An Optimal Node Localization in WSN Based on Siege Whale Optimization Algorithm

Localization or positioning scheme in Wireless sensor networks (WSNs) is one of the most challenging andfundamental operations in various monitoring or tracking applications because the network deploys a large areaand allocates the acquired location information to unknown devices. The metaheuristic approach is one of themost advantageous ways to deal with this challenging issue and overcome the disadvantages of the traditionalmethods that often suffer from computational time problems and small network deployment scale. This studyproposes an enhanced whale optimization algorithm that is an advanced metaheuristic algorithm based on thesiege mechanism (SWOA) for node localization inWSN. The objective function is modeled while communicatingon localized nodes, considering variables like delay, path loss, energy, and received signal strength. The localizationapproach also assigns the discovered location data to unidentified devices with the modeled objective functionby applying the SWOA algorithm. The experimental analysis is carried out to demonstrate the efficiency of thedesigned localization scheme in terms of various metrics, e.g., localization errors rate, converges rate, and executedtime. Compared experimental-result shows that theSWOA offers the applicability of the developed model forWSNto perform the localization scheme with excellent quality. Significantly, the error and convergence values achievedby the SWOA are less location error, faster in convergence and executed time than the others compared to at least areduced 1.5% to 4.7% error rate, and quicker by at least 4%and 2% in convergence and executed time, respectivelyfor the experimental scenarios.

An efficient range-free localization algorithm for wireless sensor networks

Node positioning is a fundamental problem in applications of wireless sensor networks (WSNs). In this paper, a new range-free algorithm, called spring swarm localization algorithm (SSLA), is proposed for positioning WSNs. To determine the locations of sensor nodes, the proposed algorithm uses network topology information and a small fraction of sensor nodes which know their locations. Numerical simulations show that high positioning accuracy can be obtained by using the algorithm. Some examples are given to illustrate the effectiveness of the algorithm.

LSDA-APF:A Local Obstacle Avoidance Algorithm for Unmanned Surface Vehicles Based on 5G Communication Environment

In view of the complex marine environment of navigation,especially in the case of multiple static and dynamic obstacles,the traditional obstacle avoidance algorithms applied to unmanned surface vehicles(USV)are prone to fall into the trap of local optimization.Therefore,this paper proposes an improved artificial potential field(APF)algorithm,which uses 5G communication technology to communicate between the USV and the control center.The algorithm introduces the USV discrimination mechanism to avoid the USV falling into local optimization when the USV encounter different obstacles in different scenarios.Considering the various scenarios between the USV and other dynamic obstacles such as vessels in the process of performing tasks,the algorithm introduces the concept of dynamic artificial potential field.For the multiple obstacles encountered in the process of USV sailing,based on the International Regulations for Preventing Collisions at Sea(COLREGS),the USV determines whether the next step will fall into local optimization through the discriminationmechanism.The local potential field of the USV will dynamically adjust,and the reverse virtual gravitational potential field will be added to prevent it from falling into the local optimization and avoid collisions.The objective function and cost function are designed at the same time,so that the USV can smoothly switch between the global path and the local obstacle avoidance.The simulation results show that the improved APF algorithm proposed in this paper can successfully avoid various obstacles in the complex marine environment,and take navigation time and economic cost into account.

A Review and Analysis of Localization Techniques in Underwater Wireless Sensor Networks

In recent years,there has been a rapid growth in Underwater Wireless Sensor Networks(UWSNs).The focus of research in this area is now on solving the problems associated with large-scale UWSN.One of the major issues in such a network is the localization of underwater nodes.Localization is required for tracking objects and detecting the target.It is also considered tagging of data where sensed contents are not found of any use without localization.This is useless for application until the position of sensed content is confirmed.This article’s major goal is to review and analyze underwater node localization to solve the localization issues in UWSN.The present paper describes various existing localization schemes and broadly categorizes these schemes as Centralized and Distributed localization schemes underwater.Also,a detailed subdivision of these localization schemes is given.Further,these localization schemes are compared from different perspectives.The detailed analysis of these schemes in terms of certain performance metrics has been discussed in this paper.At the end,the paper addresses several future directions for potential research in improving localization problems of UWSN.

