Reconfigurable mechanism-based metamaterials for ternary-coded elastic wave polarizers and programmable refraction control

Elastic metamaterials with unusual elastic properties offer unprecedented ways to modulate the polarization and propagation of elastic waves.However,most of them rely on the resonant structural components,and thus are frequency-dependent and unchangeable.Here,we present a reconfigurable 2D mechanism-based metamaterial which possesses transformable and frequency-independent elastic properties.Based on the proposed mechanism-based metamaterial,interesting functionalities,such as ternarycoded elastic wave polarizer and programmable refraction,are demonstrated.Particularly,unique ternary-coded polarizers,with 1-trit polarization filtering and 2-trit polarization separating of longitudinal and transverse waves,are first achieved.Then,the strong anisotropy of the proposed metamaterial is harnessed to realize positive-negative bi-refraction,only-positive refraction,and only-negative refraction.Finally,the wave functions with detailed microstructures are numerically verified.

A novel one-time-programmable memory unit based on Schottky-type p-GaN diode

In this work,a novel one-time-programmable memory unit based on a Schottky-type p-GaN diode is proposed.During the programming process,the junction switches from a high-resistance state to a low-resistance state through Schottky junction breakdown,and the state is permanently preserved.The memory unit features a current ratio of more than 10^(3),a read voltage window of 6 V,a programming time of less than 10^(−4)s,a stability of more than 108 read cycles,and a lifetime of far more than 10 years.Besides,the fabrication of the device is fully compatible with commercial Si-based GaN process platforms,which is of great significance for the realization of low-cost read-only memory in all-GaN integration.

Pixelated non-volatile programmable photonic integrated circuits with 20-level intermediate states

Multi-level programmable photonic integrated circuits(PICs)and optical metasurfaces have gained widespread attention in many fields,such as neuromorphic photonics,opticalcommunications,and quantum information.In this paper,we propose pixelated programmable Si_(3)N_(4)PICs with record-high 20-level intermediate states at 785 nm wavelength.Such flexibility in phase or amplitude modulation is achieved by a programmable Sb_(2)S_(3)matrix,the footprint of whose elements can be as small as 1.2μm,limited only by the optical diffraction limit of anin-house developed pulsed laser writing system.We believe our work lays the foundation for laser-writing ultra-high-level(20 levels and even more)programmable photonic systems and metasurfaces based on phase change materials,which could catalyze diverse applications such as programmable neuromorphic photonics,biosensing,optical computing,photonic quantum computing,and reconfigurable metasurfaces.

Teaching Reform and Exploration of Practical Courses Based on Programmable Control

As the country continues to promote the development of intelligent manufacturing,all industries are carrying out enterprise automation upgrading,the Pearl River Delta Intelligent Manufacturing Conference held in March 2024 provides a direction guide for each enterprise on how to integrate the intelligent manufacturing technology into each link and provide direction guidance for enterprises to create new models and new business formats.College teachers,in focusing on the teaching process,should closely match the enterprise and social needs and cultivate excellent students.As the core controller of automation control,the application of programmable controllers in teaching is particularly important.In practical classes,by setting progressive difficulty,project guidance,team collaboration,and other links,students can master the automation equipment design of programmable control in repeated practice.

