Study on Purification and Properties of Antibacterial Substance from Antagonistic Bacteria P72 against Wheat Scab

[Objective] The study aimed to explore the antibacterial activity and stability of antagonistic bacteria P72 against wheat scab.[Method] The Bacillus subtilis P72 was inoculated into fermentation media with the inoculation amount 5%,then cultured on shaking table at 28 ℃ for 48 h and centrifuged at 8 000 r/min for 10 min.The supernatant of fermentation broth was purified and then the genetic stability,thermal stability and pH stability were detected.[Result] By DEAE-52 ion exchange chromatography,the protein eluted by 0.5 mol/L NaCl solution possessed the strongest antagonistic ability against wheat scab pathogen.The SDS-PAGE electrophoresis showed that the molecular weight of the purified protein with antibacterial effect was 40 kD.By stability test,the antibacterial substance produced by P72 strain showed heritable antagonistic activity,high stability below 60 ℃,stability to acid and unstability to alkali.[Conclusion] The antagonistic bacteria P72 had strong antagonistic ability to wheat scab pathogen,stable antibacterial activity and thermal stability,so it would possess a wide development prospect.

Deep eutectic solvents for separation and purification applications in critical metal metallurgy:Recent advances and perspectives

Solvent extraction,a separation and purification technology,is crucial in critical metal metallurgy.Organic solvents commonly used in solvent extraction exhibit disadvantages,such as high volatility,high toxicity,and flammability,causing a spectrum of hazards to human health and environmental safety.Neoteric solvents have been recognized as potential alternatives to these harmful organic solvents.In the past two decades,several neoteric solvents have been proposed,including ionic liquids(ILs)and deep eutectic solvents(DESs).DESs have gradually become the focus of green solvents owing to several advantages,namely,low toxicity,degradability,and low cost.In this critical review,their classification,formation mechanisms,preparation methods,characterization technologies,and special physicochemical properties based on the most recent advancements in research have been systematically described.Subsequently,the major separation and purification applications of DESs in critical metal metallurgy were comprehensively summarized.Finally,future opportunities and challenges of DESs were explored in the current research area.In conclusion,this review provides valuable insights for improving our overall understanding of DESs,and it holds important potential for expanding separation and purification applications in critical metal metallurgy.

Researches on Extraction,Purification Technique and Properties of Lectin from Porphyra yezoensis

[Objective] The aim was to explore the extraction technique and purification method of lectin from Porpya yezoensis,as well as to investigate the properties of lectin. [Method] The effects of four factors such as buffer system,solid-liquid ratio,temperature,and extracting time on the lectin extraction result from P. yezoensis were investigated by the use of specific activity as the indicator. Then the lectin was purified by DEAE-Sepharose FF chromatography. The hemagglutination activity was used as the indicator,and the properties of the lectin such as carbohydrate specificity,divalent cations dependence,temperature,acidic and alkaline stability and others were detected. [Result] The optimal extraction conditions were：extraction ageat Tris-HCl buffer （25 mmol/L,pH=7.5 ）,solid-liquid ratio of 1：5,extracting temperature of 40 ℃,and extracting time of 16 h. The activity of the lectin of P. yezoensis didn＇t change after 30 min of being heated at 50 ℃,which showed a certain extent of thermal stability,and the suitable pH value was 7-9. The lectin of P. yezoensis could combine with maltose,D-galactose,D-xylose and L-Arabinose,in which the binding force with the maltose was the strongest. The lectin activity was depended on the addition of Ca2＋ and Mg2＋. [Conclusion] The research had provided theoretical basis for the clarification of immune mechanism of P. yezoensis,as well as its high effective utilization.

Molecular simulation study of the microstructures and properties of pyridinium ionic liquid[HPy][BF_(4)]mixed with acetonitrile

The microstructures and thermodynamic properties of mixed systems comprising pyridinium ionic liquid[HPy][BF_(4)]and acetonitrile at different mole fractions were studied using molecular dynamics simulation in this work.The following properties were determined:density,self-diffusion coefficient,excess molar volume,and radial distribution function.The results show that with an increase in the mole fraction of[HPy][BF_(4)],the self-diffusion coefficient decreases.Additionally,the excess molar volume initially decreases,reaches a minimum,and then increases.The rules of radial distribution functions(RDFs)of characteristic atoms are different.With increasing the mole fraction of[HPy][BF_(4)],the first peak of the RDFs of HA1-F decreases,while that of CT6-CT6 rises at first and then decreases.This indicates that the solvent molecules affect the polar and non-polar regions of[HPy][BF_(4)]differently.

