The Advantages of Using Rotating Machines with Profiled Rotors

In order to achieve a lower consumed energy, the performance of a new type of rotating volumetric pump with two profiled rotors (variant I) which is compared with a centrifugal pump (variant II) is presented. The analysis regarding the same flow rate of transported liquid and the same pressure increases points out the conduct of the system at the variation of the key operating parameters. The actual driving power of the rotating volumetric pump is higher stating that is more advantageous in operation. The effective efficiency of the system is improved due to the original constructive solution.

Triangle Area Representation for Profiled Fiber Shape

A multi-shape representation approach for measuring geometrical properties of profiled fibers was presented.From closed edge chains of a fiber cross section,three evenly spaced vertices were selected to form a triangle by changing the vertices' spacing,or the step length,the Triangle Area Representation(TAR)was calculated with a special determinant.The bend direction of the two consecutive lines drawn by three vertices determined the sign of the TAR.TARN and TARP were negative and positive extensions of TAR,and used to analyze concave and convex segments on the boundary.The length of TARN measured the size of concaveness.Multi-scale TARPs together with TARN can help to detect fiber conglutinations.

Semi-analytical method for calculating aeroelastic effect of profiled rod flying at high velocity

The key technique of a kinetic energy rod(KER) warhead is to control the flight attitude of rods. The rods are usually designed to different shapes. A new conceptual KER named profiled rod which has large L/D ratio is described in this paper. The elastic dynamic equations of this profiled rod flying at high velocity after detonation are set up on the basis of Euler-Bernoulli beam, and the aeroelastic deformation of profiled rod is calculated by semi-analytical method for calculating the vibration characteristics of variable cross-section beam. In addition, the aeroelastic deformation of the undeformed profiled rod and the aeroelastic deformation of deformed profiled rod which is caused by the detonation of explosive are simulated by computational fluid dynamic and finite element method(CFD/FEM), respectively. A satisfactory agreement of these two methods is obtained by the comparison of two methods. The results show that the semi-analytical method for calculating the vibration characteristics of variable cross-section beam is applied to analyze the aeroelastic deformation of profiled rod flying at high velocity.

Research on Designing Profiled Rod Warhead

A new Kinetic Energy Rod( KER) warhead named profiled rod warhead is proposed in this paper.Based on the design of profiled rod warhead,a model of profiled rod driven by detonation is established. The detonation process is simulated by ANSYS / LS-DYNA,and the deployment velocity and initial flight attitude of rod are achieved. In addition,static rod deployment testing are performed to investigate the damage effect,the spatial flight attitude and deployment velocity. A satisfactory agreement is obtained by the comparison between numerical results and testing results. Meanwhile,the profiled rod studies are conducted to determine a higher penetrability compared with traditional cylindrical rods. Rigid body dynamics equations of profiled rod,which accounts for the influence of air resistance,are set up to predict the flight trajectory of long-distance. The results show that the profiled rod may provide a better penetration angle which still maintains a significant penetrability against projectiles when the rods move off long-distance range.

A three-dimensional inverse method based on moving no-slip boundary for profiled end wall design

How to utilize existing flow control mechanisms to make profiled end wall design more flexible,efficient,and physical is a meaningful challenge.This study presents a three-dimensional inverse method for profiled end wall design to achieve the application of flow control mechanisms.The predetermined pressure distribution on the end wall is reached by modifying the end wall geometry during flow field calculation.A motion velocity model is derived from the normal momentum equation of the moving no-slip boundary to modify the end wall geometry.A Reynolds-Averaged Navier-Stokes(RANS)solver based on the Semi-Implicit Method for Pressure Linked Equations(SIMPLE)algorithm is adopted to simulate the flow field.Based on the mechanism understanding obtained through numerical optimization results,this study adopts the inverse method to redesign an optimized end wall in a compressor cascade.The results indicate that the redesigned end wall exhibits better loss reduction,reducing the overall total pressure loss by 5.5%,whereas the optimized end wall reduces it by 3%.The inverse method allows the imposition of desired influences on the end wall flow without constructing a database,making it highly flexible,efficient,and physical.

