A critical pathway towards enhancing pulp mill biorefineries is to integrate the extraction and utilization of hemicelluloses into the pulping processes.Hence,an industrial pre-extraction strategy for hemicelluloses t...A critical pathway towards enhancing pulp mill biorefineries is to integrate the extraction and utilization of hemicelluloses into the pulping processes.Hence,an industrial pre-extraction strategy for hemicelluloses targeting eucalyptus kraft pulping process was developed.Alkaline solution or pulping white liquor was used to pre-extract hemicelluloses before the actual pulping process.The response surface methodology(RSM)technique was applied to investigate the most suitable conditions to maximize the yield of these hemicelluloses while simultaneously minimizing the damage to pulp yields and properties.Temperature(105 to 155℃),alkali concentration(3%to 8%),sulfidity(20%to 30%)and retention time(19 to 221 min)were combined to evaluate their effects on hemicellulose yields and chemical structures.The optimal pre-extraction conditions identified in this work(5.75%NaOH concentration,25%sulfidity at 135℃for 60 min)successfully allowed recovering 4.8%of hemicelluloses(based on the wood dry mass)and limited damages to pulp yields and properties.The cellulose content in pulp can even be increased by about 10%.Hemicellulose emulsification properties were also evaluated,which were comparable to synthetic emulsifiers.This study provides an industrial pathway to effectively separate and utilize wood hemicelluloses from the pulping process,which has the potential to improve the economy and material utilization of pulp and paper mills.展开更多
Human dental pulp stem cell transplantation has been shown to be an effective therapeutic strategy for spinal cord injury.However,whether the human dental pulp stem cell secretome can contribute to functional recovery...Human dental pulp stem cell transplantation has been shown to be an effective therapeutic strategy for spinal cord injury.However,whether the human dental pulp stem cell secretome can contribute to functional recovery after spinal cord injury remains unclear.In the present study,we established a rat model of spinal cord injury based on impact injury from a dropped weight and then intraperitoneally injected the rats with conditioned medium from human dental pulp stem cells.We found that the conditioned medium effectively promoted the recovery of sensory and motor functions in rats with spinal cord injury,decreased expression of the microglial pyroptosis markers NLRP3,GSDMD,caspase-1,and interleukin-1β,promoted axonal and myelin regeneration,and inhibited the formation of glial scars.In addition,in a lipopolysaccharide-induced BV2 microglia model,conditioned medium from human dental pulp stem cells protected cells from pyroptosis by inhibiting the NLRP3/caspase-1/interleukin-1βpathway.These results indicate that conditioned medium from human dental pulp stem cells can reduce microglial pyroptosis by inhibiting the NLRP3/caspase-1/interleukin-1βpathway,thereby promoting the recovery of neurological function after spinal cord injury.Therefore,conditioned medium from human dental pulp stem cells may become an alternative therapy for spinal cord injury.展开更多
BACKGROUND Atherosclerosis(AS),a chronic inflammatory disease of blood vessels,is a major contributor to cardiovascular disease.Dental pulp stem cells(DPSCs)are capable of exerting immunomodulatory and anti-inflammato...BACKGROUND Atherosclerosis(AS),a chronic inflammatory disease of blood vessels,is a major contributor to cardiovascular disease.Dental pulp stem cells(DPSCs)are capable of exerting immunomodulatory and anti-inflammatory effects by secreting cytokines and exosomes and are widely used to treat autoimmune and inflam-mation-related diseases.Hepatocyte growth factor(HGF)is a pleiotropic cytokine that plays a key role in many inflammatory and autoimmune diseases.AIM To modify DPSCs with HGF(DPSC-HGF)and evaluate the therapeutic effect of DPSC-HGF on AS using an apolipoprotein E-knockout(ApoE-/-)mouse model and an in vitro cellular model.METHODS ApoE-/-mice were fed with a high-fat diet(HFD)for 12 wk and injected with DPSC-HGF or Ad-Null modified DPSCs(DPSC-Null)through tail vein at weeks 4,7,and 11,respectively,and the therapeutic efficacy and mechanisms were analyzed by histopathology,flow cytometry,lipid and glucose measurements,real-time reverse transcription polymerase chain reaction(RT-PCR),and enzyme-linked immunosorbent assay at the different time points of the experiment.An in vitro inflammatory cell model was established by using RAW264.7 cells and human aortic endothelial cells(HAOECs),and indirect co-cultured with supernatant of DPSC-Null(DPSC-Null-CM)or DPSC-HGF-CM,and the effect and mechanisms were analyzed by flow cytometry,RT-PCR and western blot.Nuclear factor-κB(NF-κB)activators and inhibitors were also used to validate the related signaling pathways.RESULTS DPSC-Null and DPSC-HGF treatments decreased the area of atherosclerotic plaques and reduced the expression of inflammatory factors,and the percentage of macrophages in the aorta,and DPSC-HGF treatment had more pronounced effects.DPSCs treatment had no effect on serum lipoprotein levels.The FACS results showed that DPSCs treatment reduced the percentages of monocytes,neutrophils,and M1 macrophages in the peripheral blood and spleen.DPSC-Null-CM and DPSC-HGF-CM reduced adhesion molecule expression in tumor necrosis factor-αstimulated HAOECs and regulated M1 polarization and inflammatory factor expression in lipopolysaccharide-induced RAW264.7 cells by inhibiting the NF-κB signaling pathway.CONCLUSION This study suggested that DPSC-HGF could more effectively ameliorate AS in ApoE-/-mice on a HFD,and could be of greater value in stem cell-based treatments for AS.展开更多
BACKGROUND The self-assembly of solid organs from stem cells has the potential to greatly expand the applicability of regenerative medicine.Stem cells can self-organise into microsized organ units,partially modelling ...BACKGROUND The self-assembly of solid organs from stem cells has the potential to greatly expand the applicability of regenerative medicine.Stem cells can self-organise into microsized organ units,partially modelling tissue function and regeneration.Dental pulp organoids have been used to recapitulate the processes of tooth development and related diseases.However,the lack of vasculature limits the utility of dental pulp organoids.AIM To improve survival and aid in recovery after stem cell transplantation,we demonstrated the three-dimensional(3D)self-assembly of adult stem cell-human dental pulp stem cells(hDPSCs)and endothelial cells(ECs)into a novel type of spheroid-shaped dental pulp organoid in vitro under hypoxia and conditioned medium(CM).METHODS During culture,primary hDPSCs were induced to differentiate into ECs by exposing them to a hypoxic environment and CM.The hypoxic pretreated hDPSCs were then mixed with ECs at specific ratios and conditioned in a 3D environment to produce prevascularized dental pulp organoids.The biological characteristics of the organoids were analysed,and the regulatory pathways associated with angiogenesis were studied.RESULTS The combination of these two agents resulted in prevascularized human dental pulp organoids(Vorganoids)that more closely resembled dental pulp tissue in terms of morphology and function.Single-cell RNA sequencing of dental pulp tissue and RNA sequencing of Vorganoids were integrated to analyse key regulatory pathways associated with angiogenesis.The biomarkers forkhead box protein O1 and fibroblast growth factor 2 were identified to be involved in the regulation of Vorganoids.CONCLUSION In this innovative study,we effectively established an in vitro model of Vorganoids and used it to elucidate new mechanisms of angiogenesis during regeneration,facilitating the development of clinical treatment strategies.展开更多
