Steering quantum nonlocalities of quantum dot system suffering from decoherence

The important applications of quantum dot system are to implement logic operations and achieve universal quantum computing based on different quantum nonlocalities.Here,we characterize the quantum steering,Bell nonlocality,and nonlocal advantage of quantum coherence(NAQC)of quantum dot system suffering nonunital and unital channels.The results reveal that quantum steering,Bell nonlocality,and NAQC can display the traits of dissipation,enhancement,and freezing.One can achieve the detections of quantum steering,Bell nonlocality,and NAQC of quantum dot system in different situations.Among these quantum nonlocalities,NAQC is the most fragile,and it is most easily influenced by different system parameters.Furthermore,considering quantum dot system coupling with amplitude damping channel and phase damping channel,these quantum nonlocalities degenerate with the enlargement of the channel parameters t andΓ.Remarkably,measurement reversal can effectively control and enhance quantum steering,Bell nonlocality,and NAQC of quantum dot system suffering from decoherence,especially in the scenarios of the amplitude damping channel and strong operation strength.

Effects of van Hove Singularities on Transport of Quantum Dot Systems in Kondo Regime

In the present paper, we study the effect of van Hove singularities of conduction electron on the transport of a single quantum dot system in the Kondo regime. By using both the equation-of-motion and the noncrossing approximation techniques, we show that the corrections caused by these singularities are actually minor. It can be explained by observing that the singularities in the equations, which determine the electronic DOS on the dot, are integrable. Furthermore, we find that, although each line width function is divergent at van Hove singular points, the total divergence is canceled out in the final formula to calculate the current through the system. Therefore, as far as the qualitative properties of the system is concerned, these singularities can be ignored and the wide-band approximation can be safely used in calculation.

Single-particle distribution function of a quantum dot system at finite temperature

In the present paper, we shall rigorously re-establish the result of the single-particle function of a quantum dot system at finite temperature. Unlike the proof given in our previous work （Phys. Rev. B 74 195414 （2006））, we take a different approach, which does not exploit the explicit expression of the Gibbs distribution function. Instead, we only assume that the statistical distribution function of the quantum dot system is thermodynamically stable. As a result, we are able to show clearly that the electronic structure in the quantum dot system is completely determined by its thermodynamic stability. Furthermore, the weaker requirements on the statistical distribution function also make it possible to apply the same method to the quantum dot systems in non-equilibrium states.

Fano Effect and Anti-Resonance Band in a Parallel-Coupled Double Quantum Dot System with Two Multi-Quantum Dot Chains

A parallel-coupled double quantum dot （PCDQD） system with two multi-quantum dot chains is designed. Conductance versus Fermi energy level is investigated utilizing the non-equilibrium Green＇s function approach. If two quantum dots are added on each side of the PCDQD system, additional Breit Wigner and Fano resonances occur in the conductance spectra. If quantum dots are added on one side of the system, small Fano resonances can be observed in the conductance spectra. Adjusting the number of side-coupled quantum dots, the anti-resonance bands emerge at different positions, which makes the system applicable as a quantum switching device. Moreover, the I-V characteristic curve presents the step characteristic and the width of the step decreases with increasing the number of side-coupled quantum dots.

Entanglement Transfer Between Cavity Fields and Excitons in a Driven Quantum Dot System

We investigate entanglement transfer from two separate cavities to the excitons in two quantum dots separately placed in the two cavities. The cavity fields and the excitons are treated as two continuous-variable （CV） subsystems. The time-dependent characteristic functions in the Wigner representation for the two subsystems are analytically obtained. Under the conditions that one of the two CV subsystems is initially prepared in a two-mode squeezed vacuum state and the other in its lowest energy state, we show that the entanglement reciprocation between the cavity fields and the excitons is realizable.

Quantum Information Transfer from a Double Quantum Dot System to a Cavity Field

In this paper, we propose a scheme to realize quantum information transfer from a double quantum dot （DQD） system to a quantized cavity field. The DQD and the cavity field are treated as a two-state charge qubit and a continuous-variable system, respectively. It is shown that quantum information encoded in the two-state DQD system can be transferred to quantum states of the cavity field with a continuous-variable basis through appropriate projective measurements with respect to the DQD.

