Improved method for analyzing quasi-optical launchers

An improved method for analyzing the radiation characteristic of the quasi-optical launcher is presented. The launcher is decomposed into an open-ended waveguide and a helical cut according to the proposed method. The radiation from the open-ended waveguide is obtained by using the Stratton-Chu formulation. The helical cut＇s radiation is calculated based on its current distribution, gained by several iterative computations, which helps to improve the calculation accuracy since the diffraction effect introduced by the helical cut is considered during the calculation. The proposed method is used to study different launches, and the results are compared with the existing results. Good agreement is achieved between the results obtained from our proposed method and the reported results. The present results provide an alternative for analysis and synthesis of the optical-mode converter.

Asymmetrical mirror optimization for a 140 GHz TE_(22,6) quasi-optical mode converter system

We introduce an asymmetrical mirror design to a 140 GHz TE_（22,6） quasi-optical（QO） mode converter system to correct the asymmetry of the beam＇s field distribution caused by the Denisov launcher. By such optimization, the output beam with better symmetrical distribution is obtained at the system＇s output window. Based on the calculated results,the QO mode converter system＇s performance is already satisfying without iterative phase correction. Scalar and vector correlation coefficients between the output beam and the fundamental Gaussian beam are respectively 98.4% and 93.0%,while the total power transmission efficiency of the converter system is 94.4%. The assistance of optical ray tracing to the design of such QO mode converters is introduced and discussed as well.

Denisov-type quasi-optical mode converter forhigher-order asymmetric volume mode gyrotron

The principle and design method of Denisov-type quasi-optical mode converter is investigated indetail. The operation process of the Denisov-type launcher is analyzed by applying the geometrical optics, andthe Gaussian-like field distribution achieved on the waveguide wall is also derived. The method for designing arippled-wall launcher is proposed on the basis of coupled mode theory. A simulation code for Denisov-type qua-si-optical mode converter GQOMC-D is developed based on coupled mode theory, vector diffraction integrationand physical optics, which is compared to the design parameters and experimental results reported in literaturefor its validity. According to this code, a Denisov-type quasi-optical mode converter used in 110 GHz TE22.6mode gyrotron oscillators is designed. Simulation results indicate that a Gaussian-like beam is obtained at theoutput window with a scalar content of 98.4 % and a conversion efficiency of 94.7 %.

Study of a 105 GHz short-pulse dummy load for the electron cyclotron resonance heating system with the quasi-optical method

The accurate power measurement is important for an ECRH system in tokamak.The dummy load is designed and developed for the measurement of the millimeter wave power.This work analyzes the dummy load based on the quasi-optical method and the ray tracing method.The reflectivity and thermal deposition of the dummy load have been considered to ensure the safety of the entire system.High-power tests have been carried out at a 105 GHz/500 kW ECRH system.The results of the tests indicate that the designed dummy load is stable and valid.

AN ANALYSIS ON INPUT IMPEDANCE OF A SINGLE MICROSTRIP PATCH IN THE QUASI-OPTICAL CAVITY

The electromagnetic field integral equation in the quasi-optical cavity is obtained using the dyadic Green’s function. An expression is derived for the input impedance of a single microstrip patch cavity excited by a coaxial probe using moment method. The input impedance of a rectangular microstrip patch is discussed with this method. The result of this paper is similar to that of the microstrip antenna. This paper is of very important value for designing microstrip quasi-optical oscillator.

Prescribed Performance Tracking Control of Time-Delay Nonlinear Systems With Output Constraints

The problem of prescribed performance tracking control for unknown time-delay nonlinear systems subject to output constraints is dealt with in this paper. In contrast with related works, only the most fundamental requirements, i.e., boundedness and the local Lipschitz condition, are assumed for the allowable time delays. Moreover, we focus on the case where the reference is unknown beforehand, which renders the standard prescribed performance control designs under output constraints infeasible. To conquer these challenges, a novel robust prescribed performance control approach is put forward in this paper.Herein, a reverse tuning function is skillfully constructed and automatically generates a performance envelop for the tracking error. In addition, a unified performance analysis framework based on proof by contradiction and the barrier function is established to reveal the inherent robustness of the control system against the time delays. It turns out that the system output tracks the reference with a preassigned settling time and good accuracy,without constraint violations. A comparative simulation on a two-stage chemical reactor is carried out to illustrate the above theoretical findings.

