Ammonium bisulfate(ABS)is a viscous compound produced by the escape NH_(3) in the NO reduction process and SO_(3) in the flue gas at a certain temperature,which can cause the ash corrosion of the air preheater in coal...Ammonium bisulfate(ABS)is a viscous compound produced by the escape NH_(3) in the NO reduction process and SO_(3) in the flue gas at a certain temperature,which can cause the ash corrosion of the air preheater in coal-fired power plants.Therefore,it is essential to study the formation temperature of ABS to prevent the deposition of ABS in air preheaters.In this paper,the SO_(3) reaction kinetic model is used to analyze the SO_(3) generation process from coal combustion to the selective catalytic reduction(SCR)exit stage,and the kinetic model of NO reduction is used to analyze the NH_(3) escape process.A prediction model for calculating the ABS formation temperature based on the S content in coal and NO reduction parameters of the SCR is proposed,solving the difficulty of measuring SO_(3) concentration and NH_(3) concentration in the previous calculation equation of ABS formation temperature.And the reliability of the model is verified by the actual data of the power plant.Then the influence of S content in coal,NH_(3)/NO_(x) molar ratio,different NO_(x) concentrations at SCR inlet,and NO removal efficiency on the formation temperature of ABS are analyzed.展开更多
In order to improve the cold start performance of heavy duty diesel engine, electronically controlling the preheating of intake air by flame was researched. According to simulation and thermodynamic analysis about th...In order to improve the cold start performance of heavy duty diesel engine, electronically controlling the preheating of intake air by flame was researched. According to simulation and thermodynamic analysis about the partial working processes of the diesel engine, the amount of heat energy, enough to make the fuel self ignite at the end of compression process at different temperatures of coolant and intake air, was calculated. Several HY20 preheating plugs were used to heat up the intake air. Meanwhile, an electronic control system based on 8 bit micro controller unit (MCS 8031) was designed to automatically control the process of heating intake air. According to the various temperatures of coolant and ambient air, one plug or two plugs can automatically be selected to heat intake air. The demo experiment validated that the total system could operate successfully and achieve the scheduled function.展开更多
This numerical study investigates the effects of using a diluted fuel （50% natural gas and 50% N2） in an industrial furnace under several cases of conventional combustion （air with 21% O2 at 300 and 1273 K） and th...This numerical study investigates the effects of using a diluted fuel （50% natural gas and 50% N2） in an industrial furnace under several cases of conventional combustion （air with 21% O2 at 300 and 1273 K） and the highly preheated and diluted air （1273 K with 10% O2 and 90% N2） combustion （HPDAC） conditions using an in-house computer program. It was found that by applying a combined diluted fuel and oxidant instead of their uncombined and/or undiluted states, the best condition is obtained for the establishment of HPDAC＇s main unique features. These features are low mean and maximum gas temperature and high radiation/total heat transfer to gas and tubes; as well as more uniformity of theirs distributions which results in decrease in NOx pollutant formation and increase in furnace efficiency or energy saving. Moreover, a variety of chemical flame shape, the process fluid and tubes walls temperatures profiles, the required regenerator efficiency and finally the concentration and velocity patterns have been also qualitatively/quantitatively studied.展开更多
In this paper the premixed catalytic combustion emissions such as CO, unburned hydrocarbon (UHC), NOx and the temperature distribution in the catalytic monolith with ultra low concentration of Pd were studied. Three t...In this paper the premixed catalytic combustion emissions such as CO, unburned hydrocarbon (UHC), NOx and the temperature distribution in the catalytic monolith with ultra low concentration of Pd were studied. Three types of monoliths were used for experiments and the temperature of preheated air was respectively 50℃ , 100℃ and 200℃ . The results showed that preheated air made radial temperature in the catalytic monolith uniform which helped to avoid local hot spots so as to decrease NOx emission. The experiment also proved that the shorter monolith showed much better catalytic combustion performance than longer one and the temperature at the exit of the shorter monolith was relatively lower. On the contrary, the temperature was higher in the longer monolith and the lethal NOx emission was slightly increased.展开更多
An experimental study on heat transfer and resistance coefficients of linearly arranged smooth and spirally corrugated tube bundles in cross-flow was performed. The heat transfer and resistance coefficients are presen...An experimental study on heat transfer and resistance coefficients of linearly arranged smooth and spirally corrugated tube bundles in cross-flow was performed. The heat transfer and resistance coefficients are presented in this paper with transverse and longitudinal tube-pitch and tube geometries taken into account. The experiment's results can provide technical guidelines for application to horizontal air preheater with arranged in-line spirally corrugated tube bundles, especially to the air preheater for CFBCBs (Circulating Fluidized Bed Combustion Boilers).展开更多