Electron transfer properties of double quantum dot system in a fluctuating environment

Using the innovative method of the additional Bloch vector,the electron transfer properties of a double quantum dot(DQD) system measured by a quantum point contact(QPC) in a fluctuating environment are investigated.The results show that the environmental noises in transverse and longitudinal directions play different roles in the dynamical evolution of the open quantum systems.Considering the DQD with symmetric energy level,the Fano factor exhibits a slight peak with the increase of transverse noise amplitude σ_(T),which provides a basis for distinguishing dynamical phenomena caused by different directional fluctuation noises in symmetric DQD structures by studying the detector output.In the case of asymmetric DQD,the dependence of a detector current involving the level displacement is distinct when increasing the transverse noise damping coefficient τ_(T) and the longitudinal noise damping coefficient τ_(ε) respectively.Meanwhile,the transverse noise damping coefficient τ_(T) could significantly reduce the Fano factor and enhance the stability of the quantum system compared with the longitudinal one.The Fano factors with stable values as the enhancement of noise amplitudes show different external influences from the detector measurement,and provide a numerical reference for adjusting the noise amplitudes in both transverse and longitudinal directions appropriately in a microscopic experimental process to offset the decoherence effect caused by the measurements.Finally,the research of average waiting time provides unique insights to the development of single electron transfer theory in the short-time limit.

Fano effect of a parallel-coupled triple Rashba quantum dot system

Using the nonequilibrium Keldysh Green＇s function technique, the Fano effect of a parallel-coupled triple Rashba quantum dot system is investigated. The conductance as a function of electron energy is numerically calculated. Compared with the case of a parallel-coupled double quantum dot system, two additional Fano resonance peaks occur in the conductance spectrum. By adjusting the structural parameters, the two Fano resonance peaks may change into the resoaance peaks. In addition, the influence of Rashba spin-orbit interaction on the conductance is studied.

Fano effect of a laterally coupled vertical triple quantum dot system

Using the nonequilibrium Green＇s function technique,electron transport through a laterally coupled vertical triple quantum dot is investigated.The conductance as a function of electron energy is numerically calculated.The evolution of the conductance strongly depends on the configuration of dot levels and interdot coupling strengths.

Using a quantum dot system to realize perfect state transfer

There are some disadvantages to Nikolopoulos et al.＇s protocol [Nikolopoulos G M, Petrosyan D and Lambropoulos P 2004 Europhys. Left. 65 297] where a quantum dot system is used to realize quantum communication. To overcome these disadvantages, we propose a protocol that uses a quantum dot array to construct a four-qubit spin chain to realize perfect quantum state transfer （PQST）. First, we calculate the interaction relation for PQST in the spin chain. Second, we review the interaction between the quantum dots in the Heitler-London approach. Third, we present a detailed program for designing the proper parameters of a quantum dot array to realize PQST.

Energy shift and subharmonics induced by nonlinearity in a quantum dot system

The presence of anticrossings induced by coupling between two states causes curvature in energy levels, yielding a nonlinearity in the quantum system. When the system is driven back and forth along the bending energy levels, subharmonic transitions and energy shifts can be observed, which would cause a significant influence as the system is applied to quantum computing. In this paper, we study a longitudinally driven singlet-triplet(ST) system in a double quantum dot(DQD)system, and illustrate the consequences of nonlinearity by driving the system close to the anticrossings. We provide a straightforward theory to quantitatively describe the energy shift and subharmonics caused by nonlinearity, and find good agreement between our theoretical result and the numerical simulation. Our results reveal the existence of nonlinearity in the vicinity of anticrossings and provide a direct way of analytically assessing its impact, which can be applied to other quantum systems without excessive labor.

Majorana fermion realization and relevant transport processes in a triple-quantum dot system

Nonequilibrium electronic transports through a system hosting three quantum dots hybridized with superconductors are investigated. By tuning the relative positions of the dot levels, we illustrate the existence of Majorana fermions and show that the Majorana feimions will either survive separately on single dots or distribute themselves among different dots with tunable probabilities. As a result, different physical mechanisms appear, including local Andreev reflection（LAR）,cross Andreev reflection（CAR）, and cross resonant tunneling（CRT）. The resulting characteristics may be used to reveal the unique properties of Majorana fermions. In addition, we discuss the spin-polarized transports and find a pure spin current and a spin filter effect due to the joint effect of CRT and CAR, which is important for designing spintronic devices.

Phonon-dependent transport through a serially coupled double quantum dot system

Using Keldysh nonequilibrium Green function formalism and mapping a many-body electron-phonon interaction onto a one body problem, the electron transport through a serially coupled double quantum dot system is analyzed. The influence of the electron-phonon interaction, temperature, detuning, and interdot tunneling on the transmission coefficient and current is studied. Our results show that the electron-phonon interaction results in the appearance of the side peaks in the transmission coefficient, whose height is strongly dependent on the phonon temperature. We have also found that the inequality of the electron-phonon interaction strength in two dots gives rise to an asymmetry in the current-voltage characteristic. In addition, the temperature difference between the phonon and electron subsystems results in the reduction of the saturated current and the destruction of the step-like behavior of the current. It is also observed that the detuning can improve the magnitude of the current by compensating the mismatch of the quantum dots energy levels induced by the electron-phonon interaction.

