A hydrotalcite(layered double hydroxide, LDH) inhibitor which is suitable for the whole process of coal spontaneous combustion and a LDH inhibitor containing rare earth lanthanum elements were prepared. The inhibition...A hydrotalcite(layered double hydroxide, LDH) inhibitor which is suitable for the whole process of coal spontaneous combustion and a LDH inhibitor containing rare earth lanthanum elements were prepared. The inhibition effect and mechanism were analyzed by scanning electron microscopy(SEM),X-ray diffraction(XRD), thermal performance analysis, in-situ diffuse reflectance infrared spectroscopy and temperature-programmed experiment. The results have shown that the inhibitor containing lanthanum can play a good inhibitory role in every stage of coal oxidation. During the slow oxidation of coal samples, the inhibitor containing lanthanum ions can slow down the oxidation process of coal and increase the initial temperature of coal spontaneous combustion. At the same time, because the hydroxyl groups in LDHs are connected with-COO-groups on the coal surface through hydrogen bonds, the stability of coal is improved. With the increase of temperature, LDHs can remove interlayer water molecules and reduce the surface temperature of coal. CO release rate of coal samples decreases significantly after adding inhibitor containing lanthanum element, and the maximum inhibition rate of the inhibitor is 58.1%.展开更多
Biomedical magnesium(Mg)alloys have garnered significant attention because of their unique biodegradability,favorable biocompatibility,and suitable mechanical properties.The incorporation of rare earth(RE)elements,wit...Biomedical magnesium(Mg)alloys have garnered significant attention because of their unique biodegradability,favorable biocompatibility,and suitable mechanical properties.The incorporation of rare earth(RE)elements,with their distinct physical and chemical properties,has greatly contributed to enhancing the mechanical performance,degradation behavior,and biological performance of biomedical Mg alloys.Currently,a series of RE-Mg alloys are being designed and investigated for orthopedic implants and cardiovascular stents,achieving substantial and encouraging research progress.In this work,a comprehensive summary of the state-of-the-art in biomedical RE-Mg alloys is provided.The physiological effects and design standards of RE elements in biomedical Mg alloys are discussed.Particularly,the degradation behavior and mechanical properties,including their underlying action are studied in-depth.Furthermore,the preparation techniques and current application status of RE-Mg alloys are reviewed.Finally,we address the ongoing challenges and propose future prospects to guide the development of high-performance biomedical Mg-RE alloys.展开更多
The A_(2)B_(2)O_(7)-type rare earth zirconate compounds have been considered as promising candidates for thermal barrier coating(TBC) materials because of their low sintering rate,improved phase stability,and reduced ...The A_(2)B_(2)O_(7)-type rare earth zirconate compounds have been considered as promising candidates for thermal barrier coating(TBC) materials because of their low sintering rate,improved phase stability,and reduced thermal conductivity in contrast with the currently used yttria-partially stabilized zirconia (YSZ) in high operating temperature environments.This review summarizes the recent progress on rare earth zirconates for TBCs that insulate high-temperature gas from hot-section components in gas turbines.Based on the first principles,molecular dynamics,and new data-driven calculation approaches,doping and high-entropy strategies have now been adopted in advanced TBC materials design.In this paper,the solid-state heat transfer mechanism of TBCs is explained from two aspects,including heat conduction over the full operating temperature range and thermal radiation at medium and high temperature.This paper also provides new insights into design considerations of adaptive TBC materials,and the challenges and potential breakthroughs are further highlighted for extreme environmental applications.Strategies for improving thermophysical performance are proposed in two approaches:defect engineering and material compositing.展开更多