Forming process chain for manufacturing complex conical-section profiled rings:On a co-design method

The final quality of complex conical-section rings depends on co-design of multiple processes in forming process chain.In this study,for a complex aeroengine casing ring with a large slope and a flange on its end,a co-design method of the forming process chain is put forward towards the objective of precision forming,which not only proposes a standard process route composed of multiple processes of upsetting,punching,rectangular ring rolling,loose tooling forging and profiled ring rolling,but also presents co-design methods of dies and blanks for all the processes.For profiled ring rolling,a design method of preformed blank that makes the blank and the target conical-section ring have the same axial volume distribution is proposed.By the method,the axial metal redistribution during the process can be alleviated greatly thus improving the forming stability and precision of the ring.Based on the geometric features of designed preformed blank,design methods of blanks and dies for loose tolling forging,rectangular ring rolling,punching and upsetting are proposed sequentially.In view of the key roles of loose tooling forging(manufacturing the preformed blank)and profiled ring rolling on the final quality of the conical ring parts,inherited FE simulations for these two processes are performed to verify the proposed design methods and determine appropriate design parameter.It is demonstrated that the proposed design method has significant advantages in improving forming precision.Besides,a suggestive value 1.5 of the rolling ratio for profiled ring rolling(a key design parameter)is given based on comprehensive consideration of multiple indicators such as ring roundness,deformation uniformity and forming load.The corresponding industrial experiments performed illustrate that a high forming precision of the conical-section aeroengine casing ring is achieved.

点阵激光联合重组牛碱性细胞生长因子治疗皮脂腺增生62例疗效观察

目的观察Profile铒激光治疗皮脂腺增生的效果。方法对62例皮脂腺增生患者采用Profile超级平台铒激光模式进行治疗,并对资料进行回顾性分析。结果62例患者痊愈49例,显效11例,无效2例,总有效率为96.77%。术后瘢痕发生率为6.45%,3~6个月渐平复。暂时性色素改变1~3个月后均自行消退.随访6个月后治疗区未见复发。结论Profile铒激光治疗皮脂腺增生总体疗效较好,安全有效,不良反应小,值得临床推广应用。

从中国首台紫外-可见光高光谱卫星仪器反演得到的高空间分辨率臭氧廓线

Understanding the vertical distribution of ozone is crucial when assessing both its horizontal and vertical transport,as well as when analyzing the physical and chemical properties of the atmosphere.One of the most effective ways to obtain high spatial resolution ozone profiles is through satellite observations.The Environmental Trace Gases Monitoring Instrument(EMI)deployed on the Gaofen-5 satellite is the first Chinese ultraviolet-visible hyperspectral spectrometer.However,retrieving ozone profiles using backscattered radiance values measured by the EMI is challenging due to unavailable measurement errors and a low signal-to-noise ratio.The algorithm developed for the Tropospheric Monitoring Instrument did not allow us to retrieve 87%of the EMI pixels.Therefore,we developed an algorithm specific to the characteristics of the EMI.The fitting residuals are smaller than 0.3%in most regions.The retrieved ozone profiles were in good agreement with ozonesonde data,with maximum mean biases of 20%at five latitude bands.By applying EMI averaging kernels to the ozonesonde profiles,the integrated stratospheric column ozone and tropospheric column ozone also showed excellent agreement with ozonesonde data,The lower layers(0-7.5 km)of the EMI ozone profiles reflected the seasonal variation in surface ozone derived from the China National Environmental Monitoring Center(CNEMC).However,the upper layers(9.7-16.7 km)of the ozone profiles show different trends,with the ozone peak occurring at an altitude of 9.7-16.7 km in March,2019.A stratospheric intrusion event in central China from August 11 to 15,2019,is captured using the EMI ozone profiles,potential vorticity data,and relative humidity data.The increase in the CNEMC ozone co ncentration showed that downward transport enhanced surface ozone pollution.

Investigation on induction brazing of profiled cBN wheel for grinding of Ti-6Al-4V

Profiled monolayer cBN wheel was induction brazed for grinding of titanium dovetail slot in this study.Aimed at acquiring a uniform temperature distribution along the profiled surface and reducing the thermal deformation of the brazed wheel,a finite element model was established to investigate the temperature uniformity during induction brazing.A suitable induction coil and the related working parameters were designed and chosen based on the simulation results.Ag-Cu-Ti alloy and cBN grains were applied in the induction brazing experiment.The results showed geometric deformation of the brazed wheel was no more than 0.01 mm and chemical reaction layer were found on the brazed joint interface.Further validation tests were carried out by grinding of Ti-6 Al-4 V alloy.Compared to the electroplated wheel,the brazed wheel showed better performance such as low specific grinding energy and good ground quality in grinding of Ti-6 Al-4 V alloy.Abrasion wear was found to be the main failure mode for the induction brazed wheel,while adhesion and grains pull-out were the main failure mode for the electroplated wheel.