Low-loss chip-scale programmable silicon photonic processor

Chip-scale programmable optical signal processors are often used to flexibly manipulate the optical signals for satisfying the demands in various applications,such as lidar,radar,and artificial intelligence.Silicon photonics has unique advantages of ultra-high integration density as well as CMOS compatibility,and thus makes it possible to develop large-scale programmable optical signal processors.The challenge is the high silicon waveguides propagation losses and the high calibration complexity for all tuning elements due to the random phase errors.In this paper,we propose and demonstrate a programmable silicon photonic processor for the first time by introducing low-loss multimode photonic waveguide spirals and low-random-phase-error Mach-Zehnder switches.The present chip-scale programmable silicon photonic processor comprises a 1×4 variable power splitter based on cascaded Mach-Zehnder couplers(MZCs),four Ge/Si photodetectors,four channels of thermally-tunable optical delaylines.Each channel consists of a continuously-tuning phase shifter based on a waveguide spiral with a micro-heater and a digitally-tuning delayline realized with cascaded waveguide-spiral delaylines and MZSs for 5.68 ps time-delay step.Particularly,these waveguide spirals used here are designed to be as wide as 2μm,enabling an ultralow propagation loss of 0.28 dB/cm.Meanwhile,these MZCs and MZSs are designed with 2-μm-wide arm waveguides,and thus the random phase errors in the MZC/MZS arms are negligible,in which case the calibration for these MZSs/MZCs becomes easy and furthermore the power consumption for compensating the phase errors can be reduced greatly.Finally,this programmable silicon photonic processor is demonstrated successfully to verify a number of distinctively different functionalities,including tunable time-delay,microwave photonic beamforming,arbitrary optical signal filtering,and arbitrary waveform generation.

Programmable Logic Controller Block Monitoring System for Memory Attack Defense in Industrial Control Systems

Cyberattacks targeting industrial control systems(ICS)are becoming more sophisticated and advanced than in the past.A programmable logic controller(PLC),a core component of ICS,controls and monitors sensors and actuators in the field.However,PLC has memory attack threats such as program injection and manipulation,which has long been a major target for attackers,and it is important to detect these attacks for ICS security.To detect PLC memory attacks,a security system is required to acquire and monitor PLC memory directly.In addition,the performance impact of the security system on the PLC makes it difficult to apply to the ICS.To address these challenges,this paper proposes a system to detect PLC memory attacks by continuously acquiring and monitoring PLC memory.The proposed system detects PLC memory attacks by acquiring the program blocks and block information directly from the same layer as the PLC and then comparing them in bytes with previous data.Experiments with Siemens S7-300 and S7-400 PLC were conducted to evaluate the PLC memory detection performance and performance impact on PLC.The experimental results demonstrate that the proposed system detects all malicious organization block(OB)injection and data block(DB)manipulation,and the increment of PLC cycle time,the impact on PLC performance,was less than 1 ms.The proposed system detects PLC memory attacks with a simpler detection method than earlier studies.Furthermore,the proposed system can be applied to ICS with a small performance impact on PLC.

High-Bandwidth,Low-Power CMOS Transistor Based CAB for Field Programmable Analog Array

This article presents an integrated current mode configurable analog block(CAB)system for field-programmable analog array(FPAA).The proposed architecture is based on the complementary metal-oxide semiconductor(CMOS)transistor level design where MOSFET transistors operating in the saturation region are adopted.The proposed CAB architecture is designed to implement six of thewidely used current mode operations in analog processing systems:addition,subtraction,integration,multiplication,division,and pass operation.The functionality of the proposed CAB is demonstrated through these six operations,where each operation is chosen based on the user’s selection in the CAB interface system.The architecture of the CAB system proposes an optimized way of designing and integrating only three functional cells with the interface circuitry to achieve the six operations.Furthermore,optimized programming and digital tuning circuitry are implemented in the architecture to control and interface with the functional cells.Moreover,these designed programming and tuning circuitries play an essential role in optimizing the performance of the proposed design.Simulation of the proposed CMOS Transistor Based CAB system is carried out using Tanner EDA Tools in 0.35μm standard CMOS technology.The design uses a±1.5 V power supply and results in maximum 3 dB bandwidth of 34.9 MHz and an approximate size of 0.0537 mm2.This demonstrates the advantages of the design over the current state-of-the-art designs presented for comparison in this article.Consequently,the proposed design has a clear aspect of simplicity,low power consumption,and high bandwidth operation,which makes it a suitable candidate for mobile telecommunications applications.