Purification and Properties of Superoxide Dismutase(SOD) in Allium Sativum

Superoxide dismutases(SODs) were purified to homogeneity from Allium Sativum by means of ammonium sulfate precipitation and column chromatography with DEAE-cellulose(DE52) and Sephadex G-75. Based on sodium dodecyl sulfate\|polyacrylamide gel electrophoresis(SDS-AGE), Allium Sativum is predicted to contain four SODs. The molecular weights of the native SODs are 41 3 kD, 37 0 kD, 35 2 kD and 31 0 kD, which consist of subunits of 20 7 kD, 18 4 kD, 17 7 kD and 15 4 kD respectively. Because of their specific sensitivity to hydrogen peroxide, cyanogens potassium and chloroform\|alcohol, the SODs in Allium Sativum appear to be Cu, Zn-SOD isoenzymes. The isoelectric analysis indicates that three of the four isoenzymes are acidic proteins with isoelectric points at pH 3 5, 3 7 and 4 0, respectively, and the fourth one is a basic protein with isoeletric point at pH 8 5.

Effect of purification treatment on properties of Mg-Gd-Y-Zr alloy

Mg-Gd-Y-Zr alloy was purified by the method of filtering purification. The type, morphology, size distribution and volume fraction of inclusions in the alloy were analyzed using optical microscope and scanning electron microscope, and the effects of the inclusions on the mechanical and corrosion properties of the alloy were investigated. The results indicate that the filtering purification method is effective to remove inclusions in the alloy. By the filtering purification method, the average size of inclusions in the alloy reduces from 12.7 μm to 4.3 μm and the average volume fraction of inclusions in the alloy reduces from 0.26% to 0.06%. The ultimate tensile strength, yield strength and elongation of the alloy are improved from 200 MPa, 156 MPa and 3.4% to 232 MPa, 167 MPa and 7.0%, respectively. The corrosion rate of the alloy decreases dramatically from 38.8g/（mLd） to 2.5 g/（mZ.d） in the salt spray test.

Purification and enzymatic properties of arsenic resistance protein ArsH from heterogeneous expression in E.coli BL21

Four arsenic-resistance genes(arsB,arsC,arsH,arsR) have been discovered in Acidithiobacillus ferrooxidans.Their gene sequences have been identified and three different arsenic-resistance mechanisms have been elucidated.However,the function of the arsH gene in At.ferrooxidans remains unclear.In order to evaluate the function of the arsH gene,we cloned it and expressed it in Escherichia coli.The protein was purified and its relative molecular mass was determined by SDS-PAGE(Sodium dodecyl sulfate-polyacrylamide gel electrophoresis).The results indicated that the relative molecular mass of the purified ArsH was approximately 29 kDa.The purified protein ArsH from E.coli BL21 was a flavoprotein that oxidized in vitro NADPH with an optimal pH of 6.4.

Purification of Two Antimicrobial Substances Produced by Bacillus subtilis Strain B11 and Their Properties

Two antimicrobial substances produced by Bacillus subtilis strain B 11 were purified by boiling, DEAE 52 anion exchange chromatography and aluminum oxide adsorption chromatography, These purified substances showed only one spot on silica gel thin layer chromatography （TLC）. Antimicrobial assays showed that antimicrobial substances A and B inhibited the growth of plant pathogens such as Fusarium oxysporum Schl f.sp. niveum, Rhizoctonia solani, Ralstonia solanacearum and Xanthomonas oryzae pv. oryzae. In addition, antimicrobial substance B could also inhibit the growth of Magnaporthe grisea. These two antimicrobial substances were resistant to proteolytic enzymes and temperature as high as 121℃.

Effects of trace element and purification on properties of AZ80 magnesium allo

The effects of trace element Fe on the corrosion behavior of AZ80 magnesium alloy were investigated by salt spray test and electrochemical measurements.The results show that the corrosion rate decreases with decreasing the trace element Fe content in an approximately linear relation even though the amount of trace element Fe reduces to 0.000 2%(mass fraction).The electrochemical measurements show that the corrosion potential(φcorr)of the alloy with lower trace element Fe content shifts to less negative value.It is suggested that the control trace element by purification is an effective way to enhance the corrosion resistance of AZ80 magnesium alloy.

