Pre-heating temperature induced flowability and wax deposition characteristics of crude oil adding wax inhibitors

This paper investigated the effects of pre-heating treatment temperatures(T_(pre))on the flowability and wax deposition characteristics of a typical waxy crude oil after adding wax inhibitors.It is found that there is little difference in wax precipitation exothermic characteristics of crude oils at different T_(pre),as well as the wax crystal solubility coefficient in the temperature range of 25-30℃.For the undoped crude oil,the flowability after wax precipitation gets much improved and the wax deposition is alleviated as T_(pre)increasing.At T_(pre)=50℃,the viscosity and wax deposition rate of crude oil adding wax inhibitors are higher than those of the undoped crude oil.When the T_(pre)increases to 60,70,and 80℃,the flowability of the doped crude oil are largely improved and the wax deposition is suppressed with the T_(pre)increase,but the wax content of wax deposit increases gradually.It is speculated that,on the one hand,the T_(pre)increase helps the dispersion of asphaltenes into smaller sizes,which facilitates the co-crystallization with paraffin waxes and generates more aggregated wax crystal flocs.This weakens the low-temperature gel structure and increases the solid concentration required for the crosslink to form the wax deposit.On the other hand,the decrease in viscosity increases the diffusion rate of wax molecules and accelerates the aging of wax deposits.The experimental results have important guiding significance for the pipeline transportation of doped crude oils.

Conditioned medium from human dental pulp stem cells treats spinal cord injury by inhibiting microglial pyroptosis

Human dental pulp stem cell transplantation has been shown to be an effective therapeutic strategy for spinal cord injury.However,whether the human dental pulp stem cell secretome can contribute to functional recovery after spinal cord injury remains unclear.In the present study,we established a rat model of spinal cord injury based on impact injury from a dropped weight and then intraperitoneally injected the rats with conditioned medium from human dental pulp stem cells.We found that the conditioned medium effectively promoted the recovery of sensory and motor functions in rats with spinal cord injury,decreased expression of the microglial pyroptosis markers NLRP3,GSDMD,caspase-1,and interleukin-1β,promoted axonal and myelin regeneration,and inhibited the formation of glial scars.In addition,in a lipopolysaccharide-induced BV2 microglia model,conditioned medium from human dental pulp stem cells protected cells from pyroptosis by inhibiting the NLRP3/caspase-1/interleukin-1βpathway.These results indicate that conditioned medium from human dental pulp stem cells can reduce microglial pyroptosis by inhibiting the NLRP3/caspase-1/interleukin-1βpathway,thereby promoting the recovery of neurological function after spinal cord injury.Therefore,conditioned medium from human dental pulp stem cells may become an alternative therapy for spinal cord injury.

RPLP0/TBP are the most stable reference genes for human dental pulp stem cells under osteogenic differentiation

BACKGROUND Validation of the reference gene(RG)stability during experimental analyses is essential for correct quantitative real-time polymerase chain reaction(RT-qPCR)data normalisation.Commonly,in an unreliable way,several studies use genes involved in essential cellular functions[glyceraldehyde-3-phosphate dehydro-genase(GAPDH),18S rRNA,andβ-actin]without paying attention to whether they are suitable for such experimental conditions or the reason for choosing such genes.Furthermore,such studies use only one gene when Minimum Information for Publication of Quantitative Real-Time PCR Experiments guidelines recom-mend two or more genes.It impacts the credibility of these studies and causes dis-tortions in the gene expression findings.For tissue engineering,the accuracy of gene expression drives the best experimental or therapeutical approaches.We cultivated DPSCs under two conditions:Undifferentiated and osteogenic dif-ferentiation,both for 35 d.We evaluated the gene expression of 10 candidates for RGs[ribosomal protein,large,P0(RPLP0),TATA-binding protein(TBP),GAPDH,actin beta(ACTB),tubulin(TUB),aminolevulinic acid synthase 1(ALAS1),tyro-sine 3-monooxygenase/tryptophan 5-monooxygenase activation protein,zeta(YWHAZ),eukaryotic translational elongation factor 1 alpha(EF1a),succinate dehydrogenase complex,subunit A,flavoprotein(SDHA),and beta-2-micro-globulin(B2M)]every 7 d(1,7,14,21,28,and 35 d)by RT-qPCR.The data were analysed by the four main algorithms,ΔCt method,geNorm,NormFinder,and BestKeeper and ranked by the RefFinder method.We subdivided the samples into eight subgroups.RESULTS All of the data sets from clonogenic and osteogenic samples were analysed using the RefFinder algorithm.The final ranking showed RPLP0/TBP as the two most stable RGs and TUB/B2M as the two least stable RGs.Either theΔCt method or NormFinder analysis showed TBP/RPLP0 as the two most stable genes.However,geNorm analysis showed RPLP0/EF1αin the first place.These algorithms’two least stable RGs were B2M/GAPDH.For BestKeeper,ALAS1 was ranked as the most stable RG,and SDHA as the least stable RG.The pair RPLP0/TBP was detected in most subgroups as the most stable RGs,following the RefFinfer ranking.CONCLUSION For the first time,we show that RPLP0/TBP are the most stable RGs,whereas TUB/B2M are unstable RGs for long-term osteogenic differentiation of human DPSCs in traditional monolayers.

