Kravchenko probabilityweight functions in problems of radar signals correlation processing

In this report the combined method of correlation radar signal(RS)processing based on the theory of atomic functions(AF)is examined.Examples of using of new Kravchenko probability weight functions(WF)designs are presented.Quality functional to estimate accuracy and efficiency of RS processing for concrete physical models is constructed.It is shown that the proposed approach significantly improves the quality of the coherent analysis of RS.

Angle estimation for bistatic MIMO radar with unknown mutual coupling based on three-way compressive sensing

The problem of angle estimation for bistatic multiple-input multiple-output radar in the present of unknown mutual coupling (MC) is investigated, and a three-way compressive sensing (TWCS) estimation algorithm is developed. To exploit the inherent multi-dimensional structure of received data, a trilinear tensor model is firstly formulated. Then the de-coupling operation is followed. Thereafter, the high-order singular value decomposition is applied to compress the high dimensional tensor to a much smaller one. The estimation of the compressed direction matrices are linked to the compressed trilinear model, and finally two over-complete dictionaries are constructed for angle estimation. Also, Cramer-Rao bounds for angle and MC estimation are derived. The proposed TWCS algorithm is effective from the perspective of estimation accuracy as well as the computational complexity, and it can achieve automatically paired angle estimation. Simulation results show that the proposed method has much better estimation accuracy than the existing algorithms in the low signal-to-noise ratio scenario, and its estimation performance is very close to the parallel factor analysis (PARAFAC) algorithm at the high SNR regions. ? 2017 Beijing Institute of Aerospace Information.

Radar Emitter Signal Recognition Based on Complexity Features

Intra-pulse characteristics of different radar emitter signals reflect on signal waveform by way of changing frequency, phase and amplitude. A novel approach was proposed to extract complexity features of radar emitter signals in a wide range of signal-to-noise ratio (SNR), and radial basis probability neural network (RBPNN) was used to recognize different radar emitter signals. Complexity features, including Lempel-Ziv complexity (LZC) and correlation dimension (CD), can measure the complexity and irregularity of signals, which mirrors the intra-pulse modulation laws of radar emitter signals. In an experiment, LZC and CD features of 10 typical radar emitter signals were extracted and RBPNN was applied to identify the 10 radar emitter signals. Simulation results show that the proposed approach is effective and has good application values because average accurate recognition rate is high when SNR varies in a wide range.

Modulation recognition of MIMO radar signal based on joint HOS and SNR algorithm

This paper presents a joint high order statistics （HOS） and signal-to-noise ratio （SNR） algorithm for the recognition of multiple-input multiple-output （MIMO） radar signal without a priori knowledge of the signal parameters. This method is capable of recognizing the MIMO radar signal as well as discriminating it from single-carrier signal adopted by conventional radar. Meanwhile, the sub-carrier number of the none-coding MIMO radar signal is estimated. Extensive simulations are carried out in different operating conditions. Simulation results prove the feasibility and indicate that the recognition probability could reach over 90% when the value of SNR is above 0 dB.

Radar Emitter Signal Recognition Using Wavelet Packet Transform and Support Vector Machines

This paper presents a novel method for radar emitter signal recognition. First, wavelet packet transform （WPT） is introduced to extract features from radar emitter signals. Then, rough set theory is used to select the optimal feature subset with good discriminability from original feature set, and support vector machines （SVMs） are employed to design classifiers. A large number of experimental results show that the proposed method achieves very high recognition rates for 9 radar emitter signals in a wide range of signal-to-noise rates, and proves a feasible and valid method.

Security information factor based airborne radar RF stealth

Radar radio frequency （RF） stealth is very important in electronic war （EW）, and waveform design and selection. Existing evaluation rules of radar RF stealth include too many parameters of radar and interceptors, such as Schleher interception factor, which makes it difficult to evaluate radar RF stealth technologies if interceptor parameters are unknown. In communication, security capacity has been presented to describe the possible ability to communicate in complete security. Since the essential of the secu- rity capacity is to have the interceptor get none valued information from the emitter, this paper is proposed to study security infor- mation factors taking advantage of mutual information to evaluate radar RF stealth under some conditions. Through analyzing mutual information obtained by the radar and the interceptor, this paper defines the security information factor with and without cooperative jamming. Furthermore, this paper deduces the ratio of the match filter to the match incoherent filter and discuss mutual information received by the interceptor. Numerical simulations illustrate radar RF stealth effects based on the security information factor concept under different conditions.

