An efficient algorithm to compute transient pressure responses of slanted wells with arbitrary inclination in reservoirs

Compared with vertical and horizontal wells, the solution and computation of transient pressure responses of slanted wells are more complex. Vertical and horizontal wells are both simplified cases of slanted wells at particular inclination, so the model for slanted wells is more general and more complex than other models for vertical and horizontal wells. Many authors have studied unsteady-state flow of fluids in slanted wells and various solutions have been proposed. However, until now, few of the published results pertain to the computational efficiency. Whether in the time domain or in the Laplace domain, the computation of integration of complex functions is necessary in obtaining pressure responses of slanted wells, while the computation of the integration is complex and time-consuming. To obtain a perfect type curve the computation time is unacceptable even with an aid of high-speed computers. The purpose of this paper is to present an efficient algorithm to compute transient pressure distributions caused by slanted wells in reservoirs. Based on rigorous derivation, the transient pressure solution for slanted wells of any inclination angle is presented. Assuming an infinite-conductivity wellbore, the location of the equivalent-pressure point is determined. More importantly, according to the characteristics of the integrand in a transient pressure solution for slanted wells, the whole integral interval is partitioned into several small integral intervals, and then the method of variable substitution and the variable step-size piecewise numerical integration are employed. The amount of computation is significantly reduced and the computational efficiency is greatly improved. The algorithm proposed in this paper thoroughly solved the difficulty in the efficient and high-speed computation of transient pressure distribution of slanted wells with any inclination angle.

几种任意步距步进相移算法的误差分析与对比

介绍了到目前为止的几种任意步距步进相移算法，并针对相移干涉仪的两种主要误差———移相误差和探测器非线性误差进行了计算仿真，进而比较分析了它们对这这些误差的抑制能力，其结果可为实际应用合理地选择算法提供理论依据。

一种两步相移任意步距相位轮廓测量技术研究

对传统相移轮廓测量技术进行研究，提出基于Gram—Schmidt正交化法的两步相移任意步距相位轮廓测量技术并应用到三维轮廓测量中。由CCD采集两幅投影光栅图，且两幅图像之间的相移值不需要事先给定，可以随机取任意值；在保证精度的前提下，该技术只需两幅变形光栅图，同时无需对相移器的相移精度作要求。实验表明：与现有的几种相移轮廓术比较，提出的两步相移任意步距相位轮廓测量技术可以快速地恢复待测相位，且获取待测物体的三维数据精度较高，具有较强的适用性。

基于改进测量系统的非定步距相位轮廓测量技术研究

提出一种基于改进测量系统,该系统放宽了传统测量光路的3个约束,降低对系统结构的要求;同时结合非定步距轮廓测量技术,与传统相位轮廓测量技术相比较,无需保证等步距相移量,且仅需两幅畸变光栅图像就可以重建物体的三维轮廓。通过理论分析,推导出高度与相位之间的非线性映射函数关系式。实验证明,在满足一定精度要求的同时,该系统对结构条件要求较低,测量速度较快,具有较强的可操作性。

连续生成任意角度圆弧的新算法

栅格圆弧的生成算法在计算机图形学和图像处理中已有大量应用,而能连续生成任意角度圆弧的传统算法容易导致所生成的圆弧出现角点。文章采用8个方向搜索方法可连续生成任意角度圆弧,并规定相邻的2次步进方向角度之差不大于π/4,以避免圆弧出现角点。与传统算法相比,文中算法所生成的圆弧在视觉上更光滑,线条更细,算法效率与精度较高。

一种适合低信噪比投影栅的时空二维相移算法

提出了一种适合低信噪比投影栅的时空二维相移算法。首先设计四步相移正弦光栅条纹图,由DLP投影仪投影到待测物体表面,再由CCD相机采集受物体形貌调制的变形条纹图;然后对其中一幅变形条纹图进行傅里叶变换以确定抽样间隔,再对4幅相移条纹图用相移法求得条纹背景和调制幅度后,对每幅变形条纹图做归一化处理;对每幅相移条纹图在空间域进行下采样抽样和灰度插值,构建相移莫尔条纹图,得到多帧时空域相移条纹图;对多帧时空域相移条纹图按时空二维相移法处理求得莫尔相位,再将莫尔相位与抽样点相位叠加求和得到变形条纹图对应的相位数据;最后,以面膜作为样品进行了实验测量,结果表明,经典四步相移法重构的物体形貌出现明显失真,而本文方法能较好恢复物体的三维形貌。