Nowadays, by the increasing attention to environment and high rate of fuel production, recycling of purge gas as reactant to a reactor is highly considered. In this study, it is proposed that the purge gases of methan...Nowadays, by the increasing attention to environment and high rate of fuel production, recycling of purge gas as reactant to a reactor is highly considered. In this study, it is proposed that the purge gases of methanol production unit, which are approximately15.018 t·h^(-1) in the largest methanol production complexes in the world, can be recycled to the reactor and utilized for increasing the production rate. Purge gas streams contain 63% hydrogen,20% carbon monoxide and carbon dioxide as reactants and 17% nitrogen and methane as inert. The recycling effect of beneficial components on methanol production rate has been investigated in this study. Simulation results show that methanol production enhances by recycling just hydrogen, carbon dioxide and carbon monoxide which is an effective configuration among the others. It is named as Desired Recycle Configuration(DRC) in this study. The optimum fraction of returning purge gas is calculated via one dimensional modeling of process and Response Surface Methodology(RSM) is applied to maximize the methanol flow rate and minimize the carbon dioxide flow rate. Simulation results illustrate that methanol flow rate increases by 0.106% in DRC compared to Conventional Recycle Configuration(CRC) which therefore shows the superiority of applying DRC to CRC.展开更多
A refined theoretical analysis for using the spiral airflow and axial airflow to purge residual water in an inclined pipe was presented. The computations reveal that, in most cases, the spiral flow can purge the resid...A refined theoretical analysis for using the spiral airflow and axial airflow to purge residual water in an inclined pipe was presented. The computations reveal that, in most cases, the spiral flow can purge the residual water in the inclined pipe indeed while the axial flow may induce back flow of the water, just as predicted in the experiments presented by Horii and Zhao et al. In addition, the effects of various initial conditions on water purging were studied in detail for both the spiral and axial flow cases.展开更多
During autologous bone marrow graft in treatment of malignant diseases, it is critical to purge malignant cells from the marrow. In the present study, the sensitivity to photodynamic inactivation of 3 leukemic cell li...During autologous bone marrow graft in treatment of malignant diseases, it is critical to purge malignant cells from the marrow. In the present study, the sensitivity to photodynamic inactivation of 3 leukemic cell lines was compared with their counterpart normal hematopoietic cells. After mouse leukemic L1210 cells were treated with a preparation of hematoporphyrin derivatives, YHpD, 10 μg/ml for 1 hr. and irradiated with blacklight (peak wavelength 395 nm, light intensity 0.6 mW/cm2) for 5 minutes, the survival rate of clonogenic cells decreased to <10%, while that of bone marrow granulocyte macrophage progenitor cells (CFU-GM) in DBA/2 mice remained at nearly normal level (>80%). Similar results were obtained when human leukemic HL-60 cells were compared with human CFU-GM and mouse leukemic L615 cells with CFU-GM in 615 strain mice. It is suggested that hematoporphyrin photoradiation may be useful for Iselectively killing leukemic cells in bone marrow.展开更多
It is convenient and time saving to analyze pentachlorophenol (PCP) in water by purge and trap concentrator coupled to gas chromatography that avoids employing a great deal of organic solvent. In this paper, the appro...It is convenient and time saving to analyze pentachlorophenol (PCP) in water by purge and trap concentrator coupled to gas chromatography that avoids employing a great deal of organic solvent. In this paper, the appropriate purge and trap conditions of PCP are determined: the trapped sorbent is TenaxGC; the purge gas is pure nitrogen and purge flow is 40ml/min; the purge time is 30min. A series of standard PCP water samples 5, 10, 50, 100, 200, 400, 800, 1000ppb are analyzed in order to obtain standard curve, and the linear regressive equation obtained is Y=109.65X-687.72, which correlation coefficient r is 0.9949. The precision of the method is determined with 0.5ppb PCP water sample, and the standard deviation measured is 3%. The detection limit for PCP is 0.2ppb.展开更多
Purging plug refractories in China typically contain around 3 mass% of super-fine chromium oxide in the matrix in order to improve the performance of the purging plugs, primarily, slag corrosion and wear resistance. A...Purging plug refractories in China typically contain around 3 mass% of super-fine chromium oxide in the matrix in order to improve the performance of the purging plugs, primarily, slag corrosion and wear resistance. Alternatives to chromium oxide containing refractories have gained interest due to health concerns related to the formation of soluble chromium compounds over long storage periods of refractory wastes. Super-ground reactive alumina can replace chromium oxide in purging plug refractories and this paper discussed the new reactive alumina E-SY 88 in comparison to chromium oxide in a typical purging plug castable. The mixing behaviour, wet castable properties, as well as cured, dried, and fired properties at different temperatures up to 1 600 ℃ were compared. In addition, the hot modulus of rupture, creep behaviour, thermal shock resistance and slag corrosion resistance were tested. The microstructure after slag corrosion was investigated by SEM. The results prove that E-SY 88 is an economically viable technical alternative to chromium oxide in purging plug refractories.展开更多
