期刊文献+
共找到102篇文章
< 1 2 6 >
每页显示 20 50 100
Aviation-oriented Micromachining Technology—Micro-ECM in Pure Water 被引量:1
1
作者 鲍怀谦 徐家文 李颖 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2008年第5期455-461,共7页
This article proposes a precise and ecofriendly micromachining technology for aerospace application called electrochemical machining in pure water (PW-ECM). On the basis of the principles of water dissociation, a se... This article proposes a precise and ecofriendly micromachining technology for aerospace application called electrochemical machining in pure water (PW-ECM). On the basis of the principles of water dissociation, a series of test setups and tests are devised and performed under different conditions. These tests explain the need for technological conditions realizing PW-ECM, and further explore the technological principles. The results from the tests demonstrate a successful removal of electrolytic slime by means of ultrasonic vibration of the workpiece. To ensure the stability and reliability of PW-ECM process, a new combined machining method of PW-ECM assisted with ultrasonic vibration (PW-ECM/USV) is devised. Trilateral and square cavities and holes as well as a group of English alphabets are worked out on a stainless steel plate. It is confirmed that PW-ECM will be probably an efficient new aviation precision machining method. 展开更多
关键词 electrochemical machining in pure water (PW-ECM) cation exchange membrane water dissociation
下载PDF
Research on Optimized Equipment System with Computer Aid for Water Purification
2
作者 葛常清 吴俊民 《Journal of Southeast University(English Edition)》 EI CAS 2001年第1期66-69,共4页
This paper describes pure water making equipment by using applicable datebase, computer languages and drawing software. It gives a general introduction to the systematic designing plan, the division of the different... This paper describes pure water making equipment by using applicable datebase, computer languages and drawing software. It gives a general introduction to the systematic designing plan, the division of the different parts and their functions, and the pure water making technological process. 展开更多
关键词 technological process flow chart water quality pure water super pure water
下载PDF
Ion Product of Pure Water Characterized by Physics-Based Water Model
3
作者 揭斌斌 蕯支唐 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 2016年第2期167-170,I0001,共5页