A frequency servo SoC with output power stabilization loop technology for miniaturized atomic clocks

A frequency servo system-on-chip(FS-SoC)featuring output power stabilization technology is introduced in this study for high-precision and miniaturized cesium(Cs)atomic clocks.The proposed power stabilization loop(PSL)technique,incorporating an off-chip power detector(PD),ensures that the output power of the FS-SoC remains stable,mitigating the impact of power fluctuations on the atomic clock's stability.Additionally,a one-pulse-per-second(1PPS)is employed to syn-chronize the clock with GPS.Fabricated using 65 nm CMOS technology,the measured phase noise of the FS-SoC stands at-69.5 dBc/Hz@100 Hz offset and-83.9 dBc/Hz@1 kHz offset,accompanied by a power dissipation of 19.7 mW.The Cs atomic clock employing the proposed FS-SoC and PSL obtains an Allan deviation of 1.7×10^(-11) with 1-s averaging time.

Design of Quasi-Optical Lens Antenna for W-Band Short Range Passive Millimeter-Wave Imaging

A quasi-optical dielectric lens used for W-band focal plane array passive imaging has been developed. The imaging system requires the lens to form beam spot with 3 dB width less than 35 mm at distance of 3500 mm. The powerful optical design software ZEMAX was utilized to design the contours of the lens, and numerical method based on ray tracing and Huygens’ Principle was processed to verify the design result. Measurement result shows that the 3 dB width of the beam spot formed by the lens is 34 mm at distance of 3460 mm, and the beam pattern on imaging plane are equally arranged and the intensity decreases only 0.55 dB while the object lateral deviation increases to 300 mm.

Adaptive Optimal Discrete-Time Output-Feedback Using an Internal Model Principle and Adaptive Dynamic Programming

In order to address the output feedback issue for linear discrete-time systems, this work suggests a brand-new adaptive dynamic programming(ADP) technique based on the internal model principle(IMP). The proposed method, termed as IMP-ADP, does not require complete state feedback-merely the measurement of input and output data. More specifically, based on the IMP, the output control problem can first be converted into a stabilization problem. We then design an observer to reproduce the full state of the system by measuring the inputs and outputs. Moreover, this technique includes both a policy iteration algorithm and a value iteration algorithm to determine the optimal feedback gain without using a dynamic system model. It is important that with this concept one does not need to solve the regulator equation. Finally, this control method was tested on an inverter system of grid-connected LCLs to demonstrate that the proposed method provides the desired performance in terms of both tracking and disturbance rejection.

Achieving Given Precision Within Prescribed Time yet With Guaranteed Transient Behavior via Output Based Event-Triggered Control

It is interesting yet nontrivial to achieve given control precision within user-assignable time for uncertain nonlinear systems.The underlying problem becomes even more challenging if the transient behavior also needs to be accommodated and only system output is available for feedback.Several key design innovations are proposed to circumvent the aforementioned technical difficulties,including the employment of state estimation filters with event-triggered mechanism,the construction of a novel performance scaling function and an error transformation.In contrast to most existing performance based works where the stability is contingent on initial conditions and the maximum allowable steady-state tracking precision can only be guaranteed at some unknown(theoretically infinite)time,in this work the output of the system is ensured to synchronize with the desired trajectory with arbitrarily pre-assignable convergence rate and arbitrarily pre-specified precision within prescribed time,using output only with lower cost of sensing and communication.In addition,all the closed-loop signals are ensured to be globally uniformly bounded under the proposed control method.The merits of the designed control scheme are confirmed by numerical simulation on a ship model.

Event-triggered robust cooperative output regulation for a class of linear multi-agent systems with an unknown exosystem

This paper investigates the robust cooperative output regulation problem for a class of heterogeneousuncertain linear multi-agent systems with an unknown exosystem via event-triggered control (ETC). By utilizingthe internal model approach and the adaptive control technique, a distributed adaptive internal model isconstructed for each agent. Then, based on this internal model, a fully distributed ETC strategy composed ofa distributed event-triggered adaptive output feedback control law and a distributed dynamic event-triggeringmechanism is proposed, in which each agent updates its control input at its own triggering time instants. It isshown that under the proposed ETC strategy, the robust cooperative output regulation problem can be solvedwithout requiring either the global information associated with the communication topology or the bounds ofthe uncertain or unknown parameters in each agent and the exosystem. A numerical example is provided toillustrate the effectiveness of the proposed control strategy.

