Rapid post-earthquake safety assessment of low-rise reinforced concrete structures

Many countries throughout the world have experienced large earthquakes,which cause building damage or collapse.After such earthquakes,structures must be inspected rapidly to judge whether they are safe to reoccupy.To facilitate the inspection process,the authors previously developed a rapid building safety assessment system using sparse acceleration measurements for steel framed buildings.The proposed system modeled nonlinearity in the measurement data using a calibrated simplified lumped-mass model and convolutional neural networks(CNNs),based on which the buildinglevel damage index was estimated rapidly after earthquakes.The proposed system was validated for a nonlinear 3D numerical model of a five-story steel building,and later for a large-scale specimen of an 18-story building in Japan tested on the E-Defense shaking table.However,the applicability of the safety assessment system for reinforced concrete(RC)structures with complex hysteretic material nonlinearity has yet to be explored;the previous approach based on a simplified lumpedmass model with a Bouc-Wen hysteretic model does not accurately represent the inherent nonlinear behavior and resulting damage states of RC structures.This study extends the rapid building safety assessment system to low-rise RC moment resisting frame structures representing typical residential apartments in Japan.First,a safety classification for RC structures based on a damage index consistent with the current state of practice is defined.Then,a 3D nonlinear numerical model of a two-story moment frame structure is created.A simplified lumped-mass nonlinear model is developed and calibrated using the 3D model,incorporating the Takeda degradation model for the RC material nonlinearity.This model is used to simulate the seismic response and associated damage sensitive features(DSF)for random ground motion.The resulting database of responses is used to train a convolutional neural network(CNN)that performs rapid safety assessment.The developed system is validated using the 3D nonlinear analysis model subjected to historical earthquakes.The results indicate the applicability of the proposed system for RC structures following seismic events.

基于形状因子优化的RAPID算法对CFRP通孔损伤的研究

在传统RAPID算法损伤成像中,形状因子β的设定通常是人为取值,其取值不同,成像的效果也不同,往往存在成像结果分散、分辨率较低的问题,因此提出了一种计算β值的新方法。通过ABAQUS有限元仿真,以CFRP层合板的通孔缺陷为检测对象,将形状因子优化后的RAPID算法与RAPID算法的损伤成像结果进行对比分析。结果表明,形状因子优化后的RAPID算法对缺陷定位结果的集中度更高,更能实现损伤位置的可视化。

Sex-specific facilitation and reproduction of the gynodioecious cushion plant Arenaria polytrichoides on the Himalaya-Hengduan mountains,SW China

When benefiting other beneficiaries,cushion plants may reciprocally receive feedback effects.The feedback effects on different sex morphs,however,remains unclear.In this study,taking the gynodioecious Arenaria polytrichiodes as a model species,we aimed to assess the sex-specific facilitation intensity of cushion plant by measuring the beneficiary cover ratio,and to assess the potential costs in cushion reproductive functions by measuring the flower and fruit cover ratios.The total beneficiary cover ratio was similar between females and hermaphrodites.Females produced much less flowers but more fruits than hermaphrodites.These results suggested that females and hermaphrodites possess similar facilitation intensity,and female cushion A.polytrichoides may allocate more resources saved from pollen production to seed production,while hermaphrodites possibly allocate more resources to pollen production hence reducing seed production.The surface areas covered by beneficiaries produced less flowers and fruits than areas without beneficiaries.In addition,strong negative correlations between beneficiary cover and flower cover were detected for both females and hermaphrodites,but the correlation strength were similar for these two sex morphs.However,the correlation between beneficiary cover and fruit cover was only significantly negative for females,suggesting that beneficiary plants negatively affect fruit reproduction of females while have neutral effects on hermaphrodites.All the results suggest that to facilitate other beneficiaries can induce reproductive costs on cushion A.polytrichoides,with females possibly suffering greater cost than hermaphrodites.Such differentiation in reproductive costs between sex morphs,in long-term perspective,may imply sex imbalance in population dynamics.

