PUSH-PULL FACTORS IN MOUNTAIN RESORTS——A Case Study of Huangshan Mountain as World Heritage

The push-pull framework provides a useful approach for examining the tourist motivation. This paper takes the world heritage-Huangshan Mountain as a sample. From the two different aspects of pull and push factors, the underlying features of visitors′ motives to Huangshan Mountain are analyzed with the help of factor analysis. As a result, five push factors and four pull factors are identified. Further analyses investigate differences in the push and pull factors among different socio-demographic subgroups with one-way ANOVA analysis. The result of the study affords us useful references for development, protection and marketing expansion of mountain resorts.

Transumbilical enterostomy for Hirschsprung’s disease with a two-stage laparoscopy-assisted pull-through procedure

BACKGROUND A one-stage laparoscopic operation has recently been considered a favorable option for the management of patients with Hirschsprung's disease(HD)due to its superior cosmetic results.One-stage transanal endorectal pull-through for the treatment of rectosigmoid HD has been widely used in newborns without complications.However,enterostomy is required in some HD cases for enterocolitis and dilated colon.Our transumbilical enterostomy(TUE)and twostage laparoscopy-assisted anorectoplasty were effective and achieved a similar cosmetic effect to one-stage laparoscopy on the abdominal wall in patients with anorectal malformation,but the effect in patients with HD is unclear.AIM To evaluate the safety,efficacy and cosmetic results of TUE in two-stage laparoscopy-assisted pull-through for HD.METHODS From June 2013 to June 2018,53 patients(40 boys,13 girls;mean age at enterostomy:5.5±2.2 mo)who underwent enterostomy and two-stage laparoscopy-assisted pull-through for HD with stoma closure were reviewed at our institution.Two enterostomy approaches were used:TUE in 24 patients,and conventional abdominal enterostomy(CAE)in 29 patients.Eleven patients with rectosigmoid HD had severe preoperative enterocolitis or a dilated colon.26 patients had long-segment HD,and 16 patients had total colonic aganglionosis(TCA).The patients with left-sided HD underwent the two-stage laparoscopic Soave procedure,and the patients with right-sided HD and TCA underwent the laparoscopic Duhamel procedure.Demographics,enterostomy operative time,complications and cosmetic results were respectively evaluated.RESULTS There were no differences between the groups with respect to gender,age at enterostomy,weight and clinical type(P>0.05).No conversion to open technique was required.Two patients experienced episodes of stomal mucosal prolapse in the TUE group and 1 patient in the CAE group(8.33%vs 3.45%,P>0.05).No parastomal hernia was observed in either of the two groups.Wound infection at the stoma was seen in 1 case in the TUE group,and 2 cases in the CAE group(4.17%vs 6.90%,P>0.05).No obstruction was noted in any of the patients in the TUE group,whereas obstruction was found in 1 patient in the CAE group.Enterocolitis was observed in 3 and 5 patients in the TUE and CAE group,respectively(12.50%vs 17.24%,P>0.05).There was no significant difference between the TUE group and CAE group in terms of the incidence of soiling and constipation(P>0.05).The cosmetic result using the scar score in the TUE group was better than that in the CAE group(6.83±0.96 vs 13.32±1.57,P<0.05).CONCLUSION TUE is a safe and feasible method for the treatment of HD,and the staged enterostomy and two-stage laparoscopy-assisted pull-through achieved a similar cosmetic effect to the one-stage laparoscopic procedure.

Microstructure and mechanical properties of friction pull plug welding for2219-T87 aluminum alloy with tungsten inert gas weld

The friction pull plug welding(FPPW)of the 2219-T87 tungsten inert gas(TIG)welded joint was investigated,and the microstructures,precipitate evolution,mechanical properties,and fracture morphologies of this joint were analyzed and discussed.In this study,defectfree joints were obtained using a rotational speed of 7000 r/min,an axial feeding displacement of 12 mm,and an axial force of 20-22 kN.The results indicated that within these welding parameters,metallurgical bonding between the plug and plate is achieved by the formation of recrystallized grains.The microstructural features of the FPPW joint can be divided into different regions,including the heat-affected zone(HAZ),thermomechanically affected zone(TMAZ),recrystallization zone(RZ),heat-affected zone in the TIG weld(TIG-HAZ),and the thermomechanically affected zone in the TIG weld(TIG-TMAZ).In the TIG-TMAZ,the grains were highly deformed and elongated due to the shear and the extrusion that produces the plug during the FPPW process.The main reason for the softening in the TMAZ is determined to be the dissolution ofθ’and coarsening ofθprecipitate particles.In a tensile test,the FPPW joint welded with an axial force of 22 kN showed the highest ultimate tensile strength of 237 MPa.The locations of cracks and factures in the TIG-TMAZ were identified.The fracture morphology of the tensile sample showed good plasticity and toughness of the joints.