Effect of Conduction Pre-heating in Au-Al Thermosonic Wire Bonding

This paper presents the recent study by investigating the vital responses of wire bonding with the application of conduction pre-heating. It is observed through literature reviews that, the effect of pre-heating has not been completely explored to enable the successful application of pre-heating during wire bonding. The aim of wire bonding is to form quality and reliable solid-state bonds to interconnect metals such as gold wires to metalized pads deposited on silicon integrated circuits. Typically, there are 3 main wire bonding techniques applied in the industry;Thermo-compression, Ultrasonic and Thermosonic. This experiment utilizes the most common and widely used platform which is thermosonic bonding. This technique is explored with the application of conduction pre-heating along with heat on the bonding site, ultrasonic energy and force on an Au-Al system. Sixteen groups of bonding conditions which include eight hundred data points of shear strength at various temperature settings were compared to establish the relationship between bonding strength and the application of conduction pre-heating. The results of this study will clearly indicate the effects of applied conduction pre-heating towards bonding strength which may further produce a robust wire bonding system.

Implementation of Pre-Heating System in Stenters for Improving Machine Performance and Increasing Efficiency

In textile finishing, stenters always draw considerable attention to newer inventions to boost up production via maximum utilization of energy. Prior to main drying or heat-setting chambers, intermediate heating of cylindrical system especially by steam has a direct blessing to moisture evaporation, processing speed, fabric quality and so on. Based on actual operational data, this study reveals the outcomes of a pre-heating module installed within a stenter. After employing the pre-heating system to knit fabrics of different structures and compositions, 23% - 61% moisture reduction was found and the speed of processing fabrics was increased simultaneously by 17% - 30% without any compromise on fabric quality. Moreover, no less than 8.21% savings in annual electricity consumption were observed.

Effect of Pre-heating Temperature on Structural and Optical Properties of Sol-gel Derived Zn_(0.8)Cd_(0.2)O Thin Films

Zn_（0.8）Cd_（0.2）O thin films prepared using the spin-coating method were investigated. X-ray diffraction, scanning electron microscopy, and UV-Vis spectrophotometry were employed to illustrate the effects of the pre-heating temperature on the crystalline structure, surface morphology and transmission spectra of Zn_（0.8）Cd_（0.2）O thin films. When the thin films were pre-heated at 150 ℃, polycrystalline Zn O thin films were obtained. When the thin films were pre-heated at temperatures of 200 ℃ or higher, preferential growth of Zn O nanocrystals along the c-axis was observed. Transmission spectra showed that thin films with high transmission in the visible light range were prepared and effective bandgap energies of these thin films decreased from 3.19 e V to 3.08 e V when the pre-heating temperature increased from 150 ℃ to 300 ℃.