Dental pulp stem/stromal cells(DPSCs)are fibroblast-like,neural crest-derived,and multipotent cells that can differentiate into several lineages.They are relatively easy to isolate from healthy and inflamed pulps,with...Dental pulp stem/stromal cells(DPSCs)are fibroblast-like,neural crest-derived,and multipotent cells that can differentiate into several lineages.They are relatively easy to isolate from healthy and inflamed pulps,with little ethical concerns and can be successfully cryopreserved and thawed.The therapeutic effects of DPSCs derived from animal or human sources have been extensively studied through in-vitro and in-vivo animal experiments and the findings indicated that DPSCs are effective not only for dental diseases but also for systemic diseases.Understanding that translational research is a critical step through which the fundamental scientific discoveries could be translated into applicable diagnostics and therapeutics that directly benefit humans,several clinical studies were carried out to generate evidence for the efficacy and safety of autogenous or allogeneic human DPSCs(hDPSCs)as a treatment modality for use in cell-based therapy,regenerative medicine/dentistry and tissue engineering.In clinical medicine,hDPSCs were effective for treating acute ischemic stroke and human exfoliated deciduous teeth-conditioned medium(SHED-CM)repaired vascular damage of the corpus cavernous,which is the main cause of erectile dysfunction.Whereas in clinical dentistry,autologous SHED was able to rege-nerate necrotic dental pulp after implantation into injured teeth,and micrografts enriched with autologous hDPSCs and collagen sponge were considered a treatment option for human intrabony defects.In contrast,hDPSCs did not add a significant regenerative effect when they were used for the treatment of post-extraction sockets.Large-scale clinical studies across diverse populations are still lacking to provide robust evidence on the safety and efficacy of hDPSCs as a new treatment option for various human diseases including dental-related problems.展开更多
X-linked hypophosphatemia(XLH)represents the most common form of familial hypophosphatemia.Although significant advances have been made in the treatment of bone pathology,patients undergoing therapy continue to experi...X-linked hypophosphatemia(XLH)represents the most common form of familial hypophosphatemia.Although significant advances have been made in the treatment of bone pathology,patients undergoing therapy continue to experience significantly decreased oral health-related quality of life.The following study addresses this persistent oral disease by further investigating the effect of DMP1 expression on the differentiation of XLH dental pulp cells.Dental pulp cells were isolated from the third molars of XLH and healthy controls and stable transduction of full-length human DMP1 were achieved.RNA sequencing was performed to evaluate the genetic changes following the induction of odontogenic differentiation.RNAseq data shows the upregulation of inhibitors of the canonical Wnt pathway in XLH cells,while constitutive expression of full-length DMP1 in XLH cells reversed this effect during odontogenic differentiation.These results imply that inhibition of the canonical Wnt pathway may contribute to the pathophysiology of XLH and suggest a new therapeutic strategy for the management of oral disease.展开更多
Human dental pulp stem cells(hDPSCs) promote recovery after ischemic stro ke;however,the therapeutic efficacy is limited by the poor survival of transplanted cells.For in vitro expe riments in the present study,we use...Human dental pulp stem cells(hDPSCs) promote recovery after ischemic stro ke;however,the therapeutic efficacy is limited by the poor survival of transplanted cells.For in vitro expe riments in the present study,we used oxygen-glucose deprivation/reoxygenation in hDPSCs to mimic cell damage induced by ischemia/reperfusion.We found that miRNA-34a-5p(miR-34a) was elevated under oxygen-glucose deprivation/reoxygenation conditions in hDPSCs.Inhibition of miR-34a facilitated the prolife ration and antioxidant capacity and reduced the apoptosis of hDPSCs.Moreove r,dual-luciferase reporter gene assay showed WNT1and SIRT1 as the targets of miR-34a.In miR-34a knockdown cell lines,WNT1 suppression reduced cell prolife ration,and SIRT1 suppression decreased the antioxidant capacity.Togethe r,these results indicated that miR-34a regulates cell prolife ration and antioxidant stress via targeting WNT1 and SIRT1,respectively.For in vivo expe riments,we injected genetically modified hDPSCs(anti34a-hDPSCs) into the brains of mice.We found that anti34a-hDPSCs significantly inhibited apoptosis,reduced cerebral edema and cerebral infarct volume,and improved motor function in mice.This study provides new insights into the molecular mechanism of the cell prolife ration and antioxidant capacity of hDPSCs,and suggests a potential gene that can be targeted to improve the survival rate and efficacy of transplanted hDPSCs in brain after ischemic stroke.展开更多
Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High...Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High-grade dissolving pulp was prepared from eucalyptus using a combination of extremely low acid(ELA)pretreatment,Kraft cooking,and elementary chlorine-free(ECF)bleaching.The obtained pre-hydrolysate was catalytic conversion into furfural in a biphasic system,and lignin during Kraft cooking and ECF was recovered.The process condition was discussed as well as the mass flow direction.The results showed that ELA pretreatment could effectively remove 80.1%hemicellulose.Compared with traditional hydrothermal pretreatment,the ELA pretreatment significantly increased the xylose yield from 5.05 to 14.18 g/L at 170℃ for 2 h,which had practical significance for furfural production.The 82.7%furfural yield and 82.9%furfural selectivity were obtained from xylose-rich pre-hydrolysate using NaCl as a phase modifier in a biphasic system with 4-methyl-2-pentanone(MIBK)as an organic phase by ion exchange resin catalysts at 190℃ for 2 h.Subsequently,the pretreated eucalyptus was subjected to Kraft cooking,and the optimal alkali amount was 14%.Then,the Kraft pulp was bleached using the O-D1-EP-D_(2) sequence,and dissolving pulp was obtained with an ISO brightness of 86.0%,viscosity of 463 mL/g,andα-cellulose content of 95.4%.The Kraft lignin which has a potential application was investigated by 2D-HSQC NMR and 31P NMR.The results showed that the S/G ratio of Kraft lignin was 1.93,and the content of phenolic hydroxyl groups was 2.53 mmol/g.Moreover,based on the above proposed process,30.5 g dissolving pulp,5.5 g furfural,and 21.2 g lignin per 100 g eucalyptus chips(oven dry)were produced.This research will provide new catalysis and pulping technical routes for dissolving pulp,furfural,and Kraft lignin products,which are in great demand in the chemical industry.展开更多
The molded pulp,a product of three-dimensional papermaking technology,is environmentally friendly and has a low environmental impact due to its ability to decompose quickly in the natural environment after disposal.Th...The molded pulp,a product of three-dimensional papermaking technology,is environmentally friendly and has a low environmental impact due to its ability to decompose quickly in the natural environment after disposal.The application of molded pulp for food packaging can replace or reduce the use of plastic food packaging.Researchers extract fibers from plants for the production of safe and hygienic molded pulp for food packaging,and they also study and enhance the qualities of molded pulp to broaden its use in the food industry.This paper reviews the sources and varieties of plant fiber used in molded pulp for food packaging,as well as research on the improvement and optimization of the performance of molded pulp products.Additionally,issues with molded pulp’s actual use for food packaging are reviewed,along with the potential for future research.This work can serve as a reference for molded pulp applications and research in the food industry in the future.展开更多