基金the Key Research and Development Plan of Shandong Province (2019GSF109004)Natural Science Foundation of Shandong Province (ZR2020ME190) for funding and supporting this work
文摘Ammonium bisulfate(ABS)is a viscous compound produced by the escape NH_(3) in the NO reduction process and SO_(3) in the flue gas at a certain temperature,which can cause the ash corrosion of the air preheater in coal-fired power plants.Therefore,it is essential to study the formation temperature of ABS to prevent the deposition of ABS in air preheaters.In this paper,the SO_(3) reaction kinetic model is used to analyze the SO_(3) generation process from coal combustion to the selective catalytic reduction(SCR)exit stage,and the kinetic model of NO reduction is used to analyze the NH_(3) escape process.A prediction model for calculating the ABS formation temperature based on the S content in coal and NO reduction parameters of the SCR is proposed,solving the difficulty of measuring SO_(3) concentration and NH_(3) concentration in the previous calculation equation of ABS formation temperature.And the reliability of the model is verified by the actual data of the power plant.Then the influence of S content in coal,NH_(3)/NO_(x) molar ratio,different NO_(x) concentrations at SCR inlet,and NO removal efficiency on the formation temperature of ABS are analyzed.
文摘In order to improve the cold start performance of heavy duty diesel engine, electronically controlling the preheating of intake air by flame was researched. According to simulation and thermodynamic analysis about the partial working processes of the diesel engine, the amount of heat energy, enough to make the fuel self ignite at the end of compression process at different temperatures of coolant and intake air, was calculated. Several HY20 preheating plugs were used to heat up the intake air. Meanwhile, an electronic control system based on 8 bit micro controller unit (MCS 8031) was designed to automatically control the process of heating intake air. According to the various temperatures of coolant and ambient air, one plug or two plugs can automatically be selected to heat intake air. The demo experiment validated that the total system could operate successfully and achieve the scheduled function.
基金Supported by the National Iranian Oil Company (NIOC)
文摘This numerical study investigates the effects of using a diluted fuel （50% natural gas and 50% N2） in an industrial furnace under several cases of conventional combustion （air with 21% O2 at 300 and 1273 K） and the highly preheated and diluted air （1273 K with 10% O2 and 90% N2） combustion （HPDAC） conditions using an in-house computer program. It was found that by applying a combined diluted fuel and oxidant instead of their uncombined and/or undiluted states, the best condition is obtained for the establishment of HPDAC＇s main unique features. These features are low mean and maximum gas temperature and high radiation/total heat transfer to gas and tubes; as well as more uniformity of theirs distributions which results in decrease in NOx pollutant formation and increase in furnace efficiency or energy saving. Moreover, a variety of chemical flame shape, the process fluid and tubes walls temperatures profiles, the required regenerator efficiency and finally the concentration and velocity patterns have been also qualitatively/quantitatively studied.
基金Supported by the Key Project of the National 973 Program of China (No.2005CB724201)the Natural Science Foundation ofBeijing (No.06C0002)the Beijing Education Commission Key Laboratory of Heat Transfer and Energy Conversion Fund(No.05005790200406).
文摘In this paper the premixed catalytic combustion emissions such as CO, unburned hydrocarbon (UHC), NOx and the temperature distribution in the catalytic monolith with ultra low concentration of Pd were studied. Three types of monoliths were used for experiments and the temperature of preheated air was respectively 50℃ , 100℃ and 200℃ . The results showed that preheated air made radial temperature in the catalytic monolith uniform which helped to avoid local hot spots so as to decrease NOx emission. The experiment also proved that the shorter monolith showed much better catalytic combustion performance than longer one and the temperature at the exit of the shorter monolith was relatively lower. On the contrary, the temperature was higher in the longer monolith and the lethal NOx emission was slightly increased.
文摘An experimental study on heat transfer and resistance coefficients of linearly arranged smooth and spirally corrugated tube bundles in cross-flow was performed. The heat transfer and resistance coefficients are presented in this paper with transverse and longitudinal tube-pitch and tube geometries taken into account. The experiment's results can provide technical guidelines for application to horizontal air preheater with arranged in-line spirally corrugated tube bundles, especially to the air preheater for CFBCBs (Circulating Fluidized Bed Combustion Boilers).