Multiple pulp stones emerge across all teeth during mixed dentition:A case report

BACKGROUND This paper reports a rare presentation of multiple pulp stones(PSs)emerging in all teeth during mixed dentition.It offers valuable insights into the clinical diagnosis,treatment,and prognosis of multiple PSs,shedding light on their occurrence during the mixed dentition period.CASE SUMMARY A 10-year-old girl presented with repeated pain in the mandibular right posterior teeth.Intraoral examination revealed carious lesions,abnormal tooth shapes,and anomalies in tooth number.Radiographic examinations showed multiple PSs with diverse shapes,sizes,and quantities in all teeth,alongside anomalies in tooth shape and number.Root canal therapy was initiated,but the patient initially lacked timely follow-up.Upon return for treatment completion,an extracted tooth revealed irregular calculus within the pulp cavity.CONCLUSION This case underscores the importance of considering multiple PSs in mixed dentition,necessitating comprehensive evaluation and management strategies.

Optimizing hemicelluloses pre-extraction in eucalyptus kraft pulping:A pathway towards enhancing pulp mill biorefineries

A critical pathway towards enhancing pulp mill biorefineries is to integrate the extraction and utilization of hemicelluloses into the pulping processes.Hence,an industrial pre-extraction strategy for hemicelluloses targeting eucalyptus kraft pulping process was developed.Alkaline solution or pulping white liquor was used to pre-extract hemicelluloses before the actual pulping process.The response surface methodology(RSM)technique was applied to investigate the most suitable conditions to maximize the yield of these hemicelluloses while simultaneously minimizing the damage to pulp yields and properties.Temperature(105 to 155℃),alkali concentration(3%to 8%),sulfidity(20%to 30%)and retention time(19 to 221 min)were combined to evaluate their effects on hemicellulose yields and chemical structures.The optimal pre-extraction conditions identified in this work(5.75%NaOH concentration,25%sulfidity at 135℃for 60 min)successfully allowed recovering 4.8%of hemicelluloses(based on the wood dry mass)and limited damages to pulp yields and properties.The cellulose content in pulp can even be increased by about 10%.Hemicellulose emulsification properties were also evaluated,which were comparable to synthetic emulsifiers.This study provides an industrial pathway to effectively separate and utilize wood hemicelluloses from the pulping process,which has the potential to improve the economy and material utilization of pulp and paper mills.

Adrenaline in pulp capping treatment of reversible pulpitis

BACKGROUND The role of epinephrine in the treatment of pulp capping in patients with reversible pulpitis is not clear.AIM To explore the role of epinephrine in the treatment of pulp capping in patients with reversible pulpitis.METHODS A total of 100 patients with reversible pulpitis who were treated in Anhui Jieshou People's Hospital from January 2020 to December 2021 were included in the study.They were categorized into an observation group(n=50;treatment with adrenaline)and a control group(n=50;treatment with zinc oxide eugenol paste).The 24-h postoperative pain,regression time of gingival congestion and redness,clinical efficacy,and incidence of adverse reactions were compared between the groups.Patients were further categorized into the ineffective and effective treatment groups based on clinical efficacy.Logistic multiple regression analysis explored factors affecting the efficacy of pulp capping treatment.RESULTS A significant difference in 24-h postoperative pain was observed between the groups(P<0.05),with a higher proportion of grade I pain noted in the observation group than in the control group(P<0.01).The regression time of gingival congestion and swelling was lower in the observation group(2.61±1.44 d and 2.73±1.36 d,respectively)than in the control group(3.85±1.47 d and 4.28±1.61 d,respectively)(P<0.05).The 2-wk postoperative total effective rate was lower in the control group(80.00%)than in the observation group(94.00%)(P<0.05).The incidence of adverse reactions was not significantly different between the control(14.00%)and observation(12.00%)groups(P>0.05).The proportion of adrenaline usage was lower(P<0.05)and that of anaerobic digestion by Streptococcus and Fusobacterium nucleatum was higher in the ineffective treatment group than in the effective treatment group(P<0.05).Logistic multiple regression analysis revealed adrenaline as a protective factor(P<0.05)and anaerobic digestion by Streptococcus and F.nucleatum as risk factors for pulp capping in reversible pulpitis(P<0.05).CONCLUSION Adrenaline demonstrated therapeutic efficacy in pulp capping treatment for reversible pulpitis,reducing pain and improving clinical symptoms safely.It is a protective factor for pulp capping,whereas Streptococcus and F.nucleatum are risk factors.Targeted measures can be implemented to improve clinical efficacy.

