is recommended for higher crop productivity; conservation of soil resources is recommended for the mid hills of NWHR; and single values of SCC are appropriate as a SQI for this region.

Problems of Production Management in Agile Manufacturing Environment and their Countermeasures

Agile manufacturing is a new production mode. This pa per discusses the four problems of production management in the environment of a gile manufacturing, and some countermeasures are advanced: (1) Organization of production. Traditional MTO production or MTS production ca n not meet the requirement of agile manufacturing which request both high produc tivity and the manufacturing flexibility. For this, the paper advances best way is to use the production organization mode of MCP (Mass Customization Production ),and some strategies of MCP are discussed. (2) Production planning. The requirement of agile manufacturing to production pl anning embodies in two facets: synchronization and flexibility. The paper su ggests that the structure and function of MRPII system should be improved in ord er to meet the demand of agile manufacturing. (3) Production control. The problem of production control is how to reduce the u ncertainty of hand over time between enterprises and increase the production syn chronization level. The paper advances some research direction on improving production ability. (4) Quality control. The problems of quality management are how to transfer the information of customer’s quality requirement between different organizations an d how to keep the consistency and stability of quality. Some countermeasures are advanced. In the end of the paper, one case advanced administrates how to utilize the thou ghts of agile manufacturing to upgrade the competition ability.

Research on coal mine safety production management decision system based on VB

Based on safety management appraisal theory, the decision system was divided into 5 function menu module, including system control module, mining coal and the tunneling working surface security evaluation module, the entire ore safety production condition appraisal module, the safety management level appraisal module of main production work area, the withdrawal system module and so on. The system operates through the constitutive procedure, outputs the main operation results by graph and form, and realizes the main function of safety evaluation.

Statecharts for Distributed Product Data Management System Modelling

Product data management (PDM) has been accepted as an important tool for the manufacturing industries. In recent years, more and mor e researches have been conducted in the development of PDM. Their research area s include system design, integration of object-oriented technology, data distri bution, collaborative and distributed manufacturing working environment, secur ity, and web-based integration. However, there are limitations on their rese arches. In particular, they cannot cater for PDM in distributed manufacturing e nvironment. This is especially true in South China, where many Hong Kong (HK) ma nufacturers have moved their production plants to different locations in Pearl R iver Delta for cost reduction. However, they retain their main offices in HK. Development of PDM system is inherently complex. Product related data cover prod uct name, product part number (product identification), drawings, material speci fications, dimension requirement, quality specification, test result, log size, production schedules, product data version and date of release, special tooling (e.g. jig and fixture), mould design, project engineering in charge, cost spread sheets, while process data includes engineering release, engineering change info rmation management, and other workflow related to the process information. Accor ding to Cornelissen et al., the contemporary PDM system should contains manageme nt functions in structure, retrieval, release, change, and workflow. In system design, development and implementation, a formal specification is nece ssary. However, there is no formal representation model for PDM system. Theref ore a graphical representation model is constructed to express the various scena rios of interactions between users and the PDM system. Statechart is then used to model the operations of PDM system, Fig.1. Statechart model bridges the curr ent gap between requirements, scenarios, and the initial design specifications o f PDM system. After properly analyzing the PDM system, a new distributed PDM (DPDM) system is proposed. Both graphical representation and statechart models are constructed f or the new DPDM system, Fig.2. New product data of DPDM and new system function s are then investigated to support product information flow in the new distribut ed environment. It is found that statecharts allow formal representations to capture the informa tion and control flows of both PDM and DPDM. In particular, statechart offers a dditional expressive power, when compared to conventional state transition diagr am, in terms of hierarchy, concurrency, history, and timing for DPDM behavioral modeling.

Application of MES System in Offshore Oil and Gas Field Production Management

In order to solve information island problem of offshore oil and gas field production-related information system,including repetitive reporting and input of data,data isolation of central control system,inadequate follow-up analysis and development to support oil and gas field production management,and so on.Therefore,the introduction of MES(Manufacturing Execution System)production execution system in the manufacturing industry and downstream production of offshore oil has become an inevitable choice.This system utilizes the real-time database combined with relational database to collect the scattered structured data,such as the production process real-time data,production management documents and statistical tables of offshore oil and gas production facilities.It establishes a unified data center platform for each operation area and production site,so as to centralize the related production management data at production sites.This system realizes many functions,including the production management support like production report generation as well as presentation and POB,equipment management support like PM optimization,remote configuration and monitoring of production operation,status trend analysis,and production event prediction.The implementation of MES system in offshore oil and gas field production management perfects the overall information system of China National Offshore Oil Corporation more and gradually enhances its comprehensive benefits.