Considering the serious barriers/issues induced by the accumulated starch generated in white water system of old corrugated cardboard(OCC)pulping process,large amounts of accumulated starch in white water would be dec...Considering the serious barriers/issues induced by the accumulated starch generated in white water system of old corrugated cardboard(OCC)pulping process,large amounts of accumulated starch in white water would be decomposed by microorganisms and could not be utilized,thereby resulting in severe resource wastage and environmental pollution.This study mainly explored the effects of biodegradation/hydrolysis conditions of the two types of starch substrates(native starch and enzymatically(α-amylase)hydrolyzed starch),which were treated via microorganism degradation within the simulated white water from OCC pulping system and their biodegradation products on the key properties were characterized via X-ray diffraction(XRD),Fourier-transform infrared spectroscopy(FT-IR),and gel permeation chromatography(GPC)technologies.The effects of system temperature,pH value,starch concentration,and biodegradation time on starch biodegradation ratio and the characteristics of obtained biodegradated products from the two types of starches were studied.In addition,the effect ofα-amylase dosage on the biodegradation ratio of enzymatically hydrolyzed starch and its properties was investigated.It was found that the native starch presented a maximal degradation ratio at a system temperature of 55℃and pH value range of 5-7,respectively,the corresponding starch concentration within simulated white water system was 200 mg/L.Whereas the enzymatically hydrolyzed starch exhibited a highest degradation ratio at a system temperature of 50℃and pH value of 5.5,respectively,and the corresponding starch concentration within simulated white water system was 100 mg/L.It was verified that native starch is more readily bio-hydrolyzed and biodegradation-susceptive by microorganisms in simulated white water system of OCC pulping process,while the enzymatically hydrolyzed starch exhibits better biodegradation/hydrolysis resistance to the microbial degradation than that of native starch.This study provides a practical and interesting approach to investigate the starch hydrolysis or biodegradation behaviors in white water system of OCC pulping process,which would greatly contribute to the full recycling and valorized application of starch as a versatile additive during paperboard production.展开更多
Carious lesions are bacteria-caused destructions of the mineralised dental tissues,marked by the simultaneous activation of immune responses and regenerative events within the soft dental pulp tissue.While major molec...Carious lesions are bacteria-caused destructions of the mineralised dental tissues,marked by the simultaneous activation of immune responses and regenerative events within the soft dental pulp tissue.While major molecular players in tooth decay have been uncovered during the past years,a detailed map of the molecular and cellular landscape of the diseased pulp is still missing.In this study we used single-cell RNA sequencing analysis,supplemented with immunostaining,to generate a comprehensive single-cell atlas of the pulp of carious human teeth.Our data demonstrated modifications in the various cell clusters within the pulp of carious teeth,such as immune cells,mesenchymal stem cells(MSC)and fibroblasts,when compared to the pulp of healthy human teeth.Active immune response in the carious pulp tissue is accompanied by specific changes in the fibroblast and MSC clusters.These changes include the upregulation of genes encoding extracellular matrix(ECM)components,including COL1A1 and Fibronectin(FN1),and the enrichment of the fibroblast cluster with myofibroblasts.The incremental changes in the ECM composition of carious pulp tissues were further confirmed by immunostaining analyses.Assessment of the Fibronectin fibres under mechanical strain conditions showed a significant tension reduction in carious pulp tissues,compared to the healthy ones.The present data demonstrate molecular,cellular and biomechanical alterations in the pulp of human carious teeth,indicative of extensive ECM remodelling,reminiscent of fibrosis observed in other organs.This comprehensive atlas of carious human teeth can facilitate future studies of dental pathologies and enable comparative analyses across diseased organs.展开更多
Peripheral nerve injury(PNI)seriously affects people’s quality of life.Stem cell therapy is considered a promising new option for the clinical treatment of PNI.Dental stem cells,particularly dental pulp stem cells(DP...Peripheral nerve injury(PNI)seriously affects people’s quality of life.Stem cell therapy is considered a promising new option for the clinical treatment of PNI.Dental stem cells,particularly dental pulp stem cells(DPSCs),are adult pluripotent stem cells derived from the neuroectoderm.DPSCs have significant potential in the field of neural tissue engineering due to their numerous advantages,such as easy isolation,multidifferentiation potential,low immunogenicity,and low transplant rejection rate.DPSCs are extensively used in tissue engineering and regenerative medicine,including for the treatment of sciatic nerve injury,facial nerve injury,spinal cord injury,and other neurodegenerative diseases.This article reviews research related to DPSCs and their advantages in treating PNI,aiming to summarize the therapeutic potential of DPSCs for PNI and the underlying mechanisms and providing valuable guidance and a foundation for future research.展开更多
Fiber screen fractionation of recycled old corrugated container(OCC)pulp and subsequent targeted processing of each fraction can lead to higher fiber quality,more uniform pulp,and increased handsheet strength and surf...Fiber screen fractionation of recycled old corrugated container(OCC)pulp and subsequent targeted processing of each fraction can lead to higher fiber quality,more uniform pulp,and increased handsheet strength and surface smoothness.This pilot-scale study evaluates the benefits of fiber fractionation using a pressure screen prior to low consistency(LC)refining.A 0.81-mm smooth holed screen cylinder is utilized,and two refiner plate patterns are adopted(wide 0.99 km/rev BEL and interim 2.01 km/rev BEL).Here,LC-refined reject fractions are mixed with the created microfibrillated cellulose(MFC),and the mixed pulp and paper qualities are compared with no-MFC OCC pulps.The results indicate that the highest tensile strength of the handsheet is obtained by the addition of MFC to the fractionated refined OCC pulp compared to the unfractionated refined OCC and primary OCC pulps at a given specific energy.Furthermore,the experimental approach adopted in this study can be used to optimize recycled OCC pulping systems.Overall,the results indicate that fractionated LC refining plus MFC addition provides higher pulp and paper qualities and the potential for saving energy to reach the desired tensile strength of the OCC pulp.展开更多
To improve heating uniformity and anthocyanin content of the blueberry pulp under microwave heating,the intermittent variable power microwave heating technology was introduced in the study.The effects of technology pa...To improve heating uniformity and anthocyanin content of the blueberry pulp under microwave heating,the intermittent variable power microwave heating technology was introduced in the study.The effects of technology parameters in terms of high microwave intensity heating time,intermittent time,low microwave intensity and low microwave intensity heating time on the blueberry pulp quality parameters(heating uniformity,average moisture content,the highest temperature and anthocyanin content)were investigated by using the response surface method.The results showed that the longer heating time under different microwave intensities resulted in the poorer heating uniformity.The intermittent stage promoted heat and mass transfer within the pulp and reduced the temperature difference and moisture gradient within the pulp,which enhanced desired uniformity of temperature and moisture distribution before entering the low microwave intensity heating stage.Therefore,the longer the intermittent time,the greater the heating uniformity.The optimal parameters were developed as high microwave intensity of 4 W·g^(-1),high microwave intensity heating time of 9.86 min,intermittent time of 10 min,low microwave intensity of 2.2 W·g^(-1)and low microwave intensity heating time of 6 min.This research might provide guidance for microwave heating berry fruits.展开更多