In the process of ion-adsorption rare earth ore leaching,the migration characteristics of the wetting front in multi-hole injection holes and the influence of wetting front intersection effect on the migration distanc...In the process of ion-adsorption rare earth ore leaching,the migration characteristics of the wetting front in multi-hole injection holes and the influence of wetting front intersection effect on the migration distance of wetting fronts are still unclear.Besides,wetting front migration distance and leaching time are usually required to optimize the leaching process.In this study,wetting front migration tests of ionadsorption rare earth ores during the multi-hole fluid injection(the spacing between injection holes was 10 cm,12 cm and 14 cm)and single-hole fluid injection were completed under the constant water head height.At the pre-intersection stage,the wetting front migration laws of ion-adsorption rare earth ores during the multi-hole fluid injection and single-hole fluid injection were identical.At the postintersection stage,the intersection accelerated the wetting front migration.By using the Darcy’s law,the intersection effect of wetting fronts during the multi-hole liquid injection was transformed into the water head height directly above the intersection.Finally,based on the Green-Ampt model,a wetting front migration model of ion-adsorption rare earth ores during the multi-hole unsaturated liquid injection was established.Error analysis results showed that the proposed model can accurately simulate the infiltration process under experimental conditions.The research results enrich the infiltration law and theory of ion-adsorption rare earth ores during the multi-hole liquid injection,and this study provides a scientific basis for optimizing the liquid injection well pattern parameters of ion-adsorption rare earth in situ leaching in the future.展开更多
This study was to explore the functional mechanism of rare earth regulating soybean leaves and the characteristics and functions of differentially expressed proteins under the regulation of rare earth. In this study, ...This study was to explore the functional mechanism of rare earth regulating soybean leaves and the characteristics and functions of differentially expressed proteins under the regulation of rare earth. In this study, Dongnong 42 was used as material, and 30 mg·L^(-1) CeCl_(3) solution was sprayed on soybean leaves at the seedling stage. Tandem mass tag(TMT) quantitative proteomics technique and bioinformatics analysis were used to identify soybean leaf proteins. A total of 8 510 proteins were identified, and 127 differentially expressed proteins(DEPs) in response to rare earth cerium regulation were identified, among which 64 were upregulated and 63 were down-regulated. The gene ontology(GO) annotation indicated that DEPs were mainly involved in metabolic process, cellular process, response to stimulus, biological regulation, and response to a stimulus;DEPs in cell module categories were mainly involved in cells, cell part, organelle, membrane, membrane part, organelle par, and protein-containing complex;DEPs in molecular functional categories were mainly involved in catalytic activity, binding and antioxidant activity. Kyoto encyclopedia of genes and genomes(KEGG) pathway significantly enriched starch and sucrose metabolism, glycolysis/gluconeogenesis, galactose metabolism, pentose phosphate pathway, and MAPK signaling pathway-plant. These DEPs were mainly involved in photosynthesis, glucose metabolism and stress response. Forty-six differential protein interaction networks were identified by protein interaction network analysis. This experiment provided a reference for studies of the mechanism of rare earth cerium regulating soybean leaf function from the proteomic perspective.展开更多
A new paper in Nature Physics shows that by cramming lots of rare earth ions into a crystal,some will form pairs that act as highly coherent qubits,thus debunking the idea that solid-state qubits need to be super dilu...A new paper in Nature Physics shows that by cramming lots of rare earth ions into a crystal,some will form pairs that act as highly coherent qubits,thus debunking the idea that solid-state qubits need to be super dilute in an ultra-clean material to achieve long lifetimes.According to the study's authors,one of the major barriers to practical quantum computing has been how to make qubits that retain their quantum information long enough to be useful.展开更多
The successful production of the first batch of medium and heavy rare earth metal products of Ruixin Company,a subsidiary of CNREG,marks that CNREG has realized large-scale production of medium and heavy rare earth me...The successful production of the first batch of medium and heavy rare earth metal products of Ruixin Company,a subsidiary of CNREG,marks that CNREG has realized large-scale production of medium and heavy rare earth metal products for the first time.The new products not only expand CNREG’s categories of metal and alloy products,but also replenish the shortcomings of CNREG in the industrial chain at the production of rare earth metals,complete the product structure,broaden the value boundary of resources and open up new economic growth point for CNREG.展开更多
