Effects of air damping on quality factors of different probes in tapping mode atomic force microscopy

The AFM probe in tapping mode is a continuous process of energy dissipation,from moving away from to intermittent contact with the sample surfaces.At present,studies regarding the energy dissipation mechanism of this continuous process have only been reported sporadically,and there are no systematic explanations or experimental verifications of the energy dissipation mechanism in each stage of the continuous process.The quality factors can be used to characterize the energy dissipation in TM-AFM systems.In this study,the vibration model of the microcantilever beam was established,coupling the vibration and damping effects of the microcantilever beam.The quality factor of the vibrating microcantilever beam under damping was derived,and the air viscous damping when the probe is away from the sample and the air squeeze film damping when the probe is close to the sample were calculated.In addition,the mechanism of the damping effects of different shapes of probes at different tip–sample distances was analyzed.The accuracy of the theoretical simplified model was verified using both experimental and simulation methods.A clearer understanding of the kinetic characteristics and damping mechanism of the TM-AFM was achieved by examining the air damping dissipation mechanism of AFM probes in the tapping mode,which was very important for improving both the quality factor and the imaging quality of the TM-AFM system.This study’s research findings also provided theoretical references and experimental methods for the future study of the energy dissipation mechanism of micro-nano-electromechanical systems.

Relationship between the Water Body Chlorophylla and Water Quality Factors of Wetlands Baiguishan Reservoir

[Objective] The aim was to explore the relationship between water body Chlorophyll-a and water quality factors of wetlands Baiguishan reservoir.[Method] Chlorophyll-a and water quality factors of water quality of Wetlands BaiGuishan Reservoir was studied,the analysis of the relationship on water quality of Wetlands Baiguishan Reservoir was made by use of trophic status indices and SPSS17.0 statistical analysis.[Result] Total phosphorus was an important factor of influence Chlorophyll-a in reservoir,water body had slight eutrophication phenomenon in reservoir of July to October in 2010.[Conclusion] Comprehensive management should be strengthened so as to improve the water quality of Baiguishan wetland.

Comparison of Mode Quality Factors for Equilateral Triangular, Square and Rhombus Optical Micro-Resonators

The mode frequencies and the quality factors for the equilateral triangular resonator (ETR), the square resonator (SR) and the rhombus resonator (RR) are numerically calculated by the finite difference time domain technique and the Padé approximation. The numerical results show that the resonant modes confined in an equilateral triangular cavity have much higher quality factors than those in the square or the rhombus cavities. The modes in the ETR are totally confined in transverse direction while those in the SR and RR are only partly confined. For the ETR with the side length of 4μm and the refractive index of 3 2, the mode quality factor of about 5 5×10 3 at the wavelength of 1 55μm has been obtained.

Estimation of quality factors by energy ratio method

The quality factor Q, which reflects the energy attenuation of seismic waves in subsurface media, is a diagnostic tool for hydrocarbon detection and reservoir characterization. In this paper, we propose a new Q extraction method based on the energy ratio before and after the wavelet attenuation, named the energy-ratio method（ERM）. The proposed method uses multipoint signal data in the time domain to estimate the wavelet energy without invoking the source wavelet spectrum, which is necessary in conventional Q extraction methods, and is applicable to any source wavelet spectrum; however, it requires high-precision seismic data. Forward zero-offset VSP modeling suggests that the ERM can be used for reliable Q inversion after nonintrinsic attenuation（geometric dispersion, refl ection, and transmission loss） compensation. The application to real zero-offset VSP data shows that the Q values extracted by the ERM and spectral ratio methods are identical, which proves the reliability of the new method.

Bulk GaN-based SAW resonators with high quality factors for wireless temperature sensor

Surface acoustic wave(SAW)resonator with outstanding quality factors of 4829/6775 at the resonant/anti-resonant frequencies has been demonstrated on C-doped semi-insulating bulk GaN.The impact of device parameters including aspect ratio of length to width of resonators,number of interdigital transducers,and acoustic propagation direction on resonator performance have been studied.For the first time,we demonstrate wireless temperature sensing from 21.6 to 120℃ with a stable temperature coefficient of frequency of–24.3 ppm/℃ on bulk GaN-based SAW resonators.

