Dynamical nonlinear excitations induced by interaction quench in a two-dimensional box-trapped Bose-Einstein condensate

Manipulating nonlinear excitations,including solitons and vortices,is an essential topic in quantum many-body physics.A new progress in this direction is a protocol proposed in[Phys.Rev.Res.2043256(2020)]to produce dark solitons in a one-dimensional atomic Bose–Einstein condensate(BEC)by quenching inter-atomic interaction.Motivated by this work,we generalize the protocol to a two-dimensional BEC and investigate the generic scenario of its post-quench dynamics.For an isotropic disk trap with a hard-wall boundary,we find that successive inward-moving ring dark solitons(RDSs)can be induced from the edge,and the number of RDSs can be controlled by tuning the ratio of the after-and before-quench interaction strength across different critical values.The role of the quench played on the profiles of the density,phase,and sound velocity is also investigated.Due to the snake instability,the RDSs then become vortex–antivortex pairs with peculiar dynamics managed by the initial density and the after-quench interaction.By tuning the geometry of the box traps,demonstrated as polygonal ones,more subtle dynamics of solitons and vortices are enabled.Our proposed protocol and the discovered rich dynamical effects on nonlinear excitations can be realized in near future cold-atom experiments.

Phase diagram and quench dynamics of a periodically drivenHaldane model

We investigate a periodically driven Haldane model subjected to a two-stage driving scheme in the form of a step function.By using the Floquet theory,we obtain the topological phase diagram of the system.We also find that anomalous Floquet topological phases exist in the system.Focusing on examining the quench dynamics among topological phases,we analyze the site distribution of the 0-mode and p-mode edge states in long-period evolution after a quench.The results demonstrate that,under certain conditions,the site distribution of the 0-mode can be confined at the edge even in long-period evolution.Additionally,both the 0-mode and p-mode can recover and become confined at the edge in long-period evolution when the post-quench parameters(T,M_(2) /M_(1))in the phase diagram cross away from the phase boundary (M_(2)/ M_(1))=(6√3t2)/ M_(1)−1.Furthermore,we conclude that whether the edge state is confined at the edge in the long-period evolution after a quench depends on the similarity of the edge states before and after the quench.Our findings reveal some new characteristics of quench dynamics in a periodically driven system.

Neutron irradiation influence on high-power thyristor device under fusion environment

Because of their economy and applicability,high-power thyristor devices are widely used in the power supply systems for large fusion devices.When high-dose neutrons produced by deuterium–tritium(D–T)fusion reactions are irradiated on a thyristor device for a long time,the electrical characteristics of the device change,which may eventually cause irreversible damage.In this study,with the thyristor switch of the commutation circuit in the quench protection system(QPS)of a fusion device as the study object,the relationship between the internal physical structure and external electrical parameters of the irradiated thyristor is established.Subsequently,a series of targeted thyristor physical simulations and neutron irradiation experiments are conducted to verify the accuracy of the theoretical analysis.In addition,the effect of irradiated thyristor electrical characteristic changes on the entire QPS is studied by accurate simulation,providing valuable guidelines for the maintenance and renovation of the QPS.

