Fractional Order Proportional Integral Derivative Controller Design and Simulation for Bioengineering Systems

This paper deals with the study of fractional order system tuning method based on Factional Order Proportional Integral Derivative( FOPID) controller in allusion to the nonlinear characteristics and fractional order mathematical model of bioengineering systems. The main contents include the design of FOPID controller and the simulation for bioengineering systems. The simulation results show that the tuning method of fractional order system based on the FOPID controller outperforms the fractional order system based on Fractional Order Proportional Integral( FOPI) controller. As it can enhance control character and improve the robustness of the system.

广义预测控制和PID控制在混凝投药中的应用

针对水处理过程中混凝投药的非线性和时滞特点,分析了其混凝投药的工作原理,采用传统的控制方法难以实现很好的控制效果.提出了一个混凝投药的方案,把广义预测控制算法和PID(proportion-integralderivative)控制算法结合起来,通过预测被控系统的若干个时刻的未来输出值,得到一个新的性能优化函数,通过实时优化被控对象的控制参数,计算出一个合理的混凝投药量.最后,采用Visual Basic软件编程完成该控制方案,并通过对混凝投药自动化控制的现场实验,得到较好的输出控制结果,从而验证了该控制方案的可行性.

CONTROL OF ROBOT DRIVEN BY MULTIPLE ULTRASONIC MOTORS BASED ON ROBUST PARAMETER DESIGN

An ultrasonic motor （USM） is difficlt to be mathematically described because of its complex energy conversion and nonlinear parameters from increasing temperature and changing operating conditions. To achieve good performance of a three-joint robot directly driven by USM, according to the operating characteristics of USM, a new position-velocity feedback control strategy is proposed. In the control strategy, there are a total of 18 controller gains to he tuned. Through a series of ＂Design of Experiments＂ by the robust parameter design, an optimal and robust set of proportional integral derivative （PID） controller gains is obtained. Results show that the control strategy can achieve the best performance of the robot and the robust parameter design is effective and convenient to USMs.

船用汽轮机变工况的遗传粒子群优化智能控制方法研究

为提升船用汽轮发电机组大幅变工况时的控制精度和鲁棒性,以船用汽轮机调节系统各部件的模块化数学模型为基础,建立汽轮机组数字电液(digital electric hydraulic,DEH)闭环模糊比例、积分、微分(proportion integration derivative,PID)控制模型;融合遗传算法的选择、交叉、变异和自适应递减权重法,提出遗传粒子群智能优化算法,并结合标准测试函数验证提出算法具有较高的收敛速度和精度;基于遗传粒子群智能优化算法建立汽轮机变工况自适应智能模糊PID控制模型,实现模糊PID的量化因子与比例因子最优化设计,进而开展船用汽轮发电机组大幅变工况动态特性及扰动因素影响分析,结果表明本文建立的自适应智能模糊PID控制模型具有更好的控制稳态性能与鲁棒性,为船用汽轮机组大幅度变工况智能控制优化设计提供了有力的技术支撑。

Improved single-neuron PID controller for DC motor applied in robot system

An improved single-neuron proportional integral derivative （ PID ） controller and a new method to build the DC motor system were presented in the article. In the simulation, the robot arm is considered as an external load to DC motor. Both the motor module and the load module are crea- ted in Simulink to achieve simulation results closer to real robot system. In this way, it can well veri- fy the performance of the improved single-neuron PID controller, which is a combined controller of normal PID controller and single-neuron PID controller. Besides, an intelligent switcher can help to realize the function of choosing a better control algorithm according to motor＇ s velocity output. Sim- ulated results confirm the rapid and stable response of the improved PID controller. Moreover, the improved single-neuron PID controller has an excellent ability to overcome the load impact and su- press the jamming signals. At last, a GUI interface platform is built to make the controller easier to be applied in other robot systems.