N-doped graphene quantum dot-decorated N-TiO2/P-doped porous hollow g-C_(3)N_(4) nanotube composite photocatalysts for antibiotic photodegradation and H2 production

Exclusive responsiveness to ultraviolet light (~3.2 eV) and high photogenerated charge recombination rate are the two primary drawbacks of pure TiO_(2). We combined N-doped graphene quantum dots (N-GQDs), morphology regulation, and heterojunction construction strategies to synthesize N-GQD/N-doped TiO_(2)/P-doped porous hollow g-C_(3)N_(4) nanotube (PCN) composite photocatalysts (denoted as G-TPCN). The optimal sample (G-TPCN doped with 0.1wt% N-GQD, denoted as 0.1% G-TPCN) exhibits significantly enhanced photoabsorption, which is attributed to the change in bandgap caused by elemental doping (P and N), the improved light-harvesting resulting from the tube structure, and the upconversion effect of N-GQDs. In addition, the internal charge separation and transfer capability of0.1% G-TPCN are dramatically boosted, and its carrier concentration is 3.7, 2.3, and 1.9 times that of N-TiO_(2), PCN, and N-TiO_(2)/PCN(TPCN-1), respectively. This phenomenon is attributed to the formation of Z-scheme heterojunction between N-TiO_(2) and PCNs, the excellent electron conduction ability of N-GQDs, and the short transfer distance caused by the porous nanotube structure. Compared with those of N-TiO_(2), PCNs, and TPCN-1, the H2 production activity of 0.1%G-TPCN under visible light is enhanced by 12.4, 2.3, and 1.4times, respectively, and its ciprofloxacin (CIP) degradation rate is increased by 7.9, 5.7, and 2.9 times, respectively. The optimized performance benefits from excellent photoresponsiveness and improved carrier separation and migration efficiencies. Finally, the photocatalytic mechanism of 0.1% G-TPCN and five possible degradation pathways of CIP are proposed. This study clarifies the mechanism of multiple modification strategies to synergistically improve the photocatalytic performance of 0.1% G-TPCN and provides a potential strategy for rationally designing novel photocatalysts for environmental remediation and solar energy conversion.

Coupling of BiOCl Ultrathin Nanosheets with Carbon Quantum Dots for Enhanced Photocatalytic Performance

Over the past few decades,photocatalysis technology has received extensive attention because of its potential to mitigate or solve energy and environmental pollution problems.Designing novel materials with outstanding photocatalytic activities has become a research hotspot in this field.In this study,we prepared a series of photocatalysts in which BiOCl nanosheets were modified with carbon quantum dots(CQDs)to form CQDs/BiOCl composites by using a simple solvothermal method.The photocatalytic performance of the resulting CQDs/BiOCl composite photocatalysts was assessed by rhodamine B and tetracycline degradation under visible-light irradiation.Compared with bare BiOCl,the photocatalytic activity of the CQDs/BiOCl composites was significantly enhanced,and the 5 wt%CQDs/BiOCl composite exhibited the highest photocatalytic activity with a degradation efficiency of 94.5%after 30 min of irradiation.Moreover,photocatalytic N_(2)reduction performance was significantly improved after introducing CQDs.The 5 wt%CQDs/BiOCl composite displayed the highest photocatalytic N_(2)reduction performance to yield NH_3(346.25μmol/(g h)),which is significantly higher than those of 3 wt%CQDs/BiOCl(256.04μmol/(g h)),7 wt%CQDs/BiOCl(254.07μmol/(g h)),and bare BiOCl(240.19μmol/(g h)).Our systematic characterizations revealed that the key role of CQDs in improving photocatalytic performance is due to their increased light harvesting capacity,remarkable electron transfer ability,and higher photocatalytic activity sites.

Proton‑Prompted Ligand Exchange to Achieve High‑Efficiency CsPbI_(3) Quantum Dot Light‑Emitting Diodes

CsPbI_(3)perovskite quantum dots(QDs)are ideal materials for the next generation of red light-emitting diodes.However,the low phase stability of CsPbI_(3)QDs and long-chain insulating capping ligands hinder the improvement of device performance.Traditional in-situ ligand replacement and ligand exchange after synthesis were often difficult to control.Here,we proposed a new ligand exchange strategy using a proton-prompted insitu exchange of short 5-aminopentanoic acid ligands with long-chain oleic acid and oleylamine ligands to obtain stable small-size CsPbI_(3)QDs.This exchange strategy maintained the size and morphology of CsPbI_(3)QDs and improved the optical properties and the conductivity of CsPbI_(3)QDs films.As a result,high-efficiency red QD-based light-emitting diodes with an emission wavelength of 645 nm demonstrated a record maximum external quantum efficiency of 24.45%and an operational half-life of 10.79 h.

