We demonstrate an all-fiberized narrow-linewidth nanosecond amplifier with high peak power,tunable pulse width,and repetition rate.A fiber-coupled narrow-linewidth laser diode operating at 1064.1 nm is employed as the...We demonstrate an all-fiberized narrow-linewidth nanosecond amplifier with high peak power,tunable pulse width,and repetition rate.A fiber-coupled narrow-linewidth laser diode operating at 1064.1 nm is employed as the seed source,which is gain-switched to generate nanosecond pulses with tunable pulse widths of 1-200 ns and tunable repetition rates of10 Hz-100 kHz.By utilizing a very-large-mode-area Yb-doped fiber with a core diameter of 50 μm in the power amplifier,thresholds of the stimulated Brillouin scattering at different pulse widths and repetition rates are increased.The maximum average power reaches 30.8 W at the pulse width of 4 ns and a repetition rate of 100 kHz,corresponding to an optical-tooptical conversion efficiency of ~55.2%.Pulse energy and peak power are calculated to be 0.2 mJ and 50 kW,respectively,which are limited by stimulated Brillouin scattering.The 3-dB spectral linewidth remains around 0.05 nm during the power scaling process.The stimulated Brillouin scattering limited output powers at different pulse widths and repetition rates are investigated.Peak power of 47.5 kW(0.19 mJ) is obtained for the 4 ns pulses at a repetition rate of 50 kHz,which is nearly the same as that of 4 ns pulses at 100 kHz.When the pulse width of the seed source is increased to 8 ns,peak powers/pulse energies are decreased to 19.6 kW/0.11 mJ and 13.3 kW/0.08 mJ at repetition rates of 50 kHz and 100 kHz,respectively.展开更多
How to define digitalization? What are the major contents of the digitization of the shipping industry? What challenges thedigitalization of the shipping industry will face in the process of transformation? The journa...How to define digitalization? What are the major contents of the digitization of the shipping industry? What challenges thedigitalization of the shipping industry will face in the process of transformation? The journalist interviewed Zhuang Wei, the General Manager (Digital Shipping Project Consultant) of Asian area of the Baltic and International Maritime Council (BIMCO) with the abovementioned questions, and ask him to “feel the pulse” of the digitization of shipping.展开更多
To investigate the creep and instability properties of a cemented gangue backfill column under a highstress area,the uniaxial compression creep tests were conducted by single-step and multi-step loading of prismatic s...To investigate the creep and instability properties of a cemented gangue backfill column under a highstress area,the uniaxial compression creep tests were conducted by single-step and multi-step loading of prismatic samples made of cemented gangue backfill material(CGBM)under the high stressstrength ratio.The creep damage was monitored using an electrical resistivity device,ultrasonic testing device,and acoustic emission(AE)instrument.The results showed that the CGBM sample has a creep hardening property.The creep failure strength(CFS)is slightly larger than the uniaxial compressive strength(UCS),ranging in ratio from 108.9%to 116.5%.The instantaneous strain,creep strain,and creep rate increase with increasing stress-strength ratio in the single-step loading creep tests.The instantaneous strain and creep strain decrease first and then increase during the multi-step loading creep process.The axial creep strain of the CGBM column can be expressed by the viscoelastic-plastic creep model.Creep instability is caused by the accumulation of strain energy under multi-step loading and the continuous lateral expansion at the unconstrained middle position during the creep process.The creep stability of a CGBM column in a high-stress area can be monitored based on the variation of electrical resistivity,ultrasonic pulse velocity(UPV),and AE signals.展开更多
A novel simple method based on pulse area analysis (PAA) is presented for acquisition of nuclear spectra by a digitizer. The PAA method can be used as a substitute for the traditional method of pulse height analysis...A novel simple method based on pulse area analysis (PAA) is presented for acquisition of nuclear spectra by a digitizer. The PAA method can be used as a substitute for the traditional method of pulse height analysis (PHA). In the PAA method a commercial digitizer was employed to sample and sum in the pulse, and the area of the pulse is proportional to the energy of the detected radiation. The results of simulation and experiment indicate the great advantages of the PAA method, especially as the count rate is high and the shaping time constant is small. When the shaping time constant is 0.5 μs, the energy resolution of PAA is about 66% better than that of PHA.展开更多
从级联H桥型逆变器的脉冲本质出发,引入一组表征脉宽调制(pulse width modulation,PWM)特性的中间变量,称之为脉冲净面积(pulse net area,PNA),以此为基础讨论级联H桥中PWM脉冲模型,给出基于不同优化约束条件下的PWM模型和相关实现,提...从级联H桥型逆变器的脉冲本质出发,引入一组表征脉宽调制(pulse width modulation,PWM)特性的中间变量,称之为脉冲净面积(pulse net area,PNA),以此为基础讨论级联H桥中PWM脉冲模型,给出基于不同优化约束条件下的PWM模型和相关实现,提出三种改进型PWM的实现方法。实验结果表明,该脉冲模型正确可行,可用于评估PWM调制方法的特性,并从提高系统的谐波特性和降低开关损耗等方面实现对PWM调制方法的优化。展开更多