Double pull specimen more suitable for measuring bond-slip relationship of FRP-to-concrete interface

A new "conceptual" design named "double pull" specimen was proposed in order to measure the bond-slip(δ-τ) relationship of fiber reinforced polymer(FRP)-to-concrete interface more accurately.A finite element analysis(FEA) was performed for preliminarily evaluating the suitability of the proposed conceptual double pull specimen.Through the FEA,it was indicated that the FRP-to-concrete interface of the proposed conceptual specimen might subject to a much higher load level than that of the most commonly used simple shear specimen,showing a great potential for measuring δ-τ relationship more accurately.In the light of the conceptual specimen,a kind of "practical" double pull specimen was developed and proved to be more suitable for measuring δ-τ relationship through an exploratory experimental study with 20 specimens.Consequently,an experimental program with 10 double pull specimens was performed for measuring the ultimate slip δu which was difficult to capture by using the existing specimens.It is shown that the range of δu is 0.31-0.52 mm based on the test results.The suggestion for improving the measure method is also put forward.

Comparison of the Pull-out Strength Between a Novel Micro-dynamic Pedicle Screw and a Traditional Pedicle Screw by Using Pull Out Test and Micro-CT

Objective To investigate the effectiveness of the micro-dynamic pedicle screw for the prevention of loosening between the screw and bone surface in lumbar spinal fusion.For this evaluation,the peek pull-out force(PPF)after fatigue resistance testing at different cycles and semidiameter of screw insertion area of micro-CT image was compared between the micro-dynamic and traditional pedicle screws.Methods Forty lumbar vertebrae received a traditional pedicle screw on one side and a micro-dynamic pedicle screw on the other side as follows:15 vertebrae underwent instant pull-out testing(group A,traditional vs.group B,micro-dynamic);15 vertebrae underwent pull-out test after 5000-cyclic fatigue loading(group C,traditional vs.group D,micro-dynamic);and 10 vertebrae underwent pull-out test after 10000-cyclic fatigue loading(group E,traditional vs.group F,micro-dynamic).All vertebrae that after fatigue loading were scanned by using micro-ct to check the semidiameter of screw insertion area.The PPF,normalized PPF(PPFn),bone mineral density(BMD)and diameter of screw insertion area were compared between all groups.Results The BMD showed a weak significant correlation with PPF(r=0.252,P=0.024).The PPF in groups A and B(P=0.485),and groups C and D(P=0.184)did not show significant difference.However,the PPF in group F was significantly greater than that measured in group E(P=0.005).The PPFn of groups A,C,and E significantly decreased as the number of cycles increased(P=0.015).Meanwhile,the PPFn of groups B,D,and F remained consistent regardless of the number of cycles(P=0.367). The semidiameter of traditional pedicle screw insertion area was significantly larger than that of micro-dynamic pedicle screw insertion area(P<0.001).Conclusions This study compared the performance of a micro-dynamic pedicle screw versus that of a traditional pedicle screw using pull-out testing and micro-CT.The results showed that the micro-dynamic pedicle screw provides similar resistance in lowcycle fatigue testing and favorable resistance in high-cycle fatigue testing versus the traditional pedicle screw.The micro-dynamic pedicle screw provides stronger fixation stability versus the traditional pedicle screw,especially in high-cyclic fatigue loading condition versus the traditional pedicle screws.