Spatio-temporal Evolution Characteristics and Driving Forces of Winter Urban Heat Island:A Case Study of Rapid Urbanization Area of Fuzhou City,China

Under the influence of anthropogenic and climate change,the problems caused by urban heat island(UHI)has become increasingly prominent.In order to promote urban sustainable development and improve the quality of human settlements,it is significant for exploring the evolution characteristics of urban thermal environment and analyzing its driving forces.Taking the Landsat series images as the basic data sources,the winter land surface temperature(LST)of the rapid urbanization area of Fuzhou City in China was quantitatively retrieved from 2001 to 2021.Combing comprehensively the standard deviation ellipse model,profile analysis and GeoDetector model,the spatio-temporal evolution characteristics and influencing factors of the winter urban thermal environment were systematically analyzed.The results showed that the winter LST presented an increasing trend in the study area during 2001–2021,and the winter LST of the central urban regions was significantly higher than the suburbs.There was a strong UHI effect from 2001 to 2021with an expansion trend from the central urban regions to the suburbs and coastal areas in space scale.The LST of green lands and wetlands are significantly lower than croplands,artificial surface and unvegetated lands.Vegetation and water bodies had a significant mitigation effect on UHI,especially in the micro-scale.The winter UHI had been jointly driven by the underlying surface and socio-economic factors in a nonlinear or two-factor interactive enhancement mode,and socio-economic factors had played a leading role.This research could provide data support and decision-making references for rationally planning urban layout and promoting sustainable urban development.

On-site rapid detection of multiple pesticide residues in tea leaves by lateral flow immunoassay

The application of pesticides (mostly insecticides and fungicides) during the tea-planting process will undoubtedly increase the dietary risk associated with drinking tea. Thus, it is necessary to ascertain whether pesticide residues in tea products exceed the maximum residue limits. However, the complex matrices present in tea samples comprise a major challenge in the analytical detection of pesticide residues. In this study, nine types of lateral flow immunochromatographic strips (LFICSs) were developed to detect the pesticides of interest (fenpropathrin, chlorpyrifos, imidacloprid, thiamethoxam, acetamiprid, carbendazim, chlorothalonil, pyraclostrobin, and iprodione). To reduce the interference of tea substrates on the assay sensitivity, the pretreatment conditions for tea samples, including the extraction solvent, extraction time, and purification agent, were optimized for the simultaneous detection of these pesticides. The entire testing procedure (including pretreatment and detection) could be completed within 30 min. The detected results of authentic tea samples were confirmed by ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS), which suggest that the LFICS coupled with sample rapid pretreatment can be used for on-site rapid screening of the target pesticide in tea products prior to their market release.

The life-history trait trade-offs mediated by reproduction and immunity in the brown planthopper,Nilaparvata lugens Stål

