Indirect Vector Control of Linear Induction Motors Using Space Vector Pulse Width Modulation

Vector control schemes have recently been used to drive linear induction motors(LIM)in high-performance applications.This trend promotes the development of precise and efficient control schemes for individual motors.This research aims to present a novel framework for speed and thrust force control of LIM using space vector pulse width modulation(SVPWM)inverters.The framework under consideration is developed in four stages.To begin,MATLAB Simulink was used to develop a detailed mathematical and electromechanical dynamicmodel.The research presents a modified SVPWM inverter control scheme.By tuning the proportional-integral(PI)controller with a transfer function,optimized values for the PI controller are derived.All the subsystems mentioned above are integrated to create a robust simulation of the LIM’s precise speed and thrust force control scheme.The reference speed values were chosen to evaluate the performance of the respective system,and the developed system’s response was verified using various data sets.For the low-speed range,a reference value of 10m/s is used,while a reference value of 100 m/s is used for the high-speed range.The speed output response indicates that themotor reached reference speed in amatter of seconds,as the delay time is between 8 and 10 s.The maximum amplitude of thrust achieved is less than 400N,demonstrating the controller’s capability to control a high-speed LIM with minimal thrust ripple.Due to the controlled speed range,the developed system is highly recommended for low-speed and high-speed and heavy-duty traction applications.

Realization of Space Vector Pulse Width Modulation Method Based on DSP

In order to compensate for the deficiency of Sine Pulse Width Modulation（SPWM）, on the base of analyzing the principle of space w tot pulse width modulation and being compared with SPWM, the method of solving working time of adjacent vector and the method of generate space voltage vector were introduced. The experiment to the inverter which consists of IGBT proves that SVPWM centrol algorithm can reduce harmonic effectively, it is beneficial to enhancing the utilization rate of voltage source inverter direct current power supply.

An Improved Hybrid Space Vector PWM Technique for IM Drives

In this paper, an improved hybrid space vector pulse width modulation (HSVPWM) technique is proposed for IM (induction motor) drives. The basic principle involved in the proposed random pulse width modulation (RPWM) cuddled SVPWM is amalgamating the pre-calculated switching timings for various sections of hexagonal space vector boundary and the random selection of carrier between two triangular signals, in order to disband acoustic switching noise spectrum with improved fundamental component. The arbitrary selection between triangular carriers, which is decided by digital signal states (Low or High) of the linear feedback shift register (LFSR) based pseudo random binary sequence (PRBS) generator. The SVPWM offers a control degree of freedom in terms of positioning of vectors inside every sampling interval and hence it has six possible variants of the voltage vectors arrangements in each sector. The developed HSVPWM is thoroughly analyzed in using the MATLAB? based simulation for all SVPWM variants. From the simulation and experimental results viz. harmonic spectrum, harmonic spread factor (HSF), total harmonic distortion (THD) etc., and the superiority of the proposed scheme such as better utilization of DC bus and the randomization of the harmonic power are evidenced. For the practical implementation, Xilinx XC3S500E FPGA device has been used.

Dual-frequency Discontinuous Space Vector Pulse Width Modulation for Five-phase Voltage Source Inverters with Harmonic Injection

This paper proposes a dual-frequency discontinuous space vector pulse width modulation(DFDSVPWM)for a five-phase voltage source inverter with harmonic injection.In this modulation,for dual-frequency voltage output and reduction of switching losses,two different zero-vector-inserted modes are flexibly employed by alternatively using two types of zero vectors.Based on the comparison with continuous SVPWM,the idea and principle of the proposed DFDSVPWM are analyzed and an example of PWM signals for one bridge is also presented.For switching losses analysis,the impact factors and the calculation method are investigated and the corresponding implementation is given as well.The simulation and experimental results from a prototype verify the correctness and effectiveness of the proposed modulation and it has the advantages of outputting dual-frequency voltage and reducing switching losses.