Power consumption is the energy source of the impact on fibers or pulp during low-consistency(LC)pulp refining,and the strength of refining affects refining quality and efficiency.The pulp properties,operating paramet...Power consumption is the energy source of the impact on fibers or pulp during low-consistency(LC)pulp refining,and the strength of refining affects refining quality and efficiency.The pulp properties,operating parameters,and bar parameters of the refiner plates are important parameters affecting refining efficiency,which can be defined as the ratio of net to total refining power.In this study,LC refining trials for pulps with different consistencies and fiber lengths were conducted using five isometric straightbar plates with different bar angles to explore the influences of the plate bar angle and pulp properties on the no-load power,impact capacity on fibers and refining efficiency.It was found that the no-load power of the LC refining process decreased with an increase in the plate bar angle while increased when pulp with higher consistency was refined under the same refining conditions.However,the effect of pulp consistency on the no-load power can be neglected when refining is conducted using plates with larger bar angles.Meanwhile,a critical bar angle for straight-bar plates in LC refining may exist,which has the strongest impact on the pulp and highest refining efficiency under the same refining conditions.In addition,the impact capacity of the plate on the pulp and refining efficiency in LC refining can be enhanced by appropriately increasing the pulp consistency and average fiber length when the bar angle of the refiner plate with a sector angle of 40°is less than 30°.Therefore,the efficiency and power consumption of the LC refining process can be adjusted by optimizing the pulp consistency and bar parameters of the refining plates.展开更多
Background:Raphia fruit pulp is a good source of phytochemicals and some micronutrients and is locally consumed as a snack.The aim of this study was to valorize raphia pulp in biscuits production by partially substitu...Background:Raphia fruit pulp is a good source of phytochemicals and some micronutrients and is locally consumed as a snack.The aim of this study was to valorize raphia pulp in biscuits production by partially substituting wheat flour in different proportions with flour obtained from the pulp of the raphia fruit.Methods:Ripe raphia(Raphia hookeri)fruits were purchased from local farms,thoroughly washed and the pulps extracted using a stainless-steel knife.These pulps were dried at 60℃for 12 h and grounded into flour.Wheat flour was substituted with the raphia pulp flour(RF)in five different proportions(10,20,30,35,and 40%).The functional properties and nutrient profile of the raphia flour and the biscuits obtained from these composite flours were evaluated.Sensory evaluation of the biscuits was also carried out using a nine-point hedonic scale.Results:The RF has a high-water absorption capacity WAC(680%)and oil absorption capacity OAC(560%)favoring its use in pastry processes.The RF is rich in polyphenols 435.0±20(μg/100g),saponins(155±5 mg/100g)and potassium(922±20 mg/100g).The incorporation of the RF in biscuits significantly affect the chemical composition.The total polyphenols increased from 182±10μg/100g in the sample containing 10%of RF to 342±17μg/100g in the sample containing 40%of RF.Fibers increased from 8.75±0.03 mg/100g in the sample with 10%of RF to 10.08±0.27 mg/100g in the 40%substituted biscuit.Saponins increased from 69.9±0.01 mg/100g in the sample with 10%of RF to 90.22±0.01 mg/100g in the sample with 40%RF and potassium increased from 434.2±10 mg/100g in the sample with 10%of RF to 647.6±5 mg/100g in the sample with 40%of RF.Biscuit samples made with composite flour containing 20%of RF was the most accepted.Conclusion:RF can be used as a raw material to replace 20%of wheat flour in biscuit formulations and improve its nutritional and sensory properties.展开更多
The refining performances of mixed poplar and eucalyptwoodchips(mixture ratio 6:4)were investigated at medium and highpulp consistency via chemi-mechanical pulping(CMP).The specificrefining energy consumption(SEC),fib...The refining performances of mixed poplar and eucalyptwoodchips(mixture ratio 6:4)were investigated at medium and highpulp consistency via chemi-mechanical pulping(CMP).The specificrefining energy consumption(SEC),fiber fraction proportion,andCanadian standard freeness(CSF)were determined to evaluate the effectsof pulp consistency and NaOH dosage on the refining performancesof mixed poplar and eucalypt woodchips.While the dosage of NaOHfor impregnation was maintained constant,the SEC and shive contentincreased with increasing pulp consistency.Different fractions obtainedfrom the Bauer-McNett classifier showed that higher pulp consistencycould be expected to yield more long fibers and shive in the stock.Upon increasing the NaOH dosage,the shive content and SEC reducedsignificantly.When the NaOH dosage was increased to 6%,the resultsindicated that it was difficult to reduce the shive content to less than 1%athigh pulp consistencies(25%~35%),whereas 0.18%shive fraction couldbe achieved at a medium pulp consistency(15%).展开更多
Bamboo was used as raw material for unbleached pulp production.An acetic acid prehydrolysis process was employed before the pulping process.The effect of acetic acid prehydrolysis on pulp properties was investigated.T...Bamboo was used as raw material for unbleached pulp production.An acetic acid prehydrolysis process was employed before the pulping process.The effect of acetic acid prehydrolysis on pulp properties was investigated.The results showed that some components,such as hemicellulose and extractives,were degraded or dissolved in the prehydrolysis process prior to kraft pulping.SEM images of the substrate after treatment indicated that the parenchyma cell wall was thinner,and the size of pores between fiber bundle cell walls was larger.The pulping results showed that acetic acid prehydrolysis could improve the pulp quality and make the pulp easier to bleach.The brightness of the pulp reached 59.6%ISO with a single oxygen delignification step.The acetic acid prehydrolysis decreased pulp viscosity and fiber length,but not significantly.The amount of parenchyma cells in the pulp was reduced,which was beneficial for papermaking and improving mechanical strength of paper.This procedure has good potential for unbleached pulp production.展开更多
Morphological characteristics and proximate chemical analysis of E. binata showed it as a suitable raw material for writing and printing grade paper. Maximum pulp yield (43.58%) of kappa number 17.38 with 0.9% screeni...Morphological characteristics and proximate chemical analysis of E. binata showed it as a suitable raw material for writing and printing grade paper. Maximum pulp yield (43.58%) of kappa number 17.38 with 0.9% screening rejects was obtained at 12% of active alkali (as Na2O) pulping temperature 130°C, cooking time 120 min and solid to liquor ratio 1:4. During bio-soda pulping of E. binata, pulp yield decreased slightly while pulp brightness, tensile index, burst index and double fold numbers were improved by 4.1%, 24.94%, 14.03% and 48.45% respectively compared to soda pulping. During ethanol-soda pulping of E. binata, pulp yield, pulp brightness, tensile index, burst index and double fold numbers were improved by 3.9%, 6.6%, 32.18%, 35.40% and 77.31% respectively compared to soda pulping.展开更多
Hemicellulose has a wide range of applications,including that as an emulsifier for the food industry and raw material for the synthesis of bioethanol/biochemicals and biodegradable films.Hemicellulose is usually prese...Hemicellulose has a wide range of applications,including that as an emulsifier for the food industry and raw material for the synthesis of bioethanol/biochemicals and biodegradable films.Hemicellulose is usually present as a spent liquor,such as the prehydrolysis liquor of the prehydrolysis kraft dissolving pulp production process and the alkali extraction liquor of the cold caustic extraction of pulp fibers.Due to its dilute nature,hemicellulose needs to be dried for practical utilization,and this is challenging.In this study,cellulose and hemicellulose in a bleached bamboo kraft pulp were separated using an alkali extraction process.Hemicellulose obtained from the extraction liquor was dried by an ammonium carbonate-assisted drying process.The effects of drying time and drying temperature were determined.Structure of the hemicellulose obtained by the ammonium carbonate-assisted drying process was similar to that of original hemicellulose,as revealed by detailed Fourier transform infrared and X-ray diffraction analyses.The novel drying method was more energy efficient and required a shorter drying time than the conventional freeze drying method,and the excellent solubility in alkaline solutions favored the chemical modification of hemicellulose.The dried hemicellulose can be used as a renewable raw material for the preparation of hydrogels and other substances such as bioethanol/biochemicals and biodegradable films.展开更多
基金supported by the Natural Science Foundation of Guangdong Province(2023A1515030211)the National Natural Science Foundation of China(22278157)Guangzhou Science and Technology Program(2023B03J1365).
