Study on element detection and its correction in iron ore concentrate based on a prompt gamma-neutron activation analysis system

A prompt gamma-neutron activation analysis(PGNAA) system was developed to detect the iron content of iron ore concentrate. Because of the self-absorption effect of gamma-rays and neutrons, and the interference of chlorine in the neutron field, the linear relationship between the iron analytical coefficient and total iron content was poor, increasing the error in the quantitative analysis. To solve this problem, gamma-ray self-absorption compensation and a neutron field correction algorithm were proposed, and the experimental results have been corrected using this algorithm. The results show that the linear relationship between the iron analytical coefficient and total iron content was considerably improved after the correction. The linear correlation coefficients reached 0.99 or more.

Design of a prompt-gamma neutron activation analysis system on China Advanced Research Reactor

In this paper,computational methods are used to optimize the design of a prompt-gamma neutron activation analysis(PGNAA) system on China Advanced Research Reactor(CARR).Approaches are adopted for obtaining accurate neutron beam parameter and saving the computing time.For the radiation shielding design,the optimizing factors include the cost,weight,volume,machining convenience and background radiation at the detector position.Low background spectrum and high sensitivity are expected.The simulation results,and experiences from international PGNAA community,were used in the design of the CARR PGNAA system.

Overview of Industrial Materials Detection Based on Prompt Gamma Neutron Activation Analysis Technology

Prompt gamma neutron activation analysis (PGNAA) is a non-destructive online measurement nuclear analysis method. With its unique advantages, it has been widely used in online analysis of industrial materials such as coal, cement, and minerals in recent years. However, there are many kinds of literature on PGNAA in the field of industrial materials detection, and there are still a few concluding articles. To this end, based on the principle of PGNAA online analysis, the status quo and development of the real-time online detection of industrial material components in the field are reviewed and discussed by consulting a large number of domestic and foreign PGNAA related literature and data, to facilitate the reference of relevant scientific researchers.

Accumulation of heavy metals in two crop seeds due to soil contamination as determined by neutron activation analysis techniques

Samples of two crop seeds (corn and sesame) grown on different contaminated soil sources were collected and prepared for neutron activation analysis. Soil contamination sources were organic waste compost applied to soil amendments namely, sewage sludge(Bs) and municipal solid waste (MSW) at 4%, 6% and 8% respectively. The non destructive NAA technique was used to determine some trace elements accumulation in plant seeds. Results revealed that increasing rate of tested organic waste resulted in dramatic increase in tested heavy metals levels in seeds(i.e., Fe, Zn, Co, Cr, Sc and Hg). Sesame seeds showed higher affinity to accumulate trace elements than corn grains in most tested elements. Moreover, MSW addition enhanced the accumulation of tested metals in seeds more than Bs compost.

Application of neutron activation analysis in geochemistry and cosmochemistry

Generalized the use of neutron activation analysis(NAA)in the investigations of unique processes occurring in early stages of formations and evolution of bodies in solar system Out of them the formation of chondrules,emergence of ultra refractory inclusions in carbonaceous chondrites,formation of metallic and silicate phases of iron and stone meteorites,and formation of iron meteorites of different chemical groups Changes in regolite and lunar rock contents,differentiation in the upper mantle matter, identification of earthly meteoritic craters,transportation of cosmic(meteoritic)materials on to the Earth, investigations of unique events like Tunguska fall of the year 1908 and also ore formation studies and processes taking place on geochemical barrier type river-sea,ocean-atmosphere and so on Prospectives of NAA are pointed out

Instrumental neutron activation analysis of beachrock samples of South East Coast of Tamilnadu,India

Element profiles of some beach rock samples collected from South East Coast of Tamilnadu, India have been determined using single comparator method of INAA. The geo-chemical behavior of the elements in the region is discussed. The irradiations were done at thermal neutron flux of ~ 1011 cm-2·s-1 at 20kW power using Kalpakkam Mini Reactor (KAMINI), IGCAR, Kalpakkam, Tamilnadu, India. Around 19 elements have been determined from 15 samples by high-resolution gamma spectrometry. The accuracy and precision were evaluated by assaying the irradiated Standard Reference Material (SRM 1646a Estuarine sediment) and were found to be in good agreement with certified values.

