A new production component method for natural gas development planning

Based on an analysis of the limitations of conventional production component methods for natural gas development planning,this study proposes a new one that uses life cycle models for the trend fitting and prediction of production.In this new method,the annual production of old and new wells is predicted by year first and then is summed up to yield the production for the planning period.It shows that the changes in the production of old wells in old blocks can be fitted and predicted using the vapor pressure model(VPM),with precision of 80%e95%,which is 6.6%e13.2%higher than that of other life cycle models.Furthermore,a new production prediction process and method for new wells have been established based on this life cycle model to predict the production of medium-to-shallow gas reservoirs in western Sichuan Basin,with predication error of production rate in 2021 and 2022 being 6%and 3%respectively.The new method can be used to guide the medium-and long-term planning or annual scheme preparation for gas development.It is also applicable to planning for large single gas blocks that require continuous infill drilling and adjustment to improve gas recovery.

The coalbed methane production potential method for optimization of wells location selection

A gas production potential method for optimization of gas wellsite locations selection is proposed in terms of the coalbed gas resources volume and the recoverability. The method uses the actual data about reservoirs in a coalbed gas field in central China to optimize wellsite locations in the studied area in combination with the dynamic data about actual production in the coalbed gas field, selects a favorable subarea for gas wells deployment. The method is established based on the basic properties of coal reservoirs, in combination with the coalbed thickness and the gas content to make an analysis of the gas storage potential of a coal reservoir, as well as resources volume and the permeability of a coal reservoir. This method can be popularized for optimization of wellsite locations in other methane gas development areas or blocks.

COMPLEX INNER PRODUCT AVERAGING METHOD FOR CALCULATING NORMAL FORM OF ODE

This paper puts forward a complex inner product averaging method for calculating normal form of ODE. Compared with conventional averaging method, the theoretic analytical process has such simple forms as to realize computer program easily. Results can be applied in both autonomous and non-autonomous systems. At last, an example is resolved to verify the method.

LOCAL SALINE APPROXIMATION METHODS FOR SINGULAR PRODUCT INTEGRATION

The purpose of this paper is to propose and study local spline approximation methods for singular product integration,for which;i)the precision degree is the highest possible using splint approximation; ii) the nodes fan be assumed equal to arbitrary points,where the integrand function f is known; iii) the number of the requested evaluations of f at the nodes is low,iv) a satisfactory convergence theory can be proved.

Geographical Indication Characteristics,Unique Production Methods and Industrial Development Measures of Zhuanbu Strawberry

This article describes the geographical indication characteristics of Zhuanbu strawberry,a special product of Yinan County,Shandong Province,a national geographical indication agricultural product,including specific production area,unique production environment,rich human history and unique product quality,summarizes the unique production method of Zhuanbu strawberry from selection of production area and varieties,production management,timely harvesting and other aspects,and puts forward corresponding industrial development measures,in order to maintain the brand of Zhuanbu strawberry to the greatest extent and further improve the brand awareness and market competitiveness of Zhuanbu strawberry.

Design Method of Cultural Derivative Products of Museums from the Perspective of Regional Culture

To perfect innovative design of cultural derivative products of museums,promote the dissemination of museum collection culture,and enhance product connotation and cultural value,based on the research on regional culture,the relationship between regional culture and cultural derivative products of museums is analyzed,and design method of cultural derivative products of museums is summarized.

Chemical Analysis Method for Carbon Bearing Refractory Products——Determination of the Total Carbon by Combustion Gravimetric Method

GB/T 13245-91 1 Theme and Scope This standard specifies the method abstract, reagents, apparatus, specimen, analyzing procedure, result calculation and permissible tolerance used for determination of the total carbon with combustion gravimetric method.

Chemical Analysis Method for Carbon Bearing Refractory Products——Determination of Magnesium Oxide Content by CyDTA Volumetric Method

This standard specifies the method summary, reagents, apparatus, sampling, procedure, test results calculation and permissible tolerance of the determination of magnesium oxide by CyDTA volumetric method.

Test Method for Refractoriness Under Load of Refractory Products(Non-differential,with Rising Temperature)

This standard specifies the definitions, theory, apparatus, specimens, procedures, test results and disposal, test error and report of test method for refractoriness under load of refractory products （non-differential, with rising temperature）.

Food Safety Detection Methods Applied to National Special Rectification of Product Quality and Food Safety

Afour-month period of national special rectification for product quality and food safety officially started on August 25, and was focused on eight fields, including those of agricultural products and processed foods.……

Properties and Applications of Bamboo Fiber—A Current-State-of-the Art

Fibers are used in many forms in engineering applications–one of the most common being used as reinforcement.Due to its renewable short natural growth cycle and abundance of bamboo resources,bamboo fiber has attracted attention over other natural fibers.Bamboo fiber has a complex natural structure but offers excellent mechanical properties,which are utilized in the textile,papermaking,construction,and composites industry.However,bam-boo fibers can easily absorb moisture and are prone to corrosion limiting their use in engineering applications.Therefore,a better understanding of bamboo fiber is particularly important.This paper reviews all existing research on the mechanical characterization of bamboo fiber with an emphasis on the extraction and treatment techniques,and their effect on relevant properties.The chemical composition of bamboo fibers has also been thoroughly investigated and presented herein.Current applications and future opportunities for bamboo fibers in various fields have been presented with a focus on research needs.This work can serve as a reference for future research on bamboo fiber.