Pure water has been characterized for nearly a century, by its dissociation into hydronium (H3O)1+ and hydroxide (HO)1- ions. As a chemical equilibrium reaction, the equilibrium constant, known as the ion product... Pure water has been characterized for nearly a century, by its dissociation into hydronium (H3O)1+ and hydroxide (HO)1- ions. As a chemical equilibrium reaction, the equilibrium constant, known as the ion product or the product of the equilibrium concentration of the two ion species, has been extensively measured by chemists over the liquid water temperature and pressure range. The experimental data have been nonlinear least-squares fitted to chemical thermodynamic-based equilibrium equations, which have been accepted as the industrial standard for 35 years. In this study, a new and statistical-physics-based water ion product equation is presented, in which, the ions are the positively charged protons and the negatively charged proton-holes or prohols. Nonlinear least squares fits of our equation to the experimental data in the 0-100℃ pure liquid water range, give a factor of two better precision than the 35-year industrial standard. 展开更多
关键词 Solid state physics Liquid state chemistry pure water Ion product Positiveproton Negative proton-hole or prohol
下载PDF
g-C_(3)N_(4)/CoTiO_(3) S-scheme heterojunction for enhanced visible light hydrogen production through photocatalytic pure water splitting 被引量:1
4
作者 Aiyun Meng Shuang Zhou +2 位作者 Da Wen Peigang Han Yaorong Su 《Chinese Journal of Catalysis》 SCIE EI CAS CSCD 2022年第10期2548-2557,共10页
Photocatalytic hydrogen(H_(2))production via water splitting in the absence of sacrificial agents is a promising strategy for producing clean and sustainable hydrogen energy from solar energy.However,the realization o... Photocatalytic hydrogen(H_(2))production via water splitting in the absence of sacrificial agents is a promising strategy for producing clean and sustainable hydrogen energy from solar energy.However,the realization of a photocatalytic pure water splitting system with desirable efficiency is still a huge challenge.Herein,visible light photocatalytic H_(2) production from pure water splitting was successfully achieved using a g-C_(3)N_(4)/CoTiO_(3) S-scheme heterojunction photocatalyst in the absence of sacrificial agents.An optimum hydrogen evolution rate of 118μmol∙h^(−1)∙g^(−1) was reached with the addition of 1.5 wt%CoTiO_(3).The remarkably promoted hydrogen evolution rate was attributed to the intensified light absorption coupled with the synergistic effect of visible light responsive CoTiO_(3),the promoted efficiency in charge separation,and the reserved strong redox capacity induced by the S-scheme charge transfer mechanism.This work provides an alternative to visible light-responding oxidation photocatalysts for the construction of S-scheme heterojunctions and high-efficiency photocatalytic systems for pure water splitting. 展开更多
关键词 CoTiO_(3) g-C_(3)N_(4) Photocatalytic hydrogen evolution pure water splitting S-scheme heterojunction
