Finite element model is constructed according to the principle and characteristics of radial-axial large ring rolling technology. Dynamic explicit finite element method is used to simulate the rolling process. An effe...Finite element model is constructed according to the principle and characteristics of radial-axial large ring rolling technology. Dynamic explicit finite element method is used to simulate the rolling process. An effective modeling method of guide roller is proposed. Simulation indicates that high quality ring product could be obtained when rational rotational speed of rollers and feed rate in the radial and axial rolling are assigned.展开更多
Region partition(RP) is the key technique to the finite element parallel computing(FEPC),and its performance has a decisive influence on the entire process of analysis and computation.The performance evaluation index ...Region partition(RP) is the key technique to the finite element parallel computing(FEPC),and its performance has a decisive influence on the entire process of analysis and computation.The performance evaluation index of RP method for the three-dimensional finite element model(FEM) has been given.By taking the electric field of aluminum reduction cell(ARC) as the research object,the performance of two classical RP methods,which are Al-NASRA and NGUYEN partition(ANP) algorithm and the multi-level partition(MLP) method,has been analyzed and compared.The comparison results indicate a sound performance of ANP algorithm,but to large-scale models,the computing time of ANP algorithm increases notably.This is because the ANP algorithm determines only one node based on the minimum weight and just adds the elements connected to the node into the sub-region during each iteration.To obtain the satisfied speed and the precision,an improved dynamic self-adaptive ANP(DSA-ANP) algorithm has been proposed.With consideration of model scale,complexity and sub-RP stage,the improved algorithm adaptively determines the number of nodes and selects those nodes with small enough weight,and then dynamically adds these connected elements.The proposed algorithm has been applied to the finite element analysis(FEA) of the electric field simulation of ARC.Compared with the traditional ANP algorithm,the computational efficiency of the proposed algorithm has been shortened approximately from 260 s to 13 s.This proves the superiority of the improved algorithm on computing time performance.展开更多
The electric field intensity (EFI) is important characteristic quantity for evaluating the internal insulation state of cable joints. Based on finite element method, this paper proposes two EFI research methods, field...The electric field intensity (EFI) is important characteristic quantity for evaluating the internal insulation state of cable joints. Based on finite element method, this paper proposes two EFI research methods, field-circuit coupling method and equivalent circuit method. The average EFI of the inner surface of the outer semi-conducting shield can be calculated from the current in the measuring circuit. The relative error between these two methods is about 15%, which roughly proves the consistency of the two methods. Further practical application research enables online monitoring of cable joints.展开更多
For the studies in the field of high voltage power transmission, this paper has adopted the method of finite element node potential, and put forward two kinds of high pressure sensor-fixture modeling scheme for the se...For the studies in the field of high voltage power transmission, this paper has adopted the method of finite element node potential, and put forward two kinds of high pressure sensor-fixture modeling scheme for the sensor-fixture of the high voltage side, the simulation analysis shows that the sensor-fixture surface should be smooth, and should not appear the conclusion of edges and corners. While through establishing the four clamps assembly optimized model, and simulates the strain gages, fixtures and conductor surface field strength and electric field distribution in the model as a whole in turn, this paper Finally got the optimal size of fixture structure and assembly of each part reasonable location layout.展开更多
Finite element simulations were conducted to study the mechanism of spark plasma sintering. The spark plasma sintering of SiC ceramics was simulated by the Marc software based on the load current curve and temperature...Finite element simulations were conducted to study the mechanism of spark plasma sintering. The spark plasma sintering of SiC ceramics was simulated by the Marc software based on the load current curve and temperature-time curve deserved by SPS experiment. The concept of equivalent radiation coefficient was presented and applied during the simulation. The temperature distribution regularity of SiC ceramics sintered by SPS technology was got by thermal-electrical coupled finite element simulation. The experimental results show that by thermal-electrical coupled finite element analysis, the temperature rising and distribution regularity of nonconductive material can be preferable forecasted in the sintering process of SPS. In the initial stage of the heat preservation, the temperature of the central part of the sample has achieved sintering temperature, but now, the temperature of the sample is not uniform. The temperature for each part of the die is also quite different and the sample temperature in the center is higher than that in the edge. In the end of heat preservation, the central temperature of the sample is 50 ℃higher than the required sintering temperature, and the temperature gap for each part of the die decreases gradually.展开更多
基金Supported by National Natural Science Foundation fro Key Program of China （50335060）
文摘Finite element model is constructed according to the principle and characteristics of radial-axial large ring rolling technology. Dynamic explicit finite element method is used to simulate the rolling process. An effective modeling method of guide roller is proposed. Simulation indicates that high quality ring product could be obtained when rational rotational speed of rollers and feed rate in the radial and axial rolling are assigned.