National Social Investment Programmes in Nigeria:A Descriptive Analysis of the Socio-Economic Contributions of N-Power Programme in Benue State

This study analysed the socio-economic contributions of N-Power programme amongst the beneficiaries of the scheme in Benue State.Prior to the introduction of N-Power programme,successive administrations in Nigeria have made concerted efforts towards improving the standard of living of the citizenry through the execution of various welfare or social intervention programmes,but not much successes were recorded.Learning from the mistakes of the past regimes,and by way of deliberate state policy,the Buhari’s government initiated a multi-pronged social investment policy,one of which is the N-power programme that came onboard in 2016,which also doubles as the subject of this study.To achieve the goal of this study,a combination of desktop research and survey design was employed.Questionnaires were administered to 390 respondents through a combination of stratified and random sampling techniques.The results of the survey were matched with that of the secondary data obtained through online websites and other related sources.The result indicated that N-Power made positive contributions to the socio-economic life of the beneficiaries in Benue State:specifically,the scheme contributed in poverty eradication,employment generation,skills acquisitions and capacity building.However,some aspect of our findings revealed that the programme has a number of challenges such as:inadequate cash support,delay in monthly cash transfer to beneficiaries,distance participants had to move to their work stations,absence of posting in N-Teach scheme,and lack of adequate working tools amongst others.To salvage this problem the paper recommended the following solutions:expansion of the scheme to cover N-Teach and other aspects,increment in the monthly cash transfer to cushion the high rate of inflation,support for the participants/beneficiaries in transportation and logistics,enrolment of more youth into the various schemes,proper monitoring and evaluation of the implementation of the schemes amongst others.

一款基于新型Field Programmable Gate Array芯片的投影仪梯形校正系统研究与实现

投影设备配备的梯形校正普遍存在校正范围小,画面的一些线条和字符边缘会出现毛刺和不平滑现象,矫正效果不理想.如果采用通用的图像处理芯片和复杂的算法,可以解决上述问题,但又会导致成本急剧上升.为了解决上述矛盾,提出一种基于FPGA(Field Programmable Gate Array)芯片的新型梯形校正实现方案,解决了校正范围与锯齿失真的矛盾问题,并为进一步成为芯片级产品铺平了道路.图像处理采用kaiser窗函数和sinc函数相结合的方法进行插值,这样的滤波器改善了旁瓣抑制,具有较好的通带性能.介绍了梯形失真的产生和校正原理,提出了利用FPGA芯片XC3S400作为核心图像处理单元的梯形校正系统的硬件和软件实现,说明了该芯片结构、功能及特性,最后提供了校正的效果图.

A Programmable 2.4GHz CMOS Multi-Modulus Frequency Divider

A programmable multi-modulus frequency divider is designed and implemented in a 0. 35μm CMOS process. The multi-modulus frequency divider is a single chip with two dividers in series,which are divided by 4 or 5 prescaler and by 128-255 multi-modulus frequency divider. In the circuit design, power and speed trade-offs are analyzed for the prescaler, and power optimization techniques are used according to the input frequency of each divider cell for the 128-255 multimodulus frequency divider. The chip is designed with ESD protected I/O PAD. The dividers chain can work as high as 2.4GHz with a single ended input signal and beyond 2.6GHz with differential input signals. The dual-modulus prescaler consumes 11mA of current while the 128-255 multi-modulus frequency divider consumes 17mA of current with a 3.3V power supply. The core area of the die without PAD is 0.65mm × 0.3mm. This programmable multi-modulus frequency divider can be used for 2.4GHz ISM band PLL-based frequency synthesizers. To our knowledge, this is the first reported multi-modulus frequency divider with this structure in China.

