Electrokinetic-mechanism of water and furfural oxidation on pulsed laser-interlaced Cu_(2)O and CoO on nickel foam

The electrocatalytic oxidation of biomass-derived furfural(FF)feedstocks into 2-furoic acid(FA)holds immense industrial potential in optics,cosmetics,polymers,and food.Herein,we fabricated Co O/Ni O/nickel foam(NF)and Cu_(2)O/Ni O/NF electrodes via in situ pulsed laser irradiation in liquids(PLIL)for the bifunctional electrocatalysis of oxygen evolution reaction(OER)and furfural oxidation reaction(FOR),respectively.Simultaneous oxidation of NF surface to NiO and deposition of CoO and/or Cu_(2)O on NF during PLIL offer distinct advantages for enhancing both the OER and FOR.CoO/NiO/NF electrocatalyst provides a consistently low overpotential of~359 m V(OER)at 10 m A/cm^(2),achieving the maximum FA yield(~16.37 m M)with 61.5%selectivity,79.5%carbon balance,and a remarkable Faradaic efficiency of~90.1%during 2 h of FOR at 1.43 V(vs.reversible hydrogen electrode).Mechanistic pathway via in situ electrochemical-Raman spectroscopy on CoO/NiO/NF reveals the involvement of phase transition intermediates(NiOOH and CoOOH)as surface-active centers during electrochemical oxidation.The carbonyl carbon in FF is attacked by hydroxyl groups to form unstable hydrates that subsequently undergo further oxidation to yield FA products.This method holds promise for large-scale applications,enabling simultaneous production of renewable building materials and fuel.

Fifty Cases of Chloasma Treated by Acupuncture plus Intensive Pulse Light Irradiation

Objective: To observe the clinical therapeutic effect of acupuncture plus intensive pulse light irradiation on chloasma. Methods: Ninety-six cases of chloasma were randomly divided into two groups, the control group of 46 cases treated by simple acupuncture and the treatment group of 50 cases treated by acupuncture and intensive pulse light irradiation. Results: The total effective rate was 89.1% and 98.0% in the control group and treatment group respectively, with a significant difference between the two groups (P<0.05). Conclusion: For chloasma, the effect of treatment with acupuncture plus intensive pulse light irradiation is superior to that with simple acupuncture.

Hydrodynamic Effects on Surface Morphology Evolution of Titanium Alloy under Intense Pulsed Ion Beam Irradiation

The hydrodynamic effects of molten surface of titanium alloy on the morphology evolution by intense pulsed ion beam （IPIB） irradiation are studied. It is experimentally revealed that under irradiation of IPIB pulses, the surface morphology of titanium alloy in a spatial scale of μm exhibits an obvious smoothening trend. The mechanism of this phenomenon is explained by the mass transfer caused by the surface tension of molten metal. Hydrodynamic simulation with a combination of the finite element method and the level set method reveals that the change in curvature on the molten surface leads to uneven distribution of surface tension. Mass transfer is caused by the relief of surface tension, and meanwhile a flattening trend in the surface morphology evolution is achieved.

Manifolding active sites and in situ/operando electrochemical-Raman spectroscopic studies of single-metal nanoparticle-decorated CuO nanorods in furfural biomass valorization to H_(2) and 2-furoic acid

Here,CuO nanorods fabricated via pulsed laser ablation in liquids were decorated with Ir,Pd,and Ru NPs(loading~7 wt%) through pulsed laser irradiation in the liquids process.The resulting NPs-decorated CuO nanorods were characterized spectroscopically and employed as multifunctional electrocatalysts in OER,HER,and the furfural oxidation reactions(FOR).Ir-CuO nanorods afford the lowest overpotential of~345 mV(HER) and 414 mV(OER) at 10 mA cm^(-2),provide the highest 2-furoic acid yield(~10.85 mM) with 64.9% selectivity,and the best Faradaic efficiency~72.7% in 2 h of FOR at 1.58 V(vs.RHE).In situ electrochemical-Raman analysis of the Ir-CuO detects the formation of the crucial intermediates,such as Cu(Ⅲ)-oxide,Cu(OH)_(2),and Ir_x(OH)_y,on the electrode-electrolyte surface,which act as a promoter for HER and OER.The Ir-CuO ‖ Ir-CuO in a coupled HER and FOR-electrolyzer operates at~200 mV lower voltage,compared with the conventional electrolyzer and embodies the dual advantage of energy-saving H_(2) and 2-furoic acid production.

Impact of TID on response to pulsed X-ray irradiation in the bipolar operational amplifier

Groups of a typical operational amplifier-μA741 were irradiated in a cobalt unit, each group accumulating a different total ionizing dose （TID）. The results showed that the TID caused power consumption current and slew rate （SR） to degenerate in ultra-linearity, owing to a severe reduction in the current gain of the internal LPNP transistors. Pulsed X-ray irradiation experiments were carried out on the μA741 groups with different values, and the results revealed that the impact on the response to the pulsed X-ray irradiation was greater when the devices absorbed more TID. The mechanism for this is explained on the basis of the circuit construction of the μA741; the sensitive parameters of the circuit were obtained via simulation on SP1CE. The simulation results additionally showed that if the sensitive parameters were optimized, the duration of interruption caused by the pulsed X-ray irradiation would be reduced significantly. In addition, several proposals are provided for hardening the devices.

