Experimental investigation of propagation mechanisms and fracture morphology for coalbed methane reservoirs

Fracture propagation mechanisms in coalbed methane(CBM) reservoirs are very complex due to the development of the internal cleat system. In this paper, the characteristics of initiation and propagation of hydraulic fractures in coal specimens at different angles between the face cleat and the maximum horizontal principal stress were investigated with hydraulic fracturing tests. The results indicate that the interactions between the hydraulic fractures and the cleat system have a major effect on fracture networks. "Step-like’’ fractures were formed in most experiments due to the existence of discontinuous butt cleats. The hydraulic fractures were more likely to divert or propagate along the butt cleat with an increase in the angles and a decrease in the horizontal principal stress difference. An increase in the injection rate and a decrease in the fracturing fluid viscosity were more conducive to fracture networks. In addition, the influence on fracture propagation of the residual coal fines in the wellbore was also studied. The existence of coal fines was an obstacle in fracturing, and no effective connection can be formed between fractures. The experimental investigation revealed the fracture propagation mechanisms and can provide guidance for hydraulic fracturing design of CBM reservoirs.

Numerical Investigation on the Propagation Mechanism of Steady Cellular Detonations in Curved Channels

The propagation mechanism of steady cellular detonations in curved channels is investigated numerically with a detailed chemical reaction mechanism, The numerical results demonstrate that as the radius of the curvature decreases, detonation fails near the inner wall due to the strong expansion effect. As the radius of the curvature increases, the detonation front near the inner wall can sustain an underdriven detonation. In the case where deto- nation fails, a transverse detonation downstream forms and re-initiates the quenched detonation as it propagates toward the inner wall. Two kinds of propagation modes exist as the detonation is propagating in the curved channel. One is that the detonation fails first, and then a following transverse detonation initiates the quenched detonation and this process repeats itself. The other one is that without detonation failure and re-initiation, a steady detonation exists which consists of an underdriven detonation front near the inner wall subject to the diffraction and an overdriven detonation near the outer wall subject to the compression.

Analysis of wave propagation on human body based on stratified media model

Human body communication(HBC) is a promising near-field communication(NFC) method emerging in recent years. But existing theoretical models of HBC are too simple to simulate the wave propagation on human body. In this work, in order to clarify the propagation mechanism of electromagnetic wave on human body, a surface waveguide HBC theoretical model based on stratified media cylinder is presented. A numerical model analyzed by finite element method(FEM) is used for comparing and validating the theoretical model. Finally, results of theoretical and numerical models from 80 MHz to 200 MHz agree fairly well, which means that theoretical model can characterize accurate propagation mechanism of HBC signal. Meanwhile, attenuation constants derived from two kinds of models are within the range from 1.64 to 3.37, so that HBC signal can propagate effectively on human body. The propagation mechanism derived from the theoretical model is useful to provide design information for the transmitter and the modeling of the propagation channel in HBC.

Reliability analysis of k-out-of-n system with load-sharing and failure propagation effect

In complex systems,functional dependency and physical dependency may have a coupling effect.In this paper,the reliability of a k-out-of-n system is analyzed considering load-sharing effect and failure mechanism(FM)propagation.Three types of FMs are considered and an accumulative damage model is proposed to illustrate the system behavior of the k-out-of-n system and the coupling effect between load-sharing effect and FM propagation effect.A combinational algorithm based on Binary decision diagram(BDD)and Monte-Carlo simulation is presented to evaluate the complex system behavior and reliability of the k-out-of-n system.A current stabilizing system that consists of a 3-out-of-6 subsystem with FM propagation effect is presented as a case to illustrate the complex behavior and to verify the applicability of the proposed method.Due to the coupling effect change,the main mechanism and failure mode will be changed,and the system lifetime is shortened.Reasons are analyzed and results show that different sensitivity factors of three different FMs lead to the change of the development rate,thus changing the failure scenario.Neglecting the coupling effect may lead to an incomplete and ineffective measuring and monitoring plan.Design strategies must be adopted to make the FM propagation insensitive to load-sharing effect.