Changing trends and influencing factors of the quality of life of chemotherapy patients with breast cancer

Objective： To understand the changing trajectory of quality of life（QOL） during the treatment courses of breast cancer patients during chemotherapy and to investigate the factors in each treatment course that affect QOL.Methods： The M.D. Anderson Symptom Inventory Scale, the Hospital Anxiety and Depression Scale（HADS）, and the Functional Assessment of Cancer Therapy-Breast（FACT-B） scale were used to perform a survey on 174 breast cancer patients who received the TAC（docetaxel, Adriamycin, and cyclophosphamide） chemotherapy regimen before postoperative chemotherapy and 5-7 days after each chemotherapy course.Results： The QOL scores of the breast cancer patients were the lowest before the postoperative chemotherapy（81.2 ± 19.6） and the highest after the second chemotherapy course（94.5 ± 14.4）. After the fourth and fifth chemotherapy courses, the scores were much lower again, with values of 82.7 ± 13.9and 82.6 ± 13.1, respectively. The scores improved again after the sixth chemotherapy course（93.9 ± 18.7）. Furthermore, each treatment course had different related symptoms that affected the QOL of the patients.Conclusions： More attention should be paid to the changing trajectory of QOL of patients in all treatment courses and to the influence of treatment-related symptoms on the QOL of patients; moreover, interventions should be adopted by medical care personnel to increase QOL in cancer patients.

Measurement of the cavity-loaded quality factor in superconducting radio-frequency systems with mismatched source impedance

The accurate measurement of parameters such as the cavity-loaded quality factor(Q_(L))and half bandwidth(f_(0.5))is essential for monitoring the performance of superconducting radio-frequency cavities.However,the conventional"field decay method"employed to calibrate these values requires the cavity to satisfy a"zero-input"condition.This can be challenging when the source impedance is mismatched and produce nonzero forward signals(V_(f))that significantly affect the measurement accuracy.To address this limitation,we developed a modified version of the"field decay method"based on the cavity differential equation.The proposed approach enables the precise calibration of f_(0.5) even under mismatch conditions.We tested the proposed approach on the SRF cavities of the Chinese Accelerator-Driven System Front-End Demo Superconducting Linac and compared the results with those obtained from a network analyzer.The two sets of results were consistent,indicating the usefulness of the proposed approach.

A WSN Node Fault Diagnosis Model Based on BRB with Self-Adaptive Quality Factor

Wireless sensor networks (WSNs) operate in complex and harshenvironments;thus, node faults are inevitable. Therefore, fault diagnosis ofthe WSNs node is essential. Affected by the harsh working environment ofWSNs and wireless data transmission, the data collected by WSNs containnoisy data, leading to unreliable data among the data features extracted duringfault diagnosis. To reduce the influence of unreliable data features on faultdiagnosis accuracy, this paper proposes a belief rule base (BRB) with a selfadaptivequality factor (BRB-SAQF) fault diagnosis model. First, the datafeatures required for WSN node fault diagnosis are extracted. Second, thequality factors of input attributes are introduced and calculated. Third, themodel inference process with an attribute quality factor is designed. Fourth,the projection covariance matrix adaptation evolution strategy (P-CMA-ES)algorithm is used to optimize the model’s initial parameters. Finally, the effectivenessof the proposed model is verified by comparing the commonly usedfault diagnosis methods for WSN nodes with the BRB method consideringstatic attribute reliability (BRB-Sr). The experimental results show that BRBSAQFcan reduce the influence of unreliable data features. The self-adaptivequality factor calculation method is more reasonable and accurate than thestatic attribute reliability method.