Experimental and computational study of annealed nickel sulfide quantum dots for catalytic and antibacterial activity

This research investigates the hydrothermal synthesis and annealing duration effects on nickel sulfide(NiS_(2) quantum dots(QDs)for catalytic decolorization of methylene blue(MB)dye and antimicrobial efficacy.QD size increased with longer annealing,reducing catalytic activity.UV–vis,XRD,TEM,and FTIR analyses probed optical structural,morphological,and vibrational features.XRD confirmed NiS2's anorthic structure,with crystallite size growing from 6.53 to 7.81 nm during extended annealing.UV–Vis exhibited a bathochromic shift,reflecting reduced band gap energy(Eg)in NiS_(2).TEM revealed NiS_(2)QD formation,with agglomerated QD average size increasing from 7.13 to 9.65 nm with prolonged annealing.Pure NiS_(2) showed significant MB decolorization(89.85%)in acidic conditions.Annealed NiS_(2) QDs demonstrated notable antibacterial activity,yielding a 6.15mm inhibition zone against Escherichia coli(E.coli)compared to Ciprofloxacin.First-principles computation supported a robust interaction between MB and NiS_(2),evidenced by obtained adsorption energies.This study highlights the nuanced relationship between annealing duration,structural changes,and functional properties in NiS_(2)QDs,emphasizing their potential applications in catalysis and antibacterial interventions.

Efficient PbS quantum dots tandem solar cells through compatible interconnection layer

Lead sulfide quantum dots(PbS QDs) hold unique characteristics, including bandgap tunability, solutionprocessability etc., which make them highly applicable in tandem solar cells(TSCs). In all QD TSCs, its efficiency lags much behind to their single junction counterparts due to the deficient interconnection layer(ICL) and defective subcells. To improve TSCs performance, we developed three kinds of ICL structures based on 1.34 and 0.96 e V PbS QDs subcells. The control, 1,2-ethanedithiol capped PbS QDs(PbS-EDT)/Au/tin dioxide(SnO_(2))/zinc oxide(Zn O), utilized SnO_(2) layer to obtain high surface compactness.However, its energy level mismatch causes incomplete recombination. Bypassing it, the second ICL(PbS-EDT/Au/Zn O) removed SnO_(2) and boosted the power conversion efficiency(PCE) from 5.75% to 8.69%. In the third ICL(PbS-EDT/poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine](PTAA)/Au/Zn O), a thin layer of PTAA can effectively fill fissures on the surface of PbS-EDT and also protect the front cells from solvent penetration. This TSC obtained a PCE of 9.49% with an open circuit voltage of 0.91 V, a short circuit current density of 15.47 m A/cm~2, and a fill factor of 67.7%. To the best of our knowledge, this was the highest PCE achieved by all PbS QD TSCs reported to date. These TSCs maintained stable performance for a long working time under ambient conditions.

Advantageous properties of halide perovskite quantum dots towards energy-efficient sustainable applications

As lead halide perovskite(LHP)semiconductors have shown tremendous promise in many application fields,and particularly made strong impact in the solar photovoltaic area,low dimensional quantum dot forms of these perovskites are showing the potential to make distinct marks in the fields of electronics,optoelectronics and photonics.The so-called perovskite quantum dots(PQDs)not only possess the most important features of LHP materials,i.e.,the unusual high defect tolerance,but also demonstrate clear quantum size effects,along with exhibiting desirable optoelectronic properties such as near perfect photoluminescent quantum yield,multiple exciton generation and slow hot-carrier cooling.Here,we review the advantageous properties of these nanoscale perovskites and survey the prospects for diverse applications which include lightemitting devices,solar cells,photocatalysts,lasers,detectors and memristors,emphasizing the distinct superiorities as well as the challenges.

High-Performance Perovskite Solar Cells with Zwitterion-Capped-ZnO Quantum Dots as Electron Transport Layer and NH_(4)X(X=F,Cl,Br)Assisted Interfacial Engineering

The systematic advances in the power conversion efficiency(PCE)and stability of perovskite solar cells(PSCs)have been driven by the developments of perovskite materials,electron transport layer(ETL)materials,and interfacial passivation between the relevant layers.While zinc oxide(ZnO)is a promising ETL in thin film photovoltaics,it is still highly desirable to develop novel synthetic methods that allow both fine-tuning the versatility of ZnO nanomaterials and improving the ZnO/perovskite interface.Among various inorganic and organic additives,zwitterions have been effectively utilized to passivate the perovskite films.In this vein,we develop novel,well-characterized betaine-coated ZnO QDs and use them as an ETL in the planar n-i-p PSC architecture,combining the ZnO QDs-based ETL with the ZnO/perovskite interface passivation by a series of ammonium halides(NH_(4)X,where X=F,Cl,Br).The champion device with the NH4F passivation achieves one of the highest performances reported for ZnO-based PSCs,exhibiting a maximum PCE of~22%with a high fill factor of 80.3%and competitive stability,retaining~78%of its initial PCE under 1 Sun illumination with maximum power tracking for 250 h.