基金Project(61273187)supported by the National Natural Science Foundation of ChinaProject(61321003)supported by the Foundation for Innovative Research Groups of the National Natural Science Foundation of China
文摘Region partition(RP) is the key technique to the finite element parallel computing(FEPC),and its performance has a decisive influence on the entire process of analysis and computation.The performance evaluation index of RP method for the three-dimensional finite element model(FEM) has been given.By taking the electric field of aluminum reduction cell(ARC) as the research object,the performance of two classical RP methods,which are Al-NASRA and NGUYEN partition(ANP) algorithm and the multi-level partition(MLP) method,has been analyzed and compared.The comparison results indicate a sound performance of ANP algorithm,but to large-scale models,the computing time of ANP algorithm increases notably.This is because the ANP algorithm determines only one node based on the minimum weight and just adds the elements connected to the node into the sub-region during each iteration.To obtain the satisfied speed and the precision,an improved dynamic self-adaptive ANP(DSA-ANP) algorithm has been proposed.With consideration of model scale,complexity and sub-RP stage,the improved algorithm adaptively determines the number of nodes and selects those nodes with small enough weight,and then dynamically adds these connected elements.The proposed algorithm has been applied to the finite element analysis(FEA) of the electric field simulation of ARC.Compared with the traditional ANP algorithm,the computational efficiency of the proposed algorithm has been shortened approximately from 260 s to 13 s.This proves the superiority of the improved algorithm on computing time performance.
文摘The electric field intensity (EFI) is important characteristic quantity for evaluating the internal insulation state of cable joints. Based on finite element method, this paper proposes two EFI research methods, field-circuit coupling method and equivalent circuit method. The average EFI of the inner surface of the outer semi-conducting shield can be calculated from the current in the measuring circuit. The relative error between these two methods is about 15%, which roughly proves the consistency of the two methods. Further practical application research enables online monitoring of cable joints.
文摘For the studies in the field of high voltage power transmission, this paper has adopted the method of finite element node potential, and put forward two kinds of high pressure sensor-fixture modeling scheme for the sensor-fixture of the high voltage side, the simulation analysis shows that the sensor-fixture surface should be smooth, and should not appear the conclusion of edges and corners. While through establishing the four clamps assembly optimized model, and simulates the strain gages, fixtures and conductor surface field strength and electric field distribution in the model as a whole in turn, this paper Finally got the optimal size of fixture structure and assembly of each part reasonable location layout.
基金Funded by the Natural Science Foundation of Hebei Province, China (No.E2012203086)
文摘Finite element simulations were conducted to study the mechanism of spark plasma sintering. The spark plasma sintering of SiC ceramics was simulated by the Marc software based on the load current curve and temperature-time curve deserved by SPS experiment. The concept of equivalent radiation coefficient was presented and applied during the simulation. The temperature distribution regularity of SiC ceramics sintered by SPS technology was got by thermal-electrical coupled finite element simulation. The experimental results show that by thermal-electrical coupled finite element analysis, the temperature rising and distribution regularity of nonconductive material can be preferable forecasted in the sintering process of SPS. In the initial stage of the heat preservation, the temperature of the central part of the sample has achieved sintering temperature, but now, the temperature of the sample is not uniform. The temperature for each part of the die is also quite different and the sample temperature in the center is higher than that in the edge. In the end of heat preservation, the central temperature of the sample is 50 ℃higher than the required sintering temperature, and the temperature gap for each part of the die decreases gradually.