Impact factors and improvement measures of enviroment quality in cleaning operating room

Objective To analyze the factors that impact the environment quality of cleaning operating room and to discuss improvement measurement. Methods Environment bacteria testing results and prevalence of surgical incision infection in cleaning operating room were retro-

Investigation on photonic crystal nanobeam cavity based on mixed diamond–circular holes

A photonic crystal nanobeam cavity(M-PCNC)with a structure incorporating a mixture of diamond-shaped and circular air holes is pro-posed.The performance of the cavity is simulated and studied theoretically.Using thefinite-difference time-domain method,the parameters of the M-PCNC,including cavity thickness and width,lattice constant,and radii and numbers of holes,are optimized,with the quality factor Q and mode volume Vm as performance indicators.Mutual modulation of the lattice constant and hole radius enable the proposed M-PCNC to realize outstanding performance.The optimized cavity possesses a high quality factor Q 1.45105 and an ultra-small mode=×volume Vm 0.01(λ/n)[Zeng et al.,Opt Lett 2023:48;3981–3984]in the telecommunications wavelength range.Light can be progres-=sively squeezed in both the propagation direction and the perpendicular in-plane direction by a series of interlocked anti-slots and slots in the diamond-shaped hole structure.Thereby,the energy can be confined within a small mode volume to achieve an ultra-high Q/Vm ratio.

A mechanically coupled MEMS filter with high-Q width extensional mode resonators

This work presents a novel radio frequency(RF)narrowband Si micro-electro-mechanical systems(MEMS)filter based on capacitively transduced slotted width extensional mode(WEM)resonators.The flexibility of the plate leads to multiple modes near the target frequency.The high Q-factor resonators of around 100000 enable narrow bandwidth filters with small size and simplified design.The 1-wavelength and 2-wavelength WEMs were first developed as a pair of coupled modes to form a passband.To reduce bandwidth,two plates are coupled with aλ-length coupling beam.The 79.69 MHz coupled plate filter(CPF)achieved a narrow bandwidth of 8.8 kHz,corresponding to a tiny 0.011%.The CPF exhibits an impressive 34.84 dB stopband rejection and 7.82 dB insertion loss with near-zero passband ripple.In summary,the RF MEMS filter presented in this work shows promising potential for application in RF transceiver front-ends.

Effects of Water Quality on the Distribution of Chinese Giant Salamander(Andrias davidianus)in Guizhou Province,China

13 water quality parameters were tested from 38 reaches of 34 counties in Guizhou where Chinese giant salamander(Andrias davidianus) distributed over the past 30 years. Dissolved oxygen and p H were found to be significant determinants of the species distribution in recent years(P<0.05). There was no Chinese giant salamander distribution in the recent five years in rivers with dissolved solids of greater than 415 mg/L, conductivity of greater than 639 us/cm, salinity of greater than 0.31 ppt and total hardness of greater than 150 mg/L. Sensitive to environment, the Chinese giant salamander is an important indicator for environmental quality, so it could be used as one of the environmental indicator. Eutrophication, chemical fertilizer, pesticides and inorganic pollutants may be one of reasons driving wild CGS into extinction.

Comparative Analysis on the Quality Components in Vicia faba L. of Different Genotypes

With 12 Vicia faba L. varieties of different genotypes as the research ma- terials, the contents of 9 kinds of quality factors of protein, fat, free amino acid as well as beneficial mineral elements were analyzed with the aim to provide the nec- essary theoretical basis for the selection of new varieties of high quality faba beans. The results showed that in the faba beans of different genotypes, the protein content ranged from 27.9% to 31.2%, fat content of 1.2-1.4%, tannin content of 4 700-5 280 mg/kg, iron content of 47.45-67.15 mgJkg, calcium content of 571.30-1 397.22 mg/kg, zinc content of 47.34-66.10 mg/kg, potassium content of 1.09-1.38%, and selenium content ranged from 0.031 mg/kg to 0.064 mg/kg. There were significant differences in the contents of different free amino acids between different genotypes, and the total free amino acid content was between 1.062% and 0.915%.

