Experimental study on integral axial squeeze film damper to suppress longitudinal vibration of propulsion shafting

This paper aims at investigating the effectiveness of squeeze oil film in suppressing the longitudinal vibration of propulsion shaft systems through a novel integral axial squeeze film damper(IASFD).After designing the IASFD,a propulsion shafting test rig for the longitudinal vibration control is built.Longitudinal vibration control experiments of the propulsion shafting are carried out under different magnitude and frequency of the excitation force.The results show that both IASFD elastic support and IASFD elastic damping support have excellent vibration attenuation characteristics,and can effectively suppress the longitudinal vibration of the shaft system in a wide frequency range.However,IASFD elastic damping support has a more significant vibration reduction effect than the other supports,and increasing the damping of the system has obvious effect on reducing the shafting vibration.For an excitation force of 45 N,the maximum reduction of the vibration amplitude is 89.16%.Also,the vibration generated by the resonance phenomenon is also significantly reduced.

Coupling Mathematical Model of Marine Propulsion Shafting in Steady Operating State

According to the analysis of the problems about the operation of marine propulsion shafting in steady state,the geometric and mechanical coupling relationships between marine propulsion shafting and oil film of bearings in two-dimensional space are established,and a coupling mathematical model of the marine propulsion shafting in steady operating state is proposed.Then the simulation of a real ship is carried out,and the variation laws of some special parameters such as bearing load and deflection are obtained.Finally,the results of simulation are verified by experimental data of a real ship,which can provide the mathematical model and analysis method for the research on the characteristics of ship propulsion shafting condition in steady state.

船用推进轴系统扭转和横向振动耦合效应

In this study,the coupled torsional-transverse vibration of a propeller shaft system owing to the misalignment caused by the shaft rotation was investigated.The proposed numerical model is based on the modified version of the Jeffcott rotor model.The equation of motion describing the harmonic vibrations of the system was obtained using the Euler-Lagrange equations for the associated energy functional.Experiments considering different rotation speeds and axial loads acting on the propulsion shaft system were performed to verify the numerical model.The effects of system parameters such as shaft length and diameter,stiffness and damping coefficients,and cross-section eccentricity were also studied.The cross-section eccentricity increased the displacement response,yet coupled vibrations were not initially observed.With the increase in the eccentricity,the interaction between two vibration modes became apparent,and the agreement between numerical predictions and experimental measurements improved.Given the results,the modified version of the Jeffcott rotor model can represent the coupled torsional-transverse vibration of propulsion shaft systems.