O2（1△g） Deactivation on O2-adsorbed Metal Surfaces

A flow system was set up to measure the quenching probability ~ of O2（1△g） on various O2- adsorbed metal surfaces including Cu, Cr, Ni, and Ag. increased with both the duration of the experiment and the O2（1△g） concentration. After several hours evacuation to a few Pa, γ can return to its original value. A deactivation mechanism of O2（1△g） is suggested by considering first the weak chemisorption of O2（1△g） on the surface adsorption sites, followed by the near resonant energy transfer between the gas phase O2（1△g） and surface O2（1△g）. A phenomenological model in accord with the experimental fact has been proposed together with relevant kinetic equations.

Volume and surface effects on two-photonic and three-photonic processes in dry co-doped upconversion nanocrystals

Despite considerable advances in synthesizing high-quality core/shell upconversion(UC)nanocrystals(NC;UCNC)and UCNC photophysics,the application of near-infrared(NIR)-excitable lanthanide-doped UCNC in the life and material sciences is still hampered by the relatively low upconversion luminescence(UCL)of UCNC of small size or thin protecting shell.To obtain deeper insights into energy transfer and surface quenching processes involving Yb^(3+) and Er^(3+) ions,we examined energy loss processes in differently sized solid core NaYF_(4) nanocrystals doped with either Yb^(3+)(YbNC;20%Yb^(3+))or Er^(3+)(ErNC;2%Er^(3+))and co-doped with Yb^(3+) and Er^(3+)(YbErNC;20%Yb^(3+) and 2%Er^(3+))without a surface protection shell and coated with a thin and a thick NaYF_(4) shell in comparison to single and co-doped bulk materials.Luminescence studies at 375 nm excitation demonstrate back-energy transfer(BET)from the ^(4)G_(11/2) state of Er^(3+) to the ^(2)F_(5/2) state of Yb^(3+),through which the red Er^(3+) ^(4)F_(9/2) state is efficiently populated.Excitation power density(P)-dependent steady state and time-resolved photoluminescence measurements at different excitation and emission wavelengths enable to separate surface-related and volume-related effects for two-photonic and three-photonic processes involved in UCL and indicate a different influence of surface passivation on the green and red Er3+emission.The intensity and lifetime of the latter respond particularly to an increase in volume of the active UCNC core.We provide a three-dimensional random walk model to describe these effects that can be used in the future to predict the UCL behavior of UCNC.

Influence of varying forms of bionic units on repairing remaining quenching surface of gray cast iron

In order to repair and reuse remaining quenching surface(RQS)divided into severely worn surface(SWun-S)and mildly worn surface(MWun-S)of abandoned gray cast iron guide rail,inspired by the bionic theory,varying forms of bionic units such as spot(Sp-S),striation(St-S),and reticulation(Re-S)were fabricated on RQS of gray cast iron through laser processing technology.Firstly,the microstructure,phase composition,and microhardness of bionic units and RQS were analyzed by optical microscopy as well as X-ray diffraction instrument and scanning electron microscopy,respectively.Secondly,the oil lubrication wear experiment was performed on homemade line reciprocating wear machine.The results demonstrated that the bionic units had a significant effect on improving wear resistance of RQS of abandoned guide rail due to the microstructure and higher hardness.In addition,the weight loss ratios of MWun-S,Sp-S,St-S,and Re-S samples were decreased by 36.72%,36.78%,62.26%,and 80.39%,respectively,compared with that of SWun-S sample.The mechanism of wear resistance enhancement was also discussed.