期刊文献+
共找到917篇文章
< 1 2 46 >
每页显示 20 50 100
Research on characteristics of integrated type hydraulic transformer's control angle
1
作者 刘成强 Liu Yinshui +1 位作者 Jiang Jihai Yang Guanzhong 《High Technology Letters》 EI CAS 2017年第4期404-409,共6页
In order to realize remote control of hydraulic transformers and improve the control precision of the pressure ratio,an integrated type electric hydraulic servo hydraulic transformer is proposed in this paper,a mathem... In order to realize remote control of hydraulic transformers and improve the control precision of the pressure ratio,an integrated type electric hydraulic servo hydraulic transformer is proposed in this paper,a mathematical model is built and simulation of electro-hydraulic servo integrated hydraulic transformer's control angle is carried out,the principle prototype of the transformer is designed and manufactured,and experimental study is carried out on the experimental bench. The experimental results verify the correctness of the mathematical model. The results show that electro hydraulic servo control can improve the accuracy and dynamic response speed of control angle,which provides a reference for the further research of the hydraulic transformers. 展开更多
关键词 electro-hydraulic servo hydraulic transformer control angle SIMULATION EXPERIMENTAL
下载PDF
Estimation of muscle pennation angle in ultrasound images using the beamlet transform
2
作者 施俊 王锐玲 《Journal of Shanghai University(English Edition)》 2010年第1期34-38,共5页
Ultrasound imaging has been widely used to investigate the architecture properties of skeletal muscle, including the measurement of the pennation angle. In this study, we propose a beamlet-based algorithm to detect th... Ultrasound imaging has been widely used to investigate the architecture properties of skeletal muscle, including the measurement of the pennation angle. In this study, we propose a beamlet-based algorithm to detect the straight line- shaped patterns of aponeurosis, fascicle or bone, and then to quantify the pennation angle ix1 ultrasound images. The results demonstrate that the proposed algorithm can well detect the pennatoin angles in thirty ultrasound images with the correlation coefficient of 0.945, the standard root mean square error of 0.682°, and the relative root mean square error of 3.498%. The results suggest that this beamlet-based algorithm provides an alternative approach for the orientation estimation in muscu- loskeletal ultrasound images. 展开更多
关键词 skeletal muscle pennation angle ultrasound image beamlet transform
下载PDF
Real-domain GMUSIC algorithm based on unitary-transform for low-angle estimation 被引量:1
3
作者 Zheng Liu Yuanyuan Wang Yunhe Cao 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2014年第5期794-799,共6页
In order to realize the elevation angle estimation for low-altitude targets at a low computational cost, a generalized multiple signal classification (GMUSIC) algorithm based on unitary transform is proposed, i.e., ... In order to realize the elevation angle estimation for low-altitude targets at a low computational cost, a generalized multiple signal classification (GMUSIC) algorithm based on unitary transform is proposed, i.e., the DU-GMUSlC algorithm. Firstly, the covariance matrix of received data is used to construct the Centro- Hermitian matrix. Then, the real-domain GMUSIC algorithm is used to implement the initial angle estimation, and the multipath attenuation coefficient is calculated in succession. Finally, the attenuation coefficient is taken into account in the GMUSIC method to carry out the secondary angle estimation which is beneficial to further improvement of the angle estimation accuracy. This method can meet requirements of low-angle accuracy as well as lower computational burden. Simulation results prove the correctness and effectiveness of the proposed algorithm. Moreover, field experiment data are used to further validate the effectiveness of this method. 展开更多
关键词 multipath effect low-angle estimation unitary transform. attenuation coefficient.
