Expressions for Entropy Production Rate of Fuel Cells

On the basis of a general model of fuel cells, the entropy production rates of a fuel cell system under different conditions are derived by using theories of electrochemistry and thermodynamics. In order to analyze the influence of the irreversible losses existing in an actual fuel cell, the equivalent circuit of the fuel cell is introduced, so that the irreversible factor of the fuel cell may be determined directly as a function of the internal, leak and load resistances. Moreover, the maximum power output and efficiency of the fuel cell are calculated, the optimal operation of the fuel cell is discussed, and the matching condition of the load resistance is determined.

Measuring Scientific Productivity in China Using Malmquist Productivity Index

Purpose: This paper aims to investigate the scientific productivity of China's science system. Design/methodology/approach: This paper employs the Malmquist productivity index(MPI) based on Data Envelopment Analysis(DEA).Findings: The results reveal that the overall efficiency of Chinese universities increased significantly from 2009 to 2016, which is mainly driven by technological progress. From the perspective of the functions of higher education, research and transfer activities perform better than the teaching activities.Research limitations: As an implication, the indicator selection mechanism, investigation period and the MPI model can be further extended in the future research.Practical implications: The results indicate that Chinese education administrative departments should take actions to guide and promote the teaching activities and formulate reasonable resource allocation regulations to reach the balanced development in Chinese universities.Originality/value: This paper selects 58 Chinese universities and conducts a quantified measurement during the period 2009–2016. Three main functional activities of universities(i.e. teaching, researching, and application) are innovatively categorized into different schemes, and we calculate their performance, respectively.

ENTROPY PRODUCTION RATE OF THE MINIMAL DIFFUSION PROCESS

The entropy production rate of stationary minimal diffusion processes with smooth coefficients is calculated. As a byproduct, the continuity of paths of the minimal diffusion processes is discussed, and that the point at infinity is absorbing is proved.

Entropy Production Rate Changes in Lysogeny/Lysis Switch Regulation of Bacteriophage Lambda

According to the chemical kinetic model of lysogeny/lysis switch in Escherichia coli （E. coil） infected by bacteriophage A, the entropy production rates of steady states are calculated. The resuits show that the lysogenic state has lower entropy production rate than lyric state, which provides an explanation on why the lysogenic state of A phage is so stable. We a/so notice that the entropy production rates of both lysogenic state and lyric state are lower than that of saddle-point and bifurcation state, which is consistent with the principle of minimum entropy production for living organism in nonequilibrium stationary state. Subsequently, the relations between CI and Cro degradation rates at two bifurcations and the changes of entropy production rate with CI and Cro degradation are deduced. The theory and method can be used to calculate entropy change in other molecular network.

Carbon biomass,production rates and export flux of copepods fecal pellets in the Changjiang(Yangtze) River estuary

Copepod fecal pellets are ubiquitous throughout the oceans. Their production and export can represent a highly efficient pathway of carbon export. However, the role these fecal pellets play in carbon export in the Changjiang(Yangtze) River estuary is not well known. Two cruises were carried out in the Changjiang estuary in the spring and summer of 2013, during which time carbon biomass, production, and export of copepod fecal pellets were studied. Spring and summer fecal pellet carbon biomass ranged 0.30–1.01 mg C/m^3(mean=0.56±0.20 mg C/m^3) and 0.31–1.18 mg C/m^3(mean=0.64±0.24 mg C/m^3), respectively, significantly lower than phytoplankton. At most stations, fecal pellet carbon biomass was higher in surface or subsurface layers than deeper layers. Production rates ranged 0.65–1.49 pellets/(ind.?h)(mean=1.02±0.27 pellets/(ind.?h)) in spring and 0.62–1.34 pellets/(ind.?h)(mean=0.98±0.22 pellets/(ind.?h)) in summer, within the range reported in previous studies. Higher production rates of fecal pellets occurred at stations with higher chlorophyll a concentrations, and production rates of copepods of size 500–1 000 μm greater than copepods >1 000 μm during both cruises. The potential export flux of fecal pellets was slightly higher in summer(mean=68.95±14.37 mg C/(m^2 ?d)) than spring(mean=52.08±11.33 mg C/(m^2 ?d)) owing to higher summer copepod abundances. To our knowledge, this study is the first of its kind in the Changjiang estuary, and it confirms the significant role of copepod fecal pellets in local carbon export.