Push vs pull method for endoscopic ultrasound-guided fine needle aspiration of pancreatic head lesions: Propensity score matching analysis

AIM To evaluate the efficacy of endoscopic ultrasoundguided fine needle aspiration(EUS-FNA) of pancreatic head cancer when pushing(push method) or pulling the echoendoscope(pull method).METHODS Overall, 566 pancreatic cancer patients had their first EUS-FNA between February 2001 and December 2017. Among them, 201 who underwent EUS-FNA for pancreatic head lesions were included in this study. EUS-FNA was performed by the push method in 85 patients, the pull method in 101 patients and both the push and pull methods in 15 patients. After propensity score matching(age, sex, tumor diameter, and FNA needle), 85 patients each were stratified into the push and pull groups. Patient characteristics and EUSFNA-related factors were compared between the two groups.RESULTS Patient characteristics were not significantly different between the two groups. The distance to lesion was significantly longer in the push group than in the pull group(13.9 ± 4.9 mm vs 7.0 ± 4.9 mm, P < 0.01). The push method was a significant factor influencing the distance to lesion(≥ median 10 mm)(P < 0.01). Additionally, tumor diameter ≥ 25 mm(OR = 1.91, 95%CI: 1.02-3.58, P = 0.043) and the push method(OR = 1.91, 95%CI: 1.03-3.55, P = 0.04) were significant factors contributing to the histological diagnosis of malignancy.CONCLUSION The pull method shortened the distance between the endoscope and the lesion and facilitated EUS-FNA of pancreatic head cancer. The push method contributed to the histological diagnosis of pancreatic head cancer using EUS-FNA specimens.

Pulling force of acoustic-vortex beams on centered elastic spheres based on the annular transducer model

To solve the difficulty of generating an ideal Bessel beam,an simplified annular transducer model is proposed to study the axial acoustic radiation force(ARF)and the corresponding negative ARF(pulling force)exerted on centered elastic spheres for acoustic-vortex(AV)beams of arbitrary orders.Based on the theory of acoustic scattering,the axial distributions of the velocity potential and the ARF for AV beams of different orders generated by the annular transducers with different physical sizes are simulated.It is proved that the pulling force can be generated by AV beams of arbitrary orders with multiple axial regions.The pulling force is more likely to exert on the sphere with a smaller k0a(product of the wave number and the radius)for the AV beam with a bigger topological charge due to the strengthened off-axis acoustic scattering.The pulling force decreases with the increase of the axial distance for the sphere with a bigger k0a.More pulling force areas with wider axial regions can be formed by AV beams using a bigger-sized annular transducer.The theoretical results demonstrate the feasibility of generating the pulling force along the axes of AV beams using the experimentally applicable circular array of planar transducers,and suggest application potentials for multi-position stable object manipulations in biomedical engineering.

Static and Dynamic Pull-In Instability of Nano-Beams Resting on Elastic Foundation Based on the Nonlocal Elasticity Theory

This paper provides the static and dynamic pullin behavior of nano-beams resting on the elastic foundation based on the nonlocal theory which is able to capture the size effects for structures in micron and sub-micron scales. For this purpose, the governing equation of motion and the boundary conditions are driven using a variational approach. This formulation includes the influences of fringing field and intermolecular forces such as Casimir and van der Waals forces. The differential quadrature （DQ） method is employed as a high-order approximation to discretize the governing nonlinear differential equation, yielding more accurate results with a Considerably smaller number of grid points. In addition, a powerful analytical method called parameter expansion method （PEM） is utilized to compute the dynamic solution and frequency-amplitude relationship. It is illustrated that the first two terms in series expansions are sufficient to produce an acceptable solution of the mentioned structure. Finally, the effects of basic parameters on static and dynamic pull-in insta- bility and natural frequency are studied.

Analysis of Rural Population Planning in Liaoning Based on Push and Pull Theory

Data from the seventh national census show that the mobility of rural population in Liaoning is relatively active.Rural revitalization,as a major deployment for development in the new era,will undoubtedly face a variety of problems in the implementation process.Through the study of the relationship between rural revitalization and population,it is found that the loss of rural population is one of the important reasons that hinder rural economic development and lead to the imbalance of urban and rural economic development.According to the "push and pull theory" by the demographer Bagne,the paper analyzes the causes of rural population loss in Liaoning Province.The rural population backflow and two-way flow of urban and rural population in Liaoning Province is achieved through industrial interaction between urban and rural areas,innovative development of agriculture,steady follow-up of service industry and other measures,thus revitalizing the rural economy.