Mono Ethanol Amine (MEA) Pulping of Wheat Straw: An Environmentally Friendly Suggestion for the Fluff Pulp Production

This research aimed to investigate the effect of pulping conditions and refining intensities of wheat straw to be recommended for fluff pulp production.For this purpose,mono ethanol amine(MEA)was selected as a de-lignification agent at three levels of 50:50,25:75,and 15:85(MEA/water,W/V%),and soda-AQ 14 W/V%was used as a reference pulping.To investigate the optimal refining intensity,the obtained pulp was passed through a single disk laboratory refiner from 0 to 6 times and in two different consistencies(1.5 and 2.5 W/V%).Total yield,kappa number,ash content,and the Schopper-Riegler(SR°)freeness of the prepared pulps were investigated.Finally,hand sheets with a targeted basic weight of 70 g/m^(2) were made according to the related standards.The hand sheets were characterized using Fourier transform infrared(FTIR)spectroscopy and a field emission scanning electron microscope(FE-SEM).Sheet density,brightness,and mechanical properties such as burst,tensile,and tear indices were also investigated.The FE-SEM photographs showed that the texture of the hand sheet became denser as the refining intensity increased.External fibrillation on the surface of the fibers was also observed,especially on those refined with 2.5%consistency.The results of the chemical composition of wheat straw indicated that wheat straw containing a high percentage of holocellulose is an excellent candidate for the production of fluff pulp.The total yield and kappa number of MEA pulps increased with the decrease in MEA concentration.FTIR results indicated the presence of a peak related to amino groups in the pulp related to MEA pulp.The results also indicated that the mechanical properties of the papers,except for the tear index,were enhanced as the intensity of refining and the pulp consistency during refining increased.

Formulation of Infant Flours Based on Fonio Enriched with Bambara Groundnut Anacardium (Cashew) and African Locust Bean Fruit Pulp

Infant malnutrition is a significant issue in Côte d’Ivoire, and this study aims to address it by formulating infant flours using local ingredients. Fermentation, germination, and malting methods were used to enhance the quality of six formulated flours, all based on Fonio and supplemented with Bambara groundnut, African locust bean fruit pulp, and cashew kernels. Results showed that Fonio had the highest carbohydrate content, while Bambara groundnut and Cashew kernels were rich in protein and lipid content. African locust bean fruit pulp was rich in fiber and Vitamin C, with a high β-carotene value. The cashew kernel had the highest energy value. Regarding mineral composition, African locust bean fruit pulp had the highest potassium content, while Bambara groundnut and African locust bean fruit pulp were rich in sodium. Cashew kernel and Fonio had higher iron and calcium content. Bambara groundnut had a higher zinc content, while cashew kernel had a higher magnesium content. The formulated flours made from fermented Fonio grains and enriched with Bambara groundnut, African locust bean fruit pulp, and cashew kernel had varying protein, fiber, carbohydrate, ash, and fat contents. The flour formulated with sprouted Fonio and enriched with the same ingredients had higher protein content and energy value than the other fermented seed-based flours. The mixed flours produced with fermented seeds and the flour produced from sprouted seeds met international standards. Overall, these findings offer valuable insights into the nutritional composition of the formulated flours and their potential to combat infant malnutrition in Côte d’Ivoire.

Reducing Effect of Parkia biglobosa (Jacq.) R. Br. ex G. Don Fruit Pulp on Food Intake in Healthy NMRI Mice

Obesity is a chronic condition characterised by excess body fat that leads to increased body weight. One of the most effective ways to treat obesity is to use appetite suppressants to reduce food intake. This study aimed to evaluate in vivo reduction of food intake and weight gain caused by Parkia biglobosa (Pb) fruit pulp. Twenty-four healthy NMRI mice divided into four groups were used for the experiment. Group 1, considered the negative control, received distilled water. Groups 2, 3, and 4 were administered daily with 100, 250 and 500 mg/kg body weight of Pb fruit pulp powder suspension, respectively. The reduction in food intake was assessed in two phases: acute food intake for one day (24 h) and long-term food intake for seven weeks. Nutrient parameters and phenolic compounds in Pb fruit pulp were quantified. The results showed that Pb fruit pulp had a significant effect on reducing acute food intake. At a dose of 250 mg/kg, Pb had the best activity in reducing acute food intake, with an overall reduction rate of approximately 47.98% ± 1.17% compared to the control. Repeated daily administration inhibited food intake with all three doses for 13 days compared to control. Food intake was significantly decreased for up to 31 days by taking a 100 mg/kg dose of Pb (p = 0.0174). Weight gain was significantly lower (p = 0.0003) in mice treated with 100 mg/kg Pb than in controls at the end of 7 weeks. According to the nutritional composition study, Pb fruit pulp contains an abundance of total carbohydrates (68.81% ± 0.32%) and crude fiber (14.35% ± 0.21%). This study demonstrated that Pb fruit pulp effectively reduces food intake in healthy mice. Pb pulp’s richness in crude fiber and phenolic compounds makes it a potential aid in managing obesity.