下载PDF
Fault Line Selection Method Considering Grounding Fault Angle for Distribution Network 被引量:1
4
作者 Li Si-bo Zhao Yu-lin +1 位作者 Li Ji-chang Sui Tao 《Journal of Northeast Agricultural University(English Edition)》 CAS 2015年第1期58-65,共8页
In the distribution network system with its neutral point grounding via arc suppression coil, when single-phase grounding fault occurred near zero-crossing point of the phase voltage, the inaccuracy of the line select... In the distribution network system with its neutral point grounding via arc suppression coil, when single-phase grounding fault occurred near zero-crossing point of the phase voltage, the inaccuracy of the line selection always existed in existing methods. According to the characteristics that transient current was different between the fault feeder and other faultless feeders, wavelet transformation was performed on data of the transient current within a power frequency cycle after the fault occurred. Based on different fault angles, wavelet energy in corresponding frequency band was chosen to compare. The result was that wavelet energy in fault feeder was the largest of all, and it was larger than sum of those in other faultless feeders, when the bus broke down, the disparity between each wavelet energy was not significant. Fault line could be selected out by the criterion above. The results of MATLAB/simulink simulation experiment indicated that this method had anti-interference capacity and was feasible. 展开更多
关键词 distribution network single-phase grounding fault fault line selection fault angle wavelet transformation
下载PDF
On China's Economy: A Tentative Research from a Dual Visual Angle
5
作者 Guibin Suo Zhiyong Shi 《Chinese Business Review》 2005年第4期80-81,共2页
Most economists approach the economy of China from a single visual angle considering it as a special economic modality of transition economy. Based on the analysis from the single visual angle, the paper puts forward ... Most economists approach the economy of China from a single visual angle considering it as a special economic modality of transition economy. Based on the analysis from the single visual angle, the paper puts forward a dual visual angle treating China's economy as one of both transition and transformation features, and attempts to research it from this dual visual angle. 展开更多