At subzero temperature, the startup capability and performance of polymer electrolyte membrane fuel cell (PEMFC) deteriorates markedly. The object of this work is to study the degradation mechanism of key components o...At subzero temperature, the startup capability and performance of polymer electrolyte membrane fuel cell (PEMFC) deteriorates markedly. The object of this work is to study the degradation mechanism of key components of PEMFC-membrane-electrode assembly (MEA) and seek feasible measures to avoid degradation. The effect of freeze/thaw cycles on the structure of MEA is investigated based on porosity and SEM measurement. The performance of a single cell was also tested before and after repetitious freeze/thaw cycles. The experimental results indicated that the performance of a PEMFC decreased along with the total operating time as well as the pore size distribution shifting and micro configuration changing. However, when the redundant water had been removed by gas purging, the performance of the PEMFC stack was almost resumed when it experienced again the same subzero temperature test. These results show that it is necessary to remove the water in PEMFCs to maintain stable performance under subzero temperature and gas purging is proved to be the effective operation.展开更多
Three different castables were prepared as steel-ladle purging-plug refractory materials： corundum-based low-cement castable （C-LCC）, corundum-spinel-based low-cement castable （C-S-LCC）, and no-cement corundum-sp...Three different castables were prepared as steel-ladle purging-plug refractory materials： corundum-based low-cement castable （C-LCC）, corundum-spinel-based low-cement castable （C-S-LCC）, and no-cement corundum-spinel castable （C-S-NCC） （hydratable alu- mina p-A1203 bonded）. The properties of these castables were characterized with regard to water demand/flow ability, cold crushing strength （CCS）, cold modulus of rupture （CMoR）, permanent linear change （PLC）, apparent porosity, and hot modulus of rupture （HMoR）. The re- sults show the CCS/CMoR and HMoR of C-LCC and C-S-LCC are greater than those of the castable C-S-NCC. According to the micro- structure analysis, the sintering effect and the bonding type of the matrix material differ among the three castables. The calcium hexaluminate （CA6） phase in the matrix of C-LCC enhances the cold and hot mechanical strengths. In the case of C-S-LCC, the CA6 and 2CaO·2MgO·14A12O3（C2MEA14） ternary phases generated from the matrix can greatly increase the cold and hot mechanical strengths. In the case of the no-cement castable, sintering becomes difficult, resulting in a lower mechanical strength.展开更多
The capability of recombinant human interleukin-2 ( rhIL-2) and lymphokine-activated killer (LAK) cells in the purging of normal human bone marrows contaminated with human myeloid leukemic cell lines was evaluated. Mi...The capability of recombinant human interleukin-2 ( rhIL-2) and lymphokine-activated killer (LAK) cells in the purging of normal human bone marrows contaminated with human myeloid leukemic cell lines was evaluated. Mixtures of normal human bone marrow mononuclear cells ( BMC) and K562 cells or HL-60 cells (at the BMCK562 ratio of 200:1, 100:1 or 20:1) were incubated with IL-2 with or without LAK cells at the BMC:LAK ratio of 1:1 for one or three days. The nubmers of residual K562 cells, BFU-E and CFU-GM were examined by clonogenic assays. In 200:1 mixture groups without LAK cells, the number of K562 colonies reduced by 50% with no loss of BFU-E and CFU-GM in one-day cultures, and no K562 colonies formed in three-day cultures with about 20% loss of BFU-E and CFU-GM. If the BMC.K562 ratios were 100:1 or 20:1 in the mktures, the leukemic cells could not be eliminated. When the mixtures were incubated with IL-2 and LAK cells, no leukemic cell colonies were detected in the 20:1 group following one-day展开更多
Saline intrusion into marine sewage ouffalls will greatly decrease the efficiency of sewage disposal. In order to investigate the mechanisms of this flow, in this paper, a three-dimensional numerical model based on F...Saline intrusion into marine sewage ouffalls will greatly decrease the efficiency of sewage disposal. In order to investigate the mechanisms of this flow, in this paper, a three-dimensional numerical model based on FVM （Finite Volume Method） is established, The RNG κ-ε model is selected for turbulence modeling. The time-averaged vohtme fraction equations are introduced to simulate the stratification and inteffaeial exchange of sewage and seawater in outfalls. Validity of the established three-dimensional numerical model is evaluated by comparisons of numerical results with experimental data. With this three-dimensional numerical model, the internal flow characteristics in ouffalls for different sewage discharges are simulated. The results indicate that for a low sewage discharge, saline circulates in the outfall due to intrusion and both the inflowing momentum and the inteffaeial turbulent mixing are important mechanisms to extrude the saline. For a high sewage discharge, saline intrusion could be avoided. The inflow momentum is the main mechanism to extrude the saline and the inteffacial turbulent mixing is nut important relatively. Even at a high sewage discharge, the saline wedge would be retained in the main ouffall pipe after the risers are purged. It takes a long time for this saline wedge to be extruded by interracial turbulent mixing.展开更多