Reproduction and immune defense are costly functions,and they are expected to tradeoff with each other to drive evolution.The brown planthopper(BPH),Nilaparvata lugens Stål(Hemiptera,Delphacidae),is a global superpest that mostly damages rice crops.Yeast-like symbionts(YLS)exist in the abdominal fat body tissue and are tightly associated with the development,growth,and reproduction of BPH.Our previous research demonstrated that mating behavior promotes the release of YLS from the fat body into the hemolymph in the BPH,thereby triggering an immune response.Additionally,the fitness costs related to life-history traits of BPH(such as survival rate)have a strong dependence on the relative abundance of YLS.However,the possible relationship between reproduction and the immune response in BPH has not been identified.In this study,an omics-based approach was used to analyze the transcriptome of fat body tissues in mated and unmated BPH at 72 h post-eclosion,from which two antimicrobial peptide genes,NlDefensin A(NlDfA)and NlDefensin B(NlDfB),were selected since they were highly expressed in mated BPH.Subsequently,the full-length cDNA sequences of the NlDfA and NlDfB genes were cloned and analyzed.qPCR results showed up-regulation of the NlDfA and NlDfB genes in mated BPH when compared to unmated BPH.Spatial-temporal expression analysis indicated that the NlDfA and NlDfB genes were expressed in all tissues and developmental stages,and they were most highly expressed in the fat body at 24 h post-eclosion.Moreover,the symbionts in BPH were significantly inhibited by the in vitro expression of the NlDfA and NlDfB proteins.Furthermore,RNA interference(RNAi)-mediated suppression of NlDfA and NlDfB dramatically increased the relative abundance of YLS in the fat body,while YLS in the hemolymph decreased significantly.These BPHs also displayed some fitness disadvantages in survival,fecundity,hatchability,and possibly the vertical transmission of YLS from hemolymph to egg.Our results indicated that mating could heighten the immunity of BPH by upregulating the expression of the NlDfA and NlDfB genes,which protect the host from pathogen challenges during reproduction.However,the reduced content of YLS may act as a fitness disadvantage in dictating the life-history traits of BPH.This work has significant theoretical and practical implications for the precise green control technology that involves crucial gene targeting,as well as for the“endosymbionts for pest control”strategy in insects.

Influence of Tomographic Slice Thickness and Field of View Variation on the Reproduction of Thin Bone Structures for Rapid Prototyping Purposes-An in Vitro Study

This study assessed the influence of acquisition parameters of tomographic volumes on the reproduction of thin bone structures for rapid prototyping purposes. Two parameters were investigated: Field of View (FOV) and Slice Thickness (ST). The specimen was comprised of five pairs of 0.6 mm, 1.1 mm, 1.5 mm, 2.0 mm and 2.8 mm thick cortical bone plates. The plates were stuck into utility wax;the first plate of the pair was in vertical position while the second plate was oblique to the first one. Forty-five tomographic images were captured and separated into 3 groups of fifteen images. Each group had a specific FOV: 180 mm;250 mm and 430 mm, respectively. Within each of these three groups, tomographic slice thickness was varied for every five of the fifteen slices. Acquisitions were carried out with STs of 1 mm, 2.5 mm and 5 mm. The Cyclops Medical Station software was used in the voxel-to-voxel analysis of radiologic density, reaching a total of 1350 assessed images. ST and FOV variation influenced the reproduction of thin bone walls, and FOV was shown to be a very important parameter. The larger the acquisition FOV, the more reduction in the number of voxels within the range of reconstruction for cortical bone in all of the bone plates. The visual analysis of the images of very thin bone walls showed that there could be a sharp drop in the radiologic density value in several adjacent voxels, resulting in areas which might not be reproduced in the reconstruction.

Effectiveness of Music-Based Therapeutic Intervention on People with Dementia: A Rapid Review

Background: Dementia is a condition with progressive cognitive dysfunction and manifestation of both behavioral and psychosocial symptoms. Non-pharmacological measures such as music therapy are gaining importance since efficacy and safety of people with dementia have been questionable for pharmacological measures. Patient’s response to music is persistent even in the later stage of dementia. Aim: This rapid review aims to identify, analyze, evaluate, and summarize the best available evidence on the effectiveness of music-based therapeutic interventions among people with dementia. Method: CINAHL Cochrane Library, internet websites of rapid review producers, and reference lists were searched to identify articles for inclusion. Two reviewers independently screened the literature search results. Effectiveness, music-based therapeutic intervention, dementia, Alzheimer’s disease, systematic review and systematic review with meta-analysis terms were used to abstract data from included studies. Main Findings: 11 SRs and SRs with meta-analysis were reviewed which revealed positive effect of music therapy on five major outcomes with 9 studies effect on behavioral outcome, 6 studies with positive effect on psychosocial outcome reducing anxiety, 6 with improved cognition, 1 study revealed with improved quality of life and 1 study revealed effect on physiological outcomes. Conclusion: Music therapy has positive effect on treatment of dementia but further studies with larger sample size and specified to single intervention should be conducted to provide generalisable and precise results on this topic.