The hot deformation behavior of Mn18Cr18N and Mn18Cr18N+Ce high nitrogen austenitic stainless steels at 1173-1473 K and 0.01-1 s^(-1) were investigated by thermal compression tests.The influence mechanism of Ce on the...The hot deformation behavior of Mn18Cr18N and Mn18Cr18N+Ce high nitrogen austenitic stainless steels at 1173-1473 K and 0.01-1 s^(-1) were investigated by thermal compression tests.The influence mechanism of Ce on the hot deformation behavior was analyzed by Ce-containing inclusions and segregation of Ce.The results show that after the addition of Ce,large,angular,hard,and brittle inclusions(TiN-Al_(2)O_(3),TiN,and Al_(2)O_(3)) can be modified to fine and dispersed Ce-containing inclusions(Ce-Al-O-S and TiN-Ce-Al-O-S).During the solidification,Ce-containing inclusions can be used as heterogeneous nucleation particles to refine as-cast grains.During the hot deformation,Ce-containing inclusions can pin dislocation movement and grain boundary migration,induce dynamic recrystallization(DRX)nucleation,and avoid the formation and propagation of micro cracks and gaps.In addition,during the solidification,Ce atoms enrich at the front of solid-li-quid interface,resulting in composition supercooling and refining the secondary dendrites.Similarly,during the hot deformation,Ce atoms tend to segregate at the boundaries of DRX grains,inhibiting the growth of grains.Under the synergistic effect of Ce-containing inclusions and Ce segregation,although the hot deformation resistance and hot deformation activation energy are improved,DRX is more likely to occur and the size of DRX grains is significantly refined,and the problem of hot deformation cracking can be alleviated.Finally,the microhardness of the samples was measured.The results show that compared with as-cast samples,the microhardness of hot-deformed samples increases signific-antly,and with the increase of DRX degree,the microhardness decreases continuously.In addition,Ce can affect the microhardness of Mn18Cr18N steel by affecting as-cast and hot deformation microstructures.展开更多
In this study,we successfully developed a low RE containing Mg-3Y-2Gd-1Nd-0.5Zr(wt%)alloy with high strength-ductility synergy by combined processes of hot extrusion,hot rolling and ageing.This alloy exhibits an excel...In this study,we successfully developed a low RE containing Mg-3Y-2Gd-1Nd-0.5Zr(wt%)alloy with high strength-ductility synergy by combined processes of hot extrusion,hot rolling and ageing.This alloy exhibits an excellent strength-ductility balance(UTS of 345±2.0 MPa,TYS of 301±5.0 MPa and EL of 9.2±1.9%),which is better than that of many Mg-RE wrought alloys with higher RE concentration and even comparable to that of 6061 Al wrought alloy.A long-range chain-like structure consisting ofβphase,βH phase,βM phase and zig-zag atomic columns is observed for the first time in the studied alloy.The combined process of hot extrusion and hot rolling boosts the formation of deformed grains and low angle grain boundaries,and makes the deformed grains dominate in the alloy strengthening.Under this circumstance,the following ageing generates a novel heterogeneous structure comprising the long-range chain-like structure with broad interparticle spacing and the spacious precipitate-free zones in the deformed grains,which plays a key role in the concurrent strengthening and toughening of the alloy.The present study demonstrates that the deformed grains with long-range chain-like structures and precipitate-free zones is desirable microstructure for the low RE containing Mg alloys to achieve high strength-ductility synergy.展开更多
To investigate the effect of rare earth on size and distribution of TiB2 phase in aluminum alloy refiner,Al-5Ti-1B-RE master alloy was fabricated,and its microstructure and phase constitutions were investigated by the...To investigate the effect of rare earth on size and distribution of TiB2 phase in aluminum alloy refiner,Al-5Ti-1B-RE master alloy was fabricated,and its microstructure and phase constitutions were investigated by the combination of first principles calculations and experimental investigation.The calculated results reveal that Ce has the most effective modification ability due to the most positive adsorption energy and the largest charge transfer value compared with other rare earth elements.Results of experimental investigation indicate that the addition of rare earth in the Al-5Ti-1B alloys can greatly refine the particle size of TiB2,improve the distribution of particles and lead to better refinement effect than that of the Al-5Ti-1B alloys without rare earth.Moreover,Ce has the best optimization effect,which agrees well with the calculated results.展开更多