文摘A critical pathway towards enhancing pulp mill biorefineries is to integrate the extraction and utilization of hemicelluloses into the pulping processes.Hence,an industrial pre-extraction strategy for hemicelluloses targeting eucalyptus kraft pulping process was developed.Alkaline solution or pulping white liquor was used to pre-extract hemicelluloses before the actual pulping process.The response surface methodology(RSM)technique was applied to investigate the most suitable conditions to maximize the yield of these hemicelluloses while simultaneously minimizing the damage to pulp yields and properties.Temperature(105 to 155℃),alkali concentration(3%to 8%),sulfidity(20%to 30%)and retention time(19 to 221 min)were combined to evaluate their effects on hemicellulose yields and chemical structures.The optimal pre-extraction conditions identified in this work(5.75%NaOH concentration,25%sulfidity at 135℃for 60 min)successfully allowed recovering 4.8%of hemicelluloses(based on the wood dry mass)and limited damages to pulp yields and properties.The cellulose content in pulp can even be increased by about 10%.Hemicellulose emulsification properties were also evaluated,which were comparable to synthetic emulsifiers.This study provides an industrial pathway to effectively separate and utilize wood hemicelluloses from the pulping process,which has the potential to improve the economy and material utilization of pulp and paper mills.
基金supported by the Research Foundation of Technology Committee of Tongzhou District,No.KJ2019CX001(to SX).
文摘Human dental pulp stem cell transplantation has been shown to be an effective therapeutic strategy for spinal cord injury.However,whether the human dental pulp stem cell secretome can contribute to functional recovery after spinal cord injury remains unclear.In the present study,we established a rat model of spinal cord injury based on impact injury from a dropped weight and then intraperitoneally injected the rats with conditioned medium from human dental pulp stem cells.We found that the conditioned medium effectively promoted the recovery of sensory and motor functions in rats with spinal cord injury,decreased expression of the microglial pyroptosis markers NLRP3,GSDMD,caspase-1,and interleukin-1β,promoted axonal and myelin regeneration,and inhibited the formation of glial scars.In addition,in a lipopolysaccharide-induced BV2 microglia model,conditioned medium from human dental pulp stem cells protected cells from pyroptosis by inhibiting the NLRP3/caspase-1/interleukin-1βpathway.These results indicate that conditioned medium from human dental pulp stem cells can reduce microglial pyroptosis by inhibiting the NLRP3/caspase-1/interleukin-1βpathway,thereby promoting the recovery of neurological function after spinal cord injury.Therefore,conditioned medium from human dental pulp stem cells may become an alternative therapy for spinal cord injury.
文摘BACKGROUND Atherosclerosis(AS),a chronic inflammatory disease of blood vessels,is a major contributor to cardiovascular disease.Dental pulp stem cells(DPSCs)are capable of exerting immunomodulatory and anti-inflammatory effects by secreting cytokines and exosomes and are widely used to treat autoimmune and inflam-mation-related diseases.Hepatocyte growth factor(HGF)is a pleiotropic cytokine that plays a key role in many inflammatory and autoimmune diseases.AIM To modify DPSCs with HGF(DPSC-HGF)and evaluate the therapeutic effect of DPSC-HGF on AS using an apolipoprotein E-knockout(ApoE-/-)mouse model and an in vitro cellular model.METHODS ApoE-/-mice were fed with a high-fat diet(HFD)for 12 wk and injected with DPSC-HGF or Ad-Null modified DPSCs(DPSC-Null)through tail vein at weeks 4,7,and 11,respectively,and the therapeutic efficacy and mechanisms were analyzed by histopathology,flow cytometry,lipid and glucose measurements,real-time reverse transcription polymerase chain reaction(RT-PCR),and enzyme-linked immunosorbent assay at the different time points of the experiment.An in vitro inflammatory cell model was established by using RAW264.7 cells and human aortic endothelial cells(HAOECs),and indirect co-cultured with supernatant of DPSC-Null(DPSC-Null-CM)or DPSC-HGF-CM,and the effect and mechanisms were analyzed by flow cytometry,RT-PCR and western blot.Nuclear factor-κB(NF-κB)activators and inhibitors were also used to validate the related signaling pathways.RESULTS DPSC-Null and DPSC-HGF treatments decreased the area of atherosclerotic plaques and reduced the expression of inflammatory factors,and the percentage of macrophages in the aorta,and DPSC-HGF treatment had more pronounced effects.DPSCs treatment had no effect on serum lipoprotein levels.The FACS results showed that DPSCs treatment reduced the percentages of monocytes,neutrophils,and M1 macrophages in the peripheral blood and spleen.DPSC-Null-CM and DPSC-HGF-CM reduced adhesion molecule expression in tumor necrosis factor-αstimulated HAOECs and regulated M1 polarization and inflammatory factor expression in lipopolysaccharide-induced RAW264.7 cells by inhibiting the NF-κB signaling pathway.CONCLUSION This study suggested that DPSC-HGF could more effectively ameliorate AS in ApoE-/-mice on a HFD,and could be of greater value in stem cell-based treatments for AS.
基金Supported by the Science and Technology Programme of Guangzhou City,No.202201020341.
文摘BACKGROUND The self-assembly of solid organs from stem cells has the potential to greatly expand the applicability of regenerative medicine.Stem cells can self-organise into microsized organ units,partially modelling tissue function and regeneration.Dental pulp organoids have been used to recapitulate the processes of tooth development and related diseases.However,the lack of vasculature limits the utility of dental pulp organoids.AIM To improve survival and aid in recovery after stem cell transplantation,we demonstrated the three-dimensional(3D)self-assembly of adult stem cell-human dental pulp stem cells(hDPSCs)and endothelial cells(ECs)into a novel type of spheroid-shaped dental pulp organoid in vitro under hypoxia and conditioned medium(CM).METHODS During culture,primary hDPSCs were induced to differentiate into ECs by exposing them to a hypoxic environment and CM.The hypoxic pretreated hDPSCs were then mixed with ECs at specific ratios and conditioned in a 3D environment to produce prevascularized dental pulp organoids.The biological characteristics of the organoids were analysed,and the regulatory pathways associated with angiogenesis were studied.RESULTS The combination of these two agents resulted in prevascularized human dental pulp organoids(Vorganoids)that more closely resembled dental pulp tissue in terms of morphology and function.Single-cell RNA sequencing of dental pulp tissue and RNA sequencing of Vorganoids were integrated to analyse key regulatory pathways associated with angiogenesis.The biomarkers forkhead box protein O1 and fibroblast growth factor 2 were identified to be involved in the regulation of Vorganoids.CONCLUSION In this innovative study,we effectively established an in vitro model of Vorganoids and used it to elucidate new mechanisms of angiogenesis during regeneration,facilitating the development of clinical treatment strategies.