0.18μm CMOS programmable frequency divider design for DVB-T

The implementation of a programmable frequency divider, which is one of the components of the phase-locked loop （PLL） frequency synthesizer for digital video broadcastingterrestrial （DVB-T） and other modem communication systems, is presented. By cooperating with a dual-modulus prescaler, this divider can realize an integer frequency division from 926 to 1 387. Besides the traditional standard cell design flow, such as logic synthesis, placement and routing, the interactions between front-end and back-end are also considered to optimize the design flow under deep submicron technology. By back-annotating the back-end information to front-end design, a custom wire-load model is created which is more practical compared with the default model. This divider has been fabricated in TSMC 0. 18μm CMOS technology using Artisan standard cell library. The chip area is 675 μm × 475 μm and the power consumption is about 2 mW under a 1.8 V power supply. Measurement results show that it works correctly and can realize a frequency division with high precision.

IC Implementation of a Programmable CMOS Voltage Reference

A new approach for the design and implementation of a programmable voltage reference based on an improved current mode bandgap voltage reference is presented. The circuit is simulated and fabricated with Chartered 0. 35μm mixed-signal technology. Measurements demonstrate that the temperature coefficient is ± 36. 3ppm/℃ from 0 to 100℃ when the VID inputs are 11110.As the supply voltage is varied from 2.7 to 5V, the voltage reference varies by about 5mV. The maximum glitch of the transient response is about 20mV at 125kHz. Depending on the state of the five VID inputs,an output voltage between 1.1 and 1.85V is programmed in increments of 25mV.

A signal-summing programmable gain amplifier employing binary-weighted switching and constant-g--_m bias

A novel programmable gain amplifier（ PGA） based on a signal-summing topology is proposed. Different from conventional signal-summing variable gain amplifiers（ VGA）,a binary-weighted switching technique is employed to vary the current-steering transistors＇ aspect ratio to change their transconductance, and hence, an accurate gain step size of 6dB is achieved. The constant-g_m biasing technique and the matching of the transistors and resistors ensures that the gain of the proposed topology is independent of the variation of process, voltage and temperature（ PVT）. P-well NMOS（ Nmetal oxide semiconductor） transistors are utilized to eliminate the influence of back-gate effect which will induce gain error.The source-degeneration technique ensures good linearity performance at a low gain. The proposed PGA is fabricated in a0.18 μm CMOS（ complementary metal oxide semiconductor）process. The measurement results show a variable gain ranging from 0 to24 dB with a step size of 6 dB and a maximum gain error of 0. 3dB. A constant 3dB bandwidth of 210 MHz is achieved at different gain settings. The measured output 3rd intercept point（OIP3） and minimum noise figure（ NF） are20. 9 dBm and 11.1 dB, respectively. The whole PGA has a compact layout of 0.068 mm^2. The total power consumption is4. 8 mW under a 1. 8 V supply voltage.

FPGA-Based Efficient Programmable Polyphase FIR Filter

The modelling, design and implementation of a high-speed programmable polyphase finite impulse response (FIR) filter with field programmable gate array (FPGA) technology are described. This FIR filter can run automatically according to the programmable configuration word including symmetry/asymmetry, odd/even taps, from 32 taps up to 256 taps. The filter with 12 bit signal and 12 bit coefficient word-length has been realized on a Xilinx VirtexⅡ-v1500 device and operates at the maximum sampling frequency of (160 MHz.)

The design and simulation of a titanium oxide memristor-based programmable analog filter in a simulation program with integrated circuit emphasis

In many communication and signal routing applications, it is desirable to have a programmable analog filter. According to this practical demand, we consider the titanium oxide memristor, which is a kind of nano-scale electron device with low power dissipation and nonvolatile memory. Such characteristics could be suitable for designing the desired filter. However, both the non-analytical relation between the memristance and the charges that pass through it, and the changeable V-I characteristics in physical tests make it difficult to accurately set the memristance to the target value. In this paper, the conductive mechanism of the memristor is analyzed, a method of continuously programming the memristance is proposed and simulated in a simulation program with integrated circuit emphasis, and its feasibility and compatibility, both in simu- lations and physical realizations, are demonstrated. This method is then utilized in a first-order active filter as an example to show its applications in programmable filters. This work also provides a practical tool for utilizing memristors as resistance programmable devices.