Overload type and optimization of meadow carrying capacity in Maqin County in the Three-River Source Region,China

Alpine meadows,comprising the main ecosystem of the Three-River Source Region,play an important role in the economic development of western pastoral areas.To determine whether the grazing level was too intense or the nutrient-carrying capacity of the meadows was overloaded,and to offer solutions in Maqin County,Qinghai Province,China,the meadows carrying capacity was determined by combining grass-yield and nutrients data for different seasons across different meadows.The results showed that the levels of crude protein(CP),ether extract(EE),ash,soluble sugars(SS),gas production,and energy value of forage in the summer–autumn grazing meadows were higher than those of the winter–spring meadows.Neutral detergent fiber(NDF)and acid detergent fiber(ADF)of forage in the summer–autumn grazing meadows were lower than those of the winter–spring meadows.We found that no pastures were overloaded with metabolizable energy(ME)for the whole year but digestible crude protein(DCP)was overloaded in winter–spring.And there were differences in the amount carrying capacity(forage yield)of seasonal grazing meadows for the different herds,the overload types were annual overloading(herd A),overloaded in summer–autumn(herd B),overloaded in winter–spring(herd C),and not overloaded(herd D).Compared with the previous grazing mode,theoretical carrying capacity,DCP carrying capacity,and ME carrying capacity of herd A increased by 20,19,and 27 sheep units,respectively,after optimization;herd B:36,31,and 45 sheep units,respectively;herd C:28,23,and 44 sheep units,respectively;and herd D:43,40,and 61 sheep units,respectively.In the Three-River Source Region and similar alpine pastoral areas,the grassland-livestock structure should be optimized to improve grassland vegetation status and increase the theoretical carrying capacity.

Field Performance of Quercus bicolor Established as Repeatedly Air-Root-Pruned Container and Bareroot Planting Stock

Benefits of repeated air-root-pruning of seedlings when stepping up to progressively larger containers include excellent lateral root distribution immediately below the root collar and an exceptionally fibrous root ball. To evaluate long-term field performance of repeatedly air-root-pruned container stock, three plantings of swamp white oak (Quercus bicolor Willd.) 10 to 13 years old were located that also included bareroot planting stock. Initial and final stem diameter and height and above-ground green weights were determined on randomly selected trees at each site. On a site with a sandy, excessively drained, high pH soil, trees (age 10) from container stock were 1.5 times taller, 2.3 times larger in dbh, and 2.8 times greater in green weight than trees from bareroot stock which averaged only 2.9 m tall, 3.9 cm dbh, and 16.3 kg green weight. On a site with high clay, poor internal drainage, and frequent flooding, trees (age 12) from container stock were 1.4 times taller, 1.8 times larger in dbh, and 4.1 times greater in green weight than trees from bareroot stock which averaged 4 m tall, 7.3 cm dbh, and 28 kg green weight. On an upland site with deep loess soils, there was a trend for trees (age 13) from container stock to be only slightly larger than trees from bareroot stock with each stock type averaging 9.6 m tall, 20 cm dbh, and 177 kg green weight. Repeated air-root pruning produced lateral roots immediately below the root collar that resulted in large container stock with large well-balanced root systems that were competitive on harsh or less than ideal oak sites. Although the process is relatively labor intensive, propagation of repeatedly air-root-pruned container stock is readily adaptable internationally to locally available sources of organic matter and open-bottom containers.

Scientific data products and the data pre-processing subsystem of the Chang'e-3 mission

The Chang＇e-3 （CE-3） mission is China＇s first exploration mission on the surface of the Moon that uses a lander and a rover. Eight instruments that form the scientific payloads have the following objectives： （1） investigate the morphological features and geological structures at the landing site; （2） integrated in-situ analysis of minerals and chemical compositions; （3） integrated exploration of the structure of the lunar interior; （4） exploration of the lunar-terrestrial space environment, lunar sur- face environment and acquire Moon-based ultraviolet astronomical observations. The Ground Research and Application System （GRAS） is in charge of data acquisition and pre-processing, management of the payload in orbit, and managing the data products and their applications. The Data Pre-processing Subsystem （DPS） is a part of GRAS. The task of DPS is the pre-processing of raw data from the eight instruments that are part of CE-3, including channel processing, unpacking, package sorting, calibration and correction, identification of geographical location, calculation of probe azimuth angle, probe zenith angle, solar azimuth angle, and solar zenith angle and so on, and conducting quality checks. These processes produce Level 0, Level 1 and Level 2 data. The computing platform of this subsystem is comprised of a high-performance computing cluster, including a real-time subsystem used for processing Level 0 data and a post-time subsystem for generating Level 1 and Level 2 data. This paper de- scribes the CE-3 data pre-processing method, the data pre-processing subsystem, data classification, data validity and data products that are used for scientific studies.