Establishment of Person and Enterprise Process Model in Product Data Management System

Before the implementation of product data management (PDM) system, person model and enterprise process model (EPM) must be firstly established. For the convenience of project management, all the related users must be allocated to the “Person User Role Group” net. Based on the person model and the direction of information flow, the EPM is established subsequently. The EPM consists of several release levels, in which the access controls are defined. The EPM procedure shows the blueprint of the workflow process structure. The establishment of person model and EPM in an enterprise has been instanced at the end of this paper.

Development of Pull Strategies in Production Management in Order to Increase Efficiency of Manufacturing Enterprise

The article deals with possible approaches to the management of manufacturing organizations. The authors emphasize the need for integration of lean management with eco-innovation. This integration represents a sustainable development so that environmental impacts are reduced, more effective use of natural resources is achieved and production costs are reduced. Manufacturing organizations based on that approach must use so-called pull production control systems. Pull systems are most often presented in production management system--Kanban. This article also deals with specification of these systems and the development of pull strategies in production management in order to increase efficiency of manufacturing enterprise.

The Production Management Improvement Model of Small and Medium-sized Permanent Magnetic Materials Manufacturing Companies

An integrated production planning and control model based on MRPⅡand JIT is put forward through analyzing the characteristics of magnetic materials manufacturing companies. Master Production Schedule with limited capacity and operational plan in workshop level based on the basic data of flow chart are formulated by this model which applied JIT idea and based on customer order demand. Push production is adapted during execution phase combined with process flow cards. The model is helpful to reduce inventory,keep certain flexbility of production and improve continuity and equilibrium of manufacturing process.

Research on the Influencing Factors of Purchasing Internet Financial Wealth Management Products Based on AHP

Internet financial wealth management product(IFWMP)has recently been one of the most gained popularity.There are limited quantitative research on IFWMP which can help customers to choose products based on the significance of each factor.In this paper,a multi-criteria decision-making model for IFWMP was developed,namely the analytic hierarchy process(AHP)which is commonly used to make decisions for unstructured problems through quantifying weights of each criterion.This paper investigated ten influential factors relevant to the purchase of IFWMP and analyzed the frequency of collected response to show the significance of the factors.Based on the quantified weights,the results of the research indicated that compatibility,product liquidity,perceived ease of use,and perceived usefulness affected investors purchasing behaviors and that every investor should pay great attention to.

Research on the Influencing Factors of Purchasing Internet Financial Wealth Management Products based on AHP

Internet financial wealth management product(IFWMP)has recently been one of the most popularity.There is limited quantitative research on IFWMP which can helps customers to choose the products based on the significance of each factor.In the paper,a multi-criteria decision-making model of IFWMP was developed,namely analytic hierarchy process(AHP)which is used to make decisions to the unstructured problems through quantifying weights of each criterion.This paper investigated ten influential factors relevant to the purchase of IFWMP and analyzed the frequency of collected responds to show the significance of factors.Based on the quantified weights,the result of the research indicated that compatibility,product liquidity,perceived ease of use and perceived usefulness affect the investors purchasing behaviors most that every investors should pay great attention to.

Research and Implementation of Task Management Model in Product Development Process Management

The implementation of product development process management (PDPM) is an effective means of developing products with higher quality in shorter lead time. It is argued in this paper that product, data, person and activity are basic factors in PDPM With detailed analysis of these basic factors and their relations in product developmed process, all product development activities are considered as tasks and the management of product development process is regarded as the management of task execution A task decomposition based product development model is proposed with methods of constructing task relation matrix from layer model and constraint model resulted from task decomposition. An algorithm for constructing directed task graph is given and is used in the management of tasks. Finally, the usage and limitation of the proposed PDPM model is given with further work proposed.

Research on Concurrent Engineering Oriented Integrated Product Development Process Management System

In concurrent engineering, effective process management is the key to improve the efficiency and quality of product development. Although in project management system, workflow management system and PDM system, process management functions are provided, they can not meet the needs of product development. In this paper, we integrate the project management, workflow management and product management technique together and a concurrent engineering oriented integrated product development process management system is proposed. The system structure, integrated product development model and running method are introduced. The practice proves this system is powerful in supporting product development process.

Product Data Management Implementation

On the basis of PDM(product data management) definition and its connotation, the factors to ensure implementation success are analyzed. The definition phase, analysis phase, design phase, build and test phase, and post production phase during PDM implementation are described. The implementation is divided into ten processes, which consist of the above different phases. The relationships between phases and processes are illustrated. Finally, a workflow is proposed to guide the implementing at a fixed price.