Design of a Radar Signal Simulator Based on Virtex-Ⅱ Series FPGA

A simulation method to simulate the pseudorandom code P. M PP radar＇ s echo signal is proposed that makes use of the pre-generated Doppler simulation data, according to the relative movement parameter of the radar and the target. It resolves the problem of the high precision distance simulation and the high speed digital shift phase. At the same time, the radar dynamic digital video frequency target signal simulator is designed. Simulation results of the critical unit and the output waveform are given. The result of the test satisfies the system＇s request.

Implementation of a kind of FPGA-based binary phase coded radar signal processor architecture

A flexible field programmable gate array based radar signal processor is presented. The radar signal processor mainly consists of five functional modules： radar system timer, binary phase coded pulse compression（PC）, moving target detection （MTD）, constant false alarm rate （CFAR） and target dots processing. Preliminary target dots information is obtained in PC, MTD, and CFAR modules and Nios I! CPU is used for target dots combination and false sidelobe target removing. Sys- tem on programmable chip （SOPC） technique is adopted in the system in which SDRAM is used to cache data. Finally, a FPGA-based binary phase coded radar signal processor is realized and simula- tion result is given.

Doppler radar by using single multicarrier pulse based on optical fibre delay lines

The proposed Doppler measurement technique shows that the Doppler measurements can be accomplished by a single pulse with multiple frequency components through optical fibre delay lines.Range and velocity ambiguity can be removed,and the velocity resolution can be improved dramatically by using long optical fibre delay lines.Furthermore,the velocity resolution can be modified by adjusting the length of optical fibre delay lines.In addition,the proposed radar can achieve high range resolution by using a single wideband pulse.As a result,the new approach can improve radar performance significantly.

Key Radar Signal Sorting and Recognition Method Based on Clustering Combined with PRI Transform Algorithm

In this paper,we investigate the problem of key radar signal sorting and recognition in electronic intelligence(ELINT).Our major contribution is the development of a combined approach based on clustering and pulse repetition interval(PRI)transform algorithm,to solve the problem that the traditional methods based on pulse description word(PDW)were not exclusively targeted at tiny particular signals and were less time-efficient.We achieve this in three steps:firstly,PDW presorting is carried out by the DBSCAN(Density-Based Spatial Clustering of Applications with Noise)clustering algorithm,and then PRI estimates of each cluster are obtained by the PRI transform algorithm.Finally,by judging the matching between various PRI estimates and key targets,it is determined whether the current signal contains key target signals or not.Simulation results show that the proposed method should improve the time efficiency of key signal recognition and deal with the complex signal environment with noise interference and overlapping signals.

Detecting sand-dust storms using a wind-profiling radar

Sand-dust storm is a type of disastrous weather, typically occurring in arid and semi-arid climates. This study selected a region in the hinterlands of the Taklimakan Desert, called the Tazhong region, as the experimental area to quantitatively estimate the particle concentrations of sand-dust storms using the boundary layer wind-profiling radar. We thoroughly studied the radar echo signals and reflectivity factor features during the sand-dust storms. The results indicate that（1） under sand-dust storm conditions, boundary layer wind-profiling radar cannot capture the complete information regarding horizontal wind velocity and direction, but it can obtain the backscattering intensity of sand-dust storms; and（2） during sand-dust storms particle size distributions in the surface layer closely resemble log-normal distributions, with sand-dust particles sizes of 90–100 μm accounting for the maximum particle probability. Retrieved particle size distributions at heights of 600, 800, and 1000 m follow log-normal distributions, and the expected value of particle diameter decreases gradually with increasing height. From the perspective of orders of magnitude, the retrieved results for particle number concentrations and mass concentrations are consistent with previous aircraft-detected results, indicating that it is basically feasible to use boundary layer wind-profiling radar to quantitatively detect the particle concentrations of dust storms.

Array-error estimation method for multi-channel SAR systems in azimuth

For multi-channel synthetic aperture radar（SAR） systems, since the minimum antenna area constraint is eliminated,wide swath and high resolution SAR image can be achieved.However, the unavoidable array errors, consisting of channel gainphase mismatch and position uncertainty, significantly degrade the performance of such systems. An iteration-free method is proposed to simultaneously estimate position and gain-phase errors.In our research, the steering vectors corresponding to a pair of Doppler bins within the same range bin are studied in terms of their rotational relationships. The method is based on the fact that the rotational matrix only depends on the position errors and the frequency spacing between the paired Doppler bins but is independent of gain-phase error. Upon combining the projection matrices corresponding to the paired Doppler bins, the position errors are directly obtained in terms of extracting the rotational matrix in a least squares framework. The proposed method, when used in conjunction with the self-calibration algorithm, performs stably as well as has less computational load, compared with the conventional methods. Simulations reveal that the proposed method behaves better than the conventional methods even when the signal-to-noise ratio（SNR） is low.