Asynchronous Learning-Based Output Feedback Sliding Mode Control for Semi-Markov Jump Systems: A Descriptor Approach

This paper presents an asynchronous output-feed-back control strategy of semi-Markovian systems via sliding mode-based learning technique.Compared with most literature results that require exact prior knowledge of system state and mode information,an asynchronous output-feedback sliding sur-face is adopted in the case of incompletely available state and non-synchronization phenomenon.The holonomic dynamics of the sliding mode are characterized by a descriptor system in which the switching surface is regarded as the fast subsystem and the system dynamics are viewed as the slow subsystem.Based upon the co-occurrence of two subsystems,the sufficient stochastic admissibility criterion of the holonomic dynamics is derived by utilizing the characteristics of cumulative distribution functions.Furthermore,a recursive learning controller is formulated to guarantee the reachability of the sliding manifold and realize the chattering reduction of the asynchronous switching and sliding motion.Finally,the proposed theoretical method is substantia-ted through two numerical simulations with the practical contin-uous stirred tank reactor and F-404 aircraft engine model,respectively.

Adaptive Optimal Output Regulation of Interconnected Singularly Perturbed Systems With Application to Power Systems

This article studies the adaptive optimal output regulation problem for a class of interconnected singularly perturbed systems(SPSs) with unknown dynamics based on reinforcement learning(RL).Taking into account the slow and fast characteristics among system states,the interconnected SPS is decomposed into the slow time-scale dynamics and the fast timescale dynamics through singular perturbation theory.For the fast time-scale dynamics with interconnections,we devise a decentralized optimal control strategy by selecting appropriate weight matrices in the cost function.For the slow time-scale dynamics with unknown system parameters,an off-policy RL algorithm with convergence guarantee is given to learn the optimal control strategy in terms of measurement data.By combining the slow and fast controllers,we establish the composite decentralized adaptive optimal output regulator,and rigorously analyze the stability and optimality of the closed-loop system.The proposed decomposition design not only bypasses the numerical stiffness but also alleviates the high-dimensionality.The efficacy of the proposed methodology is validated by a load-frequency control application of a two-area power system.

Observer Based Control for a Class of Systems with Output Deadzone Nonlinearity

In this paper, a combination of model based adaptive design along with adaptive linear output feedback controller is used to compensate for robotic manipulator with output deadzone nonlinearity. The deadzone dynamics are utilized to adaptively estimate the deadzone parameter and a switching function is designed to eliminate the error produced in the adaptive observer dynamics. The overall design of the closed loop system ensures stability in the BIBO criterion.

A 3D convolutional neural network model with multiple outputs for simultaneously estimating the reactive transport parameters of sandstone from its CT images

Porosity,tortuosity,specific surface area(SSA),and permeability are four key parameters of reactive transport modeling in sandstone,which are important for understanding solute transport and geochemical reaction pro-cesses in sandstone aquifers.These four parameters reflect the characteristics of pore structure of sandstone from different perspectives,and the traditional empirical formulas cannot make accurate predictions of them due to their complexity and heterogeneity.In this paper,eleven types of sandstone CT images were firstly segmented into numerous subsample images,the porosity,tortuosity,SSA,and permeability of the subsamples were calculated,and the dataset was established.The 3D convolutional neural network(CNN)models were subse-quently established and trained to predict the key reactive transport parameters based on subsample CT images of sandstones.The results demonstrated that the 3D CNN model with multiple outputs exhibited excellent prediction ability for the four parameters compared to the traditional empirical formulas.In particular,for the prediction of tortuosity and permeability,the 3D CNN model with multiple outputs even showed slightly better prediction ability than its single-output variant model.Additionally,it demonstrated good generalization per-formance on sandstone CT images not included in the training dataset.The study showed that the 3D CNN model with multiple outputs has the advantages of simplifying operation and saving computational resources,which has the prospect of popularization and application.