A comparative analysis of Japanese firm productivity： Solow residual and Malmquist productivity index

For some time, two major kinds of Total Factor Productivity （TFP） have existed independently of each other： the Solow residual and the Malmquist Productivity Index （MPI）. The Solow residual was introduced in macro economic growth models, and the MPI has been used in micro economics and management studies. As both indices were developed independently, few studies utilize both together and compare the results. This paper uses the same data to compare the two productivity indices by setting to determine the economic implications of combining the two indices. We discovered that we could decompose TFP with each aspect of the Soiow residual and MPI. We could then interpret their relationship in the business cycle. Our results indicated that the frontier shift in MPI of Japanese firms often occurred when the Solow residual increased, meaning that improving oroductivitv with the Solow residual could be generated by a firm that could shift new production frontiers.

Overall profit Malmquist productivity index under data uncertainty

The calculation of the overall profit Malmquist productivity index(MPI)requires precise and accurate information on the input,output,input-output prices of each decision making unit(DMU).However,in many situations,some inputs and/or outputs and input-output prices are imprecise.As such,we consider the overall profit MPI problem when the input,output,and input-output prices are imprecise and vary over intervals,showing that method(MCM 54:2827–2838,2011)has some shortfalls.To remedy these shortfalls,we propose another method for measuring the overall profit MPI when the inputs,outputs,and price vectors vary over intervals.That is,to calculate the overall profit efficiency intervals,cone-ratio data envelopment analysis models can be applied to the incorporated information as weight restrictions.Further,we provide a new approach to calculating the upper bound of the overall profit efficiency of each DMU.A numerical example is provided for illustrating the proposed method.

A Production Inventory Model of Constant Production Rate and Demand of Level Dependent Linear Trend

The proposed model considers the products with finite shelf-life which causes a small amount of decay. The market demand is assumed to be level dependent and in a linear form. The model has also considered the constant production rate which stops attaining a desired level of inventories and that is the highest level of inventories. Production starts with a buffer stock and without any sort of backlogs. Due to the market demand and product’s decay, the inventory reduces to the level of buffer stock where again the production cycle starts. With a numerical search procedure the proof of the proposed model has been shown. The objective of the model is to obtain the total average optimum inventory cost and optimum ordering cycle.

Estimating the Three-Stage Cost Malmquist Productivity Index in the Taiwan Biotech and Biopharmaceutical Industry

This paper estimates and decomposes the output-oriented three-stage cost Malmquist productivity index of the Taiwan Residents biotech and biopharmaceutical （B＆BP） industry in 2004-2007 periods. The empirical estimations proceed in three stages. Following the methodology of Yang and Huang （2009） with the assumption of variable return to scale （VRS） in the first stage, the original cost Malmquist productivity index （CM） is decomposed into five sources of productivity change： pure technical efficiency change, technical change, allocative efficiency change （AEC）, input-price effect, and cost scale efficiency change. The method of Yang and Huang （2009） is an excellent contribution, but it did not deal with the exogenous environmental variables and noises. In the second stage, the original input variables are adjusted by the exogenous environmental variables. Finally, adjusted input variables produced by the second stage are reused for obtaining the reality of CM in the third stage.

Entropy Production Rate for Avascular Tumor Growth

The entropy production rate was determined for avascular tumor growth. The proposed formula relates the fractal dimension of the tumor contour with the quotient between mitosis and apoptosis rate, which can be used to characterize the degree of proliferation of tumor cells. The entropy production rate was determined for fourteen tumor cell lines as a physical function of cancer robustness. The entropy production rate is a hallmark that allows us the possibility of prognosis of tumor proliferation and invasion capacities, key fac-tors to improve cancer therapy.

Composite materials for primary aircraft structures:from development phase to high volume production rate

From 1980’s decade,the introduction of carbon composite materials in structural applications has been consistently increased in the successive generations of civil aircraft from Single Aisle to Middle-long Range to achieve a culminant point with more than 50%in structure weight in recent commercial civil aircraft.This evolution,done through successive iterations,has been possible by combining in the same time the improvement of intrinsic composite material performances and its transformation into prepreg production technologies together with the development of new manufacturing process for material lay-up automation at composite shop-floor manufacturer of aircraft composite parts.New challenges are still coming to continuously develop materials and technologies in order to pursue the production more cost-effective composite parts.Associated to higher aircraft production rate for single aisle,new challenges may force material and aircraft designers and producers to furthermore drive new products and processes introduction and new ways of transformation within in next decade of composite aircraft designs.We propose to illustrate these trends using past and recent developments and our return of experience from Hexcel on Civil Aircraft programs.

Heat Production Rate Calculation of Thermal Manikin with a Compensation Method

Thermal manikin plays important roles in simulating thethermal state of human bodies to facilitate the evaluationof thermal comfort properties of various clothing assem-blies.Based on the heat balance principle and analysis ofrelated factors,the heat production rate of manikin isrecommended as an efficient evaluation index.Whereas,its inside heat production which occurs as a result of theexistence of temperature difference between its insidepart and outside surface,should not be ignored.Through a series of theoretical analysis and calculations,a compensative equation is deduced in this paper.