An Improved DV-Hop Localization Algorithm Based on Hop Distances Correction

DV-Hop localization algorithm has greater localization error which estimates distance from an unknown node to the different anchor nodes by using estimated average size of a hop to achieve the location of the unknown node.So an improved DV-Hop localization algorithm based on correctional average size of a hop,HDCDV-Hop algorithm,is proposed.The improved algorithm corrects the estimated distance between the unknown node and different anchor nodes based on fractional hop count information and relatively accurate coordinates of the anchor nodes information,and it uses the improved Differential Evolution algorithm to get the estimate location of unknown nodes so as to further reduce the localization error.Simulation results show that our proposed algorithm have lower localization error and higher localization accuracy compared with the original DV-Hop algorithm and other classical improved algorithms.

A Localization Algorithm Using a Mobile Anchor Node Based on Region Determination in Underwater Wireless Sensor Networks

At present, most underwater positioning algorithms improve the positioning accuracy by increasing the number of anchor nodes which resulting in the increasing energy consumption. To solve this problem, the paper proposes a localization algorithm assisted by mobile anchor node and based on region determination(LMRD), which not only improves the positioning accuracy of nodes positioning but also reduces the energy consumption. This algorithm is divided into two stages: region determination stage and location positioning stage. In the region determination stage, the target region is divided into several sub-regions by the region division strategy with the smallest overlap rate which can reduce the number of virtual anchor nodes and lock the target node to a sub-region, and then through the planning of mobile nodes to optimize the travel path, reduce the moving distance, and reduce system energy consumption. In the location positioning stage, the target node location can be calculated using the HILBERT path planning and trilateration. The simulation results show that the proposed algorithm can improve the positioning accuracy when the energy consumption is reduced.

High speed robust image registration and localization using optimized algorithm and its performances evaluation

Local invariant algorithm applied in downward-looking image registration,usually computes the camera＇s pose relative to visual landmarks.Generally,there are three requirements in the process of image registration when using these approaches.First,the algorithm is apt to be influenced by illumination.Second,algorithm should have less computational complexity.Third,the depth information of images needs to be estimated without other sensors.This paper investigates a famous local invariant feature named speeded up robust feature（SURF）,and proposes a highspeed and robust image registration and localization algorithm based on it.With supports from feature tracking and pose estimation methods,the proposed algorithm can compute camera poses under different conditions of scale,viewpoint and rotation so as to precisely localize object＇s position.At last,the study makes registration experiment by scale invariant feature transform（SIFT）,SURF and the proposed algorithm,and designs a method to evaluate their performances.Furthermore,this study makes object retrieval test on remote sensing video.For there is big deformation on remote sensing frames,the registration algorithm absorbs the Kanade-Lucas-Tomasi（KLT） 3-D coplanar calibration feature tracker methods,which can localize interesting targets precisely and efficiently.The experimental results prove that the proposed method has a higher localization speed and lower localization error rate than traditional visual simultaneous localization and mapping（vSLAM） in a period of time.

Reach Centroid Localization Algorithm

As much as accurate or precise position estimation is always desirable, coarse accuracy due to sensor node localization is often sufficient. For such level of accuracy, Range-free localization techniques are being explored as low cost alternatives to range based localization techniques. To manage cost, few location aware nodes, called anchors are deployed in the wireless sensor environment. It is from these anchors that all other free nodes are expected to estimate their own positions. This paper therefore, takes a look at some of the foremost Range-free localization algorithms, detailing their limitations, with a view to proposing a modified form of Centroid Localization Algorithm called Reach Centroid Localization Algorithm. The algorithm employs a form of anchor nodes position validation mechanism by looking at the consistency in the quality of Received Signal Strength. Each anchor within the vicinity of a free node seeks to validate the actual position or proximity of other anchors within its vicinity using received signal strength. This process mitigates multipath effects of radio waves, particularly in an enclosed environment, and consequently limits localization estimation errors and uncertainties. Centroid Localization Algorithm is then used to estimate the location of a node using the anchors selected through the validation mechanism. Our approach to localization becomes more significant, particularly in indoor environments, where radio signal signatures are inconsistent or outrightly unreliable. Simulated results show a significant improvement in localization accuracy when compared with the original Centroid Localization Algorithm, Approximate Point in Triangulation and DV-Hop.