Novel S-slot DGS with high quality factor

In order to solve the problem that the quality factor （ Q factor） of the conventional defected ground structure （DGS）is not high and cannot produce a sharp resonant band, a novel S-slot DGS is presented. Compared with the conventional DGS, the proposed S-slot DGS has a much higher Q factor, a quite simpler layout and a steeper band rejection. Its equivalent circuit model is extracted by analyzing the transfer characteristics, and design parameters are calculated according to the deducted equations. Characteristics of this type of DGS are investigated with variable dimension parameters and an experiential method for the design of the S-slot DGS is summarized. Finally, a sample of a compact S-slot DGS unit resonated at 4. 64 GHz is fabricated. Its Q factor is as high as 39. 66 and its size is only 5.00 mm × 1.40 mm, with a steep resonant band and a low insertion-loss passband. The measured results show a good agreement with simulation, which demonstrates the applicability of the S-slot DGS in practical engineering.

Modeling and Analysis of Mechanical Quality Factor of the Resonator for Cylinder Vibratory Gyroscope

Mechanical Quality factor（Q factor） of the resonator is an important parameter for the cylinder vibratory gyroscope（CVG）. Traditional analytical methods mainly focus on a partial energy loss during the vibration process of the CVG resonator, thus are not accurate for the mechanical Q factor prediction. Therefore an integrated model including air damping loss, surface defect loss, support loss, thermoelastic damping loss and internal friction loss is proposed to obtain the mechanical Q factor of the CVG resonator. Based on structural dynamics and energy dissipation analysis, the contribution of each energy loss to the total mechanical Q factor is quantificationally analyzed. For the resonator with radius ranging from 10 mm to 20 mm, its mechanical Q factor is mainly related to the support loss, thermoelastic damping loss and internal friction loss, which are fundamentally determined by the geometric sizes and material properties of the resonator. In addition, resonators made of alloy 3J53 （Ni42CrTiA1）, with different sizes, were experimentally fabricated to test the mechanical Q factor. The theoretical model is well verified by the experimental data, thus provides an effective theoretical method to design and predict the mechanical Q factor of the CVG resonator.

Ultrahigh accelerating gradient and quality factor of CEPC 650 MHz superconducting radio-frequency cavity

Two 650 MHz single-cell superconducting radio-frequency(SRF)cavities used for the Circular Electron Positron Collider(CEPC)were studied to achieve a high accelerating gradient(E_(acc))and high intrinsic quality factor(Q_(0)).The 650 MHz single-cell cavities were subjected to a combination of buffered chemical polishing(BCP)and electropolishing(EP),and their E_(acc) exceeded40 MV/m.Such a high E_(acc) may result from the cold EP with more uniform removal.BCP is easy,cheap,and rough,whereas EP is complicated,expensive,and precise Therefore,the combination of BCP and EP investigated in this study is suitable for surface treatments of mass SRF cavities.Medium temperature(mid-T)furnace baking was also conducted,which demonstrated an ultrahigh Q_(0) of 8×10^(10) at 22 MV/m for both cavities,and an extremely low BCS resistance(R_(BCS))of~1.0 nΩwas achieved a2.0 K.

Joint inversion method for interval quality factor based on amplitude and phase information

Estimating the quality factor Q accurately signifi cantly improves the seismic data resolution and reservoir characterization.The commonly used log-spectral ratio method uses least-squares fi tting to obtain Q values and involves only the amplitude information of seismic data while neglecting phase information.This paper proposes a joint interval Q inversion method based on the spectral ratio method and employs both amplitude and phase information to improve the accuracy.Based on the assumption that Q is independent of frequency,the nonlinear relation between the Q value and the two types of information is jointly used to construct an objective function,which clarifies the quantitative relation between amplitude spectrum,phase information,and Q value.The interval Q value can be inverted by calculating the minimum value of the objective function.The model test exhibits that the proposed method has higher precision and stability than the spectral ratio method;furthermore,the application to field data demonstrates that accurate Q inversion results are consistent with reservoir characteristics.

