Based on gradient wind equations, including frictional force, and considering the effect of the movement of a tropical cyclone on wind speed, the Fujita Formula is improved and further simplified, and the numerical sc...Based on gradient wind equations, including frictional force, and considering the effect of the movement of a tropical cyclone on wind speed, the Fujita Formula is improved and further simplified, and the numerical scheme for calculating the maximum wind speed radius and wind velocity distribution of a moving tropical cyclone is derived. In addition, the effect of frictional force on the internal structure of the tropical cyclone is discussed. By comparison with observational data, this numerical scheme demonstrates great advantages, i.e. it can not only describe the asymmetrical wind speed distribution of a tropical cyclone reasonably, but can also calculate the maximum wind speed in each direction within the typhoon domain much more accurately. Furthermore, the combination of calculated and analyzed wind speed distributions by the scheme is perfectly consistent with observations.展开更多
Commercially available wind-turbines are optimized to operate at certain wind velocity, known as rated wind velocity. For other values of wind velocity, it has different output which is lower than the rated output of ...Commercially available wind-turbines are optimized to operate at certain wind velocity, known as rated wind velocity. For other values of wind velocity, it has different output which is lower than the rated output of the wind plant. Wind mill can be designed to provide maximum power output at different wind velocities through modification of swept area to match with the wind speed available at the moment. This can result in higher power output at all the velocities except that at rated wind speed because of limitation of generator. This results in increased utilization of generation capacity of wind mill compared to its commercially designed counterpart. A theoretical simulation has been done to prove a new concept about swept area of wind turbine blade which results in a significant increase in the power output through the year. Simulation results of power extracted through normal wind blade design and new concept are studied and compared. The findings of the study are presented in graphical and tabular form. Study establishes that there can be a significant gain in the power output with the new concept.展开更多
针对台风数值预报中由于采用对称模型而导致预报误差的现实,通过引入非对称分布的台风最大风速、最大风速半径等因子,在得到台风报告中7级风和10级风的半径的基础上,利用最佳权系数方案来得到非对称的台风外围风速分布因子,从而对Chan a...针对台风数值预报中由于采用对称模型而导致预报误差的现实,通过引入非对称分布的台风最大风速、最大风速半径等因子,在得到台风报告中7级风和10级风的半径的基础上,利用最佳权系数方案来得到非对称的台风外围风速分布因子,从而对Chan and Williams 1987年提出的切向风廓线方案进行改造,进而得到了台风海面非对称风场的计算式。检验表明,该方法能够描述台风海面风场的非对称分布,具有较好的应用前景。展开更多
由于海洋业务化预报模式对中尺度涡等海洋中、小尺度物理过程的准确预报仍然具有较大困难,因此,区域台风—海洋耦合模式初始化采用稳定基态的海洋数据是当前的有效手段。本文通过对两组台风个例的模拟,检验了基于稳定基态海洋数据的区...由于海洋业务化预报模式对中尺度涡等海洋中、小尺度物理过程的准确预报仍然具有较大困难,因此,区域台风—海洋耦合模式初始化采用稳定基态的海洋数据是当前的有效手段。本文通过对两组台风个例的模拟,检验了基于稳定基态海洋数据的区域台风—海洋耦合模式的模拟效果,并通过6组敏感性试验,研究了初始台风最大风速半径(Radius of maximum wind speed,RMWS)对耦合模式模拟结果的影响。结果表明:初始台风RMWS的影响贯穿整个模拟阶段,RMWS越大,下垫面热通量输送量级越大,台风强度越强。在台风强烈的风场作用下,海温反馈也越显著,从而引起热通量降低幅度增大。RMWS作为与台风结构密切相关的物理量在度量台风强度中起到了重要作用。展开更多
基金supported by the National Natural Science Foundation of China (NSFC) under Grant Nos. 40425009 and 40730953
文摘Based on gradient wind equations, including frictional force, and considering the effect of the movement of a tropical cyclone on wind speed, the Fujita Formula is improved and further simplified, and the numerical scheme for calculating the maximum wind speed radius and wind velocity distribution of a moving tropical cyclone is derived. In addition, the effect of frictional force on the internal structure of the tropical cyclone is discussed. By comparison with observational data, this numerical scheme demonstrates great advantages, i.e. it can not only describe the asymmetrical wind speed distribution of a tropical cyclone reasonably, but can also calculate the maximum wind speed in each direction within the typhoon domain much more accurately. Furthermore, the combination of calculated and analyzed wind speed distributions by the scheme is perfectly consistent with observations.
文摘Commercially available wind-turbines are optimized to operate at certain wind velocity, known as rated wind velocity. For other values of wind velocity, it has different output which is lower than the rated output of the wind plant. Wind mill can be designed to provide maximum power output at different wind velocities through modification of swept area to match with the wind speed available at the moment. This can result in higher power output at all the velocities except that at rated wind speed because of limitation of generator. This results in increased utilization of generation capacity of wind mill compared to its commercially designed counterpart. A theoretical simulation has been done to prove a new concept about swept area of wind turbine blade which results in a significant increase in the power output through the year. Simulation results of power extracted through normal wind blade design and new concept are studied and compared. The findings of the study are presented in graphical and tabular form. Study establishes that there can be a significant gain in the power output with the new concept.
文摘针对台风数值预报中由于采用对称模型而导致预报误差的现实,通过引入非对称分布的台风最大风速、最大风速半径等因子,在得到台风报告中7级风和10级风的半径的基础上,利用最佳权系数方案来得到非对称的台风外围风速分布因子,从而对Chan and Williams 1987年提出的切向风廓线方案进行改造,进而得到了台风海面非对称风场的计算式。检验表明,该方法能够描述台风海面风场的非对称分布,具有较好的应用前景。
文摘由于海洋业务化预报模式对中尺度涡等海洋中、小尺度物理过程的准确预报仍然具有较大困难,因此,区域台风—海洋耦合模式初始化采用稳定基态的海洋数据是当前的有效手段。本文通过对两组台风个例的模拟,检验了基于稳定基态海洋数据的区域台风—海洋耦合模式的模拟效果,并通过6组敏感性试验,研究了初始台风最大风速半径(Radius of maximum wind speed,RMWS)对耦合模式模拟结果的影响。结果表明:初始台风RMWS的影响贯穿整个模拟阶段,RMWS越大,下垫面热通量输送量级越大,台风强度越强。在台风强烈的风场作用下,海温反馈也越显著,从而引起热通量降低幅度增大。RMWS作为与台风结构密切相关的物理量在度量台风强度中起到了重要作用。