The N^6-adenine methylation in yeast genome profiled by single-molecule technology

The most common and abundant DNA modification is 5-methylcytosine（5mC）,which has been well-established as an epigenetic mark regulating gene expression in eukaryotes（Jones,2012）.Another DNA modification N^6-methyldeoxyadenosine（6mA）,previously reported as a widespread DNA methylation in prokaryotes.

Longitudinally profiled plate leveling theory based on linear decreasing leveling scheme

An an alytical model based on linear decreasi ng leveli ng scheme was proposed to inv estigate the longitu din ally profiled plate leveling process.Considering the variable cross-sectional thickness of longitudinally profiled plate and the dynamic reductions in leveling rolls,the reduction models of upper and lower rolls,the leveling force model and the leveling moment model were established,respectively,based on linear decreasing leveling scheme.Moreover,the finite element model of longitudinally profiled plate leveling process was established based on ABAQUS.Then,the total displacements of upper and lower rolls,the leveling force and the stress distribution of longifudinally profiled plate in the leveling process were calculated.To verify the validity of the proposed models,calculated leveling forces were compared with the measured values,and very good agreements are found.Calculated results show that linear decreasing leveling scheme is suitable for leveling longitudinally profiled plate.

Analytical model for ultimate loading capacities of continuous composite slabs with profiled steel sheets

Composite slabs with profiled steel sheet are widely applied in practical structures now. Plenty of literatures can be available about simply supported composite slabs with single span. However, continuous slabs always exist in high-rise building structures. In order to obtain the ultimate loading capacity of continuous composite slabs, the full scale test on slab specimens with high cost need to be carried out. This paper presented an analytical model for calculating the ultimate loading capacity of continuous composite slabs. Only the small-scale slide block test needed to be carried out for determining some mechanical parameters, resulting in less cost, compared with the conventional m-k test method. Various load conditions and parameters were considered in the analytical model. The comparison between test results and predicted results showed that the proposed method had enough precision. Furthermore, the simplified method was also proposed for practical design.

Deep learning approaches to recover the plasma current density profile from the safety factor based on Grad–Shafranov solutions across multiple tokamaks

Many magnetohydrodynamic stability analyses require generation of a set of equilibria with a fixed safety factor q-profile while varying other plasma parameters.A neural network(NN)-based approach is investigated that facilitates such a process.Both multilayer perceptron(MLP)-based NN and convolutional neural network(CNN)models are trained to map the q-profile to the plasma current density J-profile,and vice versa,while satisfying the Grad–Shafranov radial force balance constraint.When the initial target models are trained,using a database of semianalytically constructed numerical equilibria,an initial CNN with one convolutional layer is found to perform better than an initial MLP model.In particular,a trained initial CNN model can also predict the q-or J-profile for experimental tokamak equilibria.The performance of both initial target models is further improved by fine-tuning the training database,i.e.by adding realistic experimental equilibria with Gaussian noise.The fine-tuned target models,referred to as fine-tuned MLP and fine-tuned CNN,well reproduce the target q-or J-profile across multiple tokamak devices.As an important application,these NN-based equilibrium profile convertors can be utilized to provide a good initial guess for iterative equilibrium solvers,where the desired input quantity is the safety factor instead of the plasma current density.

Surface and Deep Structure of the Hanshan-Wuwei Basins in the Lower Yangtze Region:Implications for Mesozoic Tectonic Evolution of the South China Block

Indicating the tectonic features of the Hanshan-Wuwei basin can reconstruct the framework of the basins formed in Mesozoic and further understand the Mesozoic tectonic evolution of the South China Block.Studies on surface structure,regional stress field and deep geophysical characteristics of the Mesozoic Hanshan-Wuwei basin in Lower Yangtze region were carried out.NE-NNE trending folds and faults developed in the northern margin of the basins.The reconstruction of tectonic stress fields indicates four stress stages dominating the basins'evolution including NW-SE compression,N-S compression,NW-SE extension and NWW-SEE compression.2D seismic profiles reveal coexistence of thrust,strike-slip and normal faults in the basin.Combined with regional geological studies,the geodynamic processes for the formation of the Hanshan-Wuwei basin can be divided into five stages:1)During the Late Triassic,EW trending foreland basin was formed by N-S compression;2)From Mid-Jurassic to Late Jurassic,continuous compression strengthened the foreland deformation and formed thrust nappes.In this stage,the integrated foreland basin was compartmentalized or fragmented,and transferred to the broken foreland basin;3)NE-trending sinistral strike-slip movement at the beginning of the Early Cretaceous;4)Regional extension resulted in normal faults and rift basins developing in the Late Cretaceous;5)The NWW-SEE compression at the end of the Late Cretaceous caused NW sinistral strike-slip faults to form,which partly transformed the rift basin.