Advantages of rapid solidification over casting of Mg-0.4Zn-1Y alloy

The Mg-Y-Zn magnesium alloy system is commonly recognized for its remarkable combination of high strength and ductility,achieved even with minimal amounts of alloying elements.This exceptional performance is attributed to its unique microstructure,which includes Long-Period Stacking Ordered(LPSO)phases or the distinctive microstructure derived from the LPSO phase,referred to as the Mille-Feuille structure(MFS).This study systematically compares the traditional ingot metallurgy method with the rapid solidification technique,coupled with diverse heat treatments and extrusion processes.Microscopic analyses reveal variations in the presence of LPSO phases,Mille-Feuille structure,and grain size,leading to divergent mechanical and corrosion properties.The rapid solidification approach stands out,ensuring superior mechanical properties alongside a reasonable corrosion rate.

Asexual Reproduction of Aurelia coerulea Polyps in situ on Settling Plates in Jiaozhou Bay,China

Jellyfish blooms are increasingly prevalent coastal phenomena,with Aurelia coerulea being a significant contributor.The complex life history of jellyfish,featuring a sessile polyp stage,is a key factor in bloom formation,yet it is challenging to study in the field.This study aimed to describe the asexual reproduction of A.coerulea polyps in Jiaozhou Bay,China,and to assess their ability to form sedentary colonies and their relationship with environmental factors.Using settling plates,we observed polyps in situ and documented three asexual reproduction modes:budding,strobilation,and podocyst formation.Environmental parameters including temperature,salinity,dissolved oxygen(DO),chlorophyll a(Chl a),and the biomass of phytoplankton and zooplankton were monitored.Budding was the predominant reproductive method,featuring stolon budding in autumn and direct budding during the winter and spring seasons.Strobilation took place in the colder months,releasing ephyrae between April and May.Polyp abundance was positively correlated with seawater temperature and negatively correlated with DO concentration.Polyps at 1.0 m depth showed higher survivorship and proliferation over 8 months,whereas those at 2.0 m depth experienced a steady decline and died within 4 months.The study enhances our understanding of the life cycle and asexual reproduction strategies of A.coerulea polyps in the field,with implications for predicting and managing jellyfish blooms.The findings underscore the importance of temperature and DO in polyp survival and suggest that initial polyp population proliferation is crucial for long-term survival.

Evaluation of a Rapid Diagnostic Test, Boson Biotech SARS CoV-2 Ag, for the Detection of SARS-CoV-2 in Gabon

1) Background: Rapid and acurate diagnostic testing for case identification, quarantine, and contact tracing is essential for managing the COVID 19 pandemic. Rapid antigen detection tests are available, however, it is important to evaluate their performances before use. We tested a rapid antigen detection of SARS-CoV-2, based on the immunochromatography (Boson Biotech SARS-CoV-2 Ag Test (Xiamen Boson Biotech Co., Ltd., China)) and the results were compared with the real time reverse transcriptase-Polymerase chain reaction (RT-PCR) (Gold standard) results;2) Methods: From November 2021 to December 2021, samples were collected from symptomatic patients and asymptomatic individuals referred for testing in a hospital during the second pandemic wave in Gabon. All these participants attending “CTA Angondjé”, a field hospital set up as part of the management of COVID-19 in Gabon. Two nasopharyngeal swabs were collected in all the patients, one for Ag test and the other for RT-PCR;3) Results: A total of 300 samples were collected from 189 symptomatic and 111 asymptomatic individuals. The sensitivity and specificity of the antigen test were 82.5% [95%CI 73.8 - 89.3] and 97.9 % [95%CI 92.2 - 98.2] respectively, and the diagnostic accuracy was 84.4% (95% CI: 79.8 - 88.3%). The antigen test was more likely to be positive for samples with RT-PCR Ct values ≤ 32, with a sensitivity of 89.8%;4) Conclusions: The Boson Biotech SARS-CoV-2 Ag Test has good sensitivity and can detect SARS-CoV-2 infection, especially among symptomatic individuals with low viral load. This test could be incorporated into efficient testing algorithms as an alternative to PCR to decrease diagnostic delays and curb viral transmission.