PSO Based Multi-Objective Approach for Controlling PID Controller

CSTR(Continuous stirred tank reactor)is employed in process control and chemical industries to improve response characteristics and system efficiency.It has a highly nonlinear characteristic that includes complexities in its control and design.Dynamic performance is compassionate to change in system parameterswhich need more effort for planning a significant controller for CSTR.The reactor temperature changes in either direction from the defined reference value.It is important to note that the intensity of chemical actions inside the CSTR is dependent on the various levels of temperature,and deviation from reference values may cause degradation of biomass quality.Design and implementation of an appropriate adaptive controller for such a nonlinear system are essential.In this paper,a conventional Proportional Integral Derivative(PID)controller is designed.The conventional techniques to deal with constraints suffer severe limitations like it has fixed controller parameters.Hence,A novel method is applied for computing the PID controller parameters using a swarm algorithm that overcomes the conventional controller’s limitation.In the proposed technique,PID parameters are tuned by Particle Swarm Optimization(PSO).It is not easy to choose the suitable objective function to design a PID controller using PSO to get an optimal response.In this article,a multi-objective function is proposed for PSO based controller design of CSTR.

Parallel Fuzzy P+Fuzzy I+Fuzzy D Controller:Design and Performance Evaluation

In this paper, a parallel fuzzy proportional plus fuzzy integral plus fuzzy derivative （FP＋FI＋FD） controller is proposed. It is derived from the conventional parallel proportional-integral-derivative （PID） controller. It preserves the linear structure of a conventional parallel PID controller, with analytical formulas. The final shape of the controller is a discrete-time fuzzy version of a conventional parallel PID controller. Computer simulations are performed to evaluate the performance of the FP＋FI＋FD controller for setpoint tracking and load-disturbance rejection for some complex processes, such as first- and second-order processes with delay, inverse response process with and without delay and higher order processes. Also, the performance of the proposed fuzzy controller is evaluated experimentally on highly nonlinear liquid-flow process with a hysteresis characteristic due to a pneumatic control valve. The simulation and real time control is done using National InstrumentTM hardware and software （LabVIEWTM）. The response of the FP＋FI＋FD controller is compared with the conventional parallel PID controller, tuned with the Ziegler-Nichols （Z-H） and /~strSm- H^gglund （A-H） tuning technique. It is observed that the FP＋FI＋FD controller performed much better than the conventional PI/PID controller. Simulation and experimental results demonstrate the effectiveness of the proposed parallel FP＋FI＋FD controller.

模糊PID复合控制在超精密工作台控制系统中的应用

基于模糊控制算法与PID(proportion-integral-derivative)控制算法的优缺点,提出将模糊PID复合控制算法应用于超精密工作台控制系统中,它结合了2种控制算法的优点,分段对工作台实施控制。并且对此控制系统进行了Matlab仿真,仿真结果表明该控制方法能使系统达到良好的控制效果。

Simulation study on starting of dual clutch transmission for tracked vehicles

In order to study the application of dual clutch transmission （DCT） on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existing tracked vehicle, a DCT structure was proposed. Matlab/Simulink was a dopted as a platform to develop the simulation model. The engine speed was controlled to follow the target speed as a launch strategy. Two control methods, a proportional integral derivative （ PID ） control method and a fuzzy control method, were proposed to control the engine throttle and oil pressure in order to track the target engine speed. Simulation results show that either the PID control or fuzzy control method can improve the starting performance compared with no loop control meth od. Fuzzy control method can lead a better starting quality compared with PID control method.