Test-retest strength reliability of the Electronic Push/Pull Dynamometer (EPPD) in the measurement of the quadriceps and hamstring muscles on a new chair

Background: Test-retest strength reliability of the Electronic Push/Pull Dynamometer (EPPD) in the measurement of the extensor and flexor muscles on a new constructed chair. The objective of the study was to assess reliability of Electronic Push/Pull Dynamometer in the measurement of the knee flexion and extension at 90° and 60° on a new constructed chair. The aims of the author: To assess reliability of Electronic Push/Pull Dynamometer in the measurement of the knee flexion and extension at 90° and 60° on a new constructed chair. Design: A test-retest reliability study. Subjects: One hundred healthy students male and female (mean age, 21y). Methods: Maximum isometric strength of the quadriceps and hamstring muscle groups was measured using the EPPD were recorded at 60° and 90° for 3 trials on 2 occasions. Reliability was assessed with the Intraclass correlation coefficient (ICC), mean and standard deviation (SD) of measurements, and smallest real differences were calculated for the maximum and for the mean and work of the 3 repetitions. Results: Mean strength ranged from 50.44 kg for knee flexion to 55.76 kg for knee extension 50.44 kg to 61.98 kg at 90° hip flexion. Test-retest reliability Intraclass correlation coefficients (ICCs) ranged from 0.85 to 0.99. ICCs for test-retest reliability ranged from 0.780 to 0.998. Conclusions: The results of the reliability study indicate that the EPPD in reliable dynamometer to use in determining lower limb muscle force production. It can be used to measure disease progression and to evaluate changes in knee extension and flexion strength at the individual patient level.

Development of Pull Strategies in Production Management in Order to Increase Efficiency of Manufacturing Enterprise

The article deals with possible approaches to the management of manufacturing organizations. The authors emphasize the need for integration of lean management with eco-innovation. This integration represents a sustainable development so that environmental impacts are reduced, more effective use of natural resources is achieved and production costs are reduced. Manufacturing organizations based on that approach must use so-called pull production control systems. Pull systems are most often presented in production management system--Kanban. This article also deals with specification of these systems and the development of pull strategies in production management in order to increase efficiency of manufacturing enterprise.

Exploring Tourists＇ Push and Pull Travel Motivations to Participate in Songkran Festival in Thailand as a Tourist Destination： A Case of Taiwan Residents Visitors

This study aims to identify travel motivations including push and pull motivations that positively and directly affected the decision-making of Taiwan Residents travelers in participating in Songkran Festival in Thailand as their cultural destination. A questionnaire survey was conducted with 388 Taiwan Residents respondents who have never participated in Songkran Festival in Thailand before. The lists consisted of 30 attributes representing push motivation （14 attributes） as ＂psychological factor＂, pull motivation （13 attributes） as ＂destination factor＂, and intention to participate （three attributes）. Pearson＇s correlation and simple linear regression were used to examine the research hypotheses. As a result, push and pull motivations positively and directly affected the intention to participate in Songkran Festival in Thailand. For push motivation, Taiwan Residents visitors perceived that they want to relax and get experience in foreign land, and have enjoyable time with travel companion. For pull motivation, Taiwan Residents visitors perceived that there are many special events in Songkran Festival, the image of Songkran Festival, Thai food is delicious, and the people are friendly and courteous. The managerial implications were also made for tourism industry of Thailand in terms of examination motivations in implementing new market strategies, designing promotion, and decision-making about destination development.

ZCT Scheme of Push-Pull Forward Converter

The paper proposes a novel zero current transition (ZCT) push pull forward converter. The auxiliary resonant cell is in parallel with the main circuit and the zero current switching (ZCS) range of the main and the auxiliary switches of the proposed converter are entirely achieved. The resonant capacitor achieves high voltage by operating the auxiliary cell. The auxiliary switch turns on before the main switches turn off, the high voltage of resonant capacitor blanks off the rectifier, and then the curr...

A NEW SOFT-SWITCHING PUSH-PULL THREE-LEVEL CONVERTER

The application areas of conventional push pull converters are limited because of high voltage stress of switches (twice of input voltage). This paper presents a novel zero voltage and zero current switching (ZCS) PWM push pull three level converter in which the voltage stress of switches is input voltage. With phase shifted modulation strategy, the leading switches can only realize zero voltage switching (ZVS), and the lagging switches can realize ZCS when block capacitor and block diodes are added. Using the strategy, the converter overcomes the drawbacks presented by the conventional push pull converter, such as magnetic aberration, large switch loss, and voltage spike on switches, so it can get higher efficiency, and a wider application area. The operating principle of the new converter is analyzed and verified on a 600 W, 50 kHz experimental prototype. Several zero voltage and zero current switching PWM push pull three level converters are proposed.