With the rapid development of society and economy, the excessive consumption of fossil energy has led to the global energy and environment crisis. In order to explore the sustainable development of new energy, researc...With the rapid development of society and economy, the excessive consumption of fossil energy has led to the global energy and environment crisis. In order to explore the sustainable development of new energy, research based on electrocatalysis has attracted extensive attention in the academic circle. The main challenge in this field is to develop nano-catalysts with excellent electrocatalytic activity and selectivity for target products. The state of the active site in catalyst plays a decisive role in the activity and selectivity of the reaction. In order to design efficient and excellent catalysts, it is an effective means to adjust the electronic structure of catalysts. Electronic effects are also called ligand effects. By alloying with rare earth(RE) elements, electrons can be redistributed between RE elements and transition metal elements, achieving accurate design of the electronic structure of the active site in the alloy. Because of the unique electronic structure of RE, it has been paid attention in the field of catalysis. The outermost shell structure of RE elements is basically the same as that of the lower shell, except that the number of electrons in the 4f orbital is different, but the energy level is similar, so their properties are very similar. When RE elements form compounds, both the f electrons in the outermost shell and the d electrons in the lower outer shell can participate in bonding. In addition, part of the 4f electrons in the third outer shell can also participate in bonding.In order to improve the performance of metal catalysts, alloying provides an effective method to design advanced functional materials. RE alloys can integrate the unique electronic structure and catalytic behavior of RE elements into metal materials, which not only provides an opportunity to adjust the electronic structure and catalytic activity of the active component, but also enhances the structural stability of the alloy and is expected to significantly improve the catalytic performance of the catalyst. From the perspective of electronic and catalytic activity, RE elements have unique electronic configuration and lanthanide shrinkage effect. Alloying with RE elements will make the alloy have more abundant electronic structure, activity, and spatial arrangement, effectively adjusting the reaction kinetics of the electrochemical process of the catalyst. In this paper, the composition,structure, synthesis of RE alloys and their applications in the field of electrocatalysis are summarized, including the hydrogen evolution reaction, the oxygen evolution reaction, the oxygen reduction reaction, the methanol oxidation reaction, the ethanol oxidation reaction, and other catalytic reactions. At the same time, the present challenges of RE alloy electrocatalytic materials are summarized and their future development direction is pointed out. In the field of electrocatalysis, the cost of catalyst is too high and the stability is not strong. Therefore, the testing process should be related to the actual application, and the test method should be standardized, so as to carry forward the field of electrocatalysis.展开更多
Total of 23 bench samples were taken from the No. 7 Coal of Iqe Coalfield, Qinghai Province, China, following Chinese Standard Method GB/T 482-2008 (2008). These samples were analyzed by powder X-ray diffraction (...Total of 23 bench samples were taken from the No. 7 Coal of Iqe Coalfield, Qinghai Province, China, following Chinese Standard Method GB/T 482-2008 (2008). These samples were analyzed by powder X-ray diffraction (XRD), inductively coupled plasma mass spectrometry (ICP- MS) and X-ray fluorescence (XRF). The results indicate that the No. 7 Coal belongs to a low rank (Ro.ran =0.659%) and high-ash coal (40.54%). Compared to common Chinese and world low-rank coals, the lqe coal contains anomalous concentrations of rare metal elements, rare-scattered (dispersed) elements and rare earth elements. The highest contents of Rb, Cs, Ga and REY reach to 180, 26, 37, and 397 ppm, respectively. Their average contents of these elements are 10.9, 15, 4.8 and 3.5 times higher than those of world coals, respectively. Minerals in the coal include kaolinite, quartz, muscovite, siderite, and traces of rutile, and brookite. Kaolinite could be main host minerals of Rb, Cs, Ga and REY. The anomalous rare element Rb and Cs accumulation in the Iqe coal is related to both organic and inorganic matter. The REY concentrations may be related to circulation of thermal solutions, contained or sorbed by clayey particles, and organic matter as well.展开更多
