期刊文献+
共找到22篇文章
< 1 2 >
每页显示 20 50 100
Wideband radar cross-section reduction by a double-layer-plasma-based metasurface
1
作者 赵智明 李小平 +2 位作者 董果香 刘旭 牟相超 《Plasma Science and Technology》 SCIE EI CAS CSCD 2024年第6期159-168,共10页
Reduction of the radar cross-section(RCS) is the key to stealth technology. To improve the RCS reduction effect of the designed checkerboard metasurface and overcome the limitation of thinlayer plasma in RCS reduction... Reduction of the radar cross-section(RCS) is the key to stealth technology. To improve the RCS reduction effect of the designed checkerboard metasurface and overcome the limitation of thinlayer plasma in RCS reduction technology, a double-layer-plasma-based metasurface—composed of a checkerboard metasurface, a double-layer plasma and an air gap between them—was investigated. Based on the principle of backscattering cancellation, we designed a checkerboard metasurface composed of different artificial magnetic conductor units;the checkerboard metasurface can reflect vertically incident electromagnetic(EM) waves in four different inclined directions to reduce the RCS. Full-wave simulations confirm that the doublelayer-plasma-based metasurface can improve the RCS reduction effect of the metasurface and the plasma. This is because in a band lower than the working band of the metasurface, the RCS reduction effect is mainly improved by the plasma layer. In the working band of the metasurface,impedance mismatching between the air gap and first plasma layer and between first and second plasma layers cause the scattered waves to become more dispersed, so the propagation path of the EM waves in the plasma becomes longer, increasing the absorption of the EM waves by the plasma. Thus, the RCS reduction effect is enhanced. The double-layer-plasma-based metasurface can be insensitive to the polarization of the incoming EM waves, and can also maintain a satisfactory RCS reduction band when the incident waves are oblique. 展开更多
关键词 stealth technology radar cross-section(rcs)reduction backscattering cancellation double-layer-plasma-based metasurface
下载PDF
An ultra-wideband 2-bit coding metasurface using Pancharatnam–Berry phase for radar cross-section reduction
2
作者 林宝勤 黄文准 +3 位作者 吕林涛 郭建新 王衍文 叶红军 《Chinese Physics B》 SCIE EI CAS CSCD 2022年第3期269-275,共7页
An ultra-wideband 2-bit coding metasurface is designed for radar cross-section(RCS) reduction. The design process is presented in detail, in which a polarization conversion metasurface(PCM) is first proposed. The prop... An ultra-wideband 2-bit coding metasurface is designed for radar cross-section(RCS) reduction. The design process is presented in detail, in which a polarization conversion metasurface(PCM) is first proposed. The proposed PCM can realize ultra-wideband circular polarization(CP) maintaining reflection. Moreover, Pancharatnam–Berry(PB) phase will be generated in the co-polarized reflection coefficient by rotating the metallic patches in its unit cells. Thus, based on the PCM, the four coding elements of a 2-bit coding metasurface are constructed using PB phase, and an ultra-wideband PB 2-bit coding metasurface is proposed according to an appropriate coding sequence. The simulated and experimental results show that the coding metasurface has obvious advantages of wideband and polarization-insensitivity. Compared to a metallic plate of the same size, it can achieve more than 10 dB RCS reduction in the frequency band from 9.8 GHz to 42.6 GHz with a relative bandwidth of 125.2% under normal incidence with arbitrary polarizations. 展开更多
关键词 coding metasurface Pancharatnam–Berry phase radar cross-section(rcs)