Mechanical Modeling of Dike Propagation: Methods, Recent Results and Links to Geophysics

Magma is transported in brittle rock by diking.Diking plays a key role in tectonic phenomena such as continental rifting and plate divergence at mid-ocean ridges.In spite of the importance of understanding how magma is

Vibration-assisted material damage mechanism:From indentation cracks to scratch cracks

Vibration-assisted grinding is one of the most promising technologies for manufacturing optical components due to its efficiency and quality advantages.However,the damage and crack propagation mechanisms of materials in vibration-assisted grinding are not well understood.In order to elucidate the mechanism of abrasive scratching during vibration-assisted grinding,a kinematic model of vibration scratching was developed.The influence of process parameters on the evolution of vibration scratches to indentation or straight scratches is revealed by displacement metrics and velocity metrics.Indentation,scratch and vibration scratch experiments were performed on quartz glass,and the results showed that the vibration scratch cracks are a combination of indentation cracks and scratch cracks.Vibration scratch cracks change from indentation cracks to scratch cracks as the indenter moves from the entrance to the exit of the workpiece or as the vibration frequency changes from high to low.A vertical vibration scratch stress field model is established for the first time,which reveals that the maximum principal stress and tensile stress distribution is the fundamental cause for inducing the transformation of the vibration scratch cracking system.This model provides a theoretical basis for understanding of the mechanism of material damage and crack propagation during vibration-assisted grinding.

FORMATION MECHANISM AND PROPAGATION CHARACTERISTICS OF THE EQUATORIAL THERMALLY-FORCED SHORT-TERM CLIMATIC OSCILLATION DURING THE NORTHERN SUMMER

In this study, in order to investigate the global climatic oscillations forced by sea surface temperature (SST) anomalies over equatorial central-eastern Pacific, two numerical schemes with different SST distri-butions (normal and anomalous cases) are tested by using a nine-layer global spectral model. Experiment results show that (i) in northern summer, a wave train that is similar to the teleconnection pattern suggested by Nitta (1987) and Huang (1987) in the Northern Hemisphere and another one in the Southern Hemisphere are reproduced; (ii) simulated results suggest that the response of atmosphere in middle-high latitudes of both hemispheres to an anomalous heating source is more sensitive in tropical western Pacific than in equatorial central-eastern Pacific; and (iii) in northern summer, the formation of low-frequency oscillations on monthly (seasonal) time scale results from energy dispersion as well as interactions between eddies and zonal flow; and between eddies.

A cluster-based analysis of propagation characteristics in MIMO relay channels based on wideband measurement

In this paper, the characteristics of clusters induced by a variety of propagation mechanisms in the link from the relay station （RS） to the mobile station （MS） are presented. Based on the results of high resolution channel parameter estimation, an automatic framework integrated with the manual intervention is utilized to perform the cluster identification and tracking. The power proportion and angular spread of clusters are investigated in both the line-of-sight （LOS） and non-line-of-sight （NLOS） scenarios. The measurement results indicate that the channel characteristics of clusters are different from the link from the base station to the MS due to the lower height of the RS antennas.

Numerical and Experimental Investigation on Heat PropagationThrough Composite Sinter Bed With Non-Uniform Voidage:Part Ⅱ Prediction of Process Efficiency

The results of numerical simulation of the mosaic embedding iron ore sintering （MEBIOS） process according to the model presented in the first part of the study are introduced. The main objective of the second part is the elucidation of key factors influencing the process efficiency, particularly the sintering completeness, velocity of the heat wave propagation and maximum temperature achievable in the pellet during the wave propagation. Numerical results reveal that the mass fraction of coal, diameter of coal particles and air inlet velocity are of prime importance in determining efficiency of the MEBIOS sintering process.