Design of 0.18 μm CMOS programmable frequency divider based on standard cells

The design of a programmable frequency divider, which is one of the components of the phase-locked loop （PLL） frequency synthesizer for transmitter and receiver in IEEE 802. 11 a standard, is investigated. The main steps in very large-scale integration （VLSI） design flow such as logic synthesis, floorplan and placement ＆ routing （P ＆ R） are introduced. By back-annotating the back-end information to the front-end design, the custom wire-load model is created and used for optimizing the design flow under deep submicron technology. The programmable frequency divider is implemented based on Artisan TSMC （Taiwan Semicoductor Manufacturing Co. Ltd. ）0. 18μm CMOS （complementary metal-oxide-semiconductor） standard cells and fabricated. The Chip area is 1 360. 5μm^2 and can work in the range of 100 to 200 MHz. The measurement results indicate that the design conforms to the frequency division precision.

A New Design Method for Variable Digital Filter Based on Field Programmable Gate Array(FPGA)

In order to obtain variable characteristics,the digital filter's type,number of taps and coefficients should be changed constantly such that the desired frequency-domain characteristics can be obtained.This paper proposes a method for self-programmable variable digital filter(VDF) design based on field programmable gate array(FPGA).We implement a digital filter system by using custom embedded micro-processor,programmable finite impulse response(P-FIR) macro module,coefficient-loader,clock manager and analog/digital(A/D) or digital/analog(D/A) controller and other modules.The self-programmable VDF can provide the best solution for realization of digital filter algorithms,which are the low-pass,high-pass,band-pass and band-stop filter algorithms with variable frequency domain characteristics.The design examples with minimum 1 to maximum 32 taps FIR filter,based on Modelsim post-routed simulation and onboard running on XUPV5-LX110T,are provided to demonstrate the effectiveness of the proposed method.

Programmable Adaptive Security Scanning for Networked Microgrids

Communication-dependent and software-based distributed energy resources(DERs)are extensively integrated into modern microgrids,providing extensive benefits such as increased distributed controllability,scalability,and observability.However,malicious cyber-attackers can exploit various potential vulnerabilities.In this study,a programmable adaptive security scanning(PASS)approach is presented to protect DER inverters against various power-bot attacks.Specifically,three different types of attacks,namely controller manipulation,replay,and injection attacks,are considered.This approach employs both software-defined networking technique and a novel coordinated detection method capable of enabling programmable and scalable networked microgrids(NMs)in an ultra-resilient,time-saving,and autonomous manner.The coordinated detection method efficiently identifies the location and type of power-bot attacks without disrupting normal NM operations.Extensive simulation results validate the efficacy and practicality of the PASS for securing NMs.

Programmable Logic Based on Large Magnetoresistance of Germanium

We find extremely large low-magnetic-field magnetoresistance （~350% at 0.2 T and ~180% at 0.1 T） in germa- nium at room temperature and the magnetoresistanee is highly sensitive to the surface roughness. This unique magnetoelectric property is applied to fabricate logic architecture which could perform basic Boolean logic in- cluding AND, OR, NOR and NAND. Our logic device may pave the way for a high performance microprocessor and may make the germanium family more advanced.

LOGIC STRUCTURE OF PROGRAMMABLE INSTRUCTIONS FOR JAVA PROCESSORS

There are varieties of embedded systems in the world. It is a big challenge to optimize the instruction sets of System on Chips (SoCs) according to different systems' working environments. The idea of programmable instruction set is an effective method to gain embedded system's re-configurability. This letter presents a logic module for Java processor to be capable of using programmable instruction set. Cost (area, power, and timing) of the module is trivial. Such module is also reusable for other embedded system solutions besides Java systems.