下载PDF
一种基于三角面元的目标RCS实用计算方法 被引量:1
3
作者 黄纪军 粟毅 郁文贤 《国防科技大学学报》 EI CAS CSCD 北大核心 2004年第6期69-74,共6页
提出一种计算复杂目标高频区RCS的实用方法。首先采用3DStudioMax对装甲车进行三角面元模拟,然后运用路德维格积分[1]和物理绕射理论(PTD)计算目标的雷达散射截面积,通过对方柱RCS的计算,验证了所提方法的有效性,最后给出了C波段和X波... 提出一种计算复杂目标高频区RCS的实用方法。首先采用3DStudioMax对装甲车进行三角面元模拟,然后运用路德维格积分[1]和物理绕射理论(PTD)计算目标的雷达散射截面积,通过对方柱RCS的计算,验证了所提方法的有效性,最后给出了C波段和X波段不同极化的装甲车和坦克RCS的方位分布图。 展开更多
关键词 雷达散射截面积 三角面元 电磁计算
下载PDF
复杂飞行器RCS快速预估的方法
4
作者 刘春阳 焦永昌 +1 位作者 张朋 张福顺 《北京理工大学学报》 EI CAS CSCD 北大核心 2011年第3期353-357,共5页
对整机雷达散射截面(RCS)进行快速预估分析.将军用飞行器散射总场分成两部分进行估算,对于机体表面单元散射场贡献采用电磁场的高频模拟计算方法即物理光学算法(PO),对于机体外延及面相交部所形成的棱边绕射场贡献采用改进的等效电磁流(... 对整机雷达散射截面(RCS)进行快速预估分析.将军用飞行器散射总场分成两部分进行估算,对于机体表面单元散射场贡献采用电磁场的高频模拟计算方法即物理光学算法(PO),对于机体外延及面相交部所形成的棱边绕射场贡献采用改进的等效电磁流(IMEC)算法分析.为了验证该算法的有效性,完成了对两种飞行器目标模型RCS的模拟计算.模拟结果与暗室实测结果对比,表明该算法可以满足工程估算要求. 展开更多
关键词 隐身设计 雷达散射截面 物理光学 等效电磁流
下载PDF
基于PPO和MPI的腔体RCS计算
5
作者 张鹏飞 龚书喜 《电波科学学报》 EI CSCD 北大核心 2007年第6期932-936,共5页
改进了行进物理光学的终端反射计算,使计算过程更符合电磁波在腔体内部的实际传播过程。基于消息传递协议开发了针对电大尺寸开口腔体单站雷达截面(radar cross section,RCS)的行进物理光学并行计算程序。采用按照RCS计算角度间隔分配... 改进了行进物理光学的终端反射计算,使计算过程更符合电磁波在腔体内部的实际传播过程。基于消息传递协议开发了针对电大尺寸开口腔体单站雷达截面(radar cross section,RCS)的行进物理光学并行计算程序。采用按照RCS计算角度间隔分配计算任务的大粒度并行计算方法减小了通信开支,并且取得了较好的负载平衡。对飞机进气道模型的计算结果与测量结果吻合良好。计算所用时间显示了较高的并行效率。其计算速度相对迭代物理光学提高了一个量级。 展开更多
关键词 雷达截面 行进物理光学 并行计算
下载PDF
电大尺寸开口腔体RCS的SBR并行计算 被引量:2
6
作者 张鹏飞 《空间电子技术》 2008年第2期64-67,共4页
文章利用消息传递协议MPI开发了针对电大尺寸开口腔体单站雷达截面(RCS)的射线弹跳法(SBR)并行计算程序。程序采用按照RCS计算角度间隔分配计算任务的大粒度并行计算方法,取得了较高的并行计算效率,大大减少了电大尺寸开口腔体的RCS计... 文章利用消息传递协议MPI开发了针对电大尺寸开口腔体单站雷达截面(RCS)的射线弹跳法(SBR)并行计算程序。程序采用按照RCS计算角度间隔分配计算任务的大粒度并行计算方法,取得了较高的并行计算效率,大大减少了电大尺寸开口腔体的RCS计算时间。算例计算结果与文献吻合良好。 展开更多
关键词 电大尺寸开口腔体 雷达截面 射线弹跳法 并行计算
下载PDF
High-Gain and Low-RCS Patch Antenna Array Based on Slot-EBG Structure
7
作者 Zijian Han Wei Song +1 位作者 Xinqing Sheng Wenbo Zheng 《Journal of Beijing Institute of Technology》 EI CAS 2019年第4期750-755,共6页
A novel low radar cross-section(RCS)and high gain patch antenna array is proposed.A pair of slots introduced on the mushroom electromagnetic bandgap(EBG)patch realize polarization-dependency and act as parasitic radia... A novel low radar cross-section(RCS)and high gain patch antenna array is proposed.A pair of slots introduced on the mushroom electromagnetic bandgap(EBG)patch realize polarization-dependency and act as parasitic radiation to enhance the antenna gain.A chessboard-like configuration composed of slot-EBG blocks is further equipped on the antenna array for scattering cancellation.Optimizing the layout pattern enables the designing of a high-gain and low-RCS antenna array using the slot-EBGs.Full-wave simulations validate that a front gain enhancement of more than 2.5.dB in the operating frequency band and low-RCS in a broad frequency band for normal incidence are obtained by the proposed antenna array. 展开更多
关键词 patch antenna array radar cross-section(rcs) front gain
下载PDF
Study of RCS characteristics of tilt-rotor aircraft based on dynamic calculation approach
8
作者 Zeyang ZHOU Jun HUANG 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2022年第4期426-437,共12页