Purification and some properties of a β-glucanase from a strain, Trichoderma reesei GXC

glucanase was purified from a solid\|state culture of \%Trichoderma reesei \%on wheat bran in three steps which comprised ammonium sulfate precipitation, Sephadex G\|100 chromatography, and DEAE\|Sephadex A\|50 chromatography. The molecular mass was determined to be 35.21 kilodaltons by sodium dodecyl sulfate\|12.5% polyacrylamide gel electrophoresis. The \%β\%\|glucanase at low pHs was more stable than that at high pHs, and optimum pH was 5.0. The optimum temperature was 60 ℃, and \%β\%\|glucanase was relatively stable at below 40 ℃ for 60 min. The \%K\%\-m of the enzyme on \%β\%\|glucan was 10.86 mg/ml, and the \%V\%\-\{max\} on \%β\%\|glucan was 14286 μmol of glucose equivalents per mg of the pure enzyme per min. The \%β\%\|glucanase activity was significantly inhibited by Fe\+\{3+\} ions, and was reduced in the presence of Cu\+\{2+\} ions, Mn\+\{2+\} ions and Mg\+\{2+\} ions at 5 mmol/L and 10 mmol/L, respectively. The \%β\%\|glucanase activity was stimulated by Co\+\{2+\} ions, Ca\+\{2+\} ions, Zn\+\{2+\} ions, and Fe\+\{2+\} ions at 1 mmol/L and 5 mmol/L, respectively.

Purification and Some Properties of Endo-1,4-β-Glucanases of Trichoderma harzianum UzCF-28

This work aimed at isolation, purification and study of biochemical features of cellulolytic enzymes synthesized by Trichoderma harzianum UzCF-28 strain. Strain UzCF-28 revealed a high cellulolytic activity during submerged cultivation in the liquid culture on modified Mandels nutrient medium, where wheat straw was used as a source of carbon. As a result of purification by precipitation with ammonium sulfate and further ion exchange chromatography, two isoforms of endo- 1,4-β-glucanase-EG II and EG III with molecular weight of 135 and 75 kDa respectively were revealed. The pH optimum for EG I and EG III was 4.5, while for EG II—4.7, irrespective of the applied substrates—either CMC or “Whatman filter” paper. Heating up to 40°C of EG III did not lead to its inactivation, and on the contrary, its activity increased by more than three times comparing to the initial activity of the enzyme, i.e. thermostability of EG III among tested enzymes significantly varied.

Properties and Characteristics of Regolith-Based Materials for Extraterrestrial Construction

The construction of extraterrestrial bases has become a new goal in the active exploration of deep space.Among the construction techniques,in situ resource-based construction is one of the most promising because of its good sustainability and acceptable economic cost,triggering the development of various types of extraterrestrial construction materials.A comprehensive survey and comparison of materials from the perspective of performance was conducted to provide suggestions for material selection and optimization.Thirteen types of typical construction materials are discussed in terms of their reliability and applicability in extreme extraterrestrial environment.Mechanical,thermal and optical,and radiation-shielding properties are considered.The influencing factors and optimization methods for these properties are analyzed.From the perspective of material properties,the existing challenges lie in the comprehensive,long-term,and real characterization of regolith-based construction materials.Correspondingly,the suggested future directions include the application of high-throughput characterization methods,accelerated durability tests,and conducting extraterrestrial experiments.

Physical,mechanical and thermal properties of vacuum sintered HUST-1 lunar regolith simulant