Gastroscopy-conjugated photoacoustic and ultrasonic dual-mode imaging for detection of submucosal gastric cancer:in vitro study

This paper presents photoacoustic and ultrasonic dual-mode imaging for real-time detection of submucosal gastric cancer with a combination of gastroscopy.The diagnostic capacity was directly addressed via several phantoms and ex vivo experiments.Results demonstrated that superficial and submucosal gastric cancer can be diagnosed with a perceptible depth of 6.33 mm,a lateral accuracy of 2.23 mm,and a longitudinal accuracy of 0.17 mm though capturing the morphology of angiogenesis,which is a main character of the therioma-related change.The capability of gastroscopy-conjugated photoacoustic and ultrasonic dual-mode imaging system will own great potential in improving the clinical diagnostic rate of submucosal gastric cancer.

Effect of Ultrashort Pulsed Laser and X-Ray Irradiation on Au^+ -Doped Glass

Au nanoparticles were precipitated inside Au+-doped glass samples after irradiation by femtosecond laser or x-ray. Femtosecond laser and X-ray irradiation result in decreasing of anneal temperature and critical size for the precipitation of Au nanoparticles.

Surface alloying of Al films/Ti substrate based on high-current pulsed electron beams irradiation

Ti–Al surface alloy was fabricated using a cyclic pulsed liquid-phase mixing of predeposited 100 nm Al film with a-Ti substrate by low-energy high-current electron beam. Electron probe micro-analysis（EPMA）,grazing incidence X-ray diffraction analysis（GIXRD）,transmission electron microscopy（TEM）, and nanoindentation were used to investigate the characterization of Ti–Al surface alloy. The experimental results show that the thickness of alloy layer is ＊3 lm, and the content of Al in the ＊1 lm thickness surface layer is ＊60 at%. The tetragonal TiAl and TiAl2intermetallics were synthesized at the top surface, which have nanocrystalline structure.The main phase formed in the ＊2.5 lm thick surface is TiAl, and there are few TiAl2and Ti3Al phase for the alloy.Dislocation is enhanced in the alloyed layer. The nanohardness of Ti–Al surface alloy increased significantly compared with a-Ti substrate due to the nanostructure and enhanced dislocation. Since the e-beam remelted repeatedly, the Ti–Al surface alloy mixed sufficiently with Ti substrate. Moreover, there is no obvious boundary between the alloyed layer and substrate.

Laser-enhanced thermal effect of moderate intensity focused ultrasound on bio-tissues

For avoiding extra-damage to healthy tissues surrounding the focal point during high intensity focused ultrasound(HIFU) treatment in medical therapy, to reduce the ultrasonic intensity outside the focal point is expected. Thus, the heating processes induced by moderate intensity focused ultrasound(MIFU) and enhanced by combined irradiation of laser pulses for bio-tissues are studied in details. For fresh bio-tissues, the enhanced thermal effects by pulsed laser combined with MIFU irradiation are observed experimentally. To explore the mechanisms of these effects, several tissue-mimicking materials composed of agar mixed with graphite powders are prepared and studied for comparison, but the laser-enhanced thermal effects in these mimicking materials are much less than that in the fresh bio-tissues. Therefore, it is suggested that the laser-enhanced thermal effects may be mainly attributed to bio-activities and related photo-bio-chemical effects of fresh tissues.

Embedding laser generated GaAs nanocrystals in perovskite wires for enhanced charge transport and photodetection

Solution-processed perovskite wires are attractive candidates for photodetectors(PDs)due to their simple processibility as well as one-dimensional(1D)geometry with desirable charge carrier transport.However,the performance of the perovskite PDs is generally restricted by the charge carrier transport and extraction efficiency.Herein,we demonstrate that the charge transport and the consequent photodetection performance of MAPbI_(3)perovskite wires can be effectively enhanced by incorporating nanocrystals(NCs)of GaAs-a semiconductor with high charge carrier mobility.Taking advantage of the pulsed laser irradiation technique,we successfully fabricate ligand-free GaAs NCs with a size of~7 nm and homogeneously embed them in MAPbI_(3) perovskite wires through a simple solution-processed synthesis route.Compared with the pristine perovskite wires,the GaAs NCs modulated perovskite wires show improved charge carrier transport with the mobility rising from 1.13 to 3.67 cm^(2)V^(-1)s^(-1),and the resultant PD shows significant improvement in responsivity and detectivity.This study provides a new strategy for improving optoelectronic properties of halide perovskite materials and optimizing the device performance.