关键词 China's economy transition and transformation dual visual angle
下载PDF
Blind 2-D Angles of Arrival Estimation for Distributed Signals Using L-Shaped Arrays
6
作者 Yi Zheng Xue-Gang Wang Tie-Qi Xia Qun Wan 《Journal of Electronic Science and Technology of China》 2008年第1期83-86,共4页
Most existing two dimensional(2-D)angles of arrival(AOAs)estimation methods are based on the assumption that the signal sources are point sources.However,in mobile communications,local scattering in the vicinity o... Most existing two dimensional(2-D)angles of arrival(AOAs)estimation methods are based on the assumption that the signal sources are point sources.However,in mobile communications,local scattering in the vicinity of the mobile results in angular spreading as seen from a base station antenna array.In this paper,we consider the problem of estimating the 2-D AOAs of spatially distributed sources.First we perform blind estimation of the steering vectors by exploiting joint diagonalization,then the 2-D AOAs are obtained through two fast Fourier transforming of the estimated steering vectors.Simulations are carried out to illustrate the performance of the method. 展开更多
关键词 angles of arrival blind source separation distributed source Fourier transform.
下载PDF
Expression of Mesenger RNA for Transforming Growth Factor-β_1 in Bovine Trabecular Meshwork
7
作者 Liya Yuan, Houren WeiDepartment of Ophthalmology, Union Hospital, Tongji Medical University, Wuhan 430022,China 《Eye Science》 CAS 1996年第1期1-4,共4页
Purpose: To investigate the relationship between transforming growth factor-β1(TGF-β1) and primary open-angle glaucoma, we have determined whether trabec-ular tissues have the expression of messenger RNA for TGF-β1... Purpose: To investigate the relationship between transforming growth factor-β1(TGF-β1) and primary open-angle glaucoma, we have determined whether trabec-ular tissues have the expression of messenger RNA for TGF-β1.Methods: Total RNA of 24 newborn bovine trabecular tissue were extracted byGuanidine isothiocyanate method. The TGF-β33 plasmid was brought into E. col-ibacillius HB101 and amplificated. After Bam HI endolase degradation and labelwith a-32p-dATP the RNA was hybridized with the cDNA (complementary DNA)probe and examined by autoradiography.Results: The presence of mRNA for TGF-β1 in bovine trabecular