Femtosecond laser ultrafast photothermal exsolution

Exsolution,as an effective approach to constructing particle-decorated interfaces,is still challenging to yield interfacial films rather than isolated particles.Inspired by in vivo near-infrared laser photothermal therapy,using 3 mol%Y_(2)O_(3)stabilized tetragonal zirconia polycrystals(3Y-TZP)as host oxide matrix and iron-oxide(Fe3O4/γ-Fe_(2)O_(3)/α-Fe_(2)O_(3))materials as photothermal modulator and exsolution resource,femtosecond laser ultrafast exsolution approach is presented enabling to conquer this challenge.The key is to trigger photothermal annealing behavior via femtosecond laser ablation to initialize phase transition from monoclinic zirconia(m-ZrO_(2))to tetragonal zirconia(t-ZrO_(2))and induce t-ZrO_(2)columnar crystal growth.Fe-ions rapidly segregate along grain boundaries and diffuse towards the outmost surface,and become‘frozen’,highlighting the potential to use photothermal materials and ultrafast heating/quenching behaviors of femtosecond laser ablation for interfacial exsolution.Triggering interfacial iron-oxide coloring exsolution is composition and concentration dependent.Photothermal materials themselves and corresponding photothermal transition capacity play a crucial role,initializing at 2 wt%,3 wt%,and 5 wt%for Fe3O4/γ-Fe_(2)O_(3)/α-Fe_(2)O_(3)doped 3Y-TZP samples.Due to different photothermal effects,exsolution states of ablated 5 wt%Fe_(3)O_(4)/γ-Fe_(2)O_(3)/α-Fe_(2)O_(3)-doped 3Y-TZP samples are totally different,with whole coverage,exhaustion(ablated away)and partial exsolution(rich in the grain boundaries in subsurface),respectively.Femtosecond laser ultrafast photothermal exsolution is uniquely featured by up to now the deepest microscale(10μm from 5 wt%-Fe_(3)O_(4)-3Y-TZP sample)Fe-elemental deficient layer for exsolution and the whole coverage of exsolved materials rather than the formation of isolated exsolved particles by other methods.It is believed that this novel exsolution method may pave a good way to modulate interfacial properties for extensive applications in the fields of biology,optics/photonics,energy,catalysis,environment,etc.

A simple route for preparation of TRIP-assisted Si-Mn steel with excellent performance using direct strip casting

The complex producing procedures and high energy-consuming limit the large-scale production and application of advanced high-strength steels(AHSSs).In this study,the direct strip casting(DSC)technology with unique sub-rapid solidification characteristics and cost advantages was applied to the production of low-alloy Si-Mn steel with the help of quenching&partitioning(Q&P)concept to address these issues.Compared this method with the conventional compact strip production(CSP)process,the initial microstructure formed under different solidification conditions and the influence of heat treatment processes on the final mechanical properties were in-vestigated.The results show that the initial structure of the DSC sample is a dual-phase structure composed of fine lath martensite and bainite,while the initial structure of the CSP sample consists of pearlite and ferrite.The volume fraction and carbon content of retained austenite(RA)in DSC samples are usually higher than those in CSP samples after the same Q&P treatment.DSC samples typically demonstrate better comprehensive mechanical properties than the CSP sample.The DSC sample partitioned at 300℃ for 300 s(DSC-Pt300)achieves the best comprehensive mechanical properties,with yield strength(YS)of 1282 MPa,ultimate tensile strength(UTS)of 1501 MPa,total elongation(TE)of 21.5%,and product of strength and elongation(PSE)as high as 32.3 GPa·%.These results indicate that the excellent mechanical properties in low-alloy Si-Mn steel can be obtained through a simple process(DSC-Q&P),which also demonstrates the superiority of DSC technology in manufacturing AHSSs.

Transverse momentum balance of dijets in Xe+Xe collisions at the LHC

We present a theoretical study of the medium modifications of the p_(T)balance (x_(J)) of dijets in Xe+Xe collisions at■.The initial production of dijets was carried out using the POWHEG+PYTHIA8 prescription,which matches the next-toleading-order (NLO) QCD matrix elements with the parton shower (PS) effect.The SHELL model described the in-medium evolution of nucleus–nucleus collisions using a transport approach.The theoretical results of the dijet xJin the Xe+Xe collisions exhibit more imbalanced distributions than those in the p+p collisions,consistent with recently reported ATLAS data.By utilizing the Interleaved Flavor Neutralisation,an infrared-and-collinear-safe jet flavor algorithm,to identify the flavor of the reconstructed jets,we classify dijets processes into three categories:gluon–gluon (gg),quark–gluon (qg),and quark–quark (qq),and investigated the respective medium modification patterns and fraction changes of the gg,qg,and qq components of the dijet sample in Xe+Xe collisions.It is shown that the increased fraction of qg component at a small x_(J)contributes to the imbalance of the dijet;in particular,the q_(1)g_(2)(quark-jet-leading) dijets experience more significant asymmetric energy loss than the g_(1)q_(2)(gluon-jet-leading) dijets traversing the QGP.By comparing the■of inclusive,■ dijets in Xe+Xe collisions,we observe■.Moreover,ρ_(Xe),P_(b),the ratios of the nuclear modification factors of dijets in Xe+Xe to those in Pb+Pb,were calculated,which indicates that the yield suppression of dijets in Pb+Pb is more pronounced than that in Xe+Xe owing to the larger radius of the lead nucleus.