A product module mining method for PLM database

Modular technology can effectively support the rapid design of products, and it is one of the key technologies to realize mass customization design. With the application of product lifecycle management(PLM) system in enterprises, the product lifecycle data have been effectively managed. However, these data have not been fully utilized in module division, especially for complex machinery products. To solve this problem, a product module mining method for the PLM database is proposed to improve the effect of module division. Firstly, product data are extracted from the PLM database by data extraction algorithm. Then, data normalization and structure logical inspection are used to preprocess the extracted defective data. The preprocessed product data are analyzed and expressed in a matrix for module mining. Finally, the fuzzy c-means clustering(FCM) algorithm is used to generate product modules, which are stored in product module library after module marking and post-processing. The feasibility and effectiveness of the proposed method are verified by a case study of high pressure valve.

Research on the J2EE-based product database management system

The basic frame and the design idea of J2EE-based Product Data Management (PDM) system are presented. This paper adopts the technology of Object-Oriented to realize the database design and builds the information model of this PDM system. The integration key technology of PDM and CAD systems are discussed, the isomerous interface characteristics between CAD and PDM systems are analyzed, and finally, the integration mode of the PDM and CAD systems is given. Using these technologies, the integration of PDM and CAD systems is realized and the consistence of data in PDM and CAD systems is kept. Finally, the Product Data Management system is developed, which has been tested on development process of the hydraulic generator. The running process is stable and safety.

System Approach to the Integration of Military and Civilian Productions in China

The author uses system analysis to provide system thinkings of the deepening reform of the management of defence science, technology and industry (DSTI) and investigate the system definition of DSTI, the system reform target, system operational mechanism, institutional structure, coordination and control functions and the orientation of conversion in China.

The effects of aeration and irrigation regimes on soil CO_2 and N_2O emissions in a greenhouse tomato production system

Aerated irrigation has been proven to increase crop production and quality, but studies on its environmental impacts are sparse. The effects of aeration and irrigation regimes on soil CO2 and N2O emissions in two consecutive greenhouse tomato rotation cycles in Northwest China were studied via the static closed chamber and gas chromatography technique. Four treatments, aerated deficit irrigation（AI1）, non-aerated deficit irrigation（CK1）, aerated full irrigation（AI2） and non-aerated full irrigation（CK2）, were performed. The results showed that the tomato yield under aeration of each irrigation regime increased by 18.8% on average compared to non-aeration, and the difference was significant under full irrigation（P〈0.05）. Full irrigation significantly increased the tomato yield by 23.9% on average in comparison to deficit irrigation. Moreover, aeration increased the cumulative CO2 emissions compared to non-aeration, and treatment effects were significant in the autumn-winter season（P〈0.05）. A slight increase of CO2 emissions in the two seasons was observed under full irrigation（P〉0.05）. There was no significant difference between aeration and non-aeration in soil N2O emissions in the spring-summer season, whereas aeration enhanced N2O emissions significantly in the autumn-winter season. Furthermore, full irrigation over the two seasons greatly increased soil N2O emissions compared to the deficit irrigation treatment（P〈0.05）. Correlation analysis indicated that soil temperature was the primary factor influencing CO2 fluxes. Soil temperature, soil moisture and NO3^- were the primary factors influencing N2O fluxes. Irrigation coupled with particular soil aeration practices may allow for a balance between crop production yield and greenhouse gas mitigation in greenhouse vegetable fields.

Engineering Change Management Adaptive to PLM

Engineering Change (EC) management for a Product Lifecycle Management (PLM) system, including EC data model, EC evaluation and EC implementation is presented. A method of dynamic and parallel EC evaluation is proposed, which breaks an EC evaluation task into several subtasks. Such subtasks can be dynamically and simultaneously proceeded, disassembled and communicated by different specialists, and at the same time a set of EC objects is created. This approach provides flexible and effective evaluation of the EC. The EC implementation followed will further ensure the completeness and consistency of EC data.

RESEARCH ON PRODUCT INNOVATION DESIGN IN VIRTUAL PRODUCT DEVELOPMENT

An integrated template of virtual product development alters primarilysequential tradition mode of product life cycle. The template integrates all processes of productdevelopment using digital modem. An environment of virtual product development provides productdevelopment environment of integration, communion, network, concurrent and collaboration. Combiningdevelopment of new rapier loom, an innovated design process is researched in virtual productdevelopment, which consists three portions: constructing an integration development environment,innovation design and manufacturing simulation. The innovated design process realizes reversedesign, mechanism concept design, structural design and analysis, performance analysis andmanufacturing process simulation of virtual product, which can enhance greatly product performanceand reduce cost and development cycle of new product.