Comparison of performance between rescaled range analysis and rescaled variance analysis in detecting abrupt dynamic change

In the present paper, a comparison of the performance between moving cutting data-rescaled range analysis （MC- R/S） and moving cutting data-rescaled variance analysis （MC-V/S） is made. The results clearly indicate that the operating efficiency of the MC-R/S algorithm is higher than that of the MC-V/S algorithm. In our numerical test, the computer time consumed by MC-V/S is approximately 25 times that by MC-R/S for an identical window size in artificial data. Except for the difference in operating efficiency, there are no significant differences in performance between MC-R/S and MC-V/S for the abrupt dynamic change detection. Mc-R/s and MC-V/S both display some degree of anti-noise ability. However, it is important to consider the influences of strong noise on the detection results of MC-R/S and MC-V/S in practical application

Numerical analysis of factors affecting the range of heat transfer in earth surrounding three subways

In order to examine the factors which affect the range of heat transfer in earth surrounding subways, FLAC3D was adopted in this study to analyze these factors, under different conditions, in a systematic manner. When we compare these numerical tests, the results show that the main factors, affecting the heat transfer range are the thermal properties of the surrounding earth, the initial ground temperature and the temperature in the tunnel. The heat transfer coefficient between air and linings has little effect on the temperature distribution around the tunnel. The current results can provide a reference for improving the thermal environment in subways and optimizing the design of subwav ventilation and air conditioning.

Spontaneous combustion influenced by surface methane drainage and its prediction by rescaled range analysis

This study established numerical modeling using COMSOLTMto examine the influence of horizontal location and drainage ability of surface borehole on spontaneous combustion in longwall working face gob. Rescaled Range Analysis(R/S analysis) was employed to investigate the chaos characteristic of N_2/O_2 ratio from a surface borehole in 10416 working face gob, Yangliu Colliery, China. The simulation results show that there is always a circular ‘‘dissipation zone" around the drainage borehole and an elliptic ‘‘spontaneous combustion zone" in deep gob. Little influence was found on spontaneous combustion zone on the intake side of the gob but the width of spontaneous combustion zone in middle gob is enlarged, while the depth of spontaneous combustion zone near the return side is reduced. The R/S analysis indicates that the influence of surface borehole on spontaneous combustion can be divided into two stages by the chaos feature of N_2/O_2: safety drainage stage and spontaneous combustion initiating stage. It can be concluded that the methane drainage from gob through surface borehole can intervene in the distribution of spontaneous combustion zone in gob and the chaos feature of N_2/O_2 from surface borehole can effectively reflect coal spontaneous combustion condition in gob.

An rescaled range analysis on the characteristics of coal seam development in the Eastern depression of the Liaohe Basin

The characteristics of coal seam development,and the prospects of a favorable coal-forming area,were evaluated for the Liaohe Basin located in China.The Number 3 and Number 9 coal seam thickness series from 60 nearly equally spaced bores in the Eastern depression of the Liaohe Basin were examined by a rescaled range analysis.The results indicate that the Hurst exponents of the Number 3 and Number 9 coal seam thickness series are 0.69 and 0.68,respectively.This suggests the presence of persistence.As the bore spacing increases the Hurst exponent of the Number 3 series gradually decreases（H changes from 0.69 to 0.52） and shifts from persistence to randomness.The Hurst exponent of the Number 9 thickness data gradually increases（H changes from 0.68 to 0.91） and always shows the characteristic of persistence.A combination of geological characteristics and the series data allow the conclusion that it is more suitable for the Number 9 coal seam to form in the Northeastern part of the Eastern depression than the Number 3 coal seam.

Effect of Modeling Range on Structural Analysis for Powerhouse of Hydroelectric Power Plant by FEM

In this paper,three different modeling ranges were selected in the structural analysis for a hydropower house.The analysis was carried out using ABAQUS 6.6.The modeling range has a remarkable effect on finite element method(FEM) calculation result at the middle position of typical cross-sections where the concrete is relatively thin,and at the region close to turbine floor.If the ventilation barrel,floor slabs and columns above turbine floor are excluded from FEM model,the maximum rise difference of pedestal structure increases by about 24% compared with that of the whole model.It is indicated that different modeling ranges indeed affect FEM calculation result,and the structure above turbine floor in the FEM model should be included.