The Impact of The Three-Dimensional Cultivation Model on the Development of the Suzhou Tea Industry:Estimating Value of Output Per Acre and Diversified Sales Models

This article explores the impact of the three-dimensional cultivation mode on the development of the Suzhou tea industry,focusing on the diversified estimation of the value of output per acre and sales mode.It introduces the history and traditional cultivation practices of tea in Suzhou,as well as the current challenges and problems faced by the industry.An in-depth analysis was conducted on the overview and improvement plans of the three-dimensional cultivation mode,covering relevant technical methods.Based on this analysis,the impact of the three-dimensional cultivation on the value of output per acre was studied and predicted.Its potential and advantages were explored and compared with the effectiveness of traditional cultivation models.Additionally,the impact of the three-dimensional cultivation mode on sales was analyzed,examining its market adaptability and competitiveness,as well as its advantages in expanding sales channels and market coverage.The study also focused on the promoting effect of diversified sales models on the Suzhou tea industry,including direct consumption market development,tea processing product development and promotion,and the integration of tea culture and the tourism industry.To ensure sustainable development,the article evaluates the environmental impact,economic feasibility,social benefits,and farmer benefits of the three-dimensional cultivation model.Finally,the prospects for the development of the Suzhou tea industry were discussed,and the positioning and response strategies of the threedimensional cultivation model were proposed.

基于感知与产出视角的维吾尔语辅音/n/的教学策略探析

本文主要以二语习得理论为基础,采用实验语音学的研究方法,以零基础开始学习的新疆大学维吾尔语专业不同水平(从低年级到高年级)学生为实验对象,进行感知和产出实验的研究。感知实验主要研究实验对象对目标辅音/n/的感知能力,结合知觉同化模型(PAM),分析偏误原因,探索维吾尔语辅音/n/的听力教学策略。产出实验主要通过第二共振峰频率跟舌位的关系,分析实验者在不同元音环境下发辅音/n/的舌位位置,结合有关口语的二语习得理论,探索维吾尔语辅音/n/的口语教学策略。

Difference of Nitrogen Uptake and Use Efficiency in Conventional Indica Rice Cultivars with Different Nitrogen Use Efficiency for Grain Output

[Objective] The study aimed to confirm difference of nitrogen uptake and used efficiency with different nitrogen use efficiency for grain output (NUEg) types of indica rice.[Method] 88 and 122 conventional indica rice cultivars were solution-cultured in 2001 and 2002, respectively. Dry matter weight (including root system, culm and sheath, leaves, panicle), nitrogen content of different organs, yield and its components were measured. The tested rice cultivars were classified into 6 types (i.e. A, B, C, D, E and F, A was the lowest, and F was the highest) based on their NUEg level by the MinSSw method.[Result](1)Difference of NUEg of the cultivars used in this study were very large; (2) No significant difference of N content at heading stage was observed among different NUEg types of indica rice. In the cultivars with higher NUEg, however, N content in leaf, stem-sheath and entire rice plant were lower at mature stage. (3)Cultivars with higher NUEg were characterized with lower N uptake before heading and at mature stage; (4) Cultivars with higher NUEg were characterized with higher N use efficiency in biomass production and harvest index. [Conclusion] The cultivars with higher NUEg showed lower N uptake and N content, while nitrogen use efficiency was higher.

Research and Design of an On-Chip High Efficiency Dual-Output Charge Pump

To meet the demands for different supply voltage levels on SOC required by digital modules like CPU core and analog modules,a novel dual-output charge pump is proposed. The charge pump can output a step-up and a step-down voltage simultaneously with a high driving capability. The multiple gain pair technique was introduced to enhance its efficiency. The proposed co-use technology for capacitors and switch arrays reduced its cost. The charge pump was designed and fabricated in a TSMC 0.35μm mixed-signal CMOS process. A group of analytical equations were derived to model its static characteristics. A state-space model was derived to describe its small-signal dynamic behavior. Analytical predictions were verified by Spectre simulation and testing. The consistency of simulated results as well as test results with analytical predictions demonstrated the high precision of the derived analytical equations and the developed models.

Static Output Feedback H_∞ Controllers Design for Descriptor Linear Systems Based on LMI

This paper considers the design problem of static output feedback H ∞ controllers for descriptor linear systems with linear matrix inequality (LMI) approach. Necessary and sufficient conditions for the existence of a static output feedback H ∞ controller are given in terms of LMIs. Furthermore, the design method of H ∞ controllers is provided using the solutions to the LMIs.