下载PDF
A study of cavitation nucleation in pure water using molecular dynamics simulation
5
作者 Hua Xie Yuequn Xu Cheng Zhong 《Chinese Physics B》 SCIE EI CAS CSCD 2022年第11期395-403,共9页
To discover the microscopic mechanism responsible for cavitation nucleation in pure water,nucleation processes in pure water are simulated using the molecular dynamics method.Cavitation nucleation is generated by unif... To discover the microscopic mechanism responsible for cavitation nucleation in pure water,nucleation processes in pure water are simulated using the molecular dynamics method.Cavitation nucleation is generated by uniformly stretching the system under isothermal conditions,and the formation and development of cavitation nuclei are simulated and discussed at the molecular level.The processes of energy,pressure,and density are analyzed,and the tensile strength of the pure water and the critical volume of the bubble nuclei are investigated.The results show that critical states exist in the process of cavitation nucleation.In the critical state,the energy,density,and pressure of the system change abruptly,and a stable cavitation nucleus is produced if the energy barrier is broken and the critical volume is exceeded.System pressure and water density are the key factors in the generation of cavitation nuclei.When the critical state is surpassed,the liquid is completely ruptured,and the volume of the cavitation nucleus rapidly increases to larger than 100 nm^(3);at this point,the surface tension of the bubble dominates the cavitation nucleus,instead of intermolecular forces.The negative critical pressure for bubble nucleation is-198.6 MPa,the corresponding critical volume is 13.84 nm^(3),and the nucleation rate is 2.42×10^(32)m^(-3)·s^(-1)in pure water at 300 K.Temperature has a significant effect on nucleation:as the temperature rises,nucleation thresholds decrease,and cavitation nucleation occurs earlier. 展开更多
关键词 cavitation nucleation pure water molecular dynamics tensile strength
下载PDF
臭氧协同过氧乙酸消毒在医院集中式纯水供应系统中的应用研究
6
作者 曹雄晶 范允舟 +4 位作者 高芳 吴艳艳 朱明 双梦婕 熊莉娟 《中国感染控制杂志》 CAS CSCD 北大核心 2024年第8期1012-1015,共4页
目的探讨臭氧协同过氧乙酸(PAA)消毒法降低集中式纯水供应系统使用点末端纯水中需氧菌总数的效果。方法开展两阶段对照研究,对某医院集中式纯水供应系统的末端纯水进行微生物限度检查。第一阶段使用PAA消毒法,第二阶段为臭氧强化消毒阶... 目的探讨臭氧协同过氧乙酸(PAA)消毒法降低集中式纯水供应系统使用点末端纯水中需氧菌总数的效果。方法开展两阶段对照研究,对某医院集中式纯水供应系统的末端纯水进行微生物限度检查。第一阶段使用PAA消毒法,第二阶段为臭氧强化消毒阶段,使用PAA协同臭氧的消毒方式。比较不同阶段的消毒效果。结果试验期间共采集211份水标本,PAA消毒组101份,臭氧强化消毒组110份,用水点末端纯水菌落合格率臭氧强化消毒组(85.45%)高于PAA消毒组(74.26%),差异有统计学意义(P=0.04)。臭氧强化消毒组的需氧菌菌落数的中位数(2 CFU/mL)低于PAA消毒组(20 CFU/mL)。随着消毒后时间延长,PAA消毒组的水标本中需氧菌数量呈现明显的上升趋势(第1天VS第92天:9 CFU/mL VS 1062 CFU/mL),臭氧强化消毒组纯水需氧菌数量则波动较小(第1天VS第92天:8 CFU/mL VS 58 CFU/mL)。结论臭氧协同PAA消毒法可降低集中式纯水供应系统的末端出水的需氧菌总数,且维持效果明显。 展开更多