Damage reasons of purging plugs for refining ladle and research progress on thermal shock resistance of corundum- spinel purging plugs were summarized. Research achievements and application results of nonoxides bonded...Damage reasons of purging plugs for refining ladle and research progress on thermal shock resistance of corundum- spinel purging plugs were summarized. Research achievements and application results of nonoxides bonded corundum purging plugs for refining ladle were briefly reviewed. The further research and developing trend of purging plugs was proposed.展开更多
文摘Nowadays, by the increasing attention to environment and high rate of fuel production, recycling of purge gas as reactant to a reactor is highly considered. In this study, it is proposed that the purge gases of methanol production unit, which are approximately15.018 t·h^(-1) in the largest methanol production complexes in the world, can be recycled to the reactor and utilized for increasing the production rate. Purge gas streams contain 63% hydrogen,20% carbon monoxide and carbon dioxide as reactants and 17% nitrogen and methane as inert. The recycling effect of beneficial components on methanol production rate has been investigated in this study. Simulation results show that methanol production enhances by recycling just hydrogen, carbon dioxide and carbon monoxide which is an effective configuration among the others. It is named as Desired Recycle Configuration(DRC) in this study. The optimum fraction of returning purge gas is calculated via one dimensional modeling of process and Response Surface Methodology(RSM) is applied to maximize the methanol flow rate and minimize the carbon dioxide flow rate. Simulation results illustrate that methanol flow rate increases by 0.106% in DRC compared to Conventional Recycle Configuration(CRC) which therefore shows the superiority of applying DRC to CRC.
文摘A refined theoretical analysis for using the spiral airflow and axial airflow to purge residual water in an inclined pipe was presented. The computations reveal that, in most cases, the spiral flow can purge the residual water in the inclined pipe indeed while the axial flow may induce back flow of the water, just as predicted in the experiments presented by Horii and Zhao et al. In addition, the effects of various initial conditions on water purging were studied in detail for both the spiral and axial flow cases.
文摘During autologous bone marrow graft in treatment of malignant diseases, it is critical to purge malignant cells from the marrow. In the present study, the sensitivity to photodynamic inactivation of 3 leukemic cell lines was compared with their counterpart normal hematopoietic cells. After mouse leukemic L1210 cells were treated with a preparation of hematoporphyrin derivatives, YHpD, 10 μg/ml for 1 hr. and irradiated with blacklight (peak wavelength 395 nm, light intensity 0.6 mW/cm2) for 5 minutes, the survival rate of clonogenic cells decreased to <10%, while that of bone marrow granulocyte macrophage progenitor cells (CFU-GM) in DBA/2 mice remained at nearly normal level (>80%). Similar results were obtained when human leukemic HL-60 cells were compared with human CFU-GM and mouse leukemic L615 cells with CFU-GM in 615 strain mice. It is suggested that hematoporphyrin photoradiation may be useful for Iselectively killing leukemic cells in bone marrow.
文摘It is convenient and time saving to analyze pentachlorophenol (PCP) in water by purge and trap concentrator coupled to gas chromatography that avoids employing a great deal of organic solvent. In this paper, the appropriate purge and trap conditions of PCP are determined: the trapped sorbent is TenaxGC; the purge gas is pure nitrogen and purge flow is 40ml/min; the purge time is 30min. A series of standard PCP water samples 5, 10, 50, 100, 200, 400, 800, 1000ppb are analyzed in order to obtain standard curve, and the linear regressive equation obtained is Y=109.65X-687.72, which correlation coefficient r is 0.9949. The precision of the method is determined with 0.5ppb PCP water sample, and the standard deviation measured is 3%. The detection limit for PCP is 0.2ppb.
文摘Purging plug refractories in China typically contain around 3 mass% of super-fine chromium oxide in the matrix in order to improve the performance of the purging plugs, primarily, slag corrosion and wear resistance. Alternatives to chromium oxide containing refractories have gained interest due to health concerns related to the formation of soluble chromium compounds over long storage periods of refractory wastes. Super-ground reactive alumina can replace chromium oxide in purging plug refractories and this paper discussed the new reactive alumina E-SY 88 in comparison to chromium oxide in a typical purging plug castable. The mixing behaviour, wet castable properties, as well as cured, dried, and fired properties at different temperatures up to 1 600 ℃ were compared. In addition, the hot modulus of rupture, creep behaviour, thermal shock resistance and slag corrosion resistance were tested. The microstructure after slag corrosion was investigated by SEM. The results prove that E-SY 88 is an economically viable technical alternative to chromium oxide in purging plug refractories.