Effect of resistance training volume on body adiposity,metabolic risk,and inflammation in postmenopausal and older females:Systematic review and meta-analysis of randomized controlled trials

Purpose:This meta-analytical study aimed to explore the effects of resistance training(RT) volume on body adiposity,metabolic risk,and inflammation in postmenopausal and older females.Methods:A systematic search was performed for randomized controlled trials in PubMed,Scopus,Web of Science,and SciELO.Randomized controlled trials with postmenopausal and older females that compared RT effects on body adiposity,metabolic risk,and inflammation with a control group(CG) were included.Independent reviewers selected the studies,extracted the data,and performed the risk of bias and certainty of the evidence(Grading of Recommendations,Assessment,Development,and Evaluation(GRADE)) evaluations.Total body and abdominal adiposity,blood lipids,glucose,and C-reactive protein were included for meta-analysis.A random-effects model,standardized mean difference(Hedges’ g),and 95% confidence interval(95%CI) were used for meta-analysis.Results:Twenty randomized controlled trials(overall risk of bias:some concerns;GRADE:low to very low) with overweight/obese postmenopausal and older females were included.RT groups were divided into low-volume RT(LVRT,~44 sets/week) and high-volume RT(HVRT,~77 sets/week).Both RT groups presented improved body adiposity,metabolic risk,and inflammation when compared to CG.However,HVRT demonstrated higher effect sizes than LVRT for glucose(HVRT=-1.19;95%CI:-1.63 to-0.74;LVRT=-0.78;95%CI:-1.15 to-0.41) and C-reactive protein(HVRT=-1.00;95%CI:-1.32 to-0.67;LVRT=-0.34;95%CI,-0.63 to-0.04)) when compared to CG.Conclusion:Compared to CG,HVRT protocols elicit greater improvements in metabolic risk and inflammation outcomes than LVRT in overweight/obese postmenopausal and older females.

Morphological,phylogenetic and metabolite profile of Prorocentrum clipeus,a newly recorded epiphytic dinoflagellate in the northern Yellow Sea

More than 30 species of benthic Prorocentrum have been identified,some of which produce okadaic acid(OA)and its derivatives,dinophysistoxins(DTXs),which cause diarrhetic shellfish poisoning(DSP).Increasing numbers of benthic Prorocentrum species have been reported in tropical and subtropical waters of China.In contrast,only a few benthic Prorocentrum species have been reported in temperate waters.In this study,morphological descriptions obtained using light microscopy,scanning electron microscopy and molecular characterization of one Prorocentrum clipeus strain isolated from the Yellow Sea are presented.Prorocentrum clipeus cells were nearly circular in shape,with a collar,ridge,and one protrusion.The periflagellar area was wide U-shaped,with two curved projections on platelet 1a.Nine periflagellar platelets of different sizes were observed.The morphology closely fits that of the species isolated from other locations.Phylogenetic analysis based on the molecular sequences of the small subunit(SSU)rDNA,internal transcribed spacer(ITS),and large subunit(LSU)rDNA was performed.A comprehensive metabolomic analysis incorporating target,suspect and non-target screenings was first applied to investigate the intracellular and extracellular metabolite profiles of the current isolate of P.clipeus.According to the results of the target and suspect screenings,179 metabolites or toxins produced by DSP-related algal species,including OA,dinophysistoxin-1(DTX1),dinophysistoxin-2(DTX2)and pectenotoxin-2(PTX2),were not detected.Non-target screening involving feature-based molecular networking(FBMN)provided a global view of major metabolites produced by the P.clipeus DF128 strain and revealed 23 clusters belonging to at least 13 compound classes,with organometallic compounds,lipids and lipid-like molecules,phenylpropanoids and polyketides,and benzenoids as major types.To date,this is the first record of the characterization of P.clipeus in samples from Chinese waters.Our results support the wide distribution of epibenthic Prorocentrum species.