Hepatocyte growth factor enhances the ability of dental pulp stem cells to ameliorate atherosclerosis in apolipoprotein E-knockout mice

BACKGROUND Atherosclerosis(AS),a chronic inflammatory disease of blood vessels,is a major contributor to cardiovascular disease.Dental pulp stem cells(DPSCs)are capable of exerting immunomodulatory and anti-inflammatory effects by secreting cytokines and exosomes and are widely used to treat autoimmune and inflam-mation-related diseases.Hepatocyte growth factor(HGF)is a pleiotropic cytokine that plays a key role in many inflammatory and autoimmune diseases.AIM To modify DPSCs with HGF(DPSC-HGF)and evaluate the therapeutic effect of DPSC-HGF on AS using an apolipoprotein E-knockout(ApoE-/-)mouse model and an in vitro cellular model.METHODS ApoE-/-mice were fed with a high-fat diet(HFD)for 12 wk and injected with DPSC-HGF or Ad-Null modified DPSCs(DPSC-Null)through tail vein at weeks 4,7,and 11,respectively,and the therapeutic efficacy and mechanisms were analyzed by histopathology,flow cytometry,lipid and glucose measurements,real-time reverse transcription polymerase chain reaction(RT-PCR),and enzyme-linked immunosorbent assay at the different time points of the experiment.An in vitro inflammatory cell model was established by using RAW264.7 cells and human aortic endothelial cells(HAOECs),and indirect co-cultured with supernatant of DPSC-Null(DPSC-Null-CM)or DPSC-HGF-CM,and the effect and mechanisms were analyzed by flow cytometry,RT-PCR and western blot.Nuclear factor-κB(NF-κB)activators and inhibitors were also used to validate the related signaling pathways.RESULTS DPSC-Null and DPSC-HGF treatments decreased the area of atherosclerotic plaques and reduced the expression of inflammatory factors,and the percentage of macrophages in the aorta,and DPSC-HGF treatment had more pronounced effects.DPSCs treatment had no effect on serum lipoprotein levels.The FACS results showed that DPSCs treatment reduced the percentages of monocytes,neutrophils,and M1 macrophages in the peripheral blood and spleen.DPSC-Null-CM and DPSC-HGF-CM reduced adhesion molecule expression in tumor necrosis factor-αstimulated HAOECs and regulated M1 polarization and inflammatory factor expression in lipopolysaccharide-induced RAW264.7 cells by inhibiting the NF-κB signaling pathway.CONCLUSION This study suggested that DPSC-HGF could more effectively ameliorate AS in ApoE-/-mice on a HFD,and could be of greater value in stem cell-based treatments for AS.