The modifying effect of rare earth (RE) oxide on inclusions in hardfacing metals of medium-high carbon steel was investigated by means of thermodynamics. The thermodynamic analysis for inclusion formation shows that ...The modifying effect of rare earth (RE) oxide on inclusions in hardfacing metals of medium-high carbon steel was investigated by means of thermodynamics. The thermodynamic analysis for inclusion formation shows that RE oxide can be reduced to RE element by carbon, then the RE element can react with oxygen and sulfur to form the RE oxide, RE sulfide and RE oxide-sulfide in hardfacing molten pool. The deoxidization and the desulphurization can be carried out and the liquid metal can be purified. In addition, RE oxide can also react with sulfur to form RE oxide-sulfide directly. Therefore, the harmful effect of sulfur can be decreased.展开更多
1 Introduction Massive tungsten-tin,rare and rare earth metals ore deposits were formed with the widespread granite magmatic activity in early Yanshanian period in the eastern Nanling region.Recent studies indicate th...1 Introduction Massive tungsten-tin,rare and rare earth metals ore deposits were formed with the widespread granite magmatic activity in early Yanshanian period in the eastern Nanling region.Recent studies indicate that the Yanshanian highly differentiated-granite formation is closely related to the deposits of tungsten and tin,rare and rare earth metals mineralization in the region(Xiao展开更多
The performance of LiNi/γ-Al2O3 catalysts modified by rare earth metal oxide (La2O3 or CeO2) packed on BCFNO membrane reactor was discussed for the partial oxidation of methane (POM) in coke oven gas (COG) at 8...The performance of LiNi/γ-Al2O3 catalysts modified by rare earth metal oxide (La2O3 or CeO2) packed on BCFNO membrane reactor was discussed for the partial oxidation of methane (POM) in coke oven gas (COG) at 875 ℃. The NiO/γ-Al2O3 catalysts with different amounts of La2O3 and CeO2 were prepared with the same preparation method and under the same condition in order to compare the reaction performance (oxygen permeation, CH4 conversion, H2 and CO selectivity) on the membrane reactor. The results show that the oxygen permeation flux increased significantly with LiNiREOx/γ-Al2O3 (RE = La or Ce) catalysts by adding the element of rare earth especially the Ce during the POM in COG. Such as, the Li15wt%CeO29wt%NiO/γ-Al2O3 catalyst with an oxygen permeation flux of 24.71 ml·cm^-2·min^-1 and a high CH4 conversion was obtained in 875 ℃. The resulted high oxygen permeation flux may be due to the added Ce that inhibited the strong interaction between Ni and Al2O3 to form the NiAl2O4 phase. In addition, the introduction of Ce leads up to an important property of storing and releasing oxygen.展开更多
In this paper, the recent advance of processes for treating Baotou mixed-type rare earths concentrate, bastnasite, and ionic adsorption deposit in China was reviewed. The R & D circumstance and new progresses in s...In this paper, the recent advance of processes for treating Baotou mixed-type rare earths concentrate, bastnasite, and ionic adsorption deposit in China was reviewed. The R & D circumstance and new progresses in separation and purification of individual and high purity RE compounds in China were introduced. Moreover, the development of RE hydrometallurgy was also predicted. So we suggest to enhance the research and development of products applying RE, especially Ce, Y, Gd, Sm etc., for keeping RE consumption equilibrium and extending applications, to increase enterprise's automatic control level for improving the stability and the consistency of the products, and to pay more attention to protection of environment.展开更多
Introduction It is well known that organometallic hydrides of rare earth metals are the catalysts and reducing reagents for the catalysis polymerization of alkenes and the catalysis hydrogenation of alkenoalkynes. The...Introduction It is well known that organometallic hydrides of rare earth metals are the catalysts and reducing reagents for the catalysis polymerization of alkenes and the catalysis hydrogenation of alkenoalkynes. There are four methods for the syntheses of organometallic hydrides of rare earth metals:(1) the thermal atomization of metals, i.e., the interaction of a rare earth metal with alkenes with a terminal alkyne;(2) the Ln—Cσ bond is broken with H;;(3) metal-展开更多