关键词 臭氧 过氧乙酸 医院 集中式纯水供应系统 消毒
下载PDF
Pd single atoms cooperate with S vacancies in ZnIn_(2)S_(4) nanosheets for photocatalytic pure-water splitting 被引量:1
7
作者 Lin Sun Huiping Peng +7 位作者 Fei Xue Shangheng Liu Zhiwei Hu Hongbo Geng Xiaozhi Liu Dong Su Yong Xu Xiaoqing Huang 《Science China Chemistry》 SCIE EI CAS CSCD 2024年第3期855-861,共7页
Photocatalytic water splitting has emerged as a new frontier for converting solar energy to green H_(2) and value-added chemicals.Nevertheless,great challenges still remain for developing efficient photocatalysts for ... Photocatalytic water splitting has emerged as a new frontier for converting solar energy to green H_(2) and value-added chemicals.Nevertheless,great challenges still remain for developing efficient photocatalysts for pure water splitting without sacrificial agents.In this work,we demonstrate that doping hexagonal ZnIn_(2)S_(4)(ZIS) with Pd single atoms(Pd_(0.03)/ZIS) can serve as a highly efficient photocatalyst for pure water splitting to simultaneously produce H_(2) and H_(2)O_(2) without any sacrificial agents.Results from aberration-corrected high-angle annular dark field scanning transmission electron microscopy,X-ray fine spectroscopy,insitu electron paramagnetic resonance and diffuse Fourier transform infrared spectroscopy reveal that doping ZIS with Pd single atoms facilitates the formation of S vacancies(S_(v)),where the photogenerated electrons can transfer to Pd single atoms,as a result of enhanced separation of electron-hole pairs and improved photocatalytic performance.Impressively,Pd_(0.03)/ZIS displays a stoichiometric ratio of H_(2) and H_(2)O_(2) with the productivity of 1,037.9 and 1,021.4μmol g^(-1)h^(-1),respectively,which has largely outperformed pure ZIS and other reported catalysts for pure water splitting.This work provides an efficient photocatalyst for water splitting to produce H_(2) and H_(2)O_(2),which may attract rapid interest in materials science,chemistry,and heterogeneous catalysis. 展开更多
关键词 ZnIn_(2)S_(4) Pd single atom S vacancy pure water splitting H_(2)O_(2)
原文传递
High-Performance H_(2) Photosynthesis from Pure Water over Ru−S Charge Transfer Channels
8
作者 Huiping Peng Mingzi Sun +9 位作者 Fei Xue Xiaozhi Liu Shangheng Liu Tang Yang Lin Sun Hongbo Geng Dong Su Bolong Huang Yong Xu Xiaoqing Huang 《Precision Chemistry》 2024年第9期471-479,共9页