Full－range nonlinear analysis of fatigue behaviors of reinforced concrete structures by finite element method

The offshore reinforced concrete structures are always subject to cyclic load, such as wave load.In this paper a new finite element analysis model is developed to analyze the stress and strain state of reinforced concrete structures including offshore concrete structures, subject to any number of the cyclic load. On the basis of the anal ysis of the experimental data,this model simplifies the number of cycles-total cyclic strain curve of concrete as three straight line segments,and it is assumed that the stress-strain curves of different cycles in each segment are the same, thus the elastoplastic analysis is only needed for the first cycle of each segment, and the stress or strain corresponding to any number of cycles can be obtained by superposition of stress or strain obtained by the above e lastoplastic analysis based on the cyclic numbers in each segment.This model spends less computer time,and can obtain the stress and strain states of the structures after any number of cycles.The endochronic-damage and ideal offshore concrete platform subject to cyclic loading are experimented and analyzed by the finite element method based on the model proposed in this paper. The results between the experiment and the finite element analysis are in good agreement,which demonstrates the validity and accuracy of the proposed model.

Analysis and Optimization of Key Dimensions of Co-Axial Dual-Mechanical-Port Flux-Switching Permanent Magnet Machines for Fuel-Based Extended Range Electric Vehicles

In this paper,key dimensions of a co-axial dual-mechanical-port flux-switching permanent magnet(CADMP-FSPM)machine for fuel-based extended range electric vehicles(ER-EVs),including split ratio,stator/rotor pole arcs,rotor yoke thickness,etc.,are analyzed and optimized.Firstly,the topologies and operation principles of an exampled 3-phase CADMP-FSPM are introduced briefly,in which an inner-rotor FSPM machine with 12-stator-slots/10-rotor-poles for high-speed generation and an outer-rotor FSPM machine with 12-stator-slots/22-rotor-poles for low-speed motoring are assembled co-axially.Then,the relationship between the key dimensions and electromagnetic performance,particularly for electromagnetic torque(power),of the CADMP-FSPM machine is studied by 2D-finite element analysis(FEA).Further,the reasonable matches of split ratio,rotor/stator pole arcs and rotor yoke are determined and the original CADMP-FSPM machine is optimized correspondingly.Finally,the static characteristics,including no-load PM flux-linkage,electro-motive-force(EMF),winding inductances,cogging torques and electromagnetic torques,of the original and optimized machines are compared by 2D-FEA.The results verify that the optimized CADMP-FSPM machine can exhibit improved torque characteristics than the original one,i.e.,the torque ripples of the inner and outer machines can be reduced by 22.7%and 4.7%,respectively,and the average torque of the inner and outer machines can be increased by 0.43Nm and 2Nm,respectively.

Long-range correlation analysis of urban traffic data

This paper investigates urban traffic data by analysing the long-range correlation with detrended fluctuation analysis. Through a large number of real data collected by the travel time detection system in Beijing, the variation of flow in different time periods and intersections is studied. According to the long-range correlation in different time scales, it mainly discuss the effect of intersection location in road net, people activity customs and special traffic controls on urban traffic flow. As demonstrated by obtained results, the urban traffic flow represents three-phase characters similar to highway traffic. Moreover, compared by the two groups of data obtained before and after the special traffic restrictions （vehicles with special numbered plates only run in a special workday） enforcement, it indicates that the rules not only reduce the flow but also avoid irregular fluctuation.

Cloning and Sequence Analysis of ras Promoter from Auricuralia auricular Strain YBS-3

[Objective] The ras promoters were cloned from genomic DNA of Auricuralia auricular so as to provide promoters for breeding better species by genetic technology. [Method] PCR was used to clone promoters with the genomic DNA of A. auricular strain YBS-3 as template,and then the sequences of four ras promoters were obtained. The analysis of promoter sequences was made by three promoter analysis software：Promoter prediction,Place and TFSEARCH ver.1.3. [Result] Four fragments contained core elements of promoter including TATA-box and CAAT-box,and many other important cis-elements such as GATA BOX,GCGC BOX,CCAAT BOX1,etc. At the same time,there was at least one transcriptional start site in these sequences. And several transcription factor binding sites were detected in these sequences. [Conclusion] Four promoter fragments all had promoter function theoretically.

Vegetation-environment relationships in the forests of Chitral district Hindukush range of Pakistan

We investigated the composition of plant communities to quantify their relationships with environmental parameters in the Chitral Hindukush range of Pakistan. We sampled tree vegetation using the Point Centered Quarter （PCQ） method while understory vegetation was sampled in 1.5-m circular quadrats. Cedrus deodara is the national symbol of Pakistan and was dominant in the sampled communities. Because environmental variables determine vegetation types, we analyzed and evaluated edaphic and topographic factors. DCA-Ordination showed the major gradient as an amalgam of elevation （p〈0.05） and slope （p〈0.01） as the topographic factors correlated with species distribution. Soil variables were the factors of environmental significance along DCA axes. However, among these factors, Mg2＋ , K ＋ and N2＋ contributed not more than 0.054% 0.20% and 0.073%, respectively, to variation along the first ordination axis. We conclude that the principal reason for weak or no correlation with many edaphic variables was the anthropogenic disturbance of vegetation. The understory vegetation was composed of perennial herbs in most communities and was most dense under the tree canopy. The understory vegetation strongly regulates tree seedling growth and regeneration patterns. We recommend further study of the understory vegetation using permanent plots to aid development of forest regeneration strategies.