Productivity Growth in the Transportation Industries in the United States: An Application of the DEA Malmquist Productivity Index

This study reviews productivity growth in the five major transportation industries in the United States (airline, truck, rail, pipeline, and water) and the pooled transportation industry from 2004 to 2011. We measure the average productivity for these eight years by state in each transportation industry and the annual average productivity by transportation industry. The major findings are that the U.S. transportation industry shows strong and positive productivity growth except that in the years of the global financial crisis in 2007, 2008, and 2010, and among the five transportation industries, the rail and water sectors show the highest productivity growth in 2011.

Assessing economic performance of the three major urban agglomerations in China by using Malmquist productivity index

Forty years of reform and opening up,China has become to the world’s second-largest economy with great success.However,it is an undoubted actuality that the economic mode of Chinese development is still at the extensive stage.China’s economy has shifted from a high-speed growth phase to a high-quality development phase.In this study,we analyzed three major urban agglomerations’total factor productivity index dynamically by means of Malmquist productivity i?ndex method.The results showed that MPI of Beijing-Tianjin-Hebei urban agglomeration was the highest,as the reasons of the effectiveness of dual-wheel driving both the technology progress and the cluster scale.The mean of MPI of Yangtze River Delta urban agglomeration was fallen into decline by an average of 1.3%annually due to the rate of increase of the size of the cluster towards to optimal frontier was inferior to the relative risk reduction of technology progress.Pearl River Delta urban agglomeration MPI declined by an average of 2.2%annually as a result of the contribution of technology progress reducing.The study of the economic performance of three major urban agglomerations provides a theoretical basis and important practical value for urban development of high quality optimization.

THE BROAD-BAND CCD PHOTOMETRY AND DUST PRODUCTION RATES OF COMET HALE-BOPP

Based upon broad-band CCD observation data of comet Hale-Bopp obtained by a 60cm telescope at Xinglong Station of Beijing Astronomical Observatory during March-August, 1996, the photometric results of comet Hale-Bopp are reported. Using the photometric results, the dust production rate, radius and mass of nucleus of comet Hale-Bopp are estimated as follows: dM/dt～1.5×10 5 kgs -1, R n～35.5km, and M n～5.65×10 16kg.

Productivity change of national health systems in the WHO Eastern Mediterranean region:application of DEA-based Malmquist productivity index

Background:The pursuit of efficiency and productivity is one of the goals of health systems.In the era of Sustainable Development Goals and particularly the move towards universal health coverage,it is imperative to curb wastage of resources to ensure sustainable access of the population to needed and effective health services without enduring financial hardship.This study aims to assess total factor productivity change of national health systems of 20 countries in the WHO’s Eastern Mediterranean Region.Methods:Data Envelopment Analysis(DEA)-based Malmquist index is used to assess total factor productivity change and its components-efficiency change and technical change.To assess the robustness of the Malmquist index estimates,bootstrapping was performed.Outputs used are life expectancy at birth for both sexes and infant mortality;while total expenditure on health per capita in international dollars(PPP)is used as a measure of input.Panel data for the period 2003-2014 was extracted from databases of the WHO and the World Bank.Results:In all but five countries covered in the study,a decline in the mean total factor productivity is observed during the period 2003-2014.The decline is driven by technical regress.In all countries,the technical change component of the Malmquist TFP index is less than unity(range:0.896 to 0.945).All countries exhibited growth in efficiency(efficiency change exceeding one)except two countries(Djibouti and Iraq).The growth in efficiency was mainly due to change in scale efficiency.Overall,total factor productivity in the region declined by 3.8%.This was due to a 9.1%decline in technical change,which overshadowed the 5.8%increase in efficiency.Three countries-Libya,Qatar and Yemen-showed a marginal growth in total factor productivity.There was no change in total factor productivity in Kuwait and Lebanon.Conclusion:The decline in total factor productivity over the study period is likely to hamper achieving the targets of Sustainable Development Goal 3 of ensuring healthy lives and promoting well-being for all at all ages.It is recommended that country-level studies on efficiency and productivity of health systems be conducted in order to intensively examine the determinants of inefficiency and productivity decline and implement appropriate interventions that could enhance efficiency and productivity.

