Numerical and Experimental Analysis of A Ducted Propeller Designed by A Fully Automated Optimization Process Under Open Water Condition

A fully automated optimization process is provided for the design of ducted propellers under open water conditions, including 3D geometry modeling, meshing, optimization algorithm and CFD analysis techniques. The developed process allows the direct integration of a RANSE solver in the design stage. A practical ducted propeller design case study is carried out for validation. Numerical simulations and open water tests are fulfilled and proved that the optimum ducted propeller improves hydrodynamic performance as predicted.

Propeller Design for an Autonomous Underwater Vehicle by the Lifting-line Method based on OpenProp and CFD

A high-efficiency propeller can enable a long mission duration for autonomous underwater vehicles(AUVs).In this study,a new method with OpenProp coupled with computational fluid dynamics was developed to design a propeller for an Explorer100 AUV.The towed system simulation of the AUV was used to measure the nominal wake,and a self-propulsion simulation was used to measure the effective wake at the disc plane just in front of a propeller.Two propellers referring to the nominal wake(propeller 1)and effective wake(propeller 2)were designed with OpenProp and appended with the AUV for self-propulsion simulations,respectively.Through the numerical simulation of the AUV self-propulsion tests,the cruising velocity of AUV was obtained.The flow characteristics of the self-propulsion in pressure and velocity contours were also analyzed.The propeller designed with an effective wake improved the thrust,velocity,and efficiency by approximately 11.3%,6.7%,and 2.5%,respectively,as compared with those with a nominal wake.The cruising velocity of the final designed propeller for the Explorer100 AUV improved by 21.8%,as compared to that of the original propeller from the AUV free-running tests.

The Conceptual Design Experience of Sea-Going Ships with Alternative Propulsion System, Equipped with Dual-Mode Contra Propeller

The paper presents a technical solution which provides energy saving at full speed, as well as duplication of screw propeller and main propulsion system incase it＇s out of order. The description of the corresponding device, designed for transport refrigerator ship, is shown as well as its location on board. Value of energy saving from the use of contra propeller is estimated. The results of the assessment required power to move the ship at low speed by the action of the contra propeller operating in the reactive mode are demonstrated. It is shown, that the ship equipped with the proposed device will get the additional class notation related to the redundancy or duplication of the propulsion system of Russian Maritime Register of Shipping.

Analysis of Roadbed Pavement Designs for Highway Reconstruction and Upgrading

This paper focuses on the route and roadbed pavement design in highway reconstruction and upgrading projects.It discusses the importance of project design for highway reconstruction and upgrading,highlighting key aspects of route design and roadbed pavement design.The analysis reveals that the main design considerations in these projects include controlling factors of route reconstruction,expansion,and upgrading,as well as route plan design and longitudinal section design combined with roadbed pavement.In roadbed pavement design,it is crucial for designers to thoroughly collect existing data and make reasonable use of the current roadbed and pavement to develop a comprehensive design scheme.This analysis aims to provide a reference for the reasonable design of such projects.

Web Layout Design of Large Cavity Structures Based on Topology Optimization

Large cavity structures are widely employed in aerospace engineering, such as thin-walled cylinders, blades andwings. Enhancing performance of aerial vehicles while reducing manufacturing costs and fuel consumptionhas become a focal point for contemporary researchers. Therefore, this paper aims to investigate the topologyoptimization of large cavity structures as a means to enhance their performance, safety, and efficiency. By usingthe variable density method, lightweight design is achieved without compromising structural strength. Theoptimization model considers both concentrated and distributed loads, and utilizes techniques like sensitivityfiltering and projection to obtain a robust optimized configuration. The mechanical properties are checked bycomparing the stress distribution and displacement of the unoptimized and optimized structures under the sameload. The results confirm that the optimized structures exhibit improved mechanical properties, thus offering keyinsights for engineering lightweight, high-strength large cavity structures.

水田动力底盘逆向建模与质心验证——基于Geomagic Design X

针对目前农业机械仿真和优化模型精度不高的问题,提出了一种构建精确模型的逆向建模方法。应用光学扫描仪采集点云数据,基于Geomagic Design X处理点云数据并重构零部件模型,在SolidWorks中完成水田动力底盘的装配。以VP6D-CQ型水田动力底盘为例,将测得的实际质心位置与所建的模型质心位置进行比较,并对提出的逆向建模方法进行了试验验证以及误差分析。结果表明:总质量、x坐标、y坐标、z坐标的误差值分别为4.55%、3.62%、2.23%、4.81%,误差值均在5%内。此方法可构建准确的三维模型,为后续仿真优化数据精确性奠定了基础,与传统的研发相比较,可缩短农业机械研发周期、降低设计成本。