Effects of physical parameter range on dimensionless variable sensitivity in water flooding reservoirs

The similarity criterion for water flooding reservoir flows is concerned with in the present paper. When finding out all the dimensionless variables governing this kind of flow, their physical meanings are subsequently elucidated. Then, a numerical approach of sensitivity analysis is adopted to quantify their corresponding dominance degree among the similarity parameters. In this way, we may finally identify major scaling law in different parameter range and demonstrate the respective effects of viscosity, permeability and injection rate.

Statistic Analysis on Quantitative Characteristics for Developing the DUS Test Guideline of Ranunculus asiaticus L.

Selection of quantitative characteristics, division of their expression ranges, and selection of example varieties are key issues on developing DUS Test Guidelines, which are more crucial for quantitative characteristics since their expressions vary in different degrees. Taking the development of DUS Test Guideline of Ranunculus asiaticus L. as an example, this paper applied statistic-based approaches for the analyses of quantitative characteristics. We selected 9 quantitative characteristics from 18 pre-selected characteristics, based on within-variety uniformity, stability between different growing cycles, and correlation among characteristics, by the analyses of coefficient of variation, paired-samples t-test and partial correlation. The expression ranges of the 9 selected quantitative characteristics were divided into different states using descriptive statistics and distribution frequency of varieties. Eight of the 9 selected quantitative characteristics were categorized as standard characteristics as they showed one peak in distribution frequency of 120 varieties in various expressions of the characteristics, whereas, plant height can be categorized as grouping characteristic since it gave two peaks, and can group the varieties into pot and cut varieties. Finally, box-plot was applied to visually select the example varieties, and varieties 7, 12, and 28 were determined as the example varieties for plant height. The methods described in this paper are effective for the selection of quantitative characteristics, division of expression ranges, and selection of example varieties in Ranunculus asiaticus L. for DUS test, and may also be interest for other plant genera.

Analysis of the Flow Field and Impact Force in High-Pressure Water Descaling

This study aims to improve the performances of the high-pressure water descaling technology used in steel hot rolling processes.In particular,a 2050 mm hot rolling line is considered,and the problem is investigated by means of a fluid–structure interaction(FSI)method by which the descaling effect produced by rolling coils with different section sizes is examined.Assuming a flat fan-shaped nozzle at the entrance of the R1R2 roughing mill,the outflow field characteristics and the velocity distribution curve on the strike line(at a target distance of 30–120 mm)are determined.It is found that the velocity in the center region of the water jet with different target distances is higher than that in the boundary region.As the target distance increases,the velocity of the water jet in the central region decreases.Through comparison with experimental results,it is shown that the simulation model can accurately predict the impact position of the high-pressure water on the impact plate,thereby providing a computational scheme that can be used to optimize the nozzle space layout and improve the slabs’descent effect for different rolling specifications.

Constraint and Mobility Change Analysis of Rubik’s Cube-inspired Reconfigurable Joints and Corresponding Parallel Mechanisms

The current research of reconfigurable parallel mechanism mainly focuses on the construction of reconfigurable joints.Compared with the method of changing the mobility by physical locking joints,the geometric constraint has good controllability,and the constructed parallel mechanism has more configurations and wider application range.This paper presents a reconfigurable axis(rA)joint inspired and evolved from Rubik’s Cubes,which have a unique feature of geometric and physical constraint of axes of joint.The effectiveness of the rA joint in the construction of the limb is analyzed,resulting in a change in mobility and topology of the parallel mechanism.The rA joint makes the angle among the three axes inside the groove changed arbitrarily.This change in mobility is completed by the case illustrated by a 3(rA)P(rA)reconfigurable parallel mechanism having variable mobility from 1 to 6 and having various special configurations including pure translations,pure rotations.The underlying principle of the metamorphosis of this rA joint is shown by investigating the dependence of the corresponding screw system comprising of line vectors,leading to evolution of the rA joint from two types of spherical joints to three types of variable Hooke joints and one revolute joint.The reconfigurable parallel mechanism alters its topology by rotating or locking the axis of rA joint to turn all limbs into different phases.The prototype of reconfigurable parallel mechanism is manufactured and all configurations are enumerated to verify the validity of the theoretical method by physical experiments.