Regenerative Braking Strategy for Motor Hoist by Ultracapacitor

Rising concern in environmental issues on global scale has made energy saving in powered equipment a very important subject.In order to improve the energy efficiency and driving range of a motor hoist,a regenerative braking system is designed and discussed.The system takes a unique ultracapacitor-only approach to energy storage system.The bi-directional bride DC？DC converter which regulates current flow to and from the ultracapacitor operates in two modes：boost and buck,depending on the direction of the flow.In order to provide constant input and output current at the ultracapacitor,this system uses a double proportional-integral（PI） control strategy in regulating the duty cycle of PWM to the DC？DC converter.The permanent magnet synchronous motor（PWSM） drive system is also studied.The space vector pulse width modulation（SVPWM） technique,along with a two-closed-loop vector control model,is adopted after detailed analysis of PMSM characteristics.The overall model and control strategy for this regenerative braking system is ultimately built and simulated under the MATLAB and Simulink environment.A test platform is built to obtain experimental results.Analysis of the results reveals that more than half of the gravitational potential energy can be recovered by this system.Simulation and experimentation results testify the validity of the double PI control strategy for interface circuit of ultracapacitor and SVPWM strategy for PMSM.

Grid-connected inverter for wind power generation system

In wind power generation system the grid-connected inverter is an important section for energy conversion and transmission, of which the performance has a direct influence on the entire wind power generation system. The mathematical model of the grid-connected inverter is deduced firstly. Then, the space vector pulse width modulation （SVPWM） is analyzed. The power factor can be controlled close to unity, leading or lagging, which is realized based on H-type current controller and grid voltage vector-oriented control. The control strategy is verified by the simulation and experimental results with a good sinusoidal current, a small harmonic component and a fast dynamic response.

Improved VSVPWM Modulation Method for Three-level NPC Inverter in Rural Power Grid

With the acceleration of agricultural electrification,a lot of nonlinear and shock loads appear in the rural power grid,and the resulting harmonic and reactive currents pollute the rural power grid more and more seriously.To solve the above problem,three-level neutral point clamped(NPC)inverters have been widely used,but their development is greatly restricted by the defect of neutral point voltage imbalance.In this paper,an improved virtual space vector pulse width modulation(VSVPWM)was proposed.Firstly,the mathematical models of various space vectors were established,and the influence of various space vectors on neutral point voltage was analyzed.The sum of the vector current at the neutral point was zero and the voltage control at the neutral point was completed by.introducing the time offset into different switching times of the redundant small vector.This method was simple in design and avoided the redundant calculation of the traditional VSVPWM method and tedious switch sequence design.This balancing control strategy could greatly reduce the influence of virtual vectors on neutral point voltage and effectively control the low-frequency oscillation of neutral point voltage.The validity of the method was verified by establishing a matlab simulation model.

Comparison of Three SVPWM Strategies

Three space vector pulse width modulation （SVPWM） schemes, called 7-segment space vector modulation （SVM）, 5-segment SVM and 3-segment SVM are studied in this paper. The basic principle of SVPWM is presented. The switching sequence of different scheme is described. The modulation signals, DC bus voltage utilization, and output line voltage harmonic of these schemes are analyzed by the MATLAB software with different modulation index M and frequency modulation index N. The simulation results are analyzed and show that discontinuous modulating functions lead a reduction of switching actions. The DC bus voltage utilization of three schemes is almost the same. For all three SVM, the frequency modulation index N will affect the harmonic characteristic, and the modulation index M will affect DC bus voltage utilization and the harmonic content. The experiment is implemented by the DSP of TMS320F2812. The results validate three algorithms and the simulation.

The use of feld programmable gate array(FPGA)in direct torque control of induction motor

In this paper, the feasibility of embedding the direct torque control （DTC） of an induction machine into field programmable gate arrays （FPGA） is investigated. DTC of an induction machine is simulated in a MATLAB/Simulink environment using a Xilinx system generator. The resulting design has a flexible and modular structure where the designer can customize the hardware blocks by changing the number of inputs, outputs, and algorithm when it is compared to the designs implemented using classical microcontrollers and digital signal processors. With its flexibility, other control algorithms can easily be programmed and embedded into the FPGA. The above system has been implemented on Xilinx Spartan 3A DSP FPGA controller. Simulation and experimentation have been performed to prove the validity of the proposed methodology.