Netscape的PUSH/PULL机制及其应用

为了实现动态应用，Netscape提出了PUSH／PULL机制。本文对这两种机制的原理、效率进行了阐述和分析；并将其与Java比较，以阐明他们各自的特点和应用场合。

WAP应用中的PUSH/PULL集成机制研究

针对 WAP不同于有线 Internet的特点研究新的信息获取模式具有重要的意义 .本文在对比分析 PUSH和PUL L 两种信息获取模式的基础上 ,提出了更有效的 PU SH/ PU L L 集成应用模式 ,详细阐述了 WAP针对 PUSH定义的实体、相关协议及其实体分布体系 ,重点探讨了 PUSH机制的实现方法 .本文所提出的集成应用思想 ,通过最后给出的

A new weld repair technique for friction stir welded aluminium structure:inertia friction pull plug welding

The paper gives an analysis on technical characteristics of repair techniques for friction stir welding defects. To overcome the defects,a new repair technique, inertia friction pull plug welding( IFPPW), was researched and its equipment was developed as well. Elementary datum was achieved by investigating the influences of technological parameters on mechanical properties and by analyzing the structural characteristics of repair joint with IFPPW. The study shows that the stability and reliability of welding process of IFPPW can be guaranteed through the constant energy from the flywheel.Integrated with the advantages of friction pull plug welding,the IFPPW,free from back anvil,is considered as a promising technique in repair of termination keyhole of bobbin tool friction stir welding and point-like defects in aluminum alloy welding.

Mechanical properties and supporting effect of CRLD bolts under static pull test conditions

A device for supporting soft rock masses combined with a constant resistance structure characterized by constant resistance and large deformation at the end of a steel bar, known as the constant resistance and large deformation（CRLD） bolt, has recently been developed to counteract soft rock swelling that often occurs during deep mining. In order to further study the mechanical properties of the CRLD bolt, we investigated its mechanical properties by comparison with the conventional strength bolt（rebar） using static pull tests on many aspects, including supporting capacity, elongation, radial deformation, and energy absorption. The tests verified that the mechanical defects of the rebar, which include the decrease of bolt diameter, reduction of supporting capacity, and emergence and evolution of fracture until failure during the whole pull process, were caused by the Poisson＇s ratio effect. Due to the special structure set on the CRLD bolt, the bolt presents a seemingly unusual phenomenon of the negative Poisson＇s ratio effect, i.e., the diameter of the constant resistance structure increases while under-pulling. It is the very effect that ensures the extraordinary mechanical properties, including high resistance, large elongation, and strong energy absorption. According to the comparison and analysis of numerical simulation and field test, we can conclude that the CRLD bolt works better than the rebar bolt.

Theoretical and experimental study of the pulling force of jet bits in radial drilling technology

Radial drilling technology, of which the jet bit is the key device, is a research focus in the field of oil drilling and production. This paper establishes mechanical equations for jet bits and analyzes the hydroseal of backward jets in bottom holes. Meanwhile this paper establishes a mechanical equation for a high pressure hose and analyzes the axial force distribution. Laboratory experiments indicate that the flow rate, the angle between the backward nozzle axis and the jet bit axis, and the hole diameter are the major influencing factors; the generation of the pulling force is mainly due to the inlet pressure of the jet bit; the backward jets can significantly increase not only the pulling force but also the stability of jet bits. The pulling force would reach 8,376 N under experimental conditions, which can steadily pull the high-pressure hose forward.

AGGLOMERATION AND RADIATION EFFECT OF THE PULL OF URBANIZATION

In order to explore the train of thought for China’s urbanizing development and coordinated rural economic development, and to find good ways of solving rural problems through urbanization, this paper absorbs the push-and-pull forces theory and the systematic dynamic theory in the traditional population migration theories, views urbanization as a dynamic system, makes research on the push-and-pull mechanism of urbanization. The pulling power of urbanization is analyzed according to two aspects, the agglomeration effect and the radiation effect of cities. The agglomeration effect provides continuous propelling force for urbanization, and the radiation effect further accelerates the urbanization process by pushing forward the development of rural economy. Of course, the slow development of urbanization can result in the hindrance to rural economic development.