To study the Radar Cross-Section(RCS) characteristics of the tilt-rotor aircraft, a dynamic calculation approach that takes into account rotor rotation and nacelle tilt is presented.Physical optics and physical theory... To study the Radar Cross-Section(RCS) characteristics of the tilt-rotor aircraft, a dynamic calculation approach that takes into account rotor rotation and nacelle tilt is presented.Physical optics and physical theory of diffraction are used to deal with the instantaneous electromagnetic scattering of the target. The RCS of the aircraft in the helicopter mode, fixed-wing mode and transition mode is analyzed. The results show that in the fixed-wing mode, the blade has a weaker deflection effect on the head incident wave in the horizontal plane. The helicopter mode improves the scattering of the rotor in the horizontal plane, while it increases the scattering source on the surface of the nacelle. At a fixed tilt angle, the RCS of the aircraft under a given azimuth angle still shows obvious dynamic characteristics. Dynamic tilting significantly changes the scattering effects of blades, hubs, nacelles and wingtips. The proposed approach is shown to be feasible and effective to learn the electromagnetic scattering characteristics of the tilt rotor aircraft. 展开更多
关键词 Dynamic electromagnetic scattering Nacelle tilt radar cross-section(rcs) Tilt-rotor aircraft Transition mode
原文传递
Multifunctional MXene/C Aerogels for Enhanced Microwave Absorption and Thermal Insulation 被引量:3
9
作者 Fushuo Wu Peiying Hu +7 位作者 Feiyue Hu Zhihua Tian Jingwen Tang Peigen Zhang Long Pan Michel WBarsoum Longzhu Cai ZhengMing Sun 《Nano-Micro Letters》 SCIE EI CAS CSCD 2023年第11期74-89,共16页
Two-dimensional transition metal carbides and nitrides(MXene)have emerged as promising candidates for microwave absorption(MA)materials.However,they also have some drawbacks,such as poor impedance matching,high self-s... Two-dimensional transition metal carbides and nitrides(MXene)have emerged as promising candidates for microwave absorption(MA)materials.However,they also have some drawbacks,such as poor impedance matching,high self-stacking tendency,and high density.To tackle these challenges,MXene nanosheets were incorporated into polyacrylonitrile(PAN)nanofibers and subsequently assembled into a three-dimensional(3D)network structure through PAN carbonization,yielding MXene/C aerogels.The 3D network effectively extends the path of microcurrent transmission,leading to enhanced conductive loss of electromagnetic(EM)waves.Moreover,the aerogel’s rich pore structure significantly improves the impedance matching while effectively reducing the density of the MXenebased absorbers.EM parameter analysis shows that the MXene/C aerogels exhibit a minimum reflection loss(RL_(min))value of−53.02 dB(f=4.44 GHz,t=3.8 mm),and an effective absorption bandwidth(EAB)of 5.3 GHz(t=2.4 mm,7.44–12.72 GHz).Radar cross-sectional(RCS)simulations were employed to assess the radar stealth effect of the aerogels,revealing that the maximum RCS reduction value of the perfect electric conductor covered by the MXene/C aerogel reaches 12.02 dB m^(2).In addition to the MA performance,the MXene/C aerogel also demonstrates good thermal insulation performance,and a 5-mm-thick aerogel can generate a temperature gradient of over 30℃ at 82℃.This study provides a feasible design approach for creating lightweight,efficient,and multifunctional MXene-based MA materials. 展开更多
关键词 MXene Microwave absorption AEROGEL radar cross-sectional(rcs)simulation Thermal insulation
下载PDF
一体化雷达散射截面计算方法研究 被引量:7
10
作者 李建周 许家栋 +1 位作者 郭陈江 韦高 《西北工业大学学报》 EI CAS CSCD 北大核心 2003年第4期449-452,共4页
针对传统 RCS分析中 ,目标建模与 RCS计算的分立状态 ,提出了一种一体化计算方法。将RCS图形算法集成到 CAD造型软件中 ,为目标外形设计和 RCS分析提供了一个完整的解决方案。计算实例说明 ,这种方法不但能够满足精度要求 ,而且可以极... 针对传统 RCS分析中 ,目标建模与 RCS计算的分立状态 ,提出了一种一体化计算方法。将RCS图形算法集成到 CAD造型软件中 ,为目标外形设计和 RCS分析提供了一个完整的解决方案。计算实例说明 ,这种方法不但能够满足精度要求 ,而且可以极大地简化前处理工作 。 展开更多
关键词 雷达散射截面(rcs) 图形算法(GRECO) 一体化rcs计算
下载PDF
武装直升飞机雷达散射截面的估算方法 被引量:14
11
作者 苏东林 宗国明 吕善伟 《北京航空航天大学学报》 EI CAS CSCD 北大核心 1994年第3期248-252,共5页
讨论了在预先不知道武装直升飞机详细外形数据的情况下,根据三视图及少量外形数据,对其外形进行拟合,对雷达散射截面进行估算的方法,并对-武装直升飞机进行了理论计算和实验测试,结果吻合较好.