Flux measurements for a DD neutron generator using neutron activation analysis

The fast and maximum thermal neutron fluxes from the DD-109 neutron generator at the University of Sharjah were experimentally measured by the activation technique using different neutron reactions. The thermal and fast neutron fluxes were found to be 2.960 × 10~6 and6.186 × 10~7 n/cm^2 s, respectively. This was done to verify the modeling results for the optimum moderator thickness needed to maximize the thermal neutron flux. The optimum moderator thickness was found to be between 3.5 and4 cm. The present data were compared with the detailed MCNP model-based calculation performed in earlier work to simulate the generator.

THE MEASUREMENT OF SLIGHT WEAR OF ENGINEERING PLASTIC COMPOSITES USING NEUTRON ACTIVATION ANALYSIS

In this paper, an experimental method was described for measuring very slight wear of polymer by using neutron activation analysis (NAA). By means of adopting appropriate neutron flux suitable experimental parameters and measuring technique, the method was performed under the condition without any effect upon the mechanical properties of wearing. The sensitivity of the wear measurements reached the order of magnitude of 10-7g for engineering plastics containing about 1 wt% of zinc. The comparison could be made rapidly between different materials with different resistance to wear. The results were free from the influence of vibration of test systems, elastic deformation of materials, media and moisture absorption, and etc. Combined with autoradiograph, the present technique can be used to investigate the backtransfer of ground debris of metallic fillers from the counter part to the specimen. A multifunctional plane wear testing machine was set up for obtaining wear data and friction coefficient. The present work provides a new, rapid and sensitive measuring technique and also a screening method for the wear of polymers.

AN EXPERT SYSTEM FOR NEUTRON ACTIVATION ANALYSIS

An expert system for neutron activation analysis has been designed on personal computer. It is mainly structured by means of the MDBS GURU, and composed of three subsystems: spectrum analysis, experiment design and data management. The gamma spectra from multiple channel analyzer can be treated conveniently with conventional methods and/or intellectualized isotope identification based on expert experiences. Fuzzy variable and its algebra are employed for inferring and expression of some conclusions. A procedure for quality control has been created to check the analytical quality. Suggestion of planning an experiment for a certain material can be obtained, and a gamma spectrum can be predicted or simulated. There is a data bank for saving the element concentrations.

The affect of industrial activities on zinc in alluvial Egyptian soil determined using neutron activation analysis

Thirty two surface (0—20 cm) soil samples were collected from different locations in Egypt representing non polluted, moderately and highly polluted soils. The aim of this study was to evaluate total Zn content in alluvial soils of Nile Delta in Egypt by using the delayed neutron activation analysis technique (DNAA), in the irradiation facilities of the first Egyptian research reactor (ET RR 1). The gamma ray spectra were recorded with a hyper pure germanium detection system. The well resolved gamma ray peak at 1116.0 keV was efficiently used for 65 Zn content determination. Zn content in non polluted soil samples ranged between 74.1 and 103.8 ppm with an average of 98.5±5.1 ppm. Zn content in moderately polluted soils ranged between 136.0 and 232.5 ppm with an average of 180.1±32.6 ppm. The highest Zn levels ranging from 240.0 and 733.0 ppm with an average of 410.3±54.4 ppm, were observed in soil samples collected from, either highly polluted agricultural soils exposed to prolonged irrigation with industrial wastewater or surface soil samples from industrial sites.

Neutron activation analysis of ceramic tiles and its component and radon exhalation rate

The concentrations of 20 trace elements in several ceramics tiles and ceramic composites used in Egypt were elementally analyzed by neutron activation analysis(NAA) technique. The samples and standard were irradiated with reactor for 4 h(in the Second Research Egyptian Reactor(Et-RR-2)) with thermal neutron flux 5.9×10 13 n/(cm 2·s).The gamma-ray spectra obtained were measured for several times by means of the hyper pure germanium detection system(HPGe). Also a solid state nuclear track detector(SSNTD) CR-39, was used to measure the emanation rate of radon for these samples. The radium concentrations were found to vary from 0.39—3.59 ppm and the emanation rates were found to vary from (0.728—5.688) × 10 -4 kg/(m 2· s).The elemental analysis of the ceramic tiles and ceramic composites have a great importance in assigning the physical properties and in turn the quality of the material.