The friction and wear properties of metal-plastic multilayer composites filled with glass fiber, which is treated with rare earth element surface modifier, under impact load and dry friction conditions were investigat...The friction and wear properties of metal-plastic multilayer composites filled with glass fiber, which is treated with rare earth element surface modifier, under impact load and dry friction conditions were investigated. Experimental results show that the metal-plastic multilayer composite filled with glass fiber exhibits excellent friction and impact wear properties when using rare earth elements as surface modifier for the surface treatment of glass fiber.展开更多
Al-Si metal matrix composites (MMCs) reinforced with 20 vol.% alumina-silicate shot fibers (Al2O3-SiO2(sf)) were fabricated by an infiltration squeeze method. Pure Pr metal was added into these composites. The effect ...Al-Si metal matrix composites (MMCs) reinforced with 20 vol.% alumina-silicate shot fibers (Al2O3-SiO2(sf)) were fabricated by an infiltration squeeze method. Pure Pr metal was added into these composites. The effect of Pr addition on the microstructure evolution of Al-Si MMCs was investigated by SEM,TEM,and EDS. Pr addition is favorable to make uniform microstructures with the modified eutectic Si crystal. PrAlSi phase with high contents of Pr and Si is observed on the interface between the fiber and the matrix. The addition of Pr promotes interface SiO2 reduction,and SiO2 comes from the crystallization of Al2O3-SiO2 short fibers.展开更多
The rare earth (RE) elements (Ce, La) were added to binary Ti 47% Al alloys (atomic fraction) by Induction Skull Melting. The element Ce of 1.0 atomic percent was added individually, and La of 0.2 atomic percent was ...The rare earth (RE) elements (Ce, La) were added to binary Ti 47% Al alloys (atomic fraction) by Induction Skull Melting. The element Ce of 1.0 atomic percent was added individually, and La of 0.2 atomic percent was added individually. This article studied the influences of rare earth metal (Ce, La) on microstructure of as cast TiAl based alloy by XRD, SEM, EMPA and TEM measurement methodology. The results show that most of rare earth rich phases (AlCe, AlLa) are uniformly distributed in grain boundary in the shape of discontinuous network, and some particles of rare earth rich phases within the grains are mainly ellipsoids. In addition, rare earth element can obviously refine the grain size and the lamellar thickness of as cast TiAl based alloy samples. The grain size of Ti 47Al 1.0Ce 0.2La alloy reaches about 30~80 μm, and the lamellar thickness of its γ phase and α 2 phase are less than 200 and 20 nm, respectively.展开更多
基金Funded by National Natural Science Foundation of China (No.52074218)。
文摘A hydrotalcite(layered double hydroxide, LDH) inhibitor which is suitable for the whole process of coal spontaneous combustion and a LDH inhibitor containing rare earth lanthanum elements were prepared. The inhibition effect and mechanism were analyzed by scanning electron microscopy(SEM),X-ray diffraction(XRD), thermal performance analysis, in-situ diffuse reflectance infrared spectroscopy and temperature-programmed experiment. The results have shown that the inhibitor containing lanthanum can play a good inhibitory role in every stage of coal oxidation. During the slow oxidation of coal samples, the inhibitor containing lanthanum ions can slow down the oxidation process of coal and increase the initial temperature of coal spontaneous combustion. At the same time, because the hydroxyl groups in LDHs are connected with-COO-groups on the coal surface through hydrogen bonds, the stability of coal is improved. With the increase of temperature, LDHs can remove interlayer water molecules and reduce the surface temperature of coal. CO release rate of coal samples decreases significantly after adding inhibitor containing lanthanum element, and the maximum inhibition rate of the inhibitor is 58.1%.
基金supported by National Key Research and Development Program of China[2023YFB4605800]National Natural Science Foundation of China[51935014,52165043]+3 种基金JiangXi Provincial Natural Science Foundation of China[20224ACB204013,20224ACB214008]Jiangxi Provincial Cultivation Program for Academic and Technical Leaders of Major Subjects[20225BCJ23008]Anhui Provincial Natural Science Foundation[2308085ME171]The University Synergy Innovation Program of Anhui Province[GXXT-2023-025,GXXT-2023-026].