Association between Helicobacter pylori infection and migraine: A meta-analysis

AIM: To quantify the association between Helicobacter pylori (H. pylori) infection and migraine.

Diagnostic accuracy of K-ras mutation for pancreatic carcinoma:a meta-analysis

BACKGROUND:The conventional tests for the diagnosis of early stage pancreatic carcinoma are not acceptable.This metaanalysis is to evaluate the accuracy of K-ras mutation for the diagnosis of pancreatic carcinoma.DATA SOURCES:A systemic search of all relevant literature was performed in Web of Science,EMBASE,Cochrane Database,and MEDLINE(PubMed as the search engine) prior to June 1,2011.Thirty-four studies fulfilled the inclusion criteria and data were pooled for analysis.RESULTS:The pooled estimates for K-ras mutation in diagnosis of pancreatic carcinoma were as follows:sensitivity 0.68(95% CI:0.66-0.71),specificity 0.87(95% CI:0.85-0.88),positive likelihood ratio 4.54(95% CI:3.47-5.94),negative likelihood ratio 0.37(95% CI:0.30-0.44) and diagnostic odds ratio 14.90(95% CI:10.02-22.15).Summary receiver operating characteristic analysis demonstrated that the maximum joint sensitivity and specificity was 0.79,and the overall area under the curve was 0.86.CONCLUSIONS:Diagnostic accuracy of K-ras mutation was not superior to that of conventional tests.Therefore,K-ras mutation analysis alone is not recommended for the diagnosis of pancreatic carcinoma.

A Dam Break Analysis Using HEC-RAS

This paper firstly described the dam break in the aspects of theories and models. Break parameters prediction, the understanding of dam break mechanics, peak outflow prediction were shown as the essential for the dam break analysis, and eventually determined the loss of the damages. Secondly, as an application example, Foster Joseph Sayers Dam break was further modeled and analyzed using USACE Hydrologic Engineering Center’s River Analysis System (HEC-RAS) model based on available geometry data. The results show that dam break is a complicated and comprehensive process involving lots of principles. Combination of mechanics and case studies, reflection of predominant mechanisms of headcut erosion, more specific categorization of dam, prudent investigation and inference of dam break process are needed in developing a satisfactory dam break simulation model. Foster Joseph Sayers Dam break due to piping elongates the time period of high water surface level, which increases the duration of risk. However, the dam break does not increase the downstream maximum water surface elevation (Max. W.S. Elev) significantly at previous design Probable Maximum Flood (PMF). Dam break has a greater impact on the downstream location where is closer to the dam in accordance with the comparison of the hydrographs at different downstream locations. Sensitivity analysis demonstrates that the changes of dam break parameters had no much influence on the downstream Max. W.S. Elev.

A generic analysis of English Research Article abstracts and the use of modal verbs for financial economics

This paper is a generic study of schematic structures and the use of modal verbs of 50 English Research Article （RA） abstracts. With Bhatia＇s （1990） model as the framework, three other move patterns were obtained besides the normal move order. The density of modal verbs varies greatly from move to move with significant differences in the frequency of occurrence in different moves. The use of modal verbs is much more move-determined than discipline-determined.

Investigation of an Intensifying-flux Variable Flux-leakage Interior Permanent Magnet Machine for Wide Speed Range

In this paper,a novel intensifying-flux variable flux-leakage interior permanent magnet(IFVF-IPM)machine is proposed,in which flux barriers were designed deliberately between the adjacent poles to obtain intensifying-flux effect and variable flux-leakage property.The rotor topology and design principles of the proposed machine are also introduced.Then,a multi-objective optimization method is adopted based on the sensitivity analysis,and some design variables of IFVF-IPM machine with strong sensitivity are selected to optimization progress by using the non-dominated sorting genetic algorithm-Ⅱ(NSGA-Ⅱ).Moreover,the electromagnetic characteristics of conventional IPM machine,conventional IFVF-IPM machine(CIFVF-IPM)and the novel IFVF-IPM machine are compared based on the finite element analysis(FEA)method which includes flux linkage,inductances characteristic,torque-speed envelops and power characteristic,as well as evaluation of the risk of irreversible demagnetization.Finally,the experiment results show that the IFVF-IPM machine has a better performance in flux weakening capability for wide speed range and a lower risk of irreversible demagnetization,which indicates the validity and feasibility of the proposed machine.

A NEW METHOD FOR PREDICTING TROPOSPHERIC RANGE ERROR

Based on the quasi-measured values of tropospheric refraction,the relation betweenand △R as expressed in Eq.(3)is proved,and according to the stable feature of refractivityat 9 km above sea level,a simplified method for predicting tropospheric range error is analysed.Some new parameters for linear regression analysis of tropospheric range error are given also.