An application of a simple computer program for neutron activation analysis

A simple computer program is designed for estimation of elemental concentration values in complex samples by neutron activation analysis technique. The program is applied for an Egyptian cement sample which irradiated at the Egyptian Research Reactor 1(ET RR 1). The data obtained is compared with the reported values. The time consumed for such calculations has a remarkable reduction in comparison with the routine work.

Elemental analysis of some Egyptian ores and industrial iron samples by neutron activation analysis

Elemental analysis of iron ore samples and first industrial iron production prepared by the Egyptian Iron and Steel Company of Helwan near Cairo were determined by instrumental neutron activation analysis technique. Five samples from each kind were irradiated for a 48 hours at a thermal neutron flux of 4×10 12 n/(cm 2.s) in the first Egyptian research reactor ET RR 1. Also the Pneumatic irradiation Rabbit system (PIRS) attached to the reactor in Inshass, was used to measure the elements of short life time. The gamma ray spectra were recorded by means of the hyper pure germanium detection system. The concentration percentage values of major, minor and trace elements are presented. The long and short lived isotopes were considered. A comparative study and a discussion on the elemental concentration values are given.

Assessment of Minor and Trace Elements in Aquatic Macrophytes, Soils and Bottom Sediments Collected along Different Water Objects in the Black Sea Coastal Zone by Using Neutron Activation Analysis

The levels and compartmentalization of Na, Mg, Al, Cl, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Zn, As, Se, Br, Rb, Sr, Mo, Sb, I, Cs, Ba, La, Ce, Sm, Eu, Tb, Hf, Ta, Au, Th, and U in Phragmites australis (Cav.) Trin. ex Steud., Carex conescens L. and Cladophora sericea (Hudson) Kutzing from the Caucasian coast of the Black Sea-Anapa recreational region was investigated by Neutron Activation Analysis. The study touches upon subject of the sediment-to-plant and root-to-leaf elemental transfer as well as of the influence of anthropogenic pollution on wetland ecosystems in zone of resort. The content of the majority of considered elements was found higher in the belowground organs of P. australis than in the aboveground tissues while a reverse regularity was evidenced for C. conescens. The levels of elements decrease from bottom sediments to aquatic plants with the notable exception of the halogens Cl, Br and I that presented 5 to 100 fold higher content in plants than in sediments. The increased levels of As, Mo, and Sb in some soil and sediment samples most probably indicate the anthropogenic pollution. It recommends them for a continuous monitoring of the same area.

Neutron Activation Analysis and Scanning Electron Microscopy of Phytoplankton in the Coastal Zone of Crimea (The Black Sea)

The physiology and ecology of planktonic organisms are influenced by the concentration, chemical speciation and resulting bioavailability of some trace metals. The determination of the elemental structure of phytoplankton is important for interpretation of physiological and functional states of coastal ecosystems. The present study is focused on the structure and elemental composition of the phytoplankton assemblages from the different coastal zones by instrumental neutron activation analysis (INAA), scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDS). For the first time these complementary techniques were simultaneously applied to study the Black Sea phytoplankton. The concentrations of 45 elements in the coastal phytoplankton communities used as bioindicator of inorganic contamination of the Black Sea coastal area near Sevastopol, Ukraine, were determined. Phytoplankton samples were collected by total tows of the plankton net with 35 μm pore size at 3 stations situated in polluted and relatively pristine water areas of the Sevastopol coastal zone during autumn period of the phytoplankton growth. The concentration of Mg, Al, Sc, Ti, V, Mn, As, Rb, Ba, Th and Fe, Cr increases exponentially from relatively pristine station to more polluted station and 10-times and 3-times greater, respectively, in the phytoplankton of the Sevastopol Bay. The rare-earth elements have relatively the same concentration values less than 1 μg/g and tend to accumulate in the phytoplankton from the polluted station in the Sevastopol Bay. The obtained results are in a good agreement with the elemental concentration data in the oceanic plankton, plankton communities from the White Sea and the Black Sea. Using energy-dispersive X-ray spectrometry the mineral particles of unknown origin and impurities of copper (0.42% by weight) in the phytoplankton at the polluted station and zinc (0.57% by weight) at the relatively pristine station were determined.