Establishing a base on the Moon is one of the new goals of human lunar exploration in recent years.Sintered lunar regolith is one of the most potential building materials for lunar bases.The physical,mechanical and thermal properties of sintered lunar regolith are vital performance indices for the structural design of a lunar base and analysis of many critical mechanical and thermal issues.In this study,the HUST-1 lunar regolith simulant(HLRS)was sintered at 1030,1040,1050,1060,1070,and 1080℃.The effect of sintering temperature on the compressive strength was investigated,and the exact value of the optimum vacuum sintering temperature was determined between 1040 and 1060℃.Then,the microstructure and material composition of vacuum sintered HLRS at different temperatures were characterized.It was found that the sintering temperature has no significant effect on the mineral composition in the temperature range of 1030-1080℃.Besides,the heat capacity,thermal conductivity,and coefficient of thermal expansion(CTE)of vacuum sintered HLRS at different temperatures were investigated.Specific heat capacity of sintered samples increases with the increase of test temperature within the temperature range from-75 to 145℃.Besides,the thermal conductivity of the sintered sample is proportional to density.Finally,the two temperatures of 1040 and 1050℃were selected for a more detailed study of mechanical properties.The results showed that compressive strength of sintered sample is much higher than tensile strength.This study reveals the effects of sintering temperature on the physical,mechanical and thermal properties of vacuum sintered HLRS,and these material parameters will provide support for the construction of future lunar bases.

High-throughput calculations combining machine learning to investigate the corrosion properties of binary Mg alloys

Magnesium(Mg)alloys have shown great prospects as both structural and biomedical materials,while poor corrosion resistance limits their further application.In this work,to avoid the time-consuming and laborious experiment trial,a high-throughput computational strategy based on first-principles calculations is designed for screening corrosion-resistant binary Mg alloy with intermetallics,from both the thermodynamic and kinetic perspectives.The stable binary Mg intermetallics with low equilibrium potential difference with respect to the Mg matrix are firstly identified.Then,the hydrogen adsorption energies on the surfaces of these Mg intermetallics are calculated,and the corrosion exchange current density is further calculated by a hydrogen evolution reaction(HER)kinetic model.Several intermetallics,e.g.Y_(3)Mg,Y_(2)Mg and La_(5)Mg,are identified to be promising intermetallics which might effectively hinder the cathodic HER.Furthermore,machine learning(ML)models are developed to predict Mg intermetallics with proper hydrogen adsorption energy employing work function(W_(f))and weighted first ionization energy(WFIE).The generalization of the ML models is tested on five new binary Mg intermetallics with the average root mean square error(RMSE)of 0.11 eV.This study not only predicts some promising binary Mg intermetallics which may suppress the galvanic corrosion,but also provides a high-throughput screening strategy and ML models for the design of corrosion-resistant alloy,which can be extended to ternary Mg alloys or other alloy systems.

A review on the multi-scaled structures and mechanical/thermal properties of tool steels fabricated by laser powder bed fusion additive manufacturing

The laser powder bed fusion(LPBF) process can integrally form geometrically complex and high-performance metallic parts that have attracted much interest,especially in the molds industry.The appearance of the LPBF makes it possible to design and produce complex conformal cooling channel systems in molds.Thus,LPBF-processed tool steels have attracted more and more attention.The complex thermal history in the LPBF process makes the microstructural characteristics and properties different from those of conventional manufactured tool steels.This paper provides an overview of LPBF-processed tool steels by describing the physical phenomena,the microstructural characteristics,and the mechanical/thermal properties,including tensile properties,wear resistance,and thermal properties.The microstructural characteristics are presented through a multiscale perspective,ranging from densification,meso-structure,microstructure,substructure in grains,to nanoprecipitates.Finally,a summary of tool steels and their challenges and outlooks are introduced.

Tetrahedral framework nucleic acids/hyaluronic acidmethacrylic anhydride hybrid hydrogel with antimicrobial and anti-inflammatory properties for infected wound healing

Bacterial resistance and excessive inflammation are common issues that hinder wound healing.Antimicrobial peptides(AMPs)offer a promising and versatile antibacterial option compared to traditional antibiotics,with additional anti-inflammatory properties.However,the applications of AMPs are limited by their antimicrobial effects and stability against bacterial degradation.TFNAs are regarded as a promising drug delivery platform that could enhance the antibacterial properties and stability of nanodrugs.Therefore,in this study,a composite hydrogel(HAMA/t-GL13K)was prepared via the photocross-linking method,in which tFNAs carry GL13K.The hydrogel was injectable,biocompatible,and could be instantly photocured.It exhibited broad-spectrum antibacterial and anti-inflammatory properties by inhibiting the expression of inflammatory factors and scavenging ROS.Thereby,the hydrogel inhibited bacterial infection,shortened the wound healing time of skin defects in infected skin full-thickness defect wound models and reduced scarring.The constructed HAMA/tFNA-AMPs hydrogels exhibit the potential for clinical use in treating microbial infections and promoting wound healing.