关键词 雷达反射 雷达散射截面 武装直升机
下载PDF
一体化双站散射图形算法 被引量:7
12
作者 李建周 毛继志 许家栋 《微波学报》 CSCD 北大核心 2004年第1期19-22,共4页
研究了图形算法计算双站RCS的方法 ,并将RCS分析与目标外形设计相结合 ,提出了一种一体化方法 ,将图形算法集成到CAD造型软件中 ,能够在目标外形设计阶段随时分析其双站散射特性。计算实例说明 ,这种方法不但能够满足计算精度要求 ,而... 研究了图形算法计算双站RCS的方法 ,并将RCS分析与目标外形设计相结合 ,提出了一种一体化方法 ,将图形算法集成到CAD造型软件中 ,能够在目标外形设计阶段随时分析其双站散射特性。计算实例说明 ,这种方法不但能够满足计算精度要求 ,而且可以简化RCS的前处理工作 。 展开更多
关键词 雷达散射截面 双站散射 图形算法 CAD 物理光学法
下载PDF
逆合成孔径雷达图像仿真研究 被引量:2
13
作者 刘拥军 葛德彪 张忠治 《电波科学学报》 EI CSCD 北大核心 2009年第5期895-898,924,985,共6页
实现了从目标建模、散射计算到雷达图像仿真的全过程。首先使用Auto-CAD软件对目标建模并进行三角面元离散,采用反方向光学射线追踪技术进行消隐,以物理光学近似理论计算目标的后向散射,最后利用逆合成孔径雷达成像方法得到了目标的雷... 实现了从目标建模、散射计算到雷达图像仿真的全过程。首先使用Auto-CAD软件对目标建模并进行三角面元离散,采用反方向光学射线追踪技术进行消隐,以物理光学近似理论计算目标的后向散射,最后利用逆合成孔径雷达成像方法得到了目标的雷达仿真图像。球体的计算结果验证了物理光学的正确性,坦克和飞机模型的仿真成像结果与实验结果和CAD模型的对比进一步证实了目标仿真成像系统的有效性。 展开更多
关键词 雷达散射截面积 三角面元 电磁计算 逆合成孔径雷达
下载PDF
微动复杂目标雷达散射截面计算方法 被引量:1
14
作者 王胜 范红旗 石志广 《现代雷达》 CSCD 北大核心 2008年第6期32-35,39,共5页
在对雷达目标的动态特征提取和识别的研究中,需要能够逼真地反映目标的结构特性和运动特性的模拟信号。文中应用物理光学法和物理绕射理论,针对复杂动目标和多目标对目标面元和尖劈进行多普勒频率分级的方法实现了动目标的雷达散射截面... 在对雷达目标的动态特征提取和识别的研究中,需要能够逼真地反映目标的结构特性和运动特性的模拟信号。文中应用物理光学法和物理绕射理论,针对复杂动目标和多目标对目标面元和尖劈进行多普勒频率分级的方法实现了动目标的雷达散射截面计算;提出了微面元快速消隐算法和微动目标的模型剖分准则。应用该方法可以模拟转动、颤动以及非刚体运动目标的电磁散射特性。 展开更多
关键词 动态目标 雷达散射截面积 三角面元 电磁计算
下载PDF
任意形状目标的多分辨时域(MRTD)散射特性分析 被引量:2
15
作者 曹群生 《南京航空航天大学学报》 EI CAS CSCD 北大核心 2006年第6期655-659,共5页
应用三维多分辨时域(Three-dimensionalmu ltiresolution time-dom ain,3D-M RTD)方法研究一些具有任意形状目标的雷达散射截面(R adar cross-section,RCS),其中M RTD中的电磁场量用小波函数Battle-Lemarié的三次样条尺度函数展开... 应用三维多分辨时域(Three-dimensionalmu ltiresolution time-dom ain,3D-M RTD)方法研究一些具有任意形状目标的雷达散射截面(R adar cross-section,RCS),其中M RTD中的电磁场量用小波函数Battle-Lemarié的三次样条尺度函数展开。推导出了严格的M RTD方法的场的时空迭代关系式及M RTD方法的三维散射模型,其中包括基于最近邻网格近似的表面等价电流的计算、散射场的近-远场变换和基于离散的傅里叶(Fourier)变换的RCS计算式。采用M RTD方法(并采用其适用的近似网格剖分方法)研究了从低频(瑞利和谐振模式)到高频(准光学模式)的几种结构的双-站(Bi-static)RCS模式。与传统的时域有限差分(Finited ifference time-do-main,FDTD)法的结果进行了比较,发现M RTD方法较FDTD方法节省相当的计算空间和时间。 展开更多
关键词 多分辨时域方法 rcs计算 时域有限差分方法
下载PDF
一种适于缝隙等表面缺陷类目标的评估方法 被引量:1
16
作者 赵京城 付鑫如 +2 位作者 杨涛 高旭 艾俊强 《电子与信息学报》 EI CSCD 北大核心 2019年第2期302-308,共7页
缝隙等表面缺陷类目标对飞行器的隐身性能具有重要影响。根据缝隙等表面缺陷类目标的散射机理,该文提出一种载体背景对消方法,用于评估表面缺陷类目标散射。该方法将载体作为目标背景的一部分,通过矢量场相减的方式对消掉载体的自身散... 缝隙等表面缺陷类目标对飞行器的隐身性能具有重要影响。根据缝隙等表面缺陷类目标的散射机理,该文提出一种载体背景对消方法,用于评估表面缺陷类目标散射。该方法将载体作为目标背景的一部分,通过矢量场相减的方式对消掉载体的自身散射影响,特别是载体强散射角域的散射影响,从而获得了全角域范围内表面缺陷类目标的散射特性数据,解决了使用常规方法目标受载体影响无法获得完整散射特性的问题。通过数值计算和实验测量的结果对比表明:该方法可以对缺陷类目标的电磁散射特性进行有效评估。对消后载体散射得到了极大程度的降低,有效提高了缺陷类目标的计算或测量精度;同时由于排除载体自身散射的影响,避免了对载体尺寸、超低散射特性的要求,有效降低了载体的加工设计成本。 展开更多