Neutron activation method in the analysis of environmental objects

ＮｅｕｔｒｏｎａｃｔｉｖａｔｉｏｎｍｅｔｈｏｄｉｎｔｈｅａｎａｌｙｓｉｓｏｆｅｎｖｉｒｏｎｍｅｎｔａｌｏｂｊｅｃｔｓＧ．Ｍ．Ｋｏｌｅｓｏｖ（Ｖ．Ｉ．ＶｅｒｎａｄｓｋｙＩｎｓｔｉｔｕｔｅｏｆＧｅｏｃｈｅｍ。＆Ａｎａｌ．Ｃｈｅｍ．，ＲｕｓｓｉａｎＡｃａｄ...

Determination of Major, Minor and Trace Element Compositions of the Gd₂O₂S:Pr,Ce Scintillation Ceramics with Neutron Activation Analysis

Neutron activation analysis technique of the Gd2O2S:М scintillation ceramics was developed. The concentrations of 15 trace, minor and major elements (As, Ce, Co, Cr, Cs, Eu, Fe, La, Sc, Tb, Zn, Zr, Pr, Gd, Na) have been measured with the instrumental neutron activation analysis of the Gd2O2S:Pr sample. The concentrations range of the determined elements is from 3 × 10-8 to 2.0% in mass. The determination limit of the elements was calculated to be (0.6 - 1.3 × 10-8% in mass).

Absolute Neutron Activation Analysis Technique of a Large Crude Oil Sample

This manuscript presents an application of calculation methods in neutron activation analysis (NAA) of a large crude oil sample. Monte-Carlo computer code was developed. The computer code calculates neutron cross sections and neutron flux density distribution in the interior large sample. ENDF/B-VII.0 data files and ENSDF BNL-NCS-51655-01/02-Rev data files were used as nuclear databases in our computer code. HPGe planar detector efficiency registration technique and the software were developed for the absolute NAA technique of the large sample. The concentrations of Na, K, Ca, Sc, Cr, Fe, Co, Ni, Cu, Zn, Ga, As, Br, Sr, Zr, Mo, Ag, Sb, Cs, Ba, Ce, Nd, Sm, Eu, Tb, Dy, Ho, Tm, Yb, Lu, Hf, Ta, W, Pt, Au, Hg, Th and U in the crude oil samples of Eastern Siberia oilfield were determined using calculation and relative techniques in the concentration range from 10-9 to 0.5%.

A brief introduction to neutron activation analysis in China―history,major achievements,and future perspectives

The history,the major achievements in both methodology and applications,the current trends and future perspectives of neutron activation analysis (NAA) in China are briefly described.

Assessment of some chemical element contents in Traganum nudatum Del shrub using instrumental neutron activation analysis

Instrumental neutron activation analysis(INAA)has been used to determine some chemical element contents(K,Ca,Na,Fe,Zn,Co,Eu,Sb,and Sc)in Traganum nudatum Del(Chenopodiaceae family)consumed in North African rangelands by sheep livestock.Samples were collected from the area of Djelfa in an arid steppe of Algeria.Results show that pasture halophyte had sufficient levels of K,Ca,Zn,and Co to meet the requirements of ruminants.However,it seems that this halophyte shrub had substantial amounts of Na,higher than the critical level established by the National Research Council(NRC).Eu,Sb,and Sc were within the safety baseline of all the assayed elements recommended by the NRC.The high Na content(～10 g/kg)in this halophytic species requires elevated intake of water by livestock.