Effects of deformation temperatures on microstructures,aging behaviors and mechanical properties of Mg-Gd-Er-Zr alloys fabricated by hard-plate rolling

In this investigation,a high-strength Mg-12Gd-1.0Er-0.5Zr(wt.%)alloy sheet was produced by hot extrusion(HE)and subsequent hard-plate rolling(HPR)at different temperatures.The results indicate that the microstructures of these final-rolled sheets are inhomogeneous,mainly including coarse deformed grains and dynamic recrystallized(DRXed)grains,and the volume fraction of these coarse deformed grains increases as the rolling temperature increases.Thus,more DRXed grains can be found in R-385℃sheet,resulting in a smaller average grain size and weaker basal texture,while the biggest grains and the highest strong basal texture are present in R-450℃sheet.Amounts of dynamic precipitation ofβphases which are mainly determined by the rolling temperature are present in these sheets,and its precipitation can consume the content of Gd solutes in the matrix.As a result,the lowest number density ofβphase in R-450℃sheet is beneficial to modify the age hardening response.Thus,the R-450℃sheet displays the best age hardening response because of a severe traditional precipitation ofβ’(more)andβH/βM(less)precipitates,resulting in a sharp improvement in strength,i.e.ultimate tensile strength(UTS)of∼518±17 MPa and yield strength(YS)of∼438±18 MPa.However,the elongation(EL)of this sheet reduces greatly,and its value is∼2.7±0.3%.By contrasting,the EL of the peak-aging R-385℃sheet keeps better,changing from∼4.9±1.2%to∼4.8±1.4%due to a novel dislocation-induced chain-like precipitate which is helpful to keep good balance between strength and ductility.

Machine learning applications on lunar meteorite minerals:From classification to mechanical properties prediction

Amid the scarcity of lunar meteorites and the imperative to preserve their scientific value,nondestructive testing methods are essential.This translates into the application of microscale rock mechanics experiments and scanning electron microscopy for surface composition analysis.This study explores the application of Machine Learning algorithms in predicting the mineralogical and mechanical properties of DHOFAR 1084,JAH 838,and NWA 11444 lunar meteorites based solely on their atomic percentage compositions.Leveraging a prior-data fitted network model,we achieved near-perfect classification scores for meteorites,mineral groups,and individual minerals.The regressor models,notably the KNeighbor model,provided an outstanding estimate of the mechanical properties—previously measured by nanoindentation tests—such as hardness,reduced Young’s modulus,and elastic recovery.Further considerations on the nature and physical properties of the minerals forming these meteorites,including porosity,crystal orientation,or shock degree,are essential for refining predictions.Our findings underscore the potential of Machine Learning in enhancing mineral identification and mechanical property estimation in lunar exploration,which pave the way for new advancements and quick assessments in extraterrestrial mineral mining,processing,and research.

Microstructures,corrosion behavior and mechanical properties of as-cast Mg-6Zn-2X(Fe/Cu/Ni)alloys for plugging tool applications

Mg-6Zn-2X(Fe/Cu/Ni)alloys were prepared through semi-continuous casting,with the aim of identifying a degradable magnesium(Mg)alloy suitable for use in fracturing balls.A comparative analysis was conducted to assess the impacts of adding Cu and Ni,which result in finer grains and the formation of galvanic corrosion sites.Scanner electronic microscopy examination revealed that precipitated phases concentrated at grain boundaries,forming a semi-continuous network structure that facilitated corrosion penetration in Mg-6Zn-2Cu and Mg-6Zn-2Ni alloys.Pitting corrosion was observed in Mg-6Zn-2Fe,while galvanic corrosion was identified as the primary mechanism in Mg-6Zn-2Cu and Mg-6Zn-2Ni alloys.Among the tests,the Mg-6Zn-2Ni alloy exhibited the highest corrosion rate(approximately 932.9 mm/a)due to its significant potential difference.Mechanical testing showed that Mg-6Zn-2Ni alloy possessed suitable ultimate compressive strength,making it a potential candidate material for degradable fracturing balls,effectively addressing the challenges of balancing strength and degradation rate in fracturing applications.