A new kind of special function and its application

By virtue of the operator Hermite polynomial method and the technique of integration within the ordered product of operators we derive a new kind of special function, which is closely related to one- and two-variable Hermite polynomials.Its application in deriving the normalization for some quantum optical states is presented.

A new two-mode thermo- and squeezing-mixed optical field

We propose a new two-mode thermo-and squeezing-mixed optical field, described by the new density operator ρ=1-e^f-｜g｜^2 e^ga^＋b^＋e^fa^＋a｜0〉 f_（bb） 〈0｜ e^（g＊ab）, where ｜0〉_（bb） 〈0｜ is the b-mode vacuum, e ^fa^＋arepresents the thermo-field, and e^ga^＋b^＋ indicates squeezing. The photon statistics for ρ is studied by virtue of the method of integration within ordered product（IWOP） of operators. Such a field can be generated when a two-mode squeezed state passes through a one-mode dissipation channel.

Effects of Environmental Conditions and Aboveground Biomass on CO2 Budget in Phragmites australis Wetland of Jiaozhou Bay,China

Estuarial saline wetlands have been recognized as a vital role in CO_2 cycling.However,insufficient attention has been paid to estimating CO_2 fluxes from estuarial saline wetlands.In this study,the static chamber-gas chromatography(GC) method was used to quantify CO_2 budget of an estuarial saline reed(Phragmites australis) wetland in Jiaozhou Bay in Qingdao City of Shandong Province,China during the reed growing season(May to October) in 2014.The CO_2 budget study involved net ecosystem CO_2 exchange(NEE),ecosystem respiration(Reco) and gross primary production(GPP).Temporal variation in CO_2 budget and the impact of air/soil temperature,illumination intensity and aboveground biomass exerted on CO_2 budget were analyzed.Results indicated that the wetland was acting as a net sink of 1129.16 g/m^2 during the entire growing season.Moreover,the values of Reco and GPP were 1744.89 g/m^2 and 2874.05 g/m^2,respectively;the ratio of Reco and GPP was 0.61.Diurnal and monthly patterns of CO_2 budget varied significantly during the study period.Reco showed exponential relationships with air temperature and soil temperature at 5 cm,10 cm,20 cm depths,and soil temperature at 5 cm depth was the most crucial influence factor among them.Meanwhile,temperature sensitivity(Q10) of Reco was negatively correlated with soil temperature.Light and temperature exerted strong controls over NEE and GPP.Aboveground biomass over the whole growing season showed non-linear relationships with CO_2 budget,while those during the early and peak growing season showed significant linear relationships with CO_2 budget.This research provides valuable reference for CO_2 exchange in estuarial saline wetland ecosystem.

A WEIGHTED PRODUCT METHOD FOR BIDDING STRATEGIES IN MULTI-ATTRIBUTE AUCTIONS

To eliminate computational problems involved in evaluating multi-attribute bids with differentmeasures,this article first normalizes each individual component of a bid,and then makes use ofthe weighted product method to present a new scoring function that converts each bid into a score.Twokinds of multi-attribute auction models are introduced in terms of scoring rules and bidding objectivefunctions.Equilibrium bidding strategies,procurer's revenue comparisons and optimal auction designare characterized in these two models.Finally,this article discusses some improvement of robustnessof our models,with respect to the assumptions.

β-Carotene-properties and production methods

β-Carotene belongs to a group of more than 600 compounds,jointly called as carotenoids.It has numerous biological functions in the human body and because human is not able to synthesize any of them,it is necessary to supply these valuable compounds with food or pharmaceuticals.Rising,therefore,market demand stimulates the development of its diverse production methods.Originallyβ-carotene was recovered from plants by physicochemical extraction and mainly from carrots.Nowadaysβ-carotene is mainly produced through chemical synthesis.But quite recently biotechnology makes a great approach towardβ-carotene production as bioactive compounds of natural origin reveal higher bioaccessibility and higher consumer trust on market.

Analysis of ventilated cavitation around a cylinder vehicle with nature cavitation using a new simulation method

In the present paper, a new simulation method is developed for unsteady cavitating flow with air ventilation,which is very useful for alleviating the pressure oscillation in hydroturbine draft tube and reducing the drag force on an underwater vehicle. Because the fluid includes three components, i.e., the water, vapor, and air, the interactions between water–air and water–vapor are treated by applying the level set method, and the effect of surface tension is taken into account in governing equations. Further, the phase change between the water and the vapor is modeled by a homogeneous model,where the effect of air injection is considered by applying the air volume fraction in the mass transport equation. For calibration, the cavitating flows around a cylinder vehicle were simulated using the proposed method, and the numerical results were compared with the experimental data at three different ventilation conditions. The good agreement of cavitation evolutions between the simulation and the experiment indicated that the proposed method was acceptable for the simulation of ventilated cavitating flows with nature cavitation and would be usable for various engineering applications.Moreover, the vorticity analysis depicts that the vortex is closely related to cavitation evolution, and air injection much changes the vorticity production in cavitating flow. It was also revealed that vorticities only occurred in regions with high vapor/air volume fraction and the vortex stretching term created the most vorticities.