As a versatile energy carrier,H_(2) is considered as one of the most promising sources of clean energy to tackle the current energy crisis and environmental concerns,which can be produced from photocatalytic water spl... As a versatile energy carrier,H_(2) is considered as one of the most promising sources of clean energy to tackle the current energy crisis and environmental concerns,which can be produced from photocatalytic water splitting.However,solar-driven photocatalytic H_(2) production from pure water in the absence of sacrificial reagents remains a great challenge.Herein,we demonstrate that the incorporation of Ru single atoms(SAs)into ZnIn_(2)S_(4)(Ru-ZIS)can enhance the light absorption,reduce the energy barriers for water dissociation,and construct a channel(Ru-S)for separating photogenerated electron−hole pairs,as a result of a significantly enhanced photocatalytic water splitting process.Impressively,the productivity of H_(2) reaches 735.2μmol g^(-1) h^(-1) under visible light irradiation in the absence of sacrificial agents.The apparent quantum efficiency(AQE)for H_(2) evolution reaches 7.5% at 420 nm,with a solarto-hydrogen(STH)efficiency of 0.58%,which is much higher than the value of natural synthetic plants(~0.10%).Moreover,Ru-ZIS exhibits steady productivity of H_(2) even after exposure to ambient conditions for 330 days.This work provides a unique strategy for constructing charge transfer channels to promote the separation of photogenerated electron−hole pairs,which may motivate the fundamental researches on catalyst design for photocatalysis and beyond. 展开更多
关键词 Ru single atom charge channel ZnIn_(2)S_(4) PHOTOCATALYTIC pure water splitting
原文传递
核电领域高阻抗纯水体系IR降控制的研究
9
作者 蔡双雨 雷欣 +2 位作者 张博 文磊 金莹 《实验技术与管理》 CAS 北大核心 2024年第8期104-110,共7页
在采用电化学技术对工程材料进行服役性能表征及寿命评估过程中,IR降是一个难以忽略的影响因素。核电领域高阻抗纯水体系,由于纯水溶液电阻大,IR降的影响更是无法忽略。该实验采用掠入射GIXRD分析某核级304L不锈钢表层钝化膜物相,结合GI... 在采用电化学技术对工程材料进行服役性能表征及寿命评估过程中,IR降是一个难以忽略的影响因素。核电领域高阻抗纯水体系,由于纯水溶液电阻大,IR降的影响更是无法忽略。该实验采用掠入射GIXRD分析某核级304L不锈钢表层钝化膜物相,结合GIXRD物相分析结果,选择合理的等效电路对核级304L不锈钢在纯水溶液中的电化学阻抗谱进行拟合,测得体系的各项电化学参数。该文将高阻抗纯水溶液等效成具有平板电容器响应的纯水涂层,具有创新性。通过分析对比该纯水涂层电容的理论计算值与实际测量值,验证了纯水涂层等效假设的合理性,能够对核电领域高阻抗纯水体系IR降控制研究提供一定借鉴。极化曲线的IR降补偿计算,进一步验证了纯水涂层溶液电阻的存在及其测量的准确性。 展开更多
关键词 高阻抗纯水体系 核级304L不锈钢 极化曲线 电化学阻抗谱 IR降
下载PDF
酚酞基聚醚醚酮/聚乙烯亚胺复合超滤膜的制备与性能研究
10
作者 于云武 吴岩 +2 位作者 谢春阳 韩至立 孙小巍 《沈阳建筑大学学报(自然科学版)》 CAS 北大核心 2024年第5期952-960,共9页
目的 制备纯水通量较高的复合超滤膜,实现染料废水的高效快速分离。方法 采用相分离转化法,以丙酮为非溶剂,酚酞基聚醚醚酮和聚乙烯亚胺为研究对象,在室温条件下,开发出一种性能较好的酚酞基聚醚醚酮/聚乙烯亚胺复合超滤膜;分析酚酞基... 目的 制备纯水通量较高的复合超滤膜,实现染料废水的高效快速分离。方法 采用相分离转化法,以丙酮为非溶剂,酚酞基聚醚醚酮和聚乙烯亚胺为研究对象,在室温条件下,开发出一种性能较好的酚酞基聚醚醚酮/聚乙烯亚胺复合超滤膜;分析酚酞基聚醚醚酮(PEEK-WC)质量分数、聚乙烯亚胺(PEI)添加量、改性反应时间等工艺因素对复合超滤膜性能的影响。结果 随着反应沉积时间的增加,复合超滤膜的水通量呈上升趋势;随着聚乙烯亚胺质量分数增加,复合超滤膜的水通量不断增加;复合超滤膜的最优制备条件为PEI与PEEK-WC的质量比为20%,PEEK-WC与NMP的质量比为15%,反应时间为12 h。结论 酚酞基聚醚醚酮/聚乙烯亚胺复合超滤膜具有良好的截留效果和抗细菌污染性。 展开更多
关键词 超滤膜 高纯水通量 染料截留 盐染体系
下载PDF
整流机组高效冷却技术研究及应用
11
作者 刘荣 李为堂 《云南冶金》 2024年第4期183-187,共5页
铝电解整流机组水风冷却系统夏季运行时,15个3 kW风机全开,冷却水温度依然保持在40℃以上,针对跳闸风险高、耗电量高等问题,将冷却方式由水风冷改为水水冷,定制了8套不锈钢封闭式水冷装置接入到8台整流机组中,改后只需开启一个3 kW喷淋... 铝电解整流机组水风冷却系统夏季运行时,15个3 kW风机全开,冷却水温度依然保持在40℃以上,针对跳闸风险高、耗电量高等问题,将冷却方式由水风冷改为水水冷,定制了8套不锈钢封闭式水冷装置接入到8台整流机组中,改后只需开启一个3 kW喷淋泵和一个1.1 kW风机,冷却水温度就可保持在35℃以下,耗电量降幅达90%,可节约用电成本99万元/a。 展开更多
