In recent years,distributed photovoltaics(DPV)has ushered in a good development situation due to the advantages of pollution-free power generation,full utilization of the ground or roof of the installation site,and ba...In recent years,distributed photovoltaics(DPV)has ushered in a good development situation due to the advantages of pollution-free power generation,full utilization of the ground or roof of the installation site,and balancing a large number of loads nearby.However,under the background of a large-scale DPV grid-connected to the county distribution network,an effective analysis method is needed to analyze its impact on the voltage of the distribution network in the early development stage of DPV.Therefore,a DPV orderly grid-connected method based on photovoltaics grid-connected order degree(PGOD)is proposed.This method aims to orderly analyze the change of voltage in the distribution network when large-scale DPV will be connected.Firstly,based on the voltagemagnitude sensitivity(VMS)index of the photovoltaics permitted grid-connected node and the acceptance of grid-connected node(AoGCN)index of other nodes in the network,thePGODindex is constructed to determine the photovoltaics permitted grid-connected node of the current photovoltaics grid-connected state network.Secondly,a photovoltaics orderly grid-connected model with a continuous updating state is constructed to obtain an orderly DPV grid-connected order.The simulation results illustrate that the photovoltaics grid-connected order determined by this method based on PGOD can effectively analyze the voltage impact of large-scale photovoltaics grid-connected,and explore the internal factors and characteristics of the impact.展开更多
Nowadays the optimal allocation of distributed generation (DG) in the distribution network becomes the popular research area in restructuring of power system. The capacitor banks introduced in the distribution network...Nowadays the optimal allocation of distributed generation (DG) in the distribution network becomes the popular research area in restructuring of power system. The capacitor banks introduced in the distribution networks for reactive power compensation also have the capacity to minimize the real and reactive power losses occurred in the system. Hence, this research integrates the allocation of renewable energy DG and capacitor banks in the radial distribution network to minimize the real power loss occurred in the system. A two-stage methodology is used for simultaneous allocation of renewable DG and capacitor banks. The optimum location of renewable energy DG and capacitor banks is determined using the distributed generation sitting index (DGSI) ranking method and the optimum sizing of DG and capacitor banks is found out for simultaneous placement using weight improved particle swarm optimization algorithm (WIPSO) and self adaptive differential evolution algorithm (SADE). This two-stage methodology reduces the burden of SADE and WIPSO algorithm, by using the DGSI index in determining the optimal location. Hence the computational time gets reduced which makes them suitable for online applications. By using the above methodology, a comprehensive performance analysis is done on IEEE 33 bus and 69 bus RDNs and the results are discussed in detail.展开更多
The popularity of electric vehicles(EVs)has sparked a greater awareness of carbon emissions and climate impact.Urban mobility expansion and EV adoption have led to an increased infrastructure for electric vehicle char...The popularity of electric vehicles(EVs)has sparked a greater awareness of carbon emissions and climate impact.Urban mobility expansion and EV adoption have led to an increased infrastructure for electric vehicle charging stations(EVCSs),impacting radial distribution networks(RDNs).To reduce the impact of voltage drop,the increased power loss(PL),lower system interruption costs,and proper allocation and positioning of the EVCSs and capacitors are necessary.This paper focuses on the allocation of EVCS and capacitor installations in RDN by maximizing net present value(NPV),considering the reduction in energy losses and interruption costs.As a part of the analysis considering reliability,several compensation coefficients are used to evaluate failure rates and pinpoint those that will improve NPV.To locate the best nodes for EVCSs and capacitors,the hybrid of grey wolf optimization(GWO)and particle swarm optimization(PSO)(HGWO_PSO)and the hybrid of PSO and Cuckoo search(CS)(HPSO_CS)algorithms are proposed,forming a combination of GWO,PSO,and CS optimizations.The impact of EVCSs on NPV is also investigated in this paper.The effectiveness of the proposed optimization algorithms is validated on an IEEE 33-bus RDN.展开更多
A new combined model is proposed to obtain predictive data value applied in state estimation for radial power distribution networks. The time delay part of the model is calculated by a recursive least squares algorith...A new combined model is proposed to obtain predictive data value applied in state estimation for radial power distribution networks. The time delay part of the model is calculated by a recursive least squares algorithm of system identification, which can gradually forget past information. The grey series part of the model uses an equal dimension new information model (EDNIM) and it applies 3 points smoothing method to preprocess the original data and modify remnant difference by GM(1,1). Through the optimization of the coefficient of the model, we are able to minimize the error variance of predictive data. A case study shows that the proposed method achieved high calculation precision and speed and it can be used to obtain the predictive value in real time state estimation of power distribution networks.展开更多
With the growing number and capacity of photovoltaic(PV)installations connected to distribution networks,power quality issues related to voltage regulation are becoming relevant problems for power distribution compani...With the growing number and capacity of photovoltaic(PV)installations connected to distribution networks,power quality issues related to voltage regulation are becoming relevant problems for power distribution companies and for PV owners.In many countries,like Italy,this has required the revision of the standards concerning the connection to the public distribution network of distributed renewable generation.The new standards require a flexible operation of generation plants that have to be capable to change the active and reactive power dynamically in function of the network parameters(i.e.frequency and network local voltage)in local control or following external commands.Therefore,this paper investigates the use of smart inverter in a critical PV installation,where relevant voltage fluctuations exist.A case study,with real network parameters monitoring data and measurements,is discussed in the paper with the aim of showing how‘smart’features of new inverters can be implemented to increase PV plant integration in low voltage distribution networks.展开更多
基金supported by North China Electric Power Research Institute’s Self-Funded Science and Technology Project“Research on Distributed Energy Storage Optimal Configuration and Operation Control Technology for Photovoltaic Promotion in the Entire County”(KJZ2022049).
