In this study,a numerical flow model of the fission products(FPs)in the primary loop system of a molten salt reactor(MSR)was established and solved using Mathematica 7.0.The simulation results were compared with those...In this study,a numerical flow model of the fission products(FPs)in the primary loop system of a molten salt reactor(MSR)was established and solved using Mathematica 7.0.The simulation results were compared with those of the ORIGEN-S program in the static burnup mode,and the deviation was found to be less than 10%,which indicates that the results are in good agreement.Furthermore,the FPs distribution in the primary loop system under normal operating conditions of the 2 MW MSR was quantitatively analyzed.In addition,the distribution phenomenon of the FPs under different flow rate conditions was studied.At the end of life,the FPs activity in the core region(including active region,and upper and lower plenum regions)accounted for 77.3%,and that in the hot leg #1,main pump,hot leg #2,heat exchanger,and cold leg region accounted for 1.2%,16.15%,0.99%,2.5%,and 1.9%,respectively,of the total FPs in the primary loop under normal operating conditions.The proportion of FPs in the core decreased with the increase in flow rate in the range of 2.24-22,400 cm^3 s^-1.The established analytical method and conclusions of this study can provide an important basis for radiation safety design of the primary loop,radioactive source management design,thermal-hydraulic safety analysis,and radiochemical analysis of FPs of 2 MW MSRs.展开更多
In this work, the evaluation of natural radioactivity and spontaneous fission rates was performed for 8 nuclides from the natural radioactive 238U, 235U and 232Th decay chains. For this purpose, three samples of struc...In this work, the evaluation of natural radioactivity and spontaneous fission rates was performed for 8 nuclides from the natural radioactive 238U, 235U and 232Th decay chains. For this purpose, three samples of structural materials of the neutrino detector, i.e. aluminum, titanium and glass were analyzed by gamma spectroscopy and by neutron activation analysis to quantify a specific radioactivity of the samples. According to the results of this investigation, glass and aluminum samples have maximum values of the mean uranium concentrations 7.3(7) × 10-4% and 3.1(6) × 10-5%, respectively, while the lowest value for mean concentration of the uranium was found in titanium samples to be 4.7(3) × 10-6%. Aluminum sample had maximum values of the mean thorium concentrations, 2.5(8) × 10-3%, while the lowest value for mean concentration of the thorium was found in titanium samples to be 6.2(3) × 10-7%.展开更多
基金supported by the Chinese Academy of Sciences TMSR Strategic Pioneer Science and Technology Project(No.XDA02010000)The Frontier Science Key Program of Chinese Academy of Sciences(No.QYZDY-SSW-JSC016)
文摘In this study,a numerical flow model of the fission products(FPs)in the primary loop system of a molten salt reactor(MSR)was established and solved using Mathematica 7.0.The simulation results were compared with those of the ORIGEN-S program in the static burnup mode,and the deviation was found to be less than 10%,which indicates that the results are in good agreement.Furthermore,the FPs distribution in the primary loop system under normal operating conditions of the 2 MW MSR was quantitatively analyzed.In addition,the distribution phenomenon of the FPs under different flow rate conditions was studied.At the end of life,the FPs activity in the core region(including active region,and upper and lower plenum regions)accounted for 77.3%,and that in the hot leg #1,main pump,hot leg #2,heat exchanger,and cold leg region accounted for 1.2%,16.15%,0.99%,2.5%,and 1.9%,respectively,of the total FPs in the primary loop under normal operating conditions.The proportion of FPs in the core decreased with the increase in flow rate in the range of 2.24-22,400 cm^3 s^-1.The established analytical method and conclusions of this study can provide an important basis for radiation safety design of the primary loop,radioactive source management design,thermal-hydraulic safety analysis,and radiochemical analysis of FPs of 2 MW MSRs.
文摘In this work, the evaluation of natural radioactivity and spontaneous fission rates was performed for 8 nuclides from the natural radioactive 238U, 235U and 232Th decay chains. For this purpose, three samples of structural materials of the neutrino detector, i.e. aluminum, titanium and glass were analyzed by gamma spectroscopy and by neutron activation analysis to quantify a specific radioactivity of the samples. According to the results of this investigation, glass and aluminum samples have maximum values of the mean uranium concentrations 7.3(7) × 10-4% and 3.1(6) × 10-5%, respectively, while the lowest value for mean concentration of the uranium was found in titanium samples to be 4.7(3) × 10-6%. Aluminum sample had maximum values of the mean thorium concentrations, 2.5(8) × 10-3%, while the lowest value for mean concentration of the thorium was found in titanium samples to be 6.2(3) × 10-7%.