关键词 铝电解整流 纯水冷却系统 闭式冷却塔 风机冷却器
下载PDF
空压机冷却系统节能改造
12
作者 丁磊 王敏 刘荣 《冶金信息导刊》 2024年第3期43-46,30,共5页
针对空压机冷却系统存在水泵、风机功率大,用电、水单耗高和冷却器易结垢堵塞,运行风险、成本高问题,采用将原来水(自来水)—风露天集中式冷却塔(一用一备),改造升级为一台空压机配置一台小型水(纯水)—水(自来水)闭式冷却塔的措施,达... 针对空压机冷却系统存在水泵、风机功率大,用电、水单耗高和冷却器易结垢堵塞,运行风险、成本高问题,采用将原来水(自来水)—风露天集中式冷却塔(一用一备),改造升级为一台空压机配置一台小型水(纯水)—水(自来水)闭式冷却塔的措施,达到空压机正常运行时一级、二级排气温度小于35°C,用电量节约40000 kWh/月,用水量节约3000m^(3)/月的效果,每年可节约用电、用水和冷却器更换成本共计约73.2万元。 展开更多
关键词 空压机 纯水冷却系统 闭式冷却塔 冷却器
下载PDF
2(1/2)D(FD)~2TD Method and Its Application to an Antenna in Water
13
《Journal of Modern Transportation》 1997年第2期37-43,共7页
A novel 212DFDTD method aiming to deal with dispersive media is developed. It is named as 212D(FD)2TD method. The main idea of it is to represent the constitutive equation by a convolution in time domain. Consequently... A novel 212DFDTD method aiming to deal with dispersive media is developed. It is named as 212D(FD)2TD method. The main idea of it is to represent the constitutive equation by a convolution in time domain. Consequently, this newly developed method is used to analyze some of the characteristics of an ideal line antenna in pure water. A good agreement with the former experimented results is obtained. 展开更多
关键词 212D(FD)2TD dispersive media antenna in pure water optimal position matching layer
下载PDF
1580mm热轧带钢35kVTCR型静止型动态无功补偿装置(SVC)介绍
14
作者 安宏亮 《变频器世界》 2023年第12期97-100,共4页
1580mm热轧带钢35kV电源供电系统主要负荷为9台6000kW交-交变频主传动轧机、2台1200kW直流传动立辊轧机、1台1500kW直流传动转鼓式飞剪,为了控制轧机注入系统的谐波电流量,抑制电压波动,提高功率因数,保证轧钢过程稳定、节能、提高轧机... 1580mm热轧带钢35kV电源供电系统主要负荷为9台6000kW交-交变频主传动轧机、2台1200kW直流传动立辊轧机、1台1500kW直流传动转鼓式飞剪,为了控制轧机注入系统的谐波电流量,抑制电压波动,提高功率因数,保证轧钢过程稳定、节能、提高轧机效率,并保证轧机供电设备本身及其他用电设备的安全运行,在供电母线安装一套SVC无功补偿装置,进行电能质量治理。 展开更多
关键词 TCR(晶闸管控制的相控电抗器) FC(无源滤波器) 纯水冷却系统 微机保护装置
下载PDF
综采工作面纯水介质液压系统发展简述及展望 被引量:2
15
作者 刘少飞 袁显湖 《中国煤炭》 2023年第S02期341-347,共7页
介绍了纯水介质液压支架系统项目实施的背景及重大意义,并基于纯水与乳化液的理化特性对比分析了纯水介质液压支架系统项目实施的技术难点。阐述了用“纯水替代传统乳化液”的具体方案,并从增强纯水电阻率、材料选择及防腐处理方面提出... 介绍了纯水介质液压支架系统项目实施的背景及重大意义,并基于纯水与乳化液的理化特性对比分析了纯水介质液压支架系统项目实施的技术难点。阐述了用“纯水替代传统乳化液”的具体方案,并从增强纯水电阻率、材料选择及防腐处理方面提出了对应的优化措施。通过在国能神东煤炭集团有限责任公司锦界煤矿建立纯水支架履历表,总结分析了记录期间纯水支架各油缸及反冲洗装置的更换情况,并在此基础上估算出了各油缸及反冲洗装置的正常使用周期。最后指出,采取在综采工作面巷道位置处加设一套EDI系统、进一步缩短管路的敷设距离、继续研发密封性更佳的管路材料和在工作面机头、中部及机尾支架处分别设置多个水质监测点、对水质进行实时监测等措施是未来完善纯水介质项目液压支架系统项目的发展趋势。 展开更多
关键词 纯水介质 液压系统 乳化液 电阻率 优化措施
下载PDF
Revising the H_(2)^(16)O line-shape parameters around 1.1μm based on the speed-dependent Nelkin–Ghatak profile and the Hartmann–Tran profile
16
作者 张惠 郑健捷 +6 位作者 刘强 朱文越 钱仙妹 江贵生 查申龙 张启磊 马宏亮 《Chinese Physics B》 SCIE EI CAS CSCD 2023年第12期305-311,共7页