文摘Dental pulp stem/stromal cells(DPSCs)are fibroblast-like,neural crest-derived,and multipotent cells that can differentiate into several lineages.They are relatively easy to isolate from healthy and inflamed pulps,with little ethical concerns and can be successfully cryopreserved and thawed.The therapeutic effects of DPSCs derived from animal or human sources have been extensively studied through in-vitro and in-vivo animal experiments and the findings indicated that DPSCs are effective not only for dental diseases but also for systemic diseases.Understanding that translational research is a critical step through which the fundamental scientific discoveries could be translated into applicable diagnostics and therapeutics that directly benefit humans,several clinical studies were carried out to generate evidence for the efficacy and safety of autogenous or allogeneic human DPSCs(hDPSCs)as a treatment modality for use in cell-based therapy,regenerative medicine/dentistry and tissue engineering.In clinical medicine,hDPSCs were effective for treating acute ischemic stroke and human exfoliated deciduous teeth-conditioned medium(SHED-CM)repaired vascular damage of the corpus cavernous,which is the main cause of erectile dysfunction.Whereas in clinical dentistry,autologous SHED was able to rege-nerate necrotic dental pulp after implantation into injured teeth,and micrografts enriched with autologous hDPSCs and collagen sponge were considered a treatment option for human intrabony defects.In contrast,hDPSCs did not add a significant regenerative effect when they were used for the treatment of post-extraction sockets.Large-scale clinical studies across diverse populations are still lacking to provide robust evidence on the safety and efficacy of hDPSCs as a new treatment option for various human diseases including dental-related problems.
基金our funding sources U.S.Department of Health&Human Services,NIH,NIDCR T32 DE018381[Multidisciplinary Oral Science Training Program]DE028193[E.G.]+1 种基金R01 DE031737 and DE 028531[A.G.]the Brodie Endowment Fund。
文摘X-linked hypophosphatemia(XLH)represents the most common form of familial hypophosphatemia.Although significant advances have been made in the treatment of bone pathology,patients undergoing therapy continue to experience significantly decreased oral health-related quality of life.The following study addresses this persistent oral disease by further investigating the effect of DMP1 expression on the differentiation of XLH dental pulp cells.Dental pulp cells were isolated from the third molars of XLH and healthy controls and stable transduction of full-length human DMP1 were achieved.RNA sequencing was performed to evaluate the genetic changes following the induction of odontogenic differentiation.RNAseq data shows the upregulation of inhibitors of the canonical Wnt pathway in XLH cells,while constitutive expression of full-length DMP1 in XLH cells reversed this effect during odontogenic differentiation.These results imply that inhibition of the canonical Wnt pathway may contribute to the pathophysiology of XLH and suggest a new therapeutic strategy for the management of oral disease.
基金supported by the National Natural Science Foundation of China,Nos.81971870 and 82172173 (both to ML)。
文摘Human dental pulp stem cells(hDPSCs) promote recovery after ischemic stro ke;however,the therapeutic efficacy is limited by the poor survival of transplanted cells.For in vitro expe riments in the present study,we used oxygen-glucose deprivation/reoxygenation in hDPSCs to mimic cell damage induced by ischemia/reperfusion.We found that miRNA-34a-5p(miR-34a) was elevated under oxygen-glucose deprivation/reoxygenation conditions in hDPSCs.Inhibition of miR-34a facilitated the prolife ration and antioxidant capacity and reduced the apoptosis of hDPSCs.Moreove r,dual-luciferase reporter gene assay showed WNT1and SIRT1 as the targets of miR-34a.In miR-34a knockdown cell lines,WNT1 suppression reduced cell prolife ration,and SIRT1 suppression decreased the antioxidant capacity.Togethe r,these results indicated that miR-34a regulates cell prolife ration and antioxidant stress via targeting WNT1 and SIRT1,respectively.For in vivo expe riments,we injected genetically modified hDPSCs(anti34a-hDPSCs) into the brains of mice.We found that anti34a-hDPSCs significantly inhibited apoptosis,reduced cerebral edema and cerebral infarct volume,and improved motor function in mice.This study provides new insights into the molecular mechanism of the cell prolife ration and antioxidant capacity of hDPSCs,and suggests a potential gene that can be targeted to improve the survival rate and efficacy of transplanted hDPSCs in brain after ischemic stroke.
基金This research was funded by the National Natural Science Foundation of China(No.21978104)the Program for the National Key Research and Development Program of China(No.2021YFC2101601).
文摘Hemicellulose and lignin are not reasonably utilized during the dissolved pulp preparation process.This work aimed to propose a process for the co-production of dissolving pulp,furfural,and lignin from eucalyptus.High-grade dissolving pulp was prepared from eucalyptus using a combination of extremely low acid(ELA)pretreatment,Kraft cooking,and elementary chlorine-free(ECF)bleaching.The obtained pre-hydrolysate was catalytic conversion into furfural in a biphasic system,and lignin during Kraft cooking and ECF was recovered.The process condition was discussed as well as the mass flow direction.The results showed that ELA pretreatment could effectively remove 80.1%hemicellulose.Compared with traditional hydrothermal pretreatment,the ELA pretreatment significantly increased the xylose yield from 5.05 to 14.18 g/L at 170℃ for 2 h,which had practical significance for furfural production.The 82.7%furfural yield and 82.9%furfural selectivity were obtained from xylose-rich pre-hydrolysate using NaCl as a phase modifier in a biphasic system with 4-methyl-2-pentanone(MIBK)as an organic phase by ion exchange resin catalysts at 190℃ for 2 h.Subsequently,the pretreated eucalyptus was subjected to Kraft cooking,and the optimal alkali amount was 14%.Then,the Kraft pulp was bleached using the O-D1-EP-D_(2) sequence,and dissolving pulp was obtained with an ISO brightness of 86.0%,viscosity of 463 mL/g,andα-cellulose content of 95.4%.The Kraft lignin which has a potential application was investigated by 2D-HSQC NMR and 31P NMR.The results showed that the S/G ratio of Kraft lignin was 1.93,and the content of phenolic hydroxyl groups was 2.53 mmol/g.Moreover,based on the above proposed process,30.5 g dissolving pulp,5.5 g furfural,and 21.2 g lignin per 100 g eucalyptus chips(oven dry)were produced.This research will provide new catalysis and pulping technical routes for dissolving pulp,furfural,and Kraft lignin products,which are in great demand in the chemical industry.
基金supported by the Special Funds for Fundamental Scientific Research Funds of Central Universities(JUSRP21115)Independent Research Project Funding Project of Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment Technology(FMZ201902).
文摘The molded pulp,a product of three-dimensional papermaking technology,is environmentally friendly and has a low environmental impact due to its ability to decompose quickly in the natural environment after disposal.The application of molded pulp for food packaging can replace or reduce the use of plastic food packaging.Researchers extract fibers from plants for the production of safe and hygienic molded pulp for food packaging,and they also study and enhance the qualities of molded pulp to broaden its use in the food industry.This paper reviews the sources and varieties of plant fiber used in molded pulp for food packaging,as well as research on the improvement and optimization of the performance of molded pulp products.Additionally,issues with molded pulp’s actual use for food packaging are reviewed,along with the potential for future research.This work can serve as a reference for molded pulp applications and research in the food industry in the future.