文摘In recent years,distributed photovoltaics(DPV)has ushered in a good development situation due to the advantages of pollution-free power generation,full utilization of the ground or roof of the installation site,and balancing a large number of loads nearby.However,under the background of a large-scale DPV grid-connected to the county distribution network,an effective analysis method is needed to analyze its impact on the voltage of the distribution network in the early development stage of DPV.Therefore,a DPV orderly grid-connected method based on photovoltaics grid-connected order degree(PGOD)is proposed.This method aims to orderly analyze the change of voltage in the distribution network when large-scale DPV will be connected.Firstly,based on the voltagemagnitude sensitivity(VMS)index of the photovoltaics permitted grid-connected node and the acceptance of grid-connected node(AoGCN)index of other nodes in the network,thePGODindex is constructed to determine the photovoltaics permitted grid-connected node of the current photovoltaics grid-connected state network.Secondly,a photovoltaics orderly grid-connected model with a continuous updating state is constructed to obtain an orderly DPV grid-connected order.The simulation results illustrate that the photovoltaics grid-connected order determined by this method based on PGOD can effectively analyze the voltage impact of large-scale photovoltaics grid-connected,and explore the internal factors and characteristics of the impact.
文摘Nowadays the optimal allocation of distributed generation (DG) in the distribution network becomes the popular research area in restructuring of power system. The capacitor banks introduced in the distribution networks for reactive power compensation also have the capacity to minimize the real and reactive power losses occurred in the system. Hence, this research integrates the allocation of renewable energy DG and capacitor banks in the radial distribution network to minimize the real power loss occurred in the system. A two-stage methodology is used for simultaneous allocation of renewable DG and capacitor banks. The optimum location of renewable energy DG and capacitor banks is determined using the distributed generation sitting index (DGSI) ranking method and the optimum sizing of DG and capacitor banks is found out for simultaneous placement using weight improved particle swarm optimization algorithm (WIPSO) and self adaptive differential evolution algorithm (SADE). This two-stage methodology reduces the burden of SADE and WIPSO algorithm, by using the DGSI index in determining the optimal location. Hence the computational time gets reduced which makes them suitable for online applications. By using the above methodology, a comprehensive performance analysis is done on IEEE 33 bus and 69 bus RDNs and the results are discussed in detail.
文摘The popularity of electric vehicles(EVs)has sparked a greater awareness of carbon emissions and climate impact.Urban mobility expansion and EV adoption have led to an increased infrastructure for electric vehicle charging stations(EVCSs),impacting radial distribution networks(RDNs).To reduce the impact of voltage drop,the increased power loss(PL),lower system interruption costs,and proper allocation and positioning of the EVCSs and capacitors are necessary.This paper focuses on the allocation of EVCS and capacitor installations in RDN by maximizing net present value(NPV),considering the reduction in energy losses and interruption costs.As a part of the analysis considering reliability,several compensation coefficients are used to evaluate failure rates and pinpoint those that will improve NPV.To locate the best nodes for EVCSs and capacitors,the hybrid of grey wolf optimization(GWO)and particle swarm optimization(PSO)(HGWO_PSO)and the hybrid of PSO and Cuckoo search(CS)(HPSO_CS)algorithms are proposed,forming a combination of GWO,PSO,and CS optimizations.The impact of EVCSs on NPV is also investigated in this paper.The effectiveness of the proposed optimization algorithms is validated on an IEEE 33-bus RDN.
文摘A new combined model is proposed to obtain predictive data value applied in state estimation for radial power distribution networks. The time delay part of the model is calculated by a recursive least squares algorithm of system identification, which can gradually forget past information. The grey series part of the model uses an equal dimension new information model (EDNIM) and it applies 3 points smoothing method to preprocess the original data and modify remnant difference by GM(1,1). Through the optimization of the coefficient of the model, we are able to minimize the error variance of predictive data. A case study shows that the proposed method achieved high calculation precision and speed and it can be used to obtain the predictive value in real time state estimation of power distribution networks.
文摘With the growing number and capacity of photovoltaic(PV)installations connected to distribution networks,power quality issues related to voltage regulation are becoming relevant problems for power distribution companies and for PV owners.In many countries,like Italy,this has required the revision of the standards concerning the connection to the public distribution network of distributed renewable generation.The new standards require a flexible operation of generation plants that have to be capable to change the active and reactive power dynamically in function of the network parameters(i.e.frequency and network local voltage)in local control or following external commands.Therefore,this paper investigates the use of smart inverter in a critical PV installation,where relevant voltage fluctuations exist.A case study,with real network parameters monitoring data and measurements,is discussed in the paper with the aim of showing how‘smart’features of new inverters can be implemented to increase PV plant integration in low voltage distribution networks.