meshwork wasconfirmed.Conclusions: The TGF-β1 present in normal aqueous humor must be at least partlyderived from the trabecular meshwork. It offered a basis for understanding therelationship between abnormal synthesis, activation and clearance of TGF-β1 andthe pathogenesis of primary open-angle glaucoma (POAG) in molecular biology.Eye Science 1996; 12:1-4. 展开更多
关键词 TRABECULAR MESHWORK transforming growth factor-β1 OPEN-angle GLAUCOMA
下载PDF
Formation of AI/Au Bimetallic Interface Studied by Angle-Resolved X-Ray Photoelectron Spectroscopy (ARXPS)
8
作者 Yaroslav Polyak 《材料科学与工程(中英文A版)》 2015年第9期339-350,共12页
关键词 X射线光电子能谱仪 金属界面 角分辨 人工智能 金属间化合物 形成温度 热力学稳定性 正则化方法
下载PDF
锻态42CrMoA钢热变形软化行为及微观组织演变研究
9
作者 陈迎庆 段兴旺 +1 位作者 贾悦 车鑫 《塑性工程学报》 北大核心 2025年第1期185-192,共8页
以锻态42CrMoA钢的热压缩实验为基础,利用光学显微镜(OM)、扫描电镜(SEM)和电子背散射衍射(EBSD)技术对微观组织进行观察和分析。结果表明:当动态再结晶(DRX)完全时,真应力-真应变曲线有明显的峰值应力和软化特征;当DRX不完全时,真应力... 以锻态42CrMoA钢的热压缩实验为基础,利用光学显微镜(OM)、扫描电镜(SEM)和电子背散射衍射(EBSD)技术对微观组织进行观察和分析。结果表明:当动态再结晶(DRX)完全时,真应力-真应变曲线有明显的峰值应力和软化特征;当DRX不完全时,真应力-真应变曲线没有明显的峰值应力和软化特征。结合EBSD数据可知,母相奥氏体亚结构影响马氏体相变。变形温度越低,应变速率越高,快速冷却后微观组织的中间取向差角晶界(MMAGBs)的比例和平均局部应变越大。由母相奥氏体晶粒和SEM下的微观组织可知,快速冷却后得到的马氏体组织分布与母相奥氏体分布有关,当母相奥氏体晶粒分布均匀时,马氏体组织分布有序和均匀;当母相奥氏体晶粒分布不均匀时,马氏体组织分布无序和不均匀。 展开更多
关键词 锻态42CrMoA钢 软化特征 中间取向差角晶界 平均局部应变 马氏体相变
下载PDF
面阵对称翻转变换用于F-P微小角度测量系统
10
作者 吴晨光 沈小燕 周世南 《中国测试》 北大核心 2025年第1期111-118,共8页
法布里珀罗(F-P)标准具应用于位移和角度测量时,其干涉成像同心圆环圆心坐标的准确计算对测量结果具有关键影响。针对面阵CCD传感器上干涉成像同心圆环在移动时存在的误差,利用干涉成像同心圆环有效信息,提出一种面阵像元正反细分的对... 法布里珀罗(F-P)标准具应用于位移和角度测量时,其干涉成像同心圆环圆心坐标的准确计算对测量结果具有关键影响。针对面阵CCD传感器上干涉成像同心圆环在移动时存在的误差,利用干涉成像同心圆环有效信息,提出一种面阵像元正反细分的对称翻转算法,在理论分析的基础上进行算法和实验验证。将该算法应用于F-P微小角度测量系统并进行比对实验研究。实验结果表明该算法可将圆心坐标标准差减小至0.0028个像素单位;在±150″测量范围内,F-P微小角度测量系统的测量值与ELCOMAT HR自准直仪两者的示值误差不大于0.38″,经拟合修正后两者示值误差不大于0.06″,测量准确度得到有效提高。 展开更多
关键词 F-P标准具 对称翻转变换 像元平滑细分 圆心坐标计算 微小角度测量
下载PDF
高度近视并发POAG机制及早期预测:基于HIF-1α、TGF-β2交互的研究
11
作者 刘家敏 王大萍 刘建华 《眼科新进展》 北大核心 2025年第2期125-130,共6页
目的研究缺氧诱导因子1α(HIF-1α)、转化生长因子-β2(TGF-β2)交互影响高度近视(HM)并发原发性开角型青光眼(POAG)的作用及早期预测价值。方法选取我院2021年2月至2023年6月收治的265例(421眼)HM患者进行前瞻性队列研究,均行全面眼科... 目的研究缺氧诱导因子1α(HIF-1α)、转化生长因子-β2(TGF-β2)交互影响高度近视(HM)并发原发性开角型青光眼(POAG)的作用及早期预测价值。方法选取我院2021年2月至2023年6月收治的265例(421眼)HM患者进行前瞻性队列研究,均行全面眼科检查,光学相干断层扫描测量总Bruch膜开口-盘沿最小宽度(BMO)参数,Humphrey视野仪测量视野指数(VFI)、视野平均缺损(MD)值。随访1年(失访2例),根据是否发生POAG分为发生组(51例82眼)、未发生组(212例337眼)。