Human dental pulp stem/stromal cells in clinical practice

Dental pulp stem/stromal cells(DPSCs)are fibroblast-like,neural crest-derived,and multipotent cells that can differentiate into several lineages.They are relatively easy to isolate from healthy and inflamed pulps,with little ethical concerns and can be successfully cryopreserved and thawed.The therapeutic effects of DPSCs derived from animal or human sources have been extensively studied through in-vitro and in-vivo animal experiments and the findings indicated that DPSCs are effective not only for dental diseases but also for systemic diseases.Understanding that translational research is a critical step through which the fundamental scientific discoveries could be translated into applicable diagnostics and therapeutics that directly benefit humans,several clinical studies were carried out to generate evidence for the efficacy and safety of autogenous or allogeneic human DPSCs(hDPSCs)as a treatment modality for use in cell-based therapy,regenerative medicine/dentistry and tissue engineering.In clinical medicine,hDPSCs were effective for treating acute ischemic stroke and human exfoliated deciduous teeth-conditioned medium(SHED-CM)repaired vascular damage of the corpus cavernous,which is the main cause of erectile dysfunction.Whereas in clinical dentistry,autologous SHED was able to rege-nerate necrotic dental pulp after implantation into injured teeth,and micrografts enriched with autologous hDPSCs and collagen sponge were considered a treatment option for human intrabony defects.In contrast,hDPSCs did not add a significant regenerative effect when they were used for the treatment of post-extraction sockets.Large-scale clinical studies across diverse populations are still lacking to provide robust evidence on the safety and efficacy of hDPSCs as a new treatment option for various human diseases including dental-related problems.

Self-assembly of differentiated dental pulp stem cells facilitates spheroid human dental organoid formation and prevascularization

BACKGROUND The self-assembly of solid organs from stem cells has the potential to greatly expand the applicability of regenerative medicine.Stem cells can self-organise into microsized organ units,partially modelling tissue function and regeneration.Dental pulp organoids have been used to recapitulate the processes of tooth development and related diseases.However,the lack of vasculature limits the utility of dental pulp organoids.AIM To improve survival and aid in recovery after stem cell transplantation,we demonstrated the three-dimensional(3D)self-assembly of adult stem cell-human dental pulp stem cells(hDPSCs)and endothelial cells(ECs)into a novel type of spheroid-shaped dental pulp organoid in vitro under hypoxia and conditioned medium(CM).METHODS During culture,primary hDPSCs were induced to differentiate into ECs by exposing them to a hypoxic environment and CM.The hypoxic pretreated hDPSCs were then mixed with ECs at specific ratios and conditioned in a 3D environment to produce prevascularized dental pulp organoids.The biological characteristics of the organoids were analysed,and the regulatory pathways associated with angiogenesis were studied.RESULTS The combination of these two agents resulted in prevascularized human dental pulp organoids(Vorganoids)that more closely resembled dental pulp tissue in terms of morphology and function.Single-cell RNA sequencing of dental pulp tissue and RNA sequencing of Vorganoids were integrated to analyse key regulatory pathways associated with angiogenesis.The biomarkers forkhead box protein O1 and fibroblast growth factor 2 were identified to be involved in the regulation of Vorganoids.CONCLUSION In this innovative study,we effectively established an in vitro model of Vorganoids and used it to elucidate new mechanisms of angiogenesis during regeneration,facilitating the development of clinical treatment strategies.

Preparation and application of cationized pulp fiber as a papermaking wet-end additive

Cationized pulp fibers （CPF） were prepared by the adsorption of a novel biodegradable cationic ester quaternary ammonium salt （31441） on bleached softwood kraft pulp fibers. The optimized conditions for the CPF preparation were： 4% of 31441 （based on oven-dry pulp）, 80℃ and 30 rain. The CPF was characterized by FT-IR, SEM and XPS. Experimental results showed that the CPF improved the retention of precipitated calcium carbonate （PCC） filler significantly. With 0.9% CPF （based on oven-dry pulp）, the retention of PCC increased from 57.53% to 72.21%. The physical properties of paper were also slightly improved. The tensile strength and burst strength of the paper with CPF were higher than those with CPAM. CPF addition had no effect on the stock drainage.