基金Project supported by the National Natural Science Foundation of China (Grant No. 61675009)the Beijing Natural Science Foundation Program, China,Scientific Research Key Program of Beijing Municipal Education Commission, China (Grant No. KZ201910005006)
文摘We demonstrate an all-fiberized narrow-linewidth nanosecond amplifier with high peak power,tunable pulse width,and repetition rate.A fiber-coupled narrow-linewidth laser diode operating at 1064.1 nm is employed as the seed source,which is gain-switched to generate nanosecond pulses with tunable pulse widths of 1-200 ns and tunable repetition rates of10 Hz-100 kHz.By utilizing a very-large-mode-area Yb-doped fiber with a core diameter of 50 μm in the power amplifier,thresholds of the stimulated Brillouin scattering at different pulse widths and repetition rates are increased.The maximum average power reaches 30.8 W at the pulse width of 4 ns and a repetition rate of 100 kHz,corresponding to an optical-tooptical conversion efficiency of ~55.2%.Pulse energy and peak power are calculated to be 0.2 mJ and 50 kW,respectively,which are limited by stimulated Brillouin scattering.The 3-dB spectral linewidth remains around 0.05 nm during the power scaling process.The stimulated Brillouin scattering limited output powers at different pulse widths and repetition rates are investigated.Peak power of 47.5 kW(0.19 mJ) is obtained for the 4 ns pulses at a repetition rate of 50 kHz,which is nearly the same as that of 4 ns pulses at 100 kHz.When the pulse width of the seed source is increased to 8 ns,peak powers/pulse energies are decreased to 19.6 kW/0.11 mJ and 13.3 kW/0.08 mJ at repetition rates of 50 kHz and 100 kHz,respectively.
文摘How to define digitalization? What are the major contents of the digitization of the shipping industry? What challenges thedigitalization of the shipping industry will face in the process of transformation? The journalist interviewed Zhuang Wei, the General Manager (Digital Shipping Project Consultant) of Asian area of the Baltic and International Maritime Council (BIMCO) with the abovementioned questions, and ask him to “feel the pulse” of the digitization of shipping.
基金supported by the National Natural Science Foundation of China(No.51974192)Shanxi Province Postgraduate Education Innovation Project(No.2020SY567)+2 种基金the Applied Basic Research Project of Shanxi Province(No.201801D121092)Distinguished Youth Funds of National Natural Science Foundation of China(No.51925402)Shanxi Science and Technology Major Project(No.20201102004)。
文摘To investigate the creep and instability properties of a cemented gangue backfill column under a highstress area,the uniaxial compression creep tests were conducted by single-step and multi-step loading of prismatic samples made of cemented gangue backfill material(CGBM)under the high stressstrength ratio.The creep damage was monitored using an electrical resistivity device,ultrasonic testing device,and acoustic emission(AE)instrument.The results showed that the CGBM sample has a creep hardening property.The creep failure strength(CFS)is slightly larger than the uniaxial compressive strength(UCS),ranging in ratio from 108.9%to 116.5%.The instantaneous strain,creep strain,and creep rate increase with increasing stress-strength ratio in the single-step loading creep tests.The instantaneous strain and creep strain decrease first and then increase during the multi-step loading creep process.The axial creep strain of the CGBM column can be expressed by the viscoelastic-plastic creep model.Creep instability is caused by the accumulation of strain energy under multi-step loading and the continuous lateral expansion at the unconstrained middle position during the creep process.The creep stability of a CGBM column in a high-stress area can be monitored based on the variation of electrical resistivity,ultrasonic pulse velocity(UPV),and AE signals.
基金Supported by National Natural Science Foundation of China(11375077,11027508)
文摘A novel simple method based on pulse area analysis (PAA) is presented for acquisition of nuclear spectra by a digitizer. The PAA method can be used as a substitute for the traditional method of pulse height analysis (PHA). In the PAA method a commercial digitizer was employed to sample and sum in the pulse, and the area of the pulse is proportional to the energy of the detected radiation. The results of simulation and experiment indicate the great advantages of the PAA method, especially as the count rate is high and the shaping time constant is small. When the shaping time constant is 0.5 μs, the energy resolution of PAA is about 66% better than that of PHA.
文摘从级联H桥型逆变器的脉冲本质出发,引入一组表征脉宽调制(pulse width modulation,PWM)特性的中间变量,称之为脉冲净面积(pulse net area,PNA),以此为基础讨论级联H桥中PWM脉冲模型,给出基于不同优化约束条件下的PWM模型和相关实现,提出三种改进型PWM的实现方法。实验结果表明,该脉冲模型正确可行,可用于评估PWM调制方法的特性,并从提高系统的谐波特性和降低开关损耗等方面实现对PWM调制方法的优化。