The medium-temperature dependence of jet transport coefficient in high-energy nucleus-nucleus collisions

The medium-temperature T dependence of the jet transport coefficient̂q was studied via the nuclear modification factor RAA(p_(T))and elliptical flow parameter v_(2)(p_(T))for large transverse momentum p_(T) hadrons in high-energy nucleus-nucleus collisions.Within a next-to-leading-order perturbative QCD parton model for hard scatterings with modified fragmentation functions due to jet quenching controlled by q,we check the suppression and azimuthal anisotropy for large p_(T) hadrons,and extract q by global fits to RAA(pT)and v_(2)(pT)data in A+A collisions at RHIC and LHC,respectively.The numerical results from the best fits show that q∕T^(3) goes down with local medium-temperature T in the parton jet trajectory.Compared with the case of a constant q∕T^(3),the going-down T dependence of q∕T^(3) makes a hard parton jet to lose more energy near T_(c) and therefore strengthens the azimuthal anisotropy for large pT hadrons.As a result,v_(2)(p_(T))for large pT hadrons was enhanced by approximately 10%to better fit the data at RHIC/LHC.Considering the first-order phase transition from QGP to the hadron phase and the additional energy loss in the hadron phase,v_(2)(p_(T))is again enhanced by 5-10%at RHIC/LHC.

Credible and Facile Fluorometric Detection of Soybean Trypsin Inhibitor Activity with a Water-Soluble Poly(diphenylacetylene) Derivative

Herein,a novel method for fl uorometric detection of soybean trypsin inhibitor(SBTI)activity based on a water-soluble poly(diphenylacetylene)derivative was reported.Fluorescence quenching of the polymer via p-nitroaniline,produced from the trypsin-catalyzed decomposition of N-benzoyl-DL-arginine-4-nitroanilide hydrochloride(L-BAPA),was well described using the Stern-Volmer equation.SBTI activity was quantitatively assessed based on changes in the fl uorescence intensity of the polymer.This strategy has several advantages,such as high sensitivity and ease of operation.Moreover,its applicability to other biochemical analyses is promising.

Highly efficient organic light-emitting diodes and light-emitting electrochemical cells employing multiresonant thermally activated delayed fluorescent emitters with bulky donor or acceptor peripheral groups

Multiresonant thermally activated delayedfluorescence(MR-TADF)emitters have been the focus of extensive design efforts as they are recognized to show bright,narrowband emission,which makes them very appealing for display applications.However,the planar geometry and relatively large singlet–triplet energy gap lead to,respectively,severe aggregation-caused quenching(ACQ)and slow reverse intersys-tem crossing(RISC).Here,a design strategy is proposed to address both issues.Two MR-TADF emitters triphenylphosphine oxide(TPPO)-tBu-DiKTa and tripheny-lamine(TPA)-tBu-DiKTa have been synthesized.Twisted ortho-substituted groups help increase the intermolecular distance and largely suppress the ACQ.In addition,the contributions from intermolecular charge transfer states in the case of TPA-tBu-DiKTa help to accelerate RISC.The organic light-emitting diodes(OLEDs)with TPPO-tBu-DiKTa and TPA-tBu-DiKTa exhibit high maximum external quan-tum efficiencies(EQEmax)of 24.4%and 31.0%,respectively.Notably,the device with 25 wt%TPA-tBu-DiKTa showed both high EQEmax of 28.0%and reduced efficiency roll-off(19.9%EQE at 1000 cd m^(-2))compared to the device with 5 wt%emitter(31.0%EQEmax and 11.0%EQE at 1000 cd m^(-2)).The new emitters were also introduced into single-layer light-emitting electrochemical cells(LECs),equipped with air-stable electrodes.The LEC containing TPA-tBu-DiKTa dispersed at 0.5 wt%in a matrix comprising a mobility-balanced blend-host and an ionic liq-uid electrolyte delivered blue luminance with an EQEmax of 2.6%at 425 cd m^(-2).The high efficiencies of the OLEDs and LECs with TPA-tBu-DiKTa illustrate the potential for improving device performance when the DiKTa core is decorated with twisted bulky donors.