An efficient physics-guided Bayesian framework for predicting ground settlement profile during excavations in clay

Recently,the application of Bayesian updating to predict excavation-induced deformation has proven successful and improved prediction accuracy significantly.However,updating the ground settlement profile,which is crucial for determining potential damage to nearby infrastructures,has received limited attention.To address this,this paper proposes a physics-guided simplified model combined with a Bayesian updating framework to accurately predict the ground settlement profile.The advantage of this model is that it eliminates the need for complex finite element modeling and makes the updating framework user-friendly.Furthermore,the model is physically interpretable,which can provide valuable references for construction adjustments.The effectiveness of the proposed method is demonstrated through two field case studies,showing that it can yield satisfactory predictions for the settlement profile.

Soil resilience assessment using soil profile descriptions and Analytic Hierarchy Process in Mediterranean mountains considering diverse fire occurrences

Wildfires are complex natural phenomena that exert significant impacts on landscapes,societies,and economies.Understanding the concept of resilience is crucial in mitigating its possible negative impacts,as it involves preparing for,responding to,and recovering from wildfires.This research aims to demonstrate the utility of in situ soil profile description in assessing land use resilience using an Analytic Hierarchy Process(AHP)through an expert panel survey.The study examines a catchment located in the Balearic Islands,considering two fire occurrences(once and twice),comparing abandoned agricultural terraces and natural hillslopes.The results demonstrated that the priority ranking of variables to assess soil profile resilience against wildfires,determined by a panel of 10 experts,identified horizon depth(25.1%),slope inclination(21.5%),and hydrological connectivity(16.6%)as the most crucial factors.Other variables,such as number and size of roots,structure of pedal soil material,size class structure,and rock fragments,also contributed to resilience but to a lesser extent,with scores ranging from 5.7%to 9.6%.Analyzing the priorities established by the experts using AHP,the results showed that the least resilient soil horizon was H1 of the control hillslope,especially under high and low connectivity processes,which aligned with the loss of superficial soil horizons after one and two wildfires.Hillslopes showed greater changes in resilience after occurring wildfires compared to terraces,with the most significant alterations occurring after the second wildfire event.This study addresses a significant knowledge gap in the field by highlighting the interconnectedness of wildfires,resilience,and land use,providing insights into land management strategies for wildfire-prone regions.

Three-Channel Interference Interpretation of Fano Profile

Fano resonance is a ubiquitous phenomenon, and it is commonly interpreted as a two-channel interference of the discrete and continuous channels. The present work investigates the Fano profile from a perspective of the temporal evolution of the wave function. By exciting the atom with a δ pulse and calculating the evolution of the wave function, the Fano formula is deduced. The results clearly show that the Fano resonance is of a three-channel interference, which is different from the traditional understanding. The three channels are revealed as the groundcontinuum, ground-discrete-continuum, and a previously unmentioned third channel, i.e., ground-continuumdiscrete-continuum. The present three-channel interpretation can be easily generalized to other physical systems,contributing to a deeper understanding of the Fano profile.

TP-PROFILE: Monitoring the Thermodynamic Structure of the Troposphere over the Third Pole

Ground-based microwave radiometers(MWRs)operating in the K-and V-bands(20–60 GHz)can help us obtain temperature and humidity profiles in the troposphere.Aside from some soundings from local meteorological observatories,the tropospheric atmosphere over the Tibetan Plateau(TP)has never been continuously observed.As part of the Chinese Second Tibetan Plateau Scientific Expedition and Research Program(STEP),the Tibetan Plateau Atmospheric Profile(TPPROFILE)project aims to construct a comprehensive MWR troposphere observation network to study the synoptic processes and environmental changes on the TP.This initiative has collected three years of data from the MWR network.This paper introduces the data information,the data quality,and data downloading.Some applications of the data obtained from these MWRs were also demonstrated.Our comparisons of MWR against the nearest radiosonde observation demonstrate that the TP-PROFILE MWR system is adequate for monitoring the thermal and moisture variability of the troposphere over the TP.The continuous temperature and moisture profiles derived from the MWR data provide a unique perspective on the evolution of the thermodynamic structure associated with the heating of the TP.The TP-PROFILE project reveals that the low-temporal resolution instruments are prone to large uncertainties in their vapor estimation in the mountain valleys on the TP.