App Designer辅助教学方法探索与实践——以软件无线电课程为例

软件无线电作为通信学科的必修课程,具有承上启下的重要作用。因课程原理抽象、理论公式复杂,学员在学习过程存在理解掌握难、实践应用难等问题。通过对当前软件无线电教学过程中存在的不足与困难进行分析,提出利用MATLAB App Designer辅助课程教学,从教学准备、课堂互动、自主实验、反馈提升四个方面开展课程教学改革。实践表明,该方法对于提升学员的工程思维、系统思维具有显著效果,同时可以增强学员理论联系实际的能力。

A Comparative Study of Metaheuristic Optimization Algorithms for Solving Real-World Engineering Design Problems

Real-world engineering design problems with complex objective functions under some constraints are relatively difficult problems to solve.Such design problems are widely experienced in many engineering fields,such as industry,automotive,construction,machinery,and interdisciplinary research.However,there are established optimization techniques that have shown effectiveness in addressing these types of issues.This research paper gives a comparative study of the implementation of seventeen new metaheuristic methods in order to optimize twelve distinct engineering design issues.The algorithms used in the study are listed as:transient search optimization(TSO),equilibrium optimizer(EO),grey wolf optimizer(GWO),moth-flame optimization(MFO),whale optimization algorithm(WOA),slimemould algorithm(SMA),harris hawks optimization(HHO),chimp optimization algorithm(COA),coot optimization algorithm(COOT),multi-verse optimization(MVO),arithmetic optimization algorithm(AOA),aquila optimizer(AO),sine cosine algorithm(SCA),smell agent optimization(SAO),and seagull optimization algorithm(SOA),pelican optimization algorithm(POA),and coati optimization algorithm(CA).As far as we know,there is no comparative analysis of recent and popular methods against the concrete conditions of real-world engineering problems.Hence,a remarkable research guideline is presented in the study for researchersworking in the fields of engineering and artificial intelligence,especiallywhen applying the optimization methods that have emerged recently.Future research can rely on this work for a literature search on comparisons of metaheuristic optimization methods in real-world problems under similar conditions.

Research on Multi-modal In-Vehicle Intelligent Personal Assistant Design

Intelligent personal assistants play a pivotal role in in-vehicle systems,significantly enhancing life efficiency,driving safety,and decision-making support.In this study,the multi-modal design elements of intelligent personal assistants within the context of visual,auditory,and somatosensory interactions with drivers were discussed.Their impact on the driver’s psychological state through various modes such as visual imagery,voice interaction,and gesture interaction were explored.The study also introduced innovative designs for in-vehicle intelligent personal assistants,incorporating design principles such as driver-centricity,prioritizing passenger safety,and utilizing timely feedback as a criterion.Additionally,the study employed design methods like driver behavior research and driving situation analysis to enhance the emotional connection between drivers and their vehicles,ultimately improving driver satisfaction and trust.

Mid-term outcomes of a kinematically designed cruciate retaining total knee arthroplasty

BACKGROUND Advances in implant material and design have allowed for improvements in total knee arthroplasty(TKA)outcomes.A cruciate retaining(CR)TKA provides the least constraint of TKA designs by preserving the native posterior cruciate ligament.Limited research exists that has examined clinical outcomes or patient reported outcome measures(PROMs)of a large cohort of patients undergoing a CR TKA utilizing a kinematically designed implant.It was hypothesized that the studied CR Knee System would demonstrate favorable outcomes and a clinically significant improvement in pain and functional scores.AIM To assess both short-term and mid-term clinical outcomes and PROMs of a novel CR TKA design.METHODS A retrospective,multi-surgeon study identified 255 knees undergoing a TKA utilizing a kinematically designed CR Knee System(JOURNEY™II CR;Smith and Nephew,Inc.,Memphis,TN)at an urban,academic medical institution between March 2015 and July 2021 with a minimum of two-years of clinical follow-up with an orthopedic surgeon.Patient demographics,surgical information,clinical outcomes,and PROMs data were collected via query of electronic medical records.The PROMs collected in the present study included the Knee Injury and Osteoarthritis Outcome Score for Joint Replacement(KOOS JR)and Patient-Reported Outcomes Measurement Information System(PROMIS■)scores.The significance of improvements in mean PROM scores from preoperative scores to scores collected at six months and two-years postoperatively was analyzed using Independent Samples t-tests.RESULTS Of the 255 patients,65.5%were female,43.8%were White,and patients had an average age of 60.6 years.Primary osteoarthritis(96.9%)was the most common primary diagnosis.The mean surgical time was 105.3 minutes and mean length of stay was 2.1 d with most patients discharged home(92.5%).There were 18 emergency department(ED)visits within 90 d of surgery resulting in a 90 d ED visit rate of 7.1%,including a 2.4%orthopedic-related ED visit rate and a 4.7%non-orthopedic-related ED visit rate.There were three(1.2%)hospital readmissions within 90 d postoperatively.With a mean time to latest follow-up of 3.3 years,four patients(1.6%)required revision,two for arthrofibrosis,one for aseptic femoral loosening,and one for peri-prosthetic joint infection.There were significant improvements in KOOS JR,PROMIS Pain Intensity,PROMIS Pain Interference,PROMIS Mobility,and PROMIS Physical Health from preoperative scores to six month and two-year postoperative scores.CONCLUSION The evaluated implant is an effective,novel design offering excellent outcomes and low complication rates.At a mean follow up of 3.3 years,four patients required revisions,three aseptic and one septic,resulting in an overall implant survival rate of 98.4%and an aseptic survival rate of 98.8%.The results of our study demonstrate the utility of this kinematically designed implant in the setting of primary TKA.