RSSI-based Algorithm for Indoor Localization

Wireless node localization is one of the key technologies for wireless sensor networks. Outdoor localization can use GPS, AGPS (Assisted Global Positioning System) [6], but in buildings like supermarkets and underground parking, the accuracy of GPS and even AGPS will be greatly reduced. Since Indoor localization requests higher accuracy, using GPS or AGPS for indoor localization is not feasible in the current view. RSSI-based trilateral localization algorithm, due to its low cost, no additional hardware support, and easy-understanding, it becomes the mainstream localization algorithm in wireless sensor networks. With the development of wireless sensor networks and smart devices, the number of WIFI access point in these buildings is increasing, as long as a mobile smart device can detect three or three more known WIFI hotspots’ positions, it would be relatively easy to realize self-localization (Usually WIFI access points locations are fixed). The key problem is that the RSSI value is relatively vulnerable to the influence of the physical environment, causing large calculation error in RSSI-based localization algorithm. The paper proposes an improved RSSI-based algorithm, the experimental results show that compared with original RSSI-based localization algorithms the algorithm improves the localization accuracy and reduces the deviation.

LOCAL STRUCTURE-PRESERVING ALGORITHMS FOR THE KLEIN-GORDON-ZAKHAROV EQUATION

In this paper, using the concatenating method, a series of local structure-preserving algorithms are obtained for the Klein-Gordon-Zakharov equation, including four multisymplectic algorithms, four local energy-preserving algorithms, four local momentumpreserving algorithms;of these, local energy-preserving and momentum-preserving algorithms have not been studied before. The local structure-preserving algorithms mentioned above are more widely used than the global structure-preserving algorithms, since local preservation algorithms can be preserved in any time and space domains, which overcomes the defect that global preservation algorithms are limited to boundary conditions. In particular, under appropriate boundary conditions, local preservation laws are global preservation laws.Numerical experiments conducted can support the theoretical analysis well.

A Fuzzy Decision Based WSN Localization Algorithm for Wise Healthcare

Wise healthcare is a typical application of wireless sensor network(WSN), which uses sensors to monitor the physiological state of nursing targets and locate their position in case of an emergency situation. The location of targets need to be determined and reported to the control center,and this leads to the localization problem. While localization in healthcare field demands high accuracy and regional adaptability, the information processing mechanism of human thinking has been introduced,which includes knowledge accumulation, knowledge fusion and knowledge expansion. Furthermore, a fuzzy decision based localization approach is proposed. Received signal strength(RSS) at references points are obtained and processed as position relationship indicators, using fuzzy set theory in the knowledge accumulation stage; after that, optimize degree of membership corresponding to each anchor nodes in different environments during knowledge fusion; the matching degree of reference points is further calculated and sorted in decision-making, and the coordinates of several points with the highest matching degree are utilized to estimate the location of unknown nodes while knowledge expansion. Simulation results show that the proposed algorithm get better accuracy performance compared to several traditional algorithms under different typical occasions.

Immune evolutionary algorithms with domain knowledge for simultaneous localization and mapping

Immune evolutionary algorithms with domain knowledge were presented to solve the problem of simultaneous localization and mapping for a mobile robot in unknown environments. Two operators with domain knowledge were designed in algorithms, where the feature of parallel line segments without the problem of data association was used to construct a vaccination operator, and the characters of convex vertices in polygonal obstacle were extended to develop a pulling operator of key point grid. The experimental results of a real mobile robot show that the computational expensiveness of algorithms designed is less than other evolutionary algorithms for simultaneous localization and mapping and the maps obtained are very accurate. Because immune evolutionary algorithms with domain knowledge have some advantages, the convergence rate of designed algorithms is about 44% higher than those of other algorithms.

Analysis of Five Typical Localization Algorithms for Wireless Sensor Networks

In this paper, the self-localization problem is studied. It is one of the key technologies in wireless sensor networks (WSNs). And five localization algorithms: Centroid algorithm, Amorphous algorithm, DV-hop algorithm, APIT algorithm and Bounding Box algorithm are discussed. Simulation of those five localization algorithms is done by MATLAB. The simulation results show that the positioning error of Amorphous algorithm is the minimum. Considering economy and localization accuracy, the Amorphous algorithm can achieve the best localization performance under certain conditions.