光交联复合水凝胶支架中人牙髓干细胞的成骨/成牙分化能力

背景:甲基丙烯酸酐改性明胶(gelatin-methacryloyl,Gel-MA)与经处理牙本质基质(treated dentin matrix,TDM)在一定比例下经过紫外线交联后形成的复合水凝胶支架具有良好的孔隙率、机械性能、溶胀性能及生物降解率,这为临床上年轻恒牙的牙髓再生提供了新的思路和方法。目的:探究1∶2质量比Gel-MA/TDM复合光交联水凝胶支架对人牙髓干细胞增殖能力及成骨/成牙本质分化能力的影响。方法:将第3代牙髓干细胞接种至1∶2质量比Gel-MA/TDM复合水凝胶支架中,采用CCK-8实验检测人牙髓干细胞在复合水凝胶支架中的增殖能力。将第3代牙髓干细胞接种至1∶2质量比Gel-MA/TDM复合水凝胶支架中并进行成骨诱导,采用碱性磷酸酶染色及茜素红染色观察矿化结节的形成情况,采用RT-PCR检测成牙相关因子(牙本质基质蛋白1、牙本质涎磷蛋白)和成骨相关因子(骨钙素、Runt相关转录因子2)的基因表达。结果与结论:①CCK-8检测结果显示,前7 d的牙髓干细胞增殖能力明显升高,第10天时速度减缓;②碱性磷酸酶染色及茜素红染色结果显示,Gel-MA/TDM复合水凝胶组牙髓干细胞的碱性磷酸酶活性及矿化结节生成强于单纯Gel-MA水凝胶组(P<0.05);③RT-PCR结果显示,Gel-MA/TDM复合水凝胶组牙髓干细胞中牙本质基质蛋白1、牙本质涎磷蛋白、骨钙素、Runt相关转录因子2的基因表达量明显高于单纯Gel-MA水凝胶组(P<0.05),且14 d基因表达量明显高于7 d(P<0.05)。结果表明,培养在1∶2 Gel-MA/TDM复合水凝胶支架上的牙髓干细胞表现出较好的增殖能力,能够强化牙髓干细胞的成骨、成牙本质分化能力。

Pulpdent Multi-Cal用于年轻恒前牙活髓切断术的临床研究

目的:研究Pulpdent Multi-Cal(PMC)盖髓剂用于活髓切断术的临床可操作性和疗效,为临床应用提供参考依据。方法:对因冠折露髓到北京大学口腔医院急诊科就诊患者的上颌年轻恒前牙25颗(20例患者)进行活髓切断术,用PMC盖髓剂作为活髓保存剂,观察临床可操作性和操作时间,术后对患牙进行定期随访观察,复诊时记录患牙的临床检查和X线片检查情况,并与采用北京大学口腔医院自制制剂进行活髓切断术的患牙进行比较。结果:随访6～15个月(中位时间12个月),25颗患牙(20例患者)均于1～3个月间在X线片上观察到钙化桥的形成并持续增厚,牙根继续发育,无根内外吸收和根管钙化出现。应用PMC盖髓剂活髓切断术中操作时间显著缩短(P<0.01),术后牙根长度的发育与正常的中切牙差异无统计学意义(P>0.05)。结论:使用PMC盖髓剂进行活髓切断术取得了较满意的疗效,可以作为一种成品制剂应用于临床活髓切断术的常规治疗,有助于缩短临床操作时间、控制感染,也可为研究年轻恒牙活髓保存技术和新型盖髓剂提供统一的参照标准。

负载骨形态发生蛋白2水凝胶诱导牙髓干细胞的成骨分化

背景:前期研究证明,甲基丙烯酸酐改性明胶/经处理牙本质基质复合水凝胶支架可促进人牙髓干细胞的增殖及分化。水凝胶负载骨形态发生蛋白2被认为是骨修复中有前景的材料。目的:观察负载不同质量浓度骨形态发生蛋白2的甲基丙烯酸酐改性明胶/经处理牙本质基质复合水凝胶对人牙髓干细胞成骨向分化的诱导作用。方法:制备含0,50,100,200μg/mL骨形态发生蛋白2的甲基丙烯酸酐改性明胶/经处理牙本质基质复合水凝胶,分别记为GelMA/TDM、BMP-2(50 ng/mL)GelMA/TDM、BMP-2(100 ng/mL)GelMA/TDM、BMP-2(200 ng/mL)GelMA/TDM,检测复合水凝胶对骨形态发生蛋白2的体外缓释性能。采用改良组织块酶消化法提取人牙髓干细胞,分别接种于4种水凝胶表面,采用CCK-8法检测细胞增殖,DAPI染色检测细胞黏附;对各组水凝胶表面的人牙髓干细胞进行成骨诱导,进行碱性磷酸酶染色、碱性磷酸酶活性检测与茜素红染色,采用RT-PCR法检测相关成骨基因(Runx2、骨形态发生蛋白2、骨桥蛋白、骨钙素、Ⅰ型胶原)表达。结果与结论:①甲基丙烯酸酐改性明胶/经处理牙本质基质复合水凝胶可持续释放骨形态发生蛋白2长达21 d,在第3-6天释放较快,第6天之后释放趋于平稳;②4种水凝胶均可促进人牙髓干细胞的增殖,其中以BMP-2(100 ng/mL)-GelMA/TDM复合水凝胶的作用最明显;相较于GelMA/TDM复合水凝胶,BMP-2-GelMA/TDM复合水凝胶可促进人牙髓干细胞的黏附,其中以BMP-2(200 ng/mL)-GelMA/TDM复合水凝胶的作用最明显;③相较于GelMA/TDM复合水凝胶,BMP-2-GelMA/TDM复合水凝胶可提升碱性磷酸酶活性、钙结节含量与相关成骨基因表达,综合分析显示BMP-2(100 ng/mL)-GelMA/TDM复合水凝胶的作用更明显;④结果表明,BMP-2(100 ng/mL)-GelMA/TDM复合水凝胶促进牙髓干细胞成骨向分化的能力更明显。