A Study on the Influence of Patterned Logo Design on Brand Image-Focused on the Li Ning Brand

In today’s flood of information,people mainly rely on visual information to recognize brands.Pattern logo design is a representative brand image and directly affects consumers’brand impression and perception.The purpose of this study is to examine the characteristics of the Li Ning brand and the effect of pattern logo design on the brand image.Specifically,it is to provide practical guidelines for brand management and design by analyzing the effects on brand perception,emotional connection,and consumer behavior.For the scope of the study,seven brands are selected for analysis of famous brand cases at home and abroad.The research method is to design a patterned logo suitable for brand characteristics through literature review,empirical research,and detailed analysis of the overall style characteristics of the current Li Ning brand.The research content first analyzes the role of pattern logo design in terms of brand perception,brand perception,and brand sensitivity.Subsequently,the evolution and effect of the Li Ning brand in logo design are examined,and details are discussed in combination with the color and shape of the logo pattern.Finally,by presenting some suggestions and optimized design plans that fit the characteristics and trends of the Li Ning brand,the brand image and market competitiveness can be improved.According to the research results,first,the color,shape,and other factors of brand pattern logo design are closely related to brand image.Second,pattern logo design has a significant influence on consumer attitudes and purchase intentions.Third,consumers are more interested in the design of a patterned logo with high brand awareness.This study has a certain significance in that it reveals the mechanism by which pattern logo design affects brand image and provides useful ideas and suggestions for brand design and marketing.

The Intersection of Privacy by Design and Behavioral Economics: Nudging Users towards Privacy-Friendly Choices

This paper conducts a comprehensive review of existing research on Privacy by Design (PbD) and behavioral economics, explores the intersection of Privacy by Design (PbD) and behavioral economics, and how designers can leverage “nudges” to encourage users towards privacy-friendly choices. We analyze the limitations of rational choice in the context of privacy decision-making and identify key opportunities for integrating behavioral economics into PbD. We propose a user-centered design framework for integrating behavioral economics into PbD, which includes strategies for simplifying complex choices, making privacy visible, providing feedback and control, and testing and iterating. Our analysis highlights the need for a more nuanced understanding of user behavior and decision-making in the context of privacy, and demonstrates the potential of behavioral economics to inform the design of more effective PbD solutions.

Innovative Techniques Unveiled in Advanced Sheet Pile Curtain Design

This thorough review explores the complexities of geotechnical engineering, emphasizing soil-structure interaction (SSI). The investigation centers on sheet pile design, examining two primary methodologies: Limit Equilibrium Methods (LEM) and Soil-Structure Interaction Methods (SSIM). While LEM methods, grounded in classical principles, provide valuable insights for preliminary design considerations, they may encounter limitations in addressing real-world complexities. In contrast, SSIM methods, including the SSI-SR approach, introduce precision and depth to the field. By employing numerical techniques such as Finite Element (FE) and Finite Difference (FD) analyses, these methods enable engineers to navigate the dynamics of soil-structure interaction. The exploration extends to SSI-FE, highlighting its essential role in civil engineering. By integrating Finite Element analysis with considerations for soil-structure interaction, the SSI-FE method offers a holistic understanding of how structures dynamically interact with their geotechnical environment. Throughout this exploration, the study dissects critical components governing SSIM methods, providing engineers with tools to navigate the intricate landscape of geotechnical design. The study acknowledges the significance of the Mohr-Coulomb constitutive model while recognizing its limitations, and guiding practitioners toward informed decision-making in geotechnical analyses. As the article concludes, it underscores the importance of continuous learning and innovation for the future of geotechnical engineering. With advancing technology and an evolving understanding of soil-structure interaction, the study remains committed to ensuring the safety, stability, and efficiency of geotechnical structures through cutting-edge design and analysis techniques.