基金Supported by the National Natural Science Foundation of China (No.20206030) and Ministry of Science and Technology 863 Hi-Technology Research and Development Program of China (2005AA501660).
文摘At subzero temperature, the startup capability and performance of polymer electrolyte membrane fuel cell (PEMFC) deteriorates markedly. The object of this work is to study the degradation mechanism of key components of PEMFC-membrane-electrode assembly (MEA) and seek feasible measures to avoid degradation. The effect of freeze/thaw cycles on the structure of MEA is investigated based on porosity and SEM measurement. The performance of a single cell was also tested before and after repetitious freeze/thaw cycles. The experimental results indicated that the performance of a PEMFC decreased along with the total operating time as well as the pore size distribution shifting and micro configuration changing. However, when the redundant water had been removed by gas purging, the performance of the PEMFC stack was almost resumed when it experienced again the same subzero temperature test. These results show that it is necessary to remove the water in PEMFCs to maintain stable performance under subzero temperature and gas purging is proved to be the effective operation.
文摘Three different castables were prepared as steel-ladle purging-plug refractory materials： corundum-based low-cement castable （C-LCC）, corundum-spinel-based low-cement castable （C-S-LCC）, and no-cement corundum-spinel castable （C-S-NCC） （hydratable alu- mina p-A1203 bonded）. The properties of these castables were characterized with regard to water demand/flow ability, cold crushing strength （CCS）, cold modulus of rupture （CMoR）, permanent linear change （PLC）, apparent porosity, and hot modulus of rupture （HMoR）. The re- sults show the CCS/CMoR and HMoR of C-LCC and C-S-LCC are greater than those of the castable C-S-NCC. According to the micro- structure analysis, the sintering effect and the bonding type of the matrix material differ among the three castables. The calcium hexaluminate （CA6） phase in the matrix of C-LCC enhances the cold and hot mechanical strengths. In the case of C-S-LCC, the CA6 and 2CaO·2MgO·14A12O3（C2MEA14） ternary phases generated from the matrix can greatly increase the cold and hot mechanical strengths. In the case of the no-cement castable, sintering becomes difficult, resulting in a lower mechanical strength.
文摘The capability of recombinant human interleukin-2 ( rhIL-2) and lymphokine-activated killer (LAK) cells in the purging of normal human bone marrows contaminated with human myeloid leukemic cell lines was evaluated. Mixtures of normal human bone marrow mononuclear cells ( BMC) and K562 cells or HL-60 cells (at the BMCK562 ratio of 200:1, 100:1 or 20:1) were incubated with IL-2 with or without LAK cells at the BMC:LAK ratio of 1:1 for one or three days. The nubmers of residual K562 cells, BFU-E and CFU-GM were examined by clonogenic assays. In 200:1 mixture groups without LAK cells, the number of K562 colonies reduced by 50% with no loss of BFU-E and CFU-GM in one-day cultures, and no K562 colonies formed in three-day cultures with about 20% loss of BFU-E and CFU-GM. If the BMC.K562 ratios were 100:1 or 20:1 in the mktures, the leukemic cells could not be eliminated. When the mixtures were incubated with IL-2 and LAK cells, no leukemic cell colonies were detected in the 20:1 group following one-day
文摘Saline intrusion into marine sewage ouffalls will greatly decrease the efficiency of sewage disposal. In order to investigate the mechanisms of this flow, in this paper, a three-dimensional numerical model based on FVM （Finite Volume Method） is established, The RNG κ-ε model is selected for turbulence modeling. The time-averaged vohtme fraction equations are introduced to simulate the stratification and inteffaeial exchange of sewage and seawater in outfalls. Validity of the established three-dimensional numerical model is evaluated by comparisons of numerical results with experimental data. With this three-dimensional numerical model, the internal flow characteristics in ouffalls for different sewage discharges are simulated. The results indicate that for a low sewage discharge, saline circulates in the outfall due to intrusion and both the inflowing momentum and the inteffaeial turbulent mixing are important mechanisms to extrude the saline. For a high sewage discharge, saline intrusion could be avoided. The inflow momentum is the main mechanism to extrude the saline and the inteffacial turbulent mixing is nut important relatively. Even at a high sewage discharge, the saline wedge would be retained in the main ouffall pipe after the risers are purged. It takes a long time for this saline wedge to be extruded by interracial turbulent mixing.
基金National Science Foundation of China ( No.51032007 and No.U1204505) for supporting this work
文摘Damage reasons of purging plugs for refining ladle and research progress on thermal shock resistance of corundum- spinel purging plugs were summarized. Research achievements and application results of nonoxides bonded corundum purging plugs for refining ladle were briefly reviewed. The further research and developing trend of purging plugs was proposed.