C─H···πinteraction induced H-aggregates for wide range water content detection in organic solvents

J-aggregation and H-aggregation are identified as two classical models of function-ally oriented non-covalent interactions,and significant attention has been drawn by researchers.However,due to the scarcity of single-crystal examples of H-aggregation,a comprehensive understanding of the relationship between its stacking mode and optical behaviour has been hindered.In recent studies,two polyaromatic Schiff base compounds,Cl-Salmphen and H-Salmphen,were successfully synthe-sized,and both were found to exhibit H-aggregation.In thefindings,H-Salmphen was shown to display typical C─H···πinteractions,characteristic of Aggregation-Induced Emission(AIE)active molecules,whereas its halogenated counterpart was identified as behaving similar to Aggregation-Caused Quenching(ACQ)active molecules.These types of results suggest that identical intermolecular interactions can produce differing optical behaviours.Light was shed,at least in part,on the for-mation mechanisms of H-type aggregates and their luminescence properties from these observations.Additionally,the high optical signal-to-noise ratio inherent to H-aggregates was utilized for the exploration of water content detection.As an outcome,a high-performancefluorescentfilter paper was developed,enabling easy real-time detection using a smartphone.

An Experimental Artificial Neural Network Model:Investigating and Predicting Effects of Quenching Process on Residual Stresses of AISI 1035 Steel Alloy

The present study establishes a new estimation model using an artificial neural network(ANN) to predict the mechanical properties of the AISI 1035 alloy.The experiments were designed based on the L16 orthogonal array of the Taguchi method.A proposed numerical model for predicting the correlation of mechanical properties was supplemented with experimental data.The quenching process was conducted using a cooling medium called “nanofluids”.Nanoparticles were dissolved in a liquid phase at various concentrations(0.5%,1%,2.5%,and 5% vf) to prepare the nanofluids.Experimental investigations were done to assess the impact of temperature,base fluid,volume fraction,and soaking time on the mechanical properties.The outcomes showed that all conditions led to a noticeable improvement in the alloy's hardness which reached 100%,the grain size was refined about 80%,and unwanted residual stresses were removed from 50 to 150 MPa.Adding 5% of CuO nanoparticles to oil led to the best grain size refinement,while adding 2.5% of Al_(2)O_(3) nanoparticles to engine oil resulted in the greatest compressive residual stress.The experimental variables were used as the input data for the established numerical ANN model,and the mechanical properties were the output.Upwards of 99% of the training network's correlations seemed to be positive.The estimated result,nevertheless,matched the experimental dataset exactly.Thus,the ANN model is an effective tool for reflecting the effects of quenching conditions on the mechanical properties of AISI 1035.

Gauge dependence of chiral condensate and fermion mass by an unquenched model

Based on three-dimensional quantum electrodynamics theory,a set of truncated Dyson-Schwinger（D-S） equations are solved to study photon and fermion propagators with the effect of vacuum polarization.Numerical studies show that condensation and the value of fermion mass depends heavily on how the D-S equations are truncated.By solving a set of coupled D-S equations,it is also found that the fermion propagator shows a clear dependence on the order parameter.The truncated D-S equations under unquenched approximation are used to study the mass-function and chiral condensation of the fermions.The results under the unquenched approximation are clearly different from the ones under quenched approximation.With the increase in the order parameter,the fermion condensation in the unquenched approximation decreases when 0≤ξ5,while it increases when ξ5.However,nothing like this is observed in the quenched approximation,which indicates that there may be flaws in the quenched approximations.