Practice Exploration of Green Building Design in Prefabricated Residential Building Design

Prefabricated residential building design fully embodies the concept of green building and aligns with China’s strategic plan for sustainable development.However,there is a need to further optimize green building design methods,enhance the design quality of prefabricated residential buildings,and improve energy and resource utilization.Compared to traditional construction methods,prefabricated residential building design still faces several challenges during the actual construction process.These challenges include difficulties in design,material selection and processing,and the high demands for construction coordination.To strengthen the application of green building concepts in prefabricated residential design and effectively promote the sustainable development of the construction industry,this paper discusses practical measures for implementing green building design in prefabricated residential projects for reference.

Application Strategy of Composite Steel Composite Beams in Bridge Design

The combined prefabricated steel-hybrid stacked girder structure is very common in modern bridge design.An actual bridge engineering design project is taken as an example in this paper to analyze the application strategy of this structure,encompassing overall design strategy,structural design strategy,and structural calculation strategy.The aim is to offer insights that can enhance the quality of bridge design.

Practice and Exploration of Ideological and Political Teaching in Landscape Design Courses for Environmental Design Majors

To implement the fundamental goal of moral education,based on the teaching practice of landscape design courses,we explore how to integrate value shaping,knowledge transfer,and skill cultivation in the teaching links of landscape design courses in environmental design majors,such as selecting design topics,assigning tasks,researching projects,designing works,designing explanations,and defense.

Headwear design:Relationship between the headwear and the overall styling

This article examines the relationship between headwear design and overall clothing styling,emphasizing the importance of headwear in conveying personal style and cultural identity.It traces the evolution of Chinese and Western headwear throughout history,highlighting the interplay between headwear and the wearer's personal charac-teristics,life events,and cultural background.The article concludes by emphasizing that headwear design is not only a reflection of fashion,but also a manifestation of cultural depth and individuality.

Overall Selection Design Based on the Mega Highway Bridge Project

In the continuous development of the modern highway and bridge engineering industry,the reasonable selection of mega highway bridges and their design is crucial.Based on this,this paper takes the actual bridge project as an example,and analyses the overall selection design of such highway bridges,including the basic overview of the project,the basic selection principle of mega highway bridge project structure and its design strategy,etc.,to provide scientific reference for its selection design.

Application Strategies of Modular Design in Assembled Teaching Buildings

As an efficient,environmentally friendly,energy-saving construction method,assembled buildings are now widely used in campus building construction.Modular design thinking is system-based design thinking,and its application to the design of an assembled teaching building project will comprehensively improve the rationality of the teaching building and component design.The paper focuses on the application of modular design thinking in assembled teaching building design,aiming to provide references for China’s architectural design units,giving full play to the advantages of modular design thinking in future teaching building design projects,and enhancing the level of design,for the construction of the teaching building and the basis of the technical guarantee.

Accelerated design of high-performance Mg-Mn-based magnesium alloys based on novel bayesian optimization

Magnesium(Mg),being the lightest structural metal,holds immense potential for widespread applications in various fields.The development of high-performance and cost-effective Mg alloys is crucial to further advancing their commercial utilization.With the rapid advancement of machine learning(ML)technology in recent years,the“data-driven''approach for alloy design has provided new perspectives and opportunities for enhancing the performance of Mg alloys.This paper introduces a novel regression-based Bayesian optimization active learning model(RBOALM)for the development of high-performance Mg-Mn-based wrought alloys.RBOALM employs active learning to automatically explore optimal alloy compositions and process parameters within predefined ranges,facilitating the discovery of superior alloy combinations.This model further integrates pre-established regression models as surrogate functions in Bayesian optimization,significantly enhancing the precision of the design process.Leveraging RBOALM,several new high-performance alloys have been successfully designed and prepared.Notably,after mechanical property testing of the designed alloys,the Mg-2.1Zn-2.0Mn-0.5Sn-0.1Ca alloy demonstrates exceptional mechanical properties,including an ultimate tensile strength of 406 MPa,a yield strength of 287 MPa,and a 23%fracture elongation.Furthermore,the Mg-2.7Mn-0.5Al-0.1Ca alloy exhibits an ultimate tensile strength of 211 MPa,coupled with a remarkable 41%fracture elongation.