基金financial support from the China Postdoctoral Science Foundation (No. 2022M712379, No. 2021M692401)National Natural Science Foundation of China (No. 32101470)+3 种基金Foundation (No. 2021KF37) of Guangxi Key Laboratory of Clean Pulp & Papermaking and Pollution Control,College of Light Industry and Food Engineering, Guangxi UniversityFoundation of Tianjin Key Laboratory of Pulp & Paper of Tianjin University of Science & Technology (No. 202003, No. 202106)Research Foundation from the University of New BrunswickPost-Doctoral Fellow Programs from Zhejiang Jingxing Paper Co., Ltd
文摘Considering the serious barriers/issues induced by the accumulated starch generated in white water system of old corrugated cardboard(OCC)pulping process,large amounts of accumulated starch in white water would be decomposed by microorganisms and could not be utilized,thereby resulting in severe resource wastage and environmental pollution.This study mainly explored the effects of biodegradation/hydrolysis conditions of the two types of starch substrates(native starch and enzymatically(α-amylase)hydrolyzed starch),which were treated via microorganism degradation within the simulated white water from OCC pulping system and their biodegradation products on the key properties were characterized via X-ray diffraction(XRD),Fourier-transform infrared spectroscopy(FT-IR),and gel permeation chromatography(GPC)technologies.The effects of system temperature,pH value,starch concentration,and biodegradation time on starch biodegradation ratio and the characteristics of obtained biodegradated products from the two types of starches were studied.In addition,the effect ofα-amylase dosage on the biodegradation ratio of enzymatically hydrolyzed starch and its properties was investigated.It was found that the native starch presented a maximal degradation ratio at a system temperature of 55℃and pH value range of 5-7,respectively,the corresponding starch concentration within simulated white water system was 200 mg/L.Whereas the enzymatically hydrolyzed starch exhibited a highest degradation ratio at a system temperature of 50℃and pH value of 5.5,respectively,and the corresponding starch concentration within simulated white water system was 100 mg/L.It was verified that native starch is more readily bio-hydrolyzed and biodegradation-susceptive by microorganisms in simulated white water system of OCC pulping process,while the enzymatically hydrolyzed starch exhibits better biodegradation/hydrolysis resistance to the microbial degradation than that of native starch.This study provides a practical and interesting approach to investigate the starch hydrolysis or biodegradation behaviors in white water system of OCC pulping process,which would greatly contribute to the full recycling and valorized application of starch as a versatile additive during paperboard production.
文摘Carious lesions are bacteria-caused destructions of the mineralised dental tissues,marked by the simultaneous activation of immune responses and regenerative events within the soft dental pulp tissue.While major molecular players in tooth decay have been uncovered during the past years,a detailed map of the molecular and cellular landscape of the diseased pulp is still missing.In this study we used single-cell RNA sequencing analysis,supplemented with immunostaining,to generate a comprehensive single-cell atlas of the pulp of carious human teeth.Our data demonstrated modifications in the various cell clusters within the pulp of carious teeth,such as immune cells,mesenchymal stem cells(MSC)and fibroblasts,when compared to the pulp of healthy human teeth.Active immune response in the carious pulp tissue is accompanied by specific changes in the fibroblast and MSC clusters.These changes include the upregulation of genes encoding extracellular matrix(ECM)components,including COL1A1 and Fibronectin(FN1),and the enrichment of the fibroblast cluster with myofibroblasts.The incremental changes in the ECM composition of carious pulp tissues were further confirmed by immunostaining analyses.Assessment of the Fibronectin fibres under mechanical strain conditions showed a significant tension reduction in carious pulp tissues,compared to the healthy ones.The present data demonstrate molecular,cellular and biomechanical alterations in the pulp of human carious teeth,indicative of extensive ECM remodelling,reminiscent of fibrosis observed in other organs.This comprehensive atlas of carious human teeth can facilitate future studies of dental pathologies and enable comparative analyses across diseased organs.
基金Supported by Wuhan University of Science and Technology Startup Fund(Chu Tian Scholars Program),No.XZ2020024Open Laboratory Fund from Hubei Province Key Laboratory of Oral and Maxillofacial Development and Regeneration,No.2022kqhm005Hubei Provincial Health and Health Commission Research Project,No.WJ2023M121。
文摘Peripheral nerve injury(PNI)seriously affects people’s quality of life.Stem cell therapy is considered a promising new option for the clinical treatment of PNI.Dental stem cells,particularly dental pulp stem cells(DPSCs),are adult pluripotent stem cells derived from the neuroectoderm.DPSCs have significant potential in the field of neural tissue engineering due to their numerous advantages,such as easy isolation,multidifferentiation potential,low immunogenicity,and low transplant rejection rate.DPSCs are extensively used in tissue engineering and regenerative medicine,including for the treatment of sciatic nerve injury,facial nerve injury,spinal cord injury,and other neurodegenerative diseases.This article reviews research related to DPSCs and their advantages in treating PNI,aiming to summarize the therapeutic potential of DPSCs for PNI and the underlying mechanisms and providing valuable guidance and a foundation for future research.
基金supported by the Beijing Natural Science Foundation(2234090).
文摘Fiber screen fractionation of recycled old corrugated container(OCC)pulp and subsequent targeted processing of each fraction can lead to higher fiber quality,more uniform pulp,and increased handsheet strength and surface smoothness.This pilot-scale study evaluates the benefits of fiber fractionation using a pressure screen prior to low consistency(LC)refining.A 0.81-mm smooth holed screen cylinder is utilized,and two refiner plate patterns are adopted(wide 0.99 km/rev BEL and interim 2.01 km/rev BEL).Here,LC-refined reject fractions are mixed with the created microfibrillated cellulose(MFC),and the mixed pulp and paper qualities are compared with no-MFC OCC pulps.The results indicate that the highest tensile strength of the handsheet is obtained by the addition of MFC to the fractionated refined OCC pulp compared to the unfractionated refined OCC and primary OCC pulps at a given specific energy.Furthermore,the experimental approach adopted in this study can be used to optimize recycled OCC pulping systems.Overall,the results indicate that fractionated LC refining plus MFC addition provides higher pulp and paper qualities and the potential for saving energy to reach the desired tensile strength of the OCC pulp.
基金Supported by the National Natural Science Foundation of China(32072352)。
文摘To improve heating uniformity and anthocyanin content of the blueberry pulp under microwave heating,the intermittent variable power microwave heating technology was introduced in the study.The effects of technology parameters in terms of high microwave intensity heating time,intermittent time,low microwave intensity and low microwave intensity heating time on the blueberry pulp quality parameters(heating uniformity,average moisture content,the highest temperature and anthocyanin content)were investigated by using the response surface method.The results showed that the longer heating time under different microwave intensities resulted in the poorer heating uniformity.The intermittent stage promoted heat and mass transfer within the pulp and reduced the temperature difference and moisture gradient within the pulp,which enhanced desired uniformity of temperature and moisture distribution before entering the low microwave intensity heating stage.Therefore,the longer the intermittent time,the greater the heating uniformity.The optimal parameters were developed as high microwave intensity of 4 W·g^(-1),high microwave intensity heating time of 9.86 min,intermittent time of 10 min,low microwave intensity of 2.2 W·g^(-1)and low microwave intensity heating time of 6 min.This research might provide guidance for microwave heating berry fruits.