关键词 雷达散射截面 矢量对消 电磁缺陷 数值计算 实验测量
下载PDF
无人直升机雷达目标特性研究
17
作者 蒋志华 《宇航计测技术》 CSCD 2015年第2期61-66,42,共7页
雷达散射目标特性(RCS)是无人直升机的重要性能指标。以某型直升机几何参数为例,分析了无人直升机RCS的特点,基于CAD软件法和电磁计算网格法建立其几何模型并生成了机身旋翼电磁计算网格。在编制计算分析流程基础上,分析计算了无人直升... 雷达散射目标特性(RCS)是无人直升机的重要性能指标。以某型直升机几何参数为例,分析了无人直升机RCS的特点,基于CAD软件法和电磁计算网格法建立其几何模型并生成了机身旋翼电磁计算网格。在编制计算分析流程基础上,分析计算了无人直升机RCS性能指标,得出了无人直升机的RCS分析结果。 展开更多
关键词 无人直升机 测量不确定度 雷达目标特性(rcs) CAD 软件 rcs 计算
下载PDF
Efficient manipulation of terahertz waves by multi-bit coding metasurfaces and further applications of such metasurfaces 被引量:2
18
作者 祁云平 张宝和 +3 位作者 丁京徽 张婷 王向贤 易早 《Chinese Physics B》 SCIE EI CAS CSCD 2021年第2期336-343,共8页
Benefiting from the unprecedented superiority of coding metasurfaces at manipulating electromagnetic waves in the microwave band,in this paper,we use the Pancharatnam-Berry(PB)phase concept to propose a high-efficienc... Benefiting from the unprecedented superiority of coding metasurfaces at manipulating electromagnetic waves in the microwave band,in this paper,we use the Pancharatnam-Berry(PB)phase concept to propose a high-efficiency reflectivetype coding metasurface that can arbitrarily manipulate the scattering pattern of terahertz waves and implement many novel functionalities.By optimizing the coding sequences,we demonstrate that the designed 1-,2-,and 3-bit coding metasurfaces with specific coding sequences have the strong ability to control reflected terahertz waves.The two proposed1-bit coding metasurfaces demonstrate that the reflected terahertz beam can be redirected and arbitrarily controlled.For normally incident x-and y-polarized waves,a 10 d B radar cross-section(RCS)reduction can be achieved from 2.1 THz to5.2 THz using the designed 2-bit coding metasurface.Moreover,two kinds of orbital angular momentum(OAM)vortex beams with different moduli are generated by a coding metasurface using different coding sequences.Our research provides a new degree of freedom for the sophisticated manipulation of terahertz waves,and contributes to the development of metasurfaces towards practical applications. 展开更多
关键词 coding metasurface Pancharatnam-Berry phase multiple beams radar cross-section(rcs)reduction orbital angular momentum