Performance analysis of semi-active cab’s hydraulic system of the vibratory roller using optimal fuzzy-PID control

In order to evaluate the performance of semi-active cab’s hydraulic mounts(SHM)of the off-road vibratory roller with the optimal fuzzy-PID(proportional integral derivative)control,a nonlinear dynamic model of the vehicle interacting with off-road terrains is established based on Matlab/Simulink software.The weighted root-mean-square(RMS)acceleration responses of the driver’s seat heave and the cab’s pitch angle are chosen as objective functions.The SHM is then optimized and analyzed via the optimal fuzzy-PID control under different operation conditions.The simulations results show that the driver’s ride comfort and the cab shaking are greatly affected by the off-road terrains under various operating conditions of the vehicle,especially at the speed from 8 to 12 km/h on a very poor terrain surface of Grenville soil ground under the vehicle travelling.With SHM using the optimal fuzzy-PID control,the driver’s ride comfort and the cab shaking are clearly improved under various operation conditions of the vehicle,particularly at the speed from 6 to 7 km/h of the vehicle traveling.

CAutoCSD-Evolutionary Search and Optimisation Enabled Computer Automated Control System Design

This paper attempts to set a unified scene for various linear time-invariant (LTI) control system design schemes, by transforming the existing concept of “computer-aided control system design” (CACSD) to novel “computer-automated control system design” (CAutoCSD). The first step towards this goal is to accommodate, under practical constraints, various design objectives that are desirable in both time and frequency domains. Such performance-prioritised unification is aimed at relieving practising engineers from having to select a particular control scheme and from sacrificing certain performance goals resulting from pre-commitment to such schemes. With recent progress in evolutionary computing based extra-numeric, multi-criterion search and optimisation techniques, such unification of LTI control schemes becomes feasible, analytical and practical, and the resultant designs can be creative. The techniques developed are applied to, and illustrated by, three design problems. The unified approach automatically provides an integrator for zero-steady state error in velocity control of a DC motor, and meets multiple objectives in the design of an LTI controller for a non-minimum phase plant and offers a high-performance LTI controller network for a non-linear chemical process.

Some Investigations on Hybrid Fuzzy IPD Controllers for Proportional and Derivative Kick Suppression

Proportional and derivative kick i.e., a large change in control action of a proportional plus integral plus derivative （PID） controller due to a sudden change in reference set-point is generally undesired in process industry. Therefore, the structure of conventional parallel PID controller is modified to integral minus proportional derivative （I-PD） controller. In this paper, three hybrid fuzzy IPD controllers such as a fuzzy I-fuzzy PD （FI-FPD） controller and its hybrid combinations with its conventional counterpart such as fuzzy I-PD （FI-PD） and I-fuzzy PD （I-FPD） are presented in view of above industrial problem. These controllers are based upon the counterpart conventional I-PD controller and contains analytical formulae. Computer simulations are carried out to evaluate the performance of hybrid fuzzy controllers along with conventional I-PD and PID controllers for set-point tracking and disturbance rejection for an induction motor in closed loop using LabVIEWTM environment. The gains of conventional and hybrid fuzzy controllers are tuned using genetic algorithm （GA） for minimum overshoot and settling time. It has been observed that hybrid fuzzy controllers along with the conventional I-PD controller significantly remove the kick from the control action in reference set-point tracking. However, in disturbance rejection, I-PD and FI-PD controllers fail to eliminate the kick from the control signal. In contrast, FI-FPD and I-FPD controllers considerably reduced spikes from the control action in disturbance rejection. Among the conventional and hybrid fuzzy IPD controllers, FI--FPD demonstrates much better set-point tracking and disturbance rejection response with spike free control action.

Trajectory tracking control of the bionic joint of the musculoskeletal leg mechanism

Pneumatic artificial muscles(PAMs) have properties similar to biological muscles,which are widely used in robotics as actuators.It is difficult to achieve high-precision position control for robotics system driven by PAMs.A 3-DOF musculoskeletal bionic leg mechanism is presented,which is driven by PAMs for quadruped robots.PAM is used to simulate the compliance of biological muscle.The kinematics of the leg swing is derived,and the foot desired trajectory is planned as the sinusoidal functions.The swing experiments of the musculoskeletal leg mechanism are conducted to analyse the extension and flexion of joints.A proportional integral derivative(PID) algorithm is presented for controlling the flexion/extension of the joint.The trajectory tracking results of joints and the PAM gas pressure are obtained.Experimental results show that the developed leg mechanism exhibits good biological properties.