Hybrid ToA and IMU indoor localization system by various algorithms

In this paper, we integrate inertial navigation system (INS) with wireless sensor network (WSN) to enhance the accuracy of indoor localization. Inertial measurement unit (IMU), the core of the INS, measures the accelerated and angular rotated speed of moving objects. Meanwhile, the ranges from the object to beacons, which are sensor nodes with known coordinates, are collected by time of arrival (ToA) approach. These messages are simultaneously collected and transmitted to the terminal. At the terminal, we set up the state transition models and observation models. According to them, several recursive Bayesian algorithms are applied to producing position estimations. As shown in the experiments, all of three algorithms do not require constant moving speed and perform better than standalone ToA system or standalone IMU system. And within them, two algorithms can be applied for the tracking on any path which is not restricted by the requirement that the trajectory between the positions at two consecutive time steps is a straight line.

An Improved Underwater Acoustic Network Localization Algorithm

Underwater sensor network can achieve the unmanned environmental monitoring and military monitoring missions.Underwater acoustic sensor node cannot rely on the GPS to position itself,and the traditional indirect positioning methods used in Ad Hoc networks are not fully applicable to the localization of underwater acoustic sensor networks.In this paper,we introduce an improved underwater acoustic network localization algorithm.The algorithm processes the raw data before localization calculation to enhance the tolerance of random noise.We reduce the redundancy of the calculation results by using a more accurate basic algorithm and an adjusted calculation strategy.The improved algorithm is more suitable for the underwater acoustic sensor network positioning.

A Semi-Supervised WLAN Indoor Localization Method Based on l1-Graph Algorithm

For indoor location estimation based on received signal strength( RSS) in wireless local area networks( WLAN),in order to reduce the influence of noise on the positioning accuracy,a large number of RSS should be collected in offline phase. Therefore,collecting training data with positioning information is time consuming which becomes the bottleneck of WLAN indoor localization. In this paper,the traditional semisupervised learning method based on k-NN and ε-NN graph for reducing collection workload of offline phase are analyzed,and the result shows that the k-NN or ε-NN graph are sensitive to data noise,which limit the performance of semi-supervised learning WLAN indoor localization system. Aiming at the above problem,it proposes a l1-graph-algorithm-based semi-supervised learning( LG-SSL) indoor localization method in which the graph is built by l1-norm algorithm. In our system,it firstly labels the unlabeled data using LG-SSL and labeled data to build the Radio Map in offline training phase,and then uses LG-SSL to estimate user's location in online phase. Extensive experimental results show that,benefit from the robustness to noise and sparsity ofl1-graph,LG-SSL exhibits superior performance by effectively reducing the collection workload in offline phase and improving localization accuracy in online phase.

Symmetric Workpiece Localization Algorithms: Convergence and Improvements

Symmetric workpiece localization algorithms combine alternating optimization and linearization. The iterative variables are partitioned into two groups. Then simple optimization approaches can be employed for each subset of variables, where optimization of configuration variables is simplified as a linear least-squares problem (LSP). Convergence of current symmetric localization algorithms is discussed firstly. It is shown that simply taking the solution of the LSP as start of the next iteration may result in divergence or incorrect convergence. Therefore in our enhanced algorithms, line search is performed along the solution of the LSP in order to find a better point reducing the value of objective function. We choose this point as start of the next iteration. Better convergence is verified by numerical simulation. Besides, imposing boundary constraints on the LSP proves to be another efficient way.

Research on localization algorithm of naval vessel for submarine based on bearing-range measurements

Combined with naval vessel practical antisubmarine equipment of towed linear array sonar,a mathematical model of naval vessel localization for submarine based on bearing measurement was built,and localization algorithm was given to solve submarine movement parameters.Localizaiton errors were analyzed.Based on localization model and algorithm,simulations were done to study the effect of factors such as initial distance between submarine and the naval vessel,submarine initial bearing angle measured by the naval vessel and submarine course on localization performance,and then simulation results were given and analyzed.The results have practical value to instruct real antisubmarine.Simulation results show that different target movement situations have great influence on sonar detection and localization performance,so the reasonable choice of sonar position and detection bearing according to the target movement situation can improve sonar detection and localization performance to some degree.