Photo-promoted rapid reconstruction induced alterations in active site of Ag@amorphous NiFe hydroxides for enhanced oxygen evolution reaction

The dynamic surface self-reconstruction behavior in local structure correlates with oxygen evolution reaction(OER)performance,which has become an effective strategy for constructing the catalytic active phase.However,it remains a challenge to understand the mechanisms of reconstruction and to accomplish it fast and deeply.Here,we reported a photo-promoted rapid reconstruction(PRR)process on Ag nanoparticle-loaded amorphous Ni-Fe hydroxide nanosheets on carbon cloth for enhanced OER.The photogenerated holes generated by Ag in conjunction with the anodic potential contributed to a thorough reconstruction of the amorphous substrate.The valence state of unsaturated coordinated Fe atoms,which serve as active sites,is significantly increased,while the corresponding crystalline substrate shows little change.The different structural evolutions of amorphous and crystalline substrates during reconstruction lead to diverse pathways of OER.This PRR utilizing loaded noble metal nanoparticles can accelerate the generation of active species in the substrate and increase the electrical conductivity,which provides a new inspiration to develop efficient catalysts via reconstruction strategies.

Alignment of Track Oscillations during Tropical Cyclone Rapid Intensification

Recent studies on tropical cyclone(TC)intensity change indicate that the development of a vertically aligned TC circulation is a key feature of its rapid intensification(RI),however,understanding how vortex alignment occurs remains a challenging topic in TC intensity change research.Based on the simulation outputs of North Atlantic Hurricane Wilma(2005)and western North Pacific Typhoon Rammasun(2014),vortex track oscillations at different vertical levels and their associated role in vortex alignment are examined to improve our understanding of the vortex alignment during RI of TCs with initial hurricane intensity.It is found that vortex tracks at different vertical levels oscillate consistently in speed and direction during the RI of the two simulated TCs.While the consistent track oscillation reduces the oscillation tilt during RI,the reduction of vortex tilt results mainly from the mean track before RI.It is also found that the vortex tilt is primarily due to the mean vortex track before and after RI.The track oscillations are closely associated with wavenumber-1 vortex Rossby waves that are dominant wavenumber-1 circulations in the TC inner-core region.This study suggests that the dynamics of the wavenumber-1 vortex Rossby waves play an important role in the regulation of the physical processes associated with the track oscillation and vertical alignment of TCs.

Combining first principles and machine learning for rapid assessment response of WO_(3) based gas sensors

The rapid advancement of gas sensitive properties in metal oxides is crucial for detecting hazardous gases in industrial and coal mining environments.However,the conventional experimental trial and error approach poses significant challenges and resource consumption for the high throughput screening of gas sensitive materials.Consequently,this paper introduced a novel screening approach that integrates first principles with machine learning(ML)to rapidly predict the gas sensitivity of materials.Initially,a comprehensive database of multi-physical parameters was established by modeling various adsorption sites on the surface of WO3,which serves as a representative material.Since density functional theory(DFT)is one of the first principles,DFT calculations were conducted to derive essential multi-physical parameters,including bandgap,density of states(DOS),Fermi level,adsorption energy,and structural modifications resulting from adsorption.The collected data was subsequently utilized to develop a cor-relation model linking the multi-physical parameters to gas sensitive performance using intelligent algo-rithms.The model’s performance was assessed through receiver operating characteristic(ROC)curves,confusion matrices,and other evaluation metrics,ultimately achieving a prediction accuracy of 90%for identifying key features influencing gas adsorption performance.This proposed strategy for predicting the gas sensitive characteristics of materials holds significant potential for application in identifying addi-tional gas sensitive properties across various materials.