下载PDF
电磁计算在飞机隐身设计中的应用及未来需求 被引量:2
19
作者 艾俊强 张扬 王健 《电波科学学报》 EI CSCD 北大核心 2020年第1期122-127,共6页
随着飞机隐身技术的发展,对电磁计算提出了更高的要求,文中分析了国内外技术基础,梳理了电磁计算在飞机雷达隐身设计中的切入点和应用点,阐述了设计过程中利用电磁仿真手段重点开展的分析研究内容.在此基础上,分析了目前电磁计算在飞机... 随着飞机隐身技术的发展,对电磁计算提出了更高的要求,文中分析了国内外技术基础,梳理了电磁计算在飞机雷达隐身设计中的切入点和应用点,阐述了设计过程中利用电磁仿真手段重点开展的分析研究内容.在此基础上,分析了目前电磁计算在飞机隐身设计领域存在的技术难点以及未来技术需求,并结合飞机研制工程经验,指出未来电磁计算将重点突破超电大尺寸目标快速计算、隐身结构材料仿真等问题. 展开更多
关键词 飞机 隐身 雷达散射截面(rcs) 电磁计算 仿真
下载PDF
A novel polarization converter based on the band-stop frequency selective surface
20
作者 廖昆 孙世宁 +3 位作者 郑昕原 邵纤纤 孔祥鲲 刘少斌 《Chinese Physics B》 SCIE EI CAS CSCD 2022年第2期380-386,共7页
A dual-passband single-polarized converter based on the band-stop frequency selective surface(FSS)with a low radar cross-section(RCS)is designed in this article.The unit cell of the proposed converter is formed by a p... A dual-passband single-polarized converter based on the band-stop frequency selective surface(FSS)with a low radar cross-section(RCS)is designed in this article.The unit cell of the proposed converter is formed by a polarization layer attached to the band-stop frequency selective surface.The simulation results reveal that the co-polarization reflection coefficients below-10 d B are achieved in 3.82–13.64 GHz with a 112.4%fractional bandwidth(the ratio of the signal bandwidth to the central frequency).Meanwhile,a polarization conversion band is realized from 8.14 GHz to 9.27 GHz with a polarization conversion ratio which is over 80%.Moreover,the 1 d B transmission window is obtained in two nonadjacent bands of 3.42–7.02 GHz and 10.04–13.91 GHz corresponding to the relative bandwidths of 68.9%and 32.3%,respectively.Furthermore,the radar cross-section of the designed structure can be reduced in the wideband from 2.28 GHz to 14 GHz,and the 10 d B RCS reduction in the range of 4.10–13.35 GHz is achieved.In addition,the equivalent circuit model of this converter is established,and the simulation results of the Advanced Design System(ADS)match well with those of CST Microwave Studio(CST).The archetype of the designed converter is manufactured and measured.The experiment results match the simulation results well,which proves the reliability of the simulation results. 展开更多
关键词 dual-passband single-polarized converter POLARIZATION radar cross-section(rcs)
下载PDF
上一页 1 2 下一页 到第
使用帮助 返回顶部