Accurate spectroscopic data for H_(2)^(16)O in the 1.1μm region are particularly important for the study of Earth's atmosphere.The pure water vapor molecular spectra were measured based on direct laser absorption... Accurate spectroscopic data for H_(2)^(16)O in the 1.1μm region are particularly important for the study of Earth's atmosphere.The pure water vapor molecular spectra were measured based on direct laser absorption spectroscopy using a narrow line-width external cavity diode laser combined with a high-precision Fabry-Pérot etalon.A total of 31 H_(2)^(16)O transitions were studied for the first time by using the speed-dependent Nelkin-Ghatak profile and the Hartmann-Tran profile.From an accurate line-shape analysis,we obtained the line intensities and the self-broadening coefficients,and they are compared with the available data reported in the HITRAN 2016 database and the HITRAN 2020 database.Finally,we obtained information on the influence of Dicke narrowing,as well as the correlations between Dicke narrowing and speed dependence,and of speed-dependent effects. 展开更多
关键词 pure water vapor molecule the speed-dependent Nelkin–Ghatak profile the Hartmann–Tran profile line intensities
下载PDF
利用市政再生水制备超纯水的实验验证
17
作者 王永盛 王萌 《科学技术创新》 2023年第14期64-67,共4页
目前国内制备超纯水多采用“混凝+UF+RO+EDI”等处理工艺,原水一般是地表水或地下水,但是利用市政污水厂的再生水制备超纯水的研究和应用实属罕见。针对该地区再生水水质,建立了一套“臭氧均相氧化+RO+EDI”实验装置,其RO产水电导率<... 目前国内制备超纯水多采用“混凝+UF+RO+EDI”等处理工艺,原水一般是地表水或地下水,但是利用市政污水厂的再生水制备超纯水的研究和应用实属罕见。针对该地区再生水水质,建立了一套“臭氧均相氧化+RO+EDI”实验装置,其RO产水电导率<2.77μs/cm、EDI产水电阻率>18 MΩ·m,RO浓水和EDI极水可全部作为循环水场的补水。实验过程中有发现企业现有设备设施存在的缺陷,实验结果可用于指导将来工业化详细设计。 展开更多
关键词 再生水 超纯水 RO EDI 全膜法
下载PDF
某钢铁企业纯水系统改造实例
18
作者 郑一鸣 《广州化工》 CAS 2023年第20期111-114,共4页
某钢铁企业针对1#纯水站纯水制备系统存在的排放废液量大、污染物波动大、工艺落后、运行成本高、设施老化和故障率高等问题,进行大规模改造。改造工程选用“超滤+两级反渗透+混床”工艺。运用水质大数据,通过电导率来表征混床除硅性能... 某钢铁企业针对1#纯水站纯水制备系统存在的排放废液量大、污染物波动大、工艺落后、运行成本高、设施老化和故障率高等问题,进行大规模改造。改造工程选用“超滤+两级反渗透+混床”工艺。运用水质大数据,通过电导率来表征混床除硅性能,降低再生废液排放量。文章详细介绍了其工艺设计、设备配置及系统运行,运行结果表明,出水达到要求、生产运行稳定、并减少了药耗和降低了劳动强度。 展开更多
关键词 钢铁企业 纯水系统改造 超滤 反渗透 混床
下载PDF
浅析某微电子产业园制造厂房超纯水处理系统案例
19
作者 张泽超 《上海节能》 2023年第2期217-221,共5页
随着科技的进步,半导体芯片制造业得以快速发展,但由于其制造工艺的精密性和复杂性,对工艺中所用水质要求极高。以青岛微电子产业园制造厂房为例,介绍了一种超纯水制造工艺,并对现状提出了维护措施和成本分析。经实际运行测试,该系统制... 随着科技的进步,半导体芯片制造业得以快速发展,但由于其制造工艺的精密性和复杂性,对工艺中所用水质要求极高。以青岛微电子产业园制造厂房为例,介绍了一种超纯水制造工艺,并对现状提出了维护措施和成本分析。经实际运行测试,该系统制备的超纯水稳定优质,节水节能效率高,保障了工艺生产所需,为同类型工业厂房纯水系统提供了参考。 展开更多
关键词 纯水系统 RO反渗透 UF超滤 EDI除盐 系统调试
下载PDF
浅谈医院集中纯水供水系统管网消毒管理
20
作者 顾俊 张云云 《科学与信息化》 2023年第18期190-192,共3页
本文以医院集中纯水供水系统管网消毒为例,以水质满足国家规范要求为基础,以PDCA方法为指导,制定管网消毒前期准备工作和实施方案。在管网消毒过程中不断查找存在的问题并进行整改。通过水质取样及反馈分析实施闭环管理,实现规范高效的... 本文以医院集中纯水供水系统管网消毒为例,以水质满足国家规范要求为基础,以PDCA方法为指导,制定管网消毒前期准备工作和实施方案。在管网消毒过程中不断查找存在的问题并进行整改。通过水质取样及反馈分析实施闭环管理,实现规范高效的管网消毒流程,有效预防和控制因流程不规范、水质不合格而造成医院院感问题。 展开更多
关键词 集中供水系统 管网消毒 水质 医院纯水
下载PDF
上一页 1 2 6 下一页 到第
使用帮助 返回顶部