Tissue distribution of cadmium and its effect on reproduction in Spodoptera exigua

Vegetable fields are often contaminated by heavy metals,and Spodoptera exigua is a major vegetable pest which is stressed by heavy metals mainly by feeding.In this study,cadmium accumulation in the tissues of S.exigua exposed to cadmium and its effects on the growth and development of the parents and the offspring were investigated.Under the stress of different concentrations of cadmium(0.2,3.2,and 51.2 mg kg^(-1)),the cadmium content in each tissue of S.exigua increased in a dose-dependent manner.At the larval stage,the highest cadmium accumulation was found in midgut in all three cadmium treatments,but at the adult stage,the highest cadmium content was found in fat body.In addition,the cadmium content in ovaries was much higher than in testes.When F1S.exigua was stressed by cadmium and the F_(2)generation was not fed a cadmium-containing diet,the larval survival,pupation rate,emergence rate and fecundity of the F_(2)generation were significantly reduced in the 51.2 mg kg^(-1)treatment compared to the corresponding F1generation.Even in the F_(2)generation of the 3.2 mg kg^(-1)treatment,the fecundity was significantly lower than in the parental generation.The fecundity of the only-female stressed treatment was significantly lower than that of the only-male stressed treatment at the 3.2 and 51.2 mg kg^(-1)cadmium exposure levels.When only mothers were stressed at the larval stage,the fecundity of the F_(2)generation was significantly lower than that of the F1generation in the 51.2 mg kg^(-1)treatment,and it was also significantly lower than in the 3.2 and 0.2 mg kg^(-1)treatments.The results of our study can provide useful information for forecasting the population increase trends under different heavy metal stress conditions and for the reliable environmental risk assessment of heavy metal pollution.

Old Pinus massoniana forests benefit more from recent rapid warming in humid subtropical areas of central-southern China

Trees progress through various growth stages,each marked by specific responses and adaptation strate-gies to environmental conditions.Despite the importance of age-related growth responses on overall forest health and management policies,limited knowledge exists regarding age-related effects on dendroclimatic relationships in key subtropical tree species.In this study,we employed a den-drochronological method to examine the impact of rapid warming on growth dynamics and climatic sensitivity of young(40–60 years)and old(100–180 years)Pinus mas-soniana forests across six sites in central-southern China.The normalized log basal area increment of trees in both age groups increased significantly following rapid warming in 1984.Trees in young forests further showed a distinct growth decline during a prolonged severe drought(2004–2013),whereas those in old forests maintained growth increases.Tree growth was more strongly influenced by temperature than by moisture,particularly in old forests.Spring tem-peratures strongly and positively impacted the growth of old trees but had a weaker effect on young ones.Old forests had a significantly lower resistance to extreme drought but faster recovery compared to young forests.The“divergence problem”was more pronounced in younger forests due to their heightened sensitivity to warming-induced drought and heat stress.With ongoing warming,young forests also may initially experience a growth decline due to their heightened sensitivity to winter drought.Our findings underscore the importance of considering age-dependent changes in forest/tree growth response to warming in subtropical forest man-agement,particularly in the context of achieving“Carbon Peak&Carbon Neutrality”goals in China.

Rapid and real-time analysis of multi-component dissolved gas in seawater by Raman spectroscopy combined with continuous gas-liquid separator

Rapid and sensitive detection of dissolved gases in seawater is quite essential for the investigation of the global carbon cycle.Large quantities of in situ optical detection techniques showed restricted measurement efficiency,owing to the single gas sensor without the identification ability of multiple gases.In this work,a novel gas-liquid Raman detection method of monitoring the multi-component dissolved gases was proposed based on a continuous gas-liquid separator under a large difference of partial pressure.The limit of detection(LOD)of the gas Raman spectrometer could arrive at about 14 μl·L^(-1)for N_(2)gas.Moreover,based on the continuous gas-liquid separation process,the detection time of the dissolved gases could be largely decreased to about 200 s compared with that of the traditional detection method(30 min).Effect of equilibrium time on gas-liquid separation process indicated that the extracted efficiency and decay time of these dissolved gases was CO_(2)>O_(2)>N_(2).In addition,the analysis of the relationship between equilibrium time and flow speed indicated that the decay time decreased with the increase of the flow speed.The validation and application of the developed system presented its great potential for studying the components and spatiotemporal distribution of dissolved gases in seawater.