比较两组患者临床资料[年龄、性别、体重指数(BMI)、中央角膜厚度(CCT)、眼轴长度(AL)、屈光度、VFI、视野MD、视盘水平径、视盘垂直径、椭圆指数、视盘面积、视杯面积、盘沿面积、杯盘面积比、总BMO]及泪液HIF-1α、TGF-β2,绘制泪液HIF-1α、TGF-β2预测HM并发POAG的受试者工作特征曲线(ROC),获取最佳截断值,采用交互作用分析泪液HIF-1α、TGF-β2及交互影响HM并发POAG的作用,采用Pearson法分析泪液HIF-1α、TGF-β2与HM患者视盘结构相关性,并采用ROC分析HIF-1α、TGF-β2联合预测POAG的价值。结果发生组患者的VFI、总BMO均低于未发生组,视野MD、视杯面积、杯盘面积比及泪液HIF-1α、TGF-β2均高于未发生组患者,差异均有统计学意义(均为P<0.05);交互作用分析显示,泪液HIF-1α、TGF-β2两者交互为超相乘模型,对HM并发POAG的影响具有正向交互作用(P<0.05);Pearson相关性分析结果显示,泪液HIF-1α、TGF-β2与HM患者VFI、总BMO均呈负相关,与视野MD、视杯面积、杯盘面积比均呈正相关(均为P<0.05);ROC曲线分析结果显示,泪液HIF-1α联合TGF-β2预测HM并发POAG的曲线下面积(AUC)为0.925(95%CI:0.896~0.949),优于两指标单独预测价值。结论HIF-1α、TGF-β2在HM并发POAG患者泪液中表达上调,且在POAG发生过程中呈正向交互作用,联合检测对POAG具有一定预测价值,可作为临床预测POAG的辅助预测因子,并可指导临床防治。 展开更多
关键词 缺氧诱导因子1Α 转化生长因子-Β2 交互作用 高度近视 原发性开角型青光眼 预测
下载PDF
基于Transformer和注意力机制的角钢塔螺栓缺陷检测模型 被引量:2
12
作者 程智余 张金锋 孙丙宇 《计算机系统应用》 2023年第4期248-254,共7页
螺帽缺失、螺栓缺失是角钢塔建设阶段常见的结构缺陷,但由于特征区分度低现有目标检测算法对螺栓缺陷检出率较低.针对这个问题,首先基于Transformer对卷积特征进行特征编码提出了全局信息提取算子,其次通过通道注意力机制自适应组合候... 螺帽缺失、螺栓缺失是角钢塔建设阶段常见的结构缺陷,但由于特征区分度低现有目标检测算法对螺栓缺陷检出率较低.针对这个问题,首先基于Transformer对卷积特征进行特征编码提出了全局信息提取算子,其次通过通道注意力机制自适应组合候选检测框多尺度缩放后引入的局部背景信息,最后基于图像分割与背景融合对螺栓缺陷样本进行数据扩增.消融实验表明上述策略均能有效提升螺栓缺陷检测效果且相互不排斥,与其他典型算法对比验证了本文算法的先进性. 展开更多
关键词 角钢塔螺栓 缺陷检测 transformer编码器 通道注意力机制
下载PDF
Digital Beamforming by Multiple Chirp Zeta Transforms for 3-D Sonar Imaging Systems
13
作者 袁龙涛 田翔 +1 位作者 韩业强 陈耀武 《Journal of Donghua University(English Edition)》 EI CAS 2012年第5期373-379,共7页
The computational load is prohibitive for real-time image generation in 3-D sonar systems, particularly when the steering angle approximation is required. In this paper, a novel multiple Chirp Zeta Transforms (MCZT)... The computational load is prohibitive for real-time image generation in 3-D sonar systems, particularly when the steering angle approximation is required. In this paper, a novel multiple Chirp Zeta Transforms (MCZT) beamforming method in frequency domain is being proposed. The single long-length Chirp Zeta Transform (CZT) in the original CZT beamforming is replaced by several CZTs with smaller lengths for different partitions along each dimension. The implementing routine of the algorithm is also optimized. Furthermore, an avenue to evaluate the estimating error for the angle approximation in 3-D imaging applications is presented, and an approach to attain valid partitions for the steering angles is also flhistrated. This paper demonstrates a few advantages of the proposed frequency-domain beamforming method over existing methods in terms of the computatianal complexity. 展开更多