Critical current degradation in an epoxy-impregnated rare-earth Ba_(2)Cu_(3)O_(7-x)coated conductor caused by damage during a quench

High-temperature superconducting(HTS)rare-earth Ba_(2)Cu_(3)O_(7-x)(REBCO)coated conductors(CCs)have significant potential in high-current and high-field applications.However,owing to the weak interface strength of the laminated composite REBCO CCs,the damage induced by the thermal mismatch stress under a combination of epoxy impregnation,cooling,and quenching can cause premature degradation of the critical current.In this study,a three-dimensional(3D)electromagnetic-thermal-mechanical model based on the H-formulation and cohesive zone model(CZM)is developed to study the critical current degradation characteristics in an epoxy-impregnated REBCO CC caused by the damage during a quench.The temperature variation,critical current degradation of the REBCO CC,and its degradation onset temperature calculated by the numerical model are in agreement with the experimental data taken from the literature.The delamination of the REBCO CC predicted by the numerical model is consistent with the experimental result.The numerical results also indicate that the shear stress is the main contributor to the damage propagation inside the REBCO CC.The premature degradation of the critical current during a quench is closely related to the interface shear strength inside the REBCO CC.Finally,the effects of the coefficient of thermal expansion(CTE)of the epoxy resin,thickness of the substrate,and substrate material on the critical current degradation characteristics of the epoxy-impregnated REBCO CC during a quench are also discussed.These results help us understand the relationship between the current-carrying degradation and damage in the HTS applications.

Analysis of Quenching Resistor Effect to Improve Stability of TIA Circuit for APD-A Secondary Publication

In this paper,since the Avalanche Photo Diode(APD)for Light-to-Voltage LTV conversion uses a high voltage in the operating range unlike other Photo Diodes(PD),the quenching resistor must be connected in series to prevent overcurrent when using the Transimpedance Amplifier(TIA).In such a case,quenching resistance may affect the transfer function of the TIA circuit,resulting in serious stability.Therefore,in this paper,by analyzing the effect of APD quenching resistance on the voltage and current loop transfer function of TIA,we proposed a loop analysis and a method for determining the quenching resistance value to improve stability.A TIA circuit with quenching resistance was designed by the proposed method and its operational stability was verified through simulation and chip fabrication.

Discussion on the Free Quenching Heat Treatment Process of Automotive Leaf Springs

Free quenching of automotive leaf springs is a new technology that has gradually started to be applied in the industry in China in recent years.Only a few manufacturers are applying it in the industry.Through more than half a year of on-site practice,the changes in the hot forming of spring plates before free quenching have been explored,and finally a heat treatment process that meets the production requirements of our company has been developed,achieving normal production.

Gaseous and Electrochemical Hydrogen Storage Kinetics of As-quenched Nanocrystalline and Amorphous Mg_2Ni-type Alloys

The nanocrystalline and amorphous Mg2Ni-type Mg2Ni1-xCox （x = 0, 0.1, 0.2, 0.3, 0.4） alloys were synthesized by melt quenching technology. The structures of the as-cast and quenched alloys were characterized by XRD, SEM and HRTEM. The gaseous hydrogen storage kinetics of the alloys was measured using an automatically controlled Sieverts apparatus. The alloy electrodes were charged and discharged with a constant current density in order to investigate the electrochemical hydrogen storage kinetics of the alloys. The results demonstrate that the substitution of Co for Ni results in the formation of secondary phases MgCo2 and Mg instead of altering the major phase Mg2Ni. No amorphous phase is detected in the as-quenched Co- ffee alloy, however, a certain amount of amorphous phase is clearly found in the as-quenched alloys substituted by Co. Furthermore, both the rapid quenching and the Co substitution significantly improve the gaseous and electrochemical hydrogen storage kinetics of the alloys, for which the notable increase of the hydrogen diffusion coefficient （D） along with the limiting current density （IL） and the obvious decline of the electrochemical impedance generated by both the Co substitution and the rapid quenching are basically responsible.