促红细胞生成素干预牙髓损伤后修复性牙本质形成及骨形态发生蛋白2的表达

背景:促红细胞生成素具有抗炎、抗凋亡、促进骨缺损修复等作用,目前关于促红细胞生成素对牙髓损伤后修复性牙本质形成及其相关分子机制的研究较少。目的:探究促红细胞生成素对牙髓损伤后修复性牙本质形成的影响。方法:(1)动物实验:采用随机数字表法将32只大鼠随机分为对照组(n=16)与实验组(n=16),实验组牙髓损伤处使用含促红细胞生成素的胶原蛋白海绵直接盖髓,对照组露牙髓损伤处使用含PBS的胶原蛋白海绵直接盖髓,用玻璃离子粘固剂封闭窝洞;治疗2,4周后取上颌骨,采用免疫组化染色检测巢蛋白在牙本质中的表达,苏木精-伊红染色观察修复性牙本质生成。取4只SD大鼠上颌骨,免疫组化染色检测磨牙与切牙中促红细胞生成素表达。(2)细胞实验:从人牙髓组织、牙周韧带组织及牙龈组织中分别分离获取人牙髓细胞、人牙周韧带细胞和人牙龈成纤维细胞,采用RT-PCR检测促红细胞生成素mRNA表达。在成牙本质细胞诱导或未诱导分化条件下,采用RT-PCR检测人牙髓细胞中促红细胞生成素、牙本质涎磷蛋白、牙本质基质蛋白1、巢蛋白m RNA表达。在成牙本质细胞诱导或未诱导分化条件下,下调促红细胞生成素表达或外源性给予促红细胞生成素干预后,采用RT-PCR检测人牙髓细胞牙本质涎磷蛋白、牙本质基质蛋白1 mRNA相对表达,茜素红S染色检测矿化结节形成,RT-PCR与Western blotting检测骨形态发生蛋白2 mRNA与蛋白表达。结果与结论:(1)动物实验:与对照组相比,实验组治疗2,4周后的修复性牙本质生成量更大,牙本质中巢蛋白表达更高。促红细胞生成素在大鼠上颌第一磨牙牙髓、成牙本质细胞层和牙周膜中呈弱阳性表达,在成牙本质细胞中呈强阳性表达。(2)细胞实验:与其他两种细胞相比,人牙髓细胞中的促红细胞生成素m RNA表达更高。与未诱导分化相比,成牙本质细胞诱导分化下人牙髓细胞中牙本质涎磷蛋白、牙本质基质蛋白1、巢蛋白、促红细胞生成素与骨形态发生蛋白2 mRNA表达升高,矿化结节生成增加。在成牙本质细胞诱导分化下,下调促红细胞生成素表达后人牙髓细胞中牙本质涎磷蛋白、牙本质基质蛋白1、巢蛋白、骨形态发生蛋白2 mRNA表达与矿化结节生成均降低,骨形态发生蛋白2蛋白表达降低;外源性给予促红细胞生成素干预后,人牙髓细胞中上述指标表达均升高。(3)结果表明:促红细胞生成素对牙本质形成具有一定的促进作用。