Gas-Water Production of a Continental Tight-Sandstone Gas Reservoir under Different Fracturing Conditions

A numerical model of hydraulic fracture propagation is introduced for a representative reservoir(Yuanba continental tight sandstone gas reservoir in Northeast Sichuan).Different parameters are considered,i.e.,the interlayer stress difference,the fracturing discharge rate and the fracturing fluid viscosity.The results show that these factors affect the gas and water production by influencing the fracture size.The interlayer stress difference can effectively control the fracture height.The greater the stress difference,the smaller the dimensionless reconstruction volume of the reservoir,while the flowback rate and gas production are lower.A large displacement fracturing construction increases the fracture-forming efficiency and expands the fracture size.The larger the displacement of fracturing construction,the larger the dimensionless reconstruction volume of the reservoir,and the higher the fracture-forming efficiency of fracturing fluid,the flowback rate,and the gas production.Low viscosity fracturing fluid is suitable for long fractures,while high viscosity fracturing fluid is suitable for wide fractures.With an increase in the fracturing fluid viscosity,the dimensionless reconstruction volume and flowback rate of the reservoir display a non-monotonic behavior,however,their changes are relatively small.

The Correlation between the Power Quality Indicators and Entropy Production Characteristics of Wind Power+Energy Storage Systems

Power quality improvements help guide and solve the problems of inefficient energy production and unstable power output in wind power systems.The purpose of this paper is mainly to explore the influence of different energy storage batteries on various power quality indicators by adding different energy storage devices to the simulated wind power system,and to explore the correlation between systementropy generation and various indicators,so as to provide a theoretical basis for directly improving power quality by reducing loss.A steady-state experiment was performed by replacing the wind wheel with an electric motor,and the output power qualities of the wind power systemwith andwithout energy storagewere compared and analyzed.Moreover,the improvement effect of different energy storage devices on various indicatorswas obtained.Then,based on the entropy theory,the loss of the internal components of the wind power system generator is simulated and explored by Ansys software.Through the analysis of power quality evaluation indicators,such as current harmonic distortion rate,frequency deviation rate,and voltage fluctuation,the correlation between entropy production and each evaluation indicator was explored to investigate effective methods to improve power quality by reducing entropy production.The results showed that the current harmonic distortion rate,voltage fluctuation,voltage deviation,and system entropy production are positively correlated in the tests and that the power factor is negatively correlated with system entropy production.In the frequency range,the frequency deviationwas not significantly correlated with the systementropy production.

Production Chain Length and PPI-CPI Divergence:Analysis Based on the Global Input-output Price Model

Productivity and international energy price shocks are reflected in PPI and CPI via industrial chains.China’s in-depth participation into the global value chains has increasingly lengthened its industrial production chains.The question is how the changing length of production chains will affect CPI and PPI,as well as CPI-PPI correlation?By constructing a global input-output price model,this paper offers a theoretical discussion on the impact of production chain length on the CPI-PPI divergence.Our findings suggest that the price shock of international bulk commodities has a greater impact on China’s PPI than that on CPI.The effects on both China’s PPI and CPI estimated by using the single-country input-output model are higher than the results estimated with the global input-output model.However,the difference between CPI and PPI variations estimated with the global input-output model is greater than the result estimated with the single-country input-output model,which supports the view that the lengthening of production chains,especially international production chains,leads to a divergence between CPI and PPI.Empirical results based on cross-national panel data also suggest that the lengthening of production chains has reduced the CPI-PPI correlation for countries,i.e.the lengthening of production chains has increased the PPI-CPI divergence.That is to say,policymakers should target not just CPI in maintaining price stability,but instead focus on the stability of both PPI and CPI.Efforts can be made to proactively adjust the price index system,and formulate the industrial chain price index.

Impact of Different Rates of Nitrogen Supplementation on Soil PhysicochemicalProperties and Microbial Diversity in Goji Berry

Goji berry(Lycium barbarum L.)is substantially dependent on nitrogen fertilizer application,which can signifi-cantly enhance fruit yield and Goji berry industrial development in Ningxia,China.This study aimed to analyze the functions of differential nitrogen application rates including low(N1),medium(N2),and high(N3)levels in soil microbial community structure(bacterial and fungal)at 2 diverse soil depths(0-20,20-40 cm)through high-throughput sequencing technology by targeting 16S RNA gene and ITS1&ITS2 regions.All the observed physicochemical parameters exhibited significant improvement(p<0.05)with increased levels of nitrogen and the highest values for most parameters were observed at N2.However,pH decreased(p<0.05)gradually.The alpha and beta diversity analyses for bacterial and fungal communities’metagenome displayed more similarities than differences among all groups.The top bacterial and fungal phyla and genera suggested no obvious(p>0.05)differences among three group treatments(N1,N2,and N3).Furthermore,the functional enrichment analysis demonstrated significant(p<0.05)enrichment of quorum sensing,cysteine and methionine metabolism,and transcriptional machinery for bacterial communities,while various saprotrophic functional roles for fungal communities.Conclusively,moderately reducing the use of N-supplemented fertilizers is conducive to increasing soil nitrogen utilization rate,which can contribute to sustainable agriculture practices through improved soil quality,and microbial community structure and functions.