Novel polarimetric detector for target detection in heterogeneous clutter

A detection of static or slowly moving targets in the inhomogeneous clutter of polarimetric radar is researched and a new detector without exploiting the training set is developed, which has a good performance against the inhomogeneous clutter. The decision rule ensures the constant false alarm rate (CFAR) with respect to the disturbance covariance matrix. Numerical results show the robustness of the proposed method against the inhomogeneous clutter. ? 2016 Beijing Institute of Aerospace Information.

The signal selection and processing method for polarization measurement radar

Based on the ambiguity function, a novel signal processing method for the polarization measurement radar is developed. One advantage of this method is that the two orthogonal polarized signals do not have to be perpendicular to each other, which is required by traditional methods. The error due to the correlation of the two transmitting signals in the traditional method, can be reduced by this new approach. A concept called ambiguity function matrix （AFM） is introduced based on this method. AFM is a promising tool for the signal selection and design in the polarization scattering matrix measurement. The waveforms of the polarimetric radar are categorized and analyzed based on AFM in this paper. The signal processing flow of this method is explained. And the polarization scattering matrix measurement performance is testified by simulation. Furthermore, this signal processing method can be used in the inter-pulse interval measurement technique as well as in the instantaneous measurement technique.

Multi-function radar emitter identification based on stochastic syntax-directed translation schema

To cope with the problem of emitter identification caused by the radar words＇ uncertainty of measured multi-function radar emitters, this paper proposes a new identification method based on stochastic syntax-directed translation schema（SSDTS）. This method, which is deduced from the syntactic modeling of multi-function radars, considers the probabilities of radar phrases appearance in different radar modes as well as the probabilities of radar word errors occurrence in different radar phrases. It concludes that the proposed method can not only correct the defective radar words by using the stochastic translation schema, but also identify the real radar phrases and working modes of measured emitters concurrently. Furthermore, a number of simulations are presented to demonstrate the identification capability and adaptability of the SSDTS algorithm.The results show that even under the condition of the defective radar words distorted by noise,the proposed algorithm can infer the phrases, work modes and types of measured emitters correctly.

An approach for parameter estimation of combined CPPM and LFM radar signal

In this paper, the problem of parameter estimation of the combined radar signal adopting chaotic pulse position modulation （CPPM） and linear frequency modulation （LFM）, which can be widely used in electronic countermeasures, is addressed. An approach is proposed to estimate the initial frequency and chirp rate of the combined signal by exploiting the second-order cyclostationarity of the intra-pulse signal. In addition, under the condition of the equal pulse width, the pulse repetition interval （PRI） of the combined signal is predicted using the low-order Volterra adaptive filter. Simulations demonstrate that the proposed cyclic autocorrelation Hough transform （CHT） algorithm is theoretically tolerant to additive white Gaussian noise. When the value of signal noise to ratio （SNR） is less than 4 dB, it can still estimate the intra-pulse parameters well. When SNR = 3 dB, a good prediction of the PRI sequence can be achieved by the Volterra adaptive filter algorithm, even only 100 training samples.

ABORT-like detector to combat active deceptive jamming in a network of LFM radars

This paper studies an electronic counter-counter measures（ECCM） scheme combating against deceptive electronic counter measure（ECM） techniques. An adaptive detector exploiting generalized likelihood ratio test（GRLT） criterion is applied to detect the presence of deceptive jamming in fractional Fourier transform（Fr FT） domain. First, the generating mechanism of spurious frequencies is analyzed based on the Volterra serial. The proposed nonlinear distortion model based on power amplifier behavior is robust in distortion analysis when the memory effect is considered.Second, a modified adaptive beamformer orthogonal rejection test（ABORT） like detector in closed form is built. The proposed detector can discriminate the echo and deceptive jamming adaptively by exploiting primary data and secondary data. This ECCM scheme is capable of guaranteeing the performance without the restriction of orthogonality, which is essential for the ABORT detectors. The expansion to radar network is discussed as a special case at the final part of this paper. Numerical simulations demonstrate the effectiveness of the proposed method.