Research on Stick-Slip Vibration Suppression Method of Drill String Based on Machine Learning Optimization

During the drilling process,stick-slip vibration of the drill string is mainly caused by the nonlinear friction gen-erated by the contact between the drill bit and the rock.To eliminate the fatigue wear of downhole drilling tools caused by stick-slip vibrations,the Fractional-Order Proportional-Integral-Derivative(FOPID)controller is used to suppress stick-slip vibrations in the drill string.Although the FOPID controller can effectively suppress the drill string stick-slip vibration,its structure isflexible and parameter setting is complicated,so it needs to use the cor-responding machine learning algorithm for parameter optimization.Based on the principle of torsional vibration,a simplified model of multi-degree-of-freedom drill string is established and its block diagram is designed.The continuous nonlinear friction generated by cutting rock is described by the LuGre friction model.The adaptive learning strategy of genetic algorithm(GA),particle swarm optimization(PSO)and particle swarm optimization improved(IPSO)by arithmetic optimization(AOA)is used to optimize and adjust the controller parameters,and the drill string stick-slip vibration is suppressed to the greatest extent.The results show that:When slight drill string stick-slip vibration occurs,the FOPID controller optimized by machine learning algorithm has a good effect on suppressing drill string stick-slip vibration.However,the FOPID controller cannot get the drill string system which has fallen into serious stick-slip vibration(stuck pipe)out of trouble,and the machine learning algorithm is required to mark a large amount of data on adjacent Wells to train the model.Set a reasonable range of drilling parameters(weight on bit/drive torque)in advance to avoid severe stick-slip vibration(stuck pipe)in the drill string system.

Automatic measurement of air-pressure sensor based on two-pressure control instrument

To measure the performance of high precision air-pressure sensors in below normal pressure,an automatic measurement instrument has been designed and implemented.It can simulate environment of low pressure from 300hPa to 1 000hPa with high accuracy by proportional-integral-derivative(PID)control quickly,and it can also generate various relative humidity by two-pressure control.The results show that this instrument can reach controlled pressure quickly.And it works well with the minimum average pressure difference,and the fluctuation is±0.02hPa at 500hPa.And it can keep in a stable status for a long time.It works well in performance testing of pressure sensors.The structure of the system is simple,takes small investment,and can be operated conveniently.

Strategy for Controlling the Level in a Dissolved Air Flotation Chamber

The aim of the present study was to implant an efficient strategy for controlling the level of the effluent-oily foam interface in a DAF （dissolved air flotation） chamber of a pilot-scale prototype. DAF has been successfully used in the treatment of oily water, which is one of the main environmental problems in different industrial facilities. Along with important operational parameters, such as microbubble size and flow rate, the control strategy for the automation of a DAF chamber may be an important tool for increasing efficiency. Controlling the level was the strategy chosen to enhance the separation efficiency in a pilot-scale DAF prototype, with monitoring performed using a computational program in LabVIEW （laboratory virtual instrument engineering workbench）. The findings demonstrate that it is possible to maintain the level of the fluid at a reference value established by the operator using the software program through the application of classic proportional integral derivative controllers. Using this control tool, the efficiency of water-oil separation in the pilot flotation chamber prototype was increased to nearly 98%.