Eigenstate Distribution Fluctuation of a Quenched Disordered Bose–Hubbard System in Thermal-to-Localized Transitions

We study the thermalization of a quenched disordered Bose–Hubbard system. By considering the eigenstate distribution fluctuation, we show that the thermal to many-body localized transition is always connected to a minimum of this distribution fluctuation. We also observe a Mott-localized regime, where the system fails to thermalize due to the strong on-site repulsion. Lastly, we show how to detect this eigenstate distribution fluctuation in a cold atom system, which is equivalent to measure the Loschmidt echo of the system. Our work suggests a way to measure the thermal-to-localized transitions in experiments, especially for a large system.

Study on the resistance spot welding technology of 22MnMoB hot stamping quenched steel

In this paper, the spot welding technology of a new kind of 22MnMoB hot stamping quenched steel sheet was systematically studied by power frequency spot welder. Through a series of technology and test experiments, we have obtained the optimal spot welding technological parameter condition. According to the results, the relations among spot welding technological parameter, welding nugget, mechanical property and fracture mode were discussed. The effects of all the welding parameters such as welding current, welding time and electrode force on the quality of joint can be boiled down to one thing--the diameter of welding nugget. The experimental results showed that welding nugget diameter determines the mechanical property of spot welding joint and the relation between welding nugget diameter and the mechanical property of joint presents a kind of linear mathematic representation. There are two typical fracture models of 22MnMoB hot stamping quenched steel sheet, i.e., interracial fracture and nugget pullout. Other than mild steel or normal high strength steel, in the shearing tensile test, hot stamping quenched steel has a great tendency to fail in interfacial mode due to the effects of high strength matrix structure, welding soft zone and the porosity level of fusion zone.

SUPERPLASTICITY OF A WATER-QUENCHED AND TEMPERED 40Cr STEEL

The superplastic deformation characteristics, of commercial 40Cr (i.e., 5140) steel that was water-quenched only 1 times and subsequent high-temperature tempered, were investigated. The results showed that the 40Cr steel has a fine grain of 10-15μm at room temperature, and exhibits a tensile elongation of 304%, a true flow stress of 89.3MPa and a strain rate sensitivity m-value of 0.227 at the initial strain rate of 1.0×10-3s-1and at the temperature of 750°C. The final fracture is caused by the development of neck. The experimental result of elongation is in good agreement with the theoretically predicated value according to the analytical expression (where ef, m, f, nv and ε is respectively elongation, average strain rate sensitivity, initial geometric defect, average strain hardening sensitivity at constant deformation velocity and average true strain). The fracture surface is intergraular, and superplastic deformation induces an equiaxed and grown grain. Decreasing strain rate increases tensile elongation and strain rate sensitivity m-value. The primary superplastic deformation mechanism is thought to be atom-diffusion-controlled grain boundary sliding.

Crystallization behavior of Zr_(52) Cu_(18) Ni_(15) Al_(10) Ti_5 bulk glass with quenched-in crystals

Zr 52 Cu 18 Ni 15 Al 10 Ti 5 bulk glass samples with a diameter of 8 mm prepared by copper mold with water cooling have a mixing structure of amorphous phase and quenched in crystals. By isothermal annealing at different temperatures, the crystallization process of the glass alloy is shown to be a multi staged crystallization reaction as follows: Am+quenched in crystals→Am′+cellular phase+(Zr, Ti) Al→Am′+cellular phase+(Zr, Ti) Al+(Zr, Ti) 2(Cu, Ni). Morphology of the quenched in crystals changes from dot or dendritic phase in the as cast bulk glass to cellular phase at different annealing states. The residual region surrounded by the cellular phase has a mixing structure of nano scale phase and amorphous phase.