基金funding from the National Natural Science Foundation of China (Grant No. 50745048)Shaanxi Provincial Key Research and Development Project (Grant No. 2020 GY-105)Natural Science Basic Research Program of Shaanxi (Grant No. 2023-JC-QN-0154)。
文摘Power consumption is the energy source of the impact on fibers or pulp during low-consistency(LC)pulp refining,and the strength of refining affects refining quality and efficiency.The pulp properties,operating parameters,and bar parameters of the refiner plates are important parameters affecting refining efficiency,which can be defined as the ratio of net to total refining power.In this study,LC refining trials for pulps with different consistencies and fiber lengths were conducted using five isometric straightbar plates with different bar angles to explore the influences of the plate bar angle and pulp properties on the no-load power,impact capacity on fibers and refining efficiency.It was found that the no-load power of the LC refining process decreased with an increase in the plate bar angle while increased when pulp with higher consistency was refined under the same refining conditions.However,the effect of pulp consistency on the no-load power can be neglected when refining is conducted using plates with larger bar angles.Meanwhile,a critical bar angle for straight-bar plates in LC refining may exist,which has the strongest impact on the pulp and highest refining efficiency under the same refining conditions.In addition,the impact capacity of the plate on the pulp and refining efficiency in LC refining can be enhanced by appropriately increasing the pulp consistency and average fiber length when the bar angle of the refiner plate with a sector angle of 40°is less than 30°.Therefore,the efficiency and power consumption of the LC refining process can be adjusted by optimizing the pulp consistency and bar parameters of the refining plates.
文摘Background:Raphia fruit pulp is a good source of phytochemicals and some micronutrients and is locally consumed as a snack.The aim of this study was to valorize raphia pulp in biscuits production by partially substituting wheat flour in different proportions with flour obtained from the pulp of the raphia fruit.Methods:Ripe raphia(Raphia hookeri)fruits were purchased from local farms,thoroughly washed and the pulps extracted using a stainless-steel knife.These pulps were dried at 60℃for 12 h and grounded into flour.Wheat flour was substituted with the raphia pulp flour(RF)in five different proportions(10,20,30,35,and 40%).The functional properties and nutrient profile of the raphia flour and the biscuits obtained from these composite flours were evaluated.Sensory evaluation of the biscuits was also carried out using a nine-point hedonic scale.Results:The RF has a high-water absorption capacity WAC(680%)and oil absorption capacity OAC(560%)favoring its use in pastry processes.The RF is rich in polyphenols 435.0±20(μg/100g),saponins(155±5 mg/100g)and potassium(922±20 mg/100g).The incorporation of the RF in biscuits significantly affect the chemical composition.The total polyphenols increased from 182±10μg/100g in the sample containing 10%of RF to 342±17μg/100g in the sample containing 40%of RF.Fibers increased from 8.75±0.03 mg/100g in the sample with 10%of RF to 10.08±0.27 mg/100g in the 40%substituted biscuit.Saponins increased from 69.9±0.01 mg/100g in the sample with 10%of RF to 90.22±0.01 mg/100g in the sample with 40%RF and potassium increased from 434.2±10 mg/100g in the sample with 10%of RF to 647.6±5 mg/100g in the sample with 40%of RF.Biscuit samples made with composite flour containing 20%of RF was the most accepted.Conclusion:RF can be used as a raw material to replace 20%of wheat flour in biscuit formulations and improve its nutritional and sensory properties.
文摘The refining performances of mixed poplar and eucalyptwoodchips(mixture ratio 6:4)were investigated at medium and highpulp consistency via chemi-mechanical pulping(CMP).The specificrefining energy consumption(SEC),fiber fraction proportion,andCanadian standard freeness(CSF)were determined to evaluate the effectsof pulp consistency and NaOH dosage on the refining performancesof mixed poplar and eucalypt woodchips.While the dosage of NaOHfor impregnation was maintained constant,the SEC and shive contentincreased with increasing pulp consistency.Different fractions obtainedfrom the Bauer-McNett classifier showed that higher pulp consistencycould be expected to yield more long fibers and shive in the stock.Upon increasing the NaOH dosage,the shive content and SEC reducedsignificantly.When the NaOH dosage was increased to 6%,the resultsindicated that it was difficult to reduce the shive content to less than 1%athigh pulp consistencies(25%~35%),whereas 0.18%shive fraction couldbe achieved at a medium pulp consistency(15%).
基金financial support from the National Natural Science Foundation of China (31570569)
文摘Bamboo was used as raw material for unbleached pulp production.An acetic acid prehydrolysis process was employed before the pulping process.The effect of acetic acid prehydrolysis on pulp properties was investigated.The results showed that some components,such as hemicellulose and extractives,were degraded or dissolved in the prehydrolysis process prior to kraft pulping.SEM images of the substrate after treatment indicated that the parenchyma cell wall was thinner,and the size of pores between fiber bundle cell walls was larger.The pulping results showed that acetic acid prehydrolysis could improve the pulp quality and make the pulp easier to bleach.The brightness of the pulp reached 59.6%ISO with a single oxygen delignification step.The acetic acid prehydrolysis decreased pulp viscosity and fiber length,but not significantly.The amount of parenchyma cells in the pulp was reduced,which was beneficial for papermaking and improving mechanical strength of paper.This procedure has good potential for unbleached pulp production.
文摘Morphological characteristics and proximate chemical analysis of E. binata showed it as a suitable raw material for writing and printing grade paper. Maximum pulp yield (43.58%) of kappa number 17.38 with 0.9% screening rejects was obtained at 12% of active alkali (as Na2O) pulping temperature 130°C, cooking time 120 min and solid to liquor ratio 1:4. During bio-soda pulping of E. binata, pulp yield decreased slightly while pulp brightness, tensile index, burst index and double fold numbers were improved by 4.1%, 24.94%, 14.03% and 48.45% respectively compared to soda pulping. During ethanol-soda pulping of E. binata, pulp yield, pulp brightness, tensile index, burst index and double fold numbers were improved by 3.9%, 6.6%, 32.18%, 35.40% and 77.31% respectively compared to soda pulping.
基金the National Key Research and Development Program of China(2017YFB0307900,2019YFC1905903)the National Natural Science Foundation of China(31700507)the Major Project on the Integration of Industry-Education-Research of Fujian Provincial Department of Science and Technology(2018H6003).
文摘Hemicellulose has a wide range of applications,including that as an emulsifier for the food industry and raw material for the synthesis of bioethanol/biochemicals and biodegradable films.Hemicellulose is usually present as a spent liquor,such as the prehydrolysis liquor of the prehydrolysis kraft dissolving pulp production process and the alkali extraction liquor of the cold caustic extraction of pulp fibers.Due to its dilute nature,hemicellulose needs to be dried for practical utilization,and this is challenging.In this study,cellulose and hemicellulose in a bleached bamboo kraft pulp were separated using an alkali extraction process.Hemicellulose obtained from the extraction liquor was dried by an ammonium carbonate-assisted drying process.The effects of drying time and drying temperature were determined.Structure of the hemicellulose obtained by the ammonium carbonate-assisted drying process was similar to that of original hemicellulose,as revealed by detailed Fourier transform infrared and X-ray diffraction analyses.The novel drying method was more energy efficient and required a shorter drying time than the conventional freeze drying method,and the excellent solubility in alkaline solutions favored the chemical modification of hemicellulose.The dried hemicellulose can be used as a renewable raw material for the preparation of hydrogels and other substances such as bioethanol/biochemicals and biodegradable films.