Digital Control Design for the Boiler Drum BDT921

A boiler drum BDT921 that is installed in the Control Laboratory, Department of Mechatronics and Robotics Engineering, Faculty of Electric and Electronic Engineering, Universiti Tun Hussein Onn Malaysia （UTHM） is being used as a model plant to achieve the digital control system since its analog. Implementing a digital system to boiler quite a though work. This paper covers analysis from the experiment done to match with digital design that will be implemented to the real system. The digital control design will come up with the mathematical model and will be analyzed with MATLAB and SIMULINK software named as ＂Discrete Analysis ofBDT921 Simulation＂. A proportional integral and derivative （PID） controller is being chosen as the control element in discrete form as the real system is using the same control element. The output responses behave as the second order system with a bit difference in rise times and peak times compared with data obtained from experiment. With regarding to the analysis done, the digital control can be implemented and for further viewing, to be controlled digitally with computer in the control room.

Multi‐feature fusion and memory‐based mobile robot target tracking system

In crowded settings,mobile robots face challenges like target disappearance and occlusion,impacting tracking performance.Despite existing optimisations,tracking in complex environments remains insufficient.To address this issue,the authors propose a tailored visual navigation tracking system for crowded scenes.For target disappearance,an autonomous navigation strategy based on target coordinates,utilising a path memory bank for intelligent search and re‐tracking is introduced.This significantly enhances tracking success.To handle target occlusion,the system relies on appearance features extracted by a target detection network and a feature memory bank for enhanced sensitivity.Servo control technology ensures robust target tracking by fully utilising appearance information and motion characteristics,even in occluded scenarios.Comprehensive testing on the OTB100 dataset validates the system's effectiveness in addressing target tracking challenges in diverse crowded environments,affirming algorithm robustness.

Design of an Executable ANFIS-based Control System to Improve the Attitude and Altitude Performances of a Quadcopter Drone

Nowadays,quadcopters are presented in many life applications which require the performance of automatic takeoff,trajectory tracking,and automatic landing.Thus,researchers are aiming to enhance the performance of these vehicles through low-cost sensing solutions and the design of executable and robust control techniques.Due to high nonlinearities,strong couplings and under-actuation,the control design process of a quadcopter is a rather challenging task.Therefore,the main objective of this work is demonstrated through two main aspects.The first is the design of an adaptive neuro-fuzzy inference system(ANFIS)controller to develop the attitude and altitude of a quadcopter.The second is to create a systematic framework for implementing flight controllers in embedded systems.A suitable model of the quadcopter is also developed by taking into account aerodynamics effects.To show the effectiveness of the ANFIS approach,the performance of a well-trained ANFIS controller is compared to a classical proportional-derivative(PD)controller and a properly tuned fuzzy logic controller.The controllers are compared and tested under several different flight conditions including the capability to reject external disturbances.In the first stage,performance evaluation takes place in a nonlinear simulation environment.Then,the ANFIS-based controllers alongside attitude and position estimators,and precision landing algorithms are implemented for executions in a real-time autopilot.In precision landing systems,an IR-camera is used to detect an IR-beacon on the ground for precise positioning.Several flight tests of a quadcopter are conducted for results validation.Both simulations and experiments demonstrated superior results for quadcopter stability in different flight scenarios.

Control of a 3-RRR Planar Parallel Robot Using Fractional Order PID Controller

3-RRR planar parallel robots are utilized for solving precise material-handling problems in industrial automation applications.Thus,robust and stable control is required to deliver high accuracy in comparison to the state of the art.The operation of the mechanism is achieved based on three revolute(3-RRR)joints which are geometrically designed using an open-loop spatial robotic platform.The inverse kinematic model of the system is derived and analyzed by using the geometric structure with three revolute joints.The main variables in our design are the platform base positions,the geometry of the joint angles,and links of the 3-RRR planar parallel robot.These variables are calcula ted based on Cayley-Menger determinants and bilateration to det ermine the final position of the platform when moving and placing objects.Additionally,a proposed fractional order proportional integral derivative(FOPID)is optimized using the bat optimization algorithm to control the path tracking of the center of the 3-RRR planar parallel robot.The design is compared with the state of the art and simulated using the Matlab environment to validate the effectiveness of the proposed controller.Furthermore,real-time implementation has been tested to prove that the design performance is practical.