Effect of the desolventizing/toasting process on chemical composition and protein quality of rapeseed meal

Background： During processing in a desolventizer/toaster（DT）, rapeseed meal（RSM） is heated to evaporate the hexane and to reduce the level of heat-labile anti-nutritional factors such as glucosinolates（GSL）. However, excessive heat treatment may reduce amino acid（AA） content in addition to lower AA digestibility and availability in RSM. The objective of the present study was to produce from one batch of a 00-rapeseed variety（17 μmol GSL/g dry matter（DM）, seed grade quality） five differently processed RSM under standardized and defined conditions in a pilot plant,and to determine the impact of these different treatments on protein solubility and chemical composition, in particular with regard to contents of AA including reactive Lys（rL ys） and levels of total and individual GSL.Methods： Four RSM were exposed to wet toasting conditions（WetT C） with increasing residence time in the DT of 48,64, 76, and 93 min. A blend of these four RSM was further processed, starting with saturated steam processing（〈 100 °C）and followed by exposure to dry toasting conditions（DryT C） to further reduce the GSL content in this RSM.Results： The contents of neutral detergent fiber and neutral detergent fiber bound crude protein（CP） increased linearly（P 〈 0.05）, as residence time of RSM in the DT increased from 48 to 93 min, whereas contents of total and most individual GSL and those of Lys, rL ys, Cys, and the calculated ratio of Lys：CP and r Lys：CP decreased linearly（P ≤ 0.05）.The combination of wet heating and DryT C resulted in the lowest GSL content compared to RSM produced under WetT C, but was associated with lowest protein solubility.Conclusions： It can be concluded that by increasing residence time in the DT or using alternative processing conditions such as wet heating combined with DryT C, contents of total and individual GSL in RSM can be substantially reduced.Further in vivo studies are warranted to elucidate if and to which extent the observed differences in protein quality and GSL content between RSM may affect digestibility and bioavailability of AA in monogastric animals.

Quality of Sleep at the Ward after Cardiothoracic Surgery

Objective: Sleeping problems are among the issues most mentioned by patients after cardiothoracic surgery. These problems can have a negative effect on duration of the hospital stay and recovery. In the ward of our cardiothoracic surgery department, a study was initiated to assess the quality of sleep after cardiothoracic surgery. The primary objective was to investigate the effect of cardiothoracic surgery on the quality of sleep. The secondary objective was to investigate the quality of sleep. Correlations with perioperative factors and related issues such as the type of surgery and medication were sought. Methods: A consecutive prospective cohort study was initiated (N = 72). The study used validated questionnaires to assess sleep: the Pittsburgh Sleep Quality Index (PSQI), the Epworth Sleepiness Scale (ESS), the Verran Snyder-Halpern Sleep Scale (VSH) and the Factors Influencing Sleep Quality (FISQ). Results: The PSQI showed that the quality of sleep one month after surgery was inferior to the quality of sleep before surgery (p-value: 0.03). The efficiency of sleep (time spent in bed) was higher after surgery then before surgery (p-value: 0.01). The VSH showed increased impaired sleep on the third night after surgery. The most disruptive factors were not being comfortable in a hospital bed, pain and the noise of medical devices. Conclusions: The quality of sleep after cardiothoracic surgery is worse when compared with the preoperative situation. The chief influencing factors are discomfort in bed, pain and disturbance from medical devices. The use of pain medication does not improve the quality of sleep.

A high-quality-factor ultra-narrowband perfect metamaterial absorber based on monolayer molybdenum disulfide

In order to significantly improve the absorption efficiency of monolayer molybdenum disulfide(M-MoS_(2)), an ultranarrowband M-MoS_(2)metamaterial absorber was obtained through theoretical analysis and numerical calculation using the finite difference time domain method. The physical mechanism can be better analyzed through critical coupling and guided mode resonance. Its absorption rate at λ = 806.41 nm is as high as 99.8%, which is more than 12 times that of bare MMoS_(2). From the simulation results, adjusting the geometric parameters of the structure can control the resonant wavelength range of the M-MoS_(2). In addition, we also found that the maximum quality factor is 1256.8. The numerical result shows that the design provides new possibilities for ultra-narrowband M-MoS_(2) perfect absorbers in the near-infrared spectrum.The results of this work indicate that the designed structure has excellent prospects for application in wavelength-selective photoluminescence and photodetection.