Method for rapid warning and activity concentration estimates in online waterγ-spectrometry systems

Onlineγ-spectrometry systems for inland waters,most of which extract samples in situ and in real time,are able to produce reliable activity concentration measurements for waterborne radionuclides only when they are distributed relatively uniformly and enter into a steady-state diffusion regime in the measurement chamber.To protect residents’health and ensure the safety of the living environment,better timeliness is required for this measurement method.To address this issue,this study established a mathematical model of the online waterγ-spectrometry system so that rapid warning and activity estimates can be obtained for water under non-steady-state(NSS)conditions.In addition,the detection efficiency of the detector for radionuclides during the NSS diffusion process was determined by applying the computational fluid dynamics technique in conjunction with Monte Carlo simulations.On this basis,a method was developed that allowed the online waterγ-spectrometry system to provide rapid warning and activity concentration estimates for radionuclides in water.Subsequent analysis of the NSS-mode measurements of^(40)K radioactive solutions with different activity concentrations determined the optimum warning threshold and measurement time for producing accurate activity concentration estimates for radionuclides.The experimental results show that the proposed NSS measurement method is able to give warning and yield accurate activity concentration estimates for radionuclides 55.42 and 69.42 min after the entry of a 10 Bq/L^(40)K radioactive solution into the measurement chamber,respectively.These times are much shorter than the 90 min required by the conventional measurement method.Furthermore,the NSS measurement method allows the measurement system to give rapid(within approximately 15 min)warning when the activity concentrations of some radionuclides reach their respective limits stipulated in the Guidelines for Drinking-water Quality of the WHO,suggesting that this method considerably enhances the warning capacity of in situ online waterγ-spectrometry systems.

Rapid prediction of flow and concentration fields in solid-liquid suspensions of slurry electrolysis tanks

Slurry electrolysis(SE),as a hydrometallurgical process,has the characteristic of a multitank series connection,which leads to various stirring conditions and a complex solid suspension state.The computational fluid dynamics(CFD),which requires high computing resources,and a combination with machine learning was proposed to construct a rapid prediction model for the liquid flow and solid concentration fields in a SE tank.Through scientific selection of calculation samples via orthogonal experiments,a comprehensive dataset covering a wide range of conditions was established while effectively reducing the number of simulations and providing reasonable weights for each factor.Then,a prediction model of the SE tank was constructed using the K-nearest neighbor algorithm.The results show that with the increase in levels of orthogonal experiments,the prediction accuracy of the model improved remarkably.The model established with four factors and nine levels can accurately predict the flow and concentration fields,and the regression coefficients of average velocity and solid concentration were 0.926 and 0.937,respectively.Compared with traditional CFD,the response time of field information prediction in this model was reduced from 75 h to 20 s,which solves the problem of serious lag in CFD applied alone to actual production and meets real-time production control requirements.

Observation of the Effectiveness of Rapid Recovery Nursing on Lung Cancer Surgery Patients and Its Impact on Sleep Quality

Objective: To investigate the nursing effects of rapid recovery care measures on lung cancer surgery patients. Methods: 42 cases of lung cancer surgery patients were divided into control group and study group, with 21 cases in each group. The sleep quality and postoperative recovery indicators were compared between the two groups. Results: The study group showed better results than the control group in terms of PSQI scores, venting time, extubation time, time to getting out of bed, and duration of antibiotic use, with P Conclusion: Rapid recovery nursing has a positive impact on improving sleep quality and promoting postoperative recovery in lung cancer surgery patients.