关键词 3-D sonar imaging frequency-domain beamforming angle approximation Chirp Zeta transform CZT steering angle partitions computational load evaluation
下载PDF
基于波形群灵敏角特征的输电线路故障单端行波辨识与测距 被引量:2
14
作者 张广斌 王开福 +1 位作者 束洪春 司大军 《中国电机工程学报》 EI CSCD 北大核心 2024年第10期3789-3803,I0004,共16页
针对输电线路单端行波测距难以可靠、有效辨识第二个波头的不足,该文提出基于波形群灵敏角检测的单端行波辨识与测距方法。首先,对线路故障波过程的解析和规律分析,发现波头局部波形呈现灵敏角和非轴对称性的特点。进而提出利用Radon变... 针对输电线路单端行波测距难以可靠、有效辨识第二个波头的不足,该文提出基于波形群灵敏角检测的单端行波辨识与测距方法。首先,对线路故障波过程的解析和规律分析,发现波头局部波形呈现灵敏角和非轴对称性的特点。进而提出利用Radon变换变角度投影检测最灵敏角并判别最灵敏角两侧非轴对称特性,实现单端故障初始行波及多次同极性行波群的可靠辨识。最后,基于多次同极性行波到达时差构造多测距算式,输出最合理测距结果。所提方法将时域波头辨识转化为波形图像空间域最灵敏变化方向和几何轴对称性的检测,抗干扰能力强,大幅提升检测可靠性和后续波头的识别能力,提升单端测距算式冗余性。大量实测和仿真数据测试表明,算法有效、可靠、直观,适用范围广,为单端行波分析故障测距及扩展应用提供了新思路。 展开更多
关键词 故障测距 RADON变换 灵敏角 波头检测 行波 输电线路 轴对称性
下载PDF
基于Transformer与Vector Loss模块的椎骨Cobb角点定位网络
15
作者 陈瑶 高永彬 熊玉洁 《中国医学物理学杂志》 CSCD 2022年第11期1393-1400,共8页
目的:通过定位脊椎骨角点计算Cobb角度数。方法:使用神经网络的方法进行脊椎骨角点坐标的定位,通过嵌入Transformer与Vector Loss模块解决了在清晰度不高、拍摄角度不同的X光图像上计算Cobb角度数精确不高的问题。结果:在MICCAI 2019公... 目的:通过定位脊椎骨角点计算Cobb角度数。方法:使用神经网络的方法进行脊椎骨角点坐标的定位,通过嵌入Transformer与Vector Loss模块解决了在清晰度不高、拍摄角度不同的X光图像上计算Cobb角度数精确不高的问题。结果:在MICCAI 2019公开脊椎挑战赛数据集中,本文方法的平均对称百分比(SMAPE)高达9.01。相较于最新的方法,该方法在SMAPE值上提高了1.80。结论:本文所提出的算法嵌入Transformer与Vector Loss模块,与现有的诸多算法相比,具有较高的准确率和稳健性,可以辅助临床医生选择适合患者的治疗方案。 展开更多
关键词 X光图像 COBB角 transformER Vector Loss 神经网络 辅助诊断
下载PDF
基于激光传感器的无人驾驶变换轨迹跟踪系统
16
作者 陈炜峰 仇昊 +1 位作者 吉爱红 胡凯 《激光杂志》 CAS 北大核心 2024年第1期184-190,共7页
针对常规无人驾驶轨迹跟踪过程依据一个给定的参考轨迹,存在跟踪角度及速度协同性较差、精度较低的问题,提出基于激光传感器的无人驾驶变换轨迹跟踪系统。设计包含激光传感器、电机控制、液晶显示、上位机通讯模块、键盘控制、微控制器... 针对常规无人驾驶轨迹跟踪过程依据一个给定的参考轨迹,存在跟踪角度及速度协同性较差、精度较低的问题,提出基于激光传感器的无人驾驶变换轨迹跟踪系统。设计包含激光传感器、电机控制、液晶显示、上位机通讯模块、键盘控制、微控制器的硬件结构,根据角速度及速度误差调整角速度协同控制器误差,通过神经元加权处理偏置数,优化双推角速度协同控制效果;引入滑模控制器,得到速度控制指令及角速度控制指令回角速度协同控制器,通过轨迹控制器和角速度协同控制器的设计,实现无人驾驶变换轨迹跟踪控制。实验结果表明,应用该系统后,角度轨迹跟踪结果更接近期望角度,直线状态和曲线状态下的轨迹跟踪误差均较小,最高为4 cm,轨迹跟踪精度高、定位准,整体应用效果更佳。 展开更多
关键词 无人驾驶 激光传感器 变换轨迹跟踪系统 期望角度
下载PDF
基于单相双旋转移相变压器的高速铁路系统负序补偿方法
17
作者 颜湘武 李秉桢 +2 位作者 吴炜林 邵晨 彭维锋 《电工技术学报》 EI CSCD 北大核心 2024年第15期4643-4653,共11页
