The preparation of granulated adsorption material of water-quenched slag/rectorite composite and the treatment of Cu （ Ⅱ ）-containing copper smelter wastewater with the adsorption material were studied. The experim...The preparation of granulated adsorption material of water-quenched slag/rectorite composite and the treatment of Cu （ Ⅱ ）-containing copper smelter wastewater with the adsorption material were studied. The experimental results showed that under the conditions with the mass ratio of water-quenched slag to rectorite of 1：1, 10% additive of industrial starch （IS）, and 50% water, and a calcination temperature of 400 ℃, the granulated adsorption material prepared had a density of 1.06 kg/m^3, a porosity of 62.29%, water absorption rate of 58.82%, and compressive strength of 2.22 MPa. The efficiency of wastewater treatment was the best, whereas the rate of spallation loss was low. Under the conditions of natural pH, with the addition of the granulated adsorption material of 0.05 g/mL, a reaction time of 40 minutes, and temperature of 25 ℃, the efficiency of the granulated adsorption material for the removal of Cu （ Ⅱ ） ions from the copper smelter wastewater attained 98.2%, and the quality indexes of the wastewater after treatment conformed with the first level of integrated wastewater discharge standard （GB8978-1996）. The reclamation of the used granulated adsorption material was carried out by de-sorption of the Cu （ Ⅱ） ions from the surface with 1 mol/L sodium chloride solution. The de-sorption rate was 96.4%, and the adsorption material can be reused many times to treat copper smelter wastewater.展开更多
A new solution called component modification in-process was introduced to the difficult grinding of air quenching steel slag by a series of experiments. The results show that the fly ash added into the molten steel sl...A new solution called component modification in-process was introduced to the difficult grinding of air quenching steel slag by a series of experiments. The results show that the fly ash added into the molten steel slag before air quenching can more effectively improve the slag's grindability than milltailings, which is the other modification agent tested under the same conditions. The role of fly ash is strengthened as its proportion increases, although the degree of promotion is gradually reduced. As a result of the reaction between fly ash and steel slag at high temperature, some new mineral phases and vitreous bodies with fine grindability promote the slag grinding easily. This work is helpful to making a comprehensive utilization of steel slag and maximize its economic efficiency in China.展开更多
The relationships between microstructure and melting temperature of slag containing different heavy metals （Zn, Cu, Pb and Cr） were studied. Furthermore, the corresponding solidification mechanism and rule of heavy ...The relationships between microstructure and melting temperature of slag containing different heavy metals （Zn, Cu, Pb and Cr） were studied. Furthermore, the corresponding solidification mechanism and rule of heavy metals were analyzed by microscopic tests during melting and reconstructing process. Based on preliminary results, three conclusions were derived. Firstly, pure slag would begin to melt when the temperature reached 1 180℃; however, Zn did not play any fluxing action. Secondly, upon adding Cu and Pb, the initial melting temperature of slag decreased by 5-8℃ and their fluxing effect was observed. Thirdly, the initial melting temperature and the reaction time for slag decreased by 22℃ and 6 s respectively after adding Cr; the fluxing action was significant under Cr. The results of X-ray diffraction （XRD） and Fourier transform infrared spectroscope （FTIR） analyses showed that the above heavy metals had little influence on the reconstruction of slag. Toxicity characteristic leaching procedure （TCLP） leaching tests showed a good solidification effect of the heavy metals with melting slag, fixation rate of Zn, Cu, Pb and Cr was 36.3%, 24.6%, 9.2% and 93.2%, respectively. The leaching toxicity of the heavy metals met the requirements for environmental emission after solidification treatment.展开更多
基金National"973"Plan Research Project(No.2004CB619204)Educational Ministry Scientific and Technological Research Key Project(No.02052)
文摘The preparation of granulated adsorption material of water-quenched slag/rectorite composite and the treatment of Cu （ Ⅱ ）-containing copper smelter wastewater with the adsorption material were studied. The experimental results showed that under the conditions with the mass ratio of water-quenched slag to rectorite of 1：1, 10% additive of industrial starch （IS）, and 50% water, and a calcination temperature of 400 ℃, the granulated adsorption material prepared had a density of 1.06 kg/m^3, a porosity of 62.29%, water absorption rate of 58.82%, and compressive strength of 2.22 MPa. The efficiency of wastewater treatment was the best, whereas the rate of spallation loss was low. Under the conditions of natural pH, with the addition of the granulated adsorption material of 0.05 g/mL, a reaction time of 40 minutes, and temperature of 25 ℃, the efficiency of the granulated adsorption material for the removal of Cu （ Ⅱ ） ions from the copper smelter wastewater attained 98.2%, and the quality indexes of the wastewater after treatment conformed with the first level of integrated wastewater discharge standard （GB8978-1996）. The reclamation of the used granulated adsorption material was carried out by de-sorption of the Cu （ Ⅱ） ions from the surface with 1 mol/L sodium chloride solution. The de-sorption rate was 96.4%, and the adsorption material can be reused many times to treat copper smelter wastewater.
基金Project(IRT0708) supported by Program for Changjiang Scholars and Innovative Research Team in University of China ("PCSIRT")Project(20070008031) supported by the Research Fund for the Dectoral Program of Higher Education of China
文摘A new solution called component modification in-process was introduced to the difficult grinding of air quenching steel slag by a series of experiments. The results show that the fly ash added into the molten steel slag before air quenching can more effectively improve the slag's grindability than milltailings, which is the other modification agent tested under the same conditions. The role of fly ash is strengthened as its proportion increases, although the degree of promotion is gradually reduced. As a result of the reaction between fly ash and steel slag at high temperature, some new mineral phases and vitreous bodies with fine grindability promote the slag grinding easily. This work is helpful to making a comprehensive utilization of steel slag and maximize its economic efficiency in China.
基金Funded by the National Natural Science Foundation of China(Nos.51202222,51002110)the State Key Laboratory of Silicate Materials for Architectures(Wuhan University of Technology)(No.SYSJJ2013-07)
文摘The relationships between microstructure and melting temperature of slag containing different heavy metals （Zn, Cu, Pb and Cr） were studied. Furthermore, the corresponding solidification mechanism and rule of heavy metals were analyzed by microscopic tests during melting and reconstructing process. Based on preliminary results, three conclusions were derived. Firstly, pure slag would begin to melt when the temperature reached 1 180℃; however, Zn did not play any fluxing action. Secondly, upon adding Cu and Pb, the initial melting temperature of slag decreased by 5-8℃ and their fluxing effect was observed. Thirdly, the initial melting temperature and the reaction time for slag decreased by 22℃ and 6 s respectively after adding Cr; the fluxing action was significant under Cr. The results of X-ray diffraction （XRD） and Fourier transform infrared spectroscope （FTIR） analyses showed that the above heavy metals had little influence on the reconstruction of slag. Toxicity characteristic leaching procedure （TCLP） leaching tests showed a good solidification effect of the heavy metals with melting slag, fixation rate of Zn, Cu, Pb and Cr was 36.3%, 24.6%, 9.2% and 93.2%, respectively. The leaching toxicity of the heavy metals met the requirements for environmental emission after solidification treatment.