针对高速铁路供电系统在高压电网引起的负序问题,该文参考旋转潮流控制器(RPFC)和静止无功补偿器(SVG)结构,提出一种基于单相双旋转移相变压器(S-DRPST)的新型负序补偿拓扑。首先,分析S-DRPST的工作原理并建立其稳态电压源模型。其次,在... 针对高速铁路供电系统在高压电网引起的负序问题,该文参考旋转潮流控制器(RPFC)和静止无功补偿器(SVG)结构,提出一种基于单相双旋转移相变压器(S-DRPST)的新型负序补偿拓扑。首先,分析S-DRPST的工作原理并建立其稳态电压源模型。其次,在V/x牵引供电系统应用场景下,提出S-DRPST的负序电流补偿方法,即根据供电臂负载功率计算所需补偿电流表达式,进而得到两台S-DRPST输出电压幅值与相位,通过调节移相角大小实现电网侧电流的平衡。在此基础上,对单台S-DRPST移相角控制进行设计,补偿设备投入前利用柔性合环减小对牵引网的冲击,投入后采取移相角协调变速控制,使得移相角在接近设定值时降低转速,同时根据角度偏差协调转速控制,从而抑制输出电压振荡现象。最后,利用Matlab/Simulink软件搭建牵引供电系统进行仿真验证,在合环场景下将S-DRPST柔性投入牵引网,仅a相供电臂带负载的情况下,电压不平衡度从4.81%降低到了0.05%,在计及供电臂制动状态时不同工况的不平衡电压均被控制在0.1%以下,在牵引负载快速连续变化下S-DRPST能及时响应补偿负序电流,结果表明S-DRPST在高速铁路供电系统中具有良好的负序补偿效果。 展开更多
关键词 高速铁路供电系统 单相双旋转移相变压器 负序电流补偿 移相角控制
下载PDF
基于改进可微分域转换的双域锥束计算机断层扫描重建网络用于锥角伪影校正 被引量:1
18
作者 彭声旺 王永波 +2 位作者 边兆英 马建华 黄静 《南方医科大学学报》 CAS CSCD 北大核心 2024年第6期1188-1197,共10页
目的 提出一种基于改进可微分域转换的双域锥束计算机断层扫描(CBCT)重建框架DualCBR-Net用于锥角伪影校正。方法 所提出的双域CBCT重建框架DualCBR-Net包含3个模块:投影域预处理、可微分域转换和图像后处理。投影域预处理模块首先对投... 目的 提出一种基于改进可微分域转换的双域锥束计算机断层扫描(CBCT)重建框架DualCBR-Net用于锥角伪影校正。方法 所提出的双域CBCT重建框架DualCBR-Net包含3个模块:投影域预处理、可微分域转换和图像后处理。投影域预处理模块首先对投影数据进行排方向扩充,使被扫描物体能够被X射线完全覆盖。可微分域转换模块引入重建和前投影算子去完成双域网络的前向和梯度回传过程,其中几何参数对应扩大的数据维度,扩大几何在网络前向过程中提供了重要先验信息,在反向过程中保证了回传梯度的精度,使得锥角区域的数据学习更为精准。图像域后处理模块对域转换后的图像进一步微调以去除残留伪影和噪声。结果 在Mayo公开的胸部数据集上进行的验证实验结果显示,本研究提出的DualCBR-Net在伪影去除和结构细节保持方面均优于其他竞争方法;定量上,这种DualCBR-Net方法在PSNR和SSIM上相对于最新方法分别提高了0.6479和0.0074。结论 本研究提出的基于改进可微分域转换的双域CBCT重建框架DualCBR-Net用于锥角伪影校正方法使有效联合训练CBCT双域网络成为可能,尤其是对于大锥角区域。 展开更多
关键词 CBCT 锥角伪影 可微分域转换
下载PDF
基于莫尔条纹的全周转角精密测量方法
19
作者 许令鸿 张秋坤 +3 位作者 林杰文 李劲林 黎昕婷 钟舜聪 《应用光学》 CAS 北大核心 2024年第3期644-651,共8页
由于将莫尔条纹图进行快速傅里叶变换时会导致频谱泄露,导致无法实现360°的全周精确测量,因此提出基于莫尔条纹的全周转角测量方法并搭建转角测量系统。以1°为步距,利用CMOS相机采集不同宽度的莫尔条纹图像,采用快速傅里叶变... 由于将莫尔条纹图进行快速傅里叶变换时会导致频谱泄露,导致无法实现360°的全周精确测量,因此提出基于莫尔条纹的全周转角测量方法并搭建转角测量系统。以1°为步距,利用CMOS相机采集不同宽度的莫尔条纹图像,采用快速傅里叶变换(fast Fourier transform,FFT)对条纹进行处理,得到光栅频谱信息。同时采用汉宁窗能量重心校正算法(Hanning-window energy centrobaric method,HnWECM)校正频谱,得到莫尔条纹图像表征转角的真实有效信息,实现全周精确测量。实验结果表明,该系统可快速精准地实现转角的全周测量,测量范围广,最大误差率为0.2433%。 展开更多
关键词 转角测量 莫尔条纹 快速傅里叶变换 汉宁窗能量重心法
下载PDF
基于模板匹配的接缝宽度变化测量方法
20
作者 杨程翔 丁勇 李登华 《激光杂志》 CAS 北大核心 2024年第2期72-77,共6页
为了解决传统接缝宽度变化测量算法在倾斜条件下拍摄出来的图像检测结果精度不足的问题,提出一种适应倾斜拍摄条件下的接缝宽度变化测量算法。分别采用三角形以及正方形靶标作为左右模板。首先选取合适大小的模板并通过模板匹配对拍摄... 为了解决传统接缝宽度变化测量算法在倾斜条件下拍摄出来的图像检测结果精度不足的问题,提出一种适应倾斜拍摄条件下的接缝宽度变化测量算法。分别采用三角形以及正方形靶标作为左右模板。首先选取合适大小的模板并通过模板匹配对拍摄图像进行匹配,然后获取左右模板并对其进行二值化处理,以获得左右两个模板的角点,利用交比不变性获得靶标的距离,以得到接缝的宽度变化。经过试验证明,该方法适用于远距离、倾斜拍摄下的接缝宽度变化测量,测量精度在0.2 mm以内,检测时间小于10 s,且减少了接缝宽度变化监测的成本,为工程应用提供了一定的价值。 展开更多
关键词 接缝宽度 模板匹配 图像处理 射影变换
下载PDF
上一页 1 2 46 下一页 到第
使用帮助 返回顶部