文摘Biomedical magnesium(Mg)alloys have garnered significant attention because of their unique biodegradability,favorable biocompatibility,and suitable mechanical properties.The incorporation of rare earth(RE)elements,with their distinct physical and chemical properties,has greatly contributed to enhancing the mechanical performance,degradation behavior,and biological performance of biomedical Mg alloys.Currently,a series of RE-Mg alloys are being designed and investigated for orthopedic implants and cardiovascular stents,achieving substantial and encouraging research progress.In this work,a comprehensive summary of the state-of-the-art in biomedical RE-Mg alloys is provided.The physiological effects and design standards of RE elements in biomedical Mg alloys are discussed.Particularly,the degradation behavior and mechanical properties,including their underlying action are studied in-depth.Furthermore,the preparation techniques and current application status of RE-Mg alloys are reviewed.Finally,we address the ongoing challenges and propose future prospects to guide the development of high-performance biomedical Mg-RE alloys.
基金the financial support from the National Natural Science Foundation of China(Nos.51572061,51621091,and 51321061)the Heilongjiang Touyan Team Program。
文摘The A_(2)B_(2)O_(7)-type rare earth zirconate compounds have been considered as promising candidates for thermal barrier coating(TBC) materials because of their low sintering rate,improved phase stability,and reduced thermal conductivity in contrast with the currently used yttria-partially stabilized zirconia (YSZ) in high operating temperature environments.This review summarizes the recent progress on rare earth zirconates for TBCs that insulate high-temperature gas from hot-section components in gas turbines.Based on the first principles,molecular dynamics,and new data-driven calculation approaches,doping and high-entropy strategies have now been adopted in advanced TBC materials design.In this paper,the solid-state heat transfer mechanism of TBCs is explained from two aspects,including heat conduction over the full operating temperature range and thermal radiation at medium and high temperature.This paper also provides new insights into design considerations of adaptive TBC materials,and the challenges and potential breakthroughs are further highlighted for extreme environmental applications.Strategies for improving thermophysical performance are proposed in two approaches:defect engineering and material compositing.
基金This research was funded by the National Natural Science Foundation of China(Grant No.52174113)the Young Jinggang Scholars Award Program in Jiangxi Province,China(Grant No.QNJG2018051)the“Thousand Talents”of Jiangxi Province,China(Grant No.jxsq2019201043).
文摘In the process of ion-adsorption rare earth ore leaching,the migration characteristics of the wetting front in multi-hole injection holes and the influence of wetting front intersection effect on the migration distance of wetting fronts are still unclear.Besides,wetting front migration distance and leaching time are usually required to optimize the leaching process.In this study,wetting front migration tests of ionadsorption rare earth ores during the multi-hole fluid injection(the spacing between injection holes was 10 cm,12 cm and 14 cm)and single-hole fluid injection were completed under the constant water head height.At the pre-intersection stage,the wetting front migration laws of ion-adsorption rare earth ores during the multi-hole fluid injection and single-hole fluid injection were identical.At the postintersection stage,the intersection accelerated the wetting front migration.By using the Darcy’s law,the intersection effect of wetting fronts during the multi-hole liquid injection was transformed into the water head height directly above the intersection.Finally,based on the Green-Ampt model,a wetting front migration model of ion-adsorption rare earth ores during the multi-hole unsaturated liquid injection was established.Error analysis results showed that the proposed model can accurately simulate the infiltration process under experimental conditions.The research results enrich the infiltration law and theory of ion-adsorption rare earth ores during the multi-hole liquid injection,and this study provides a scientific basis for optimizing the liquid injection well pattern parameters of ion-adsorption rare earth in situ leaching in the future.
基金Supported by the National Natural Science Foundation of China(31471440)。
文摘This study was to explore the functional mechanism of rare earth regulating soybean leaves and the characteristics and functions of differentially expressed proteins under the regulation of rare earth. In this study, Dongnong 42 was used as material, and 30 mg·L^(-1) CeCl_(3) solution was sprayed on soybean leaves at the seedling stage. Tandem mass tag(TMT) quantitative proteomics technique and bioinformatics analysis were used to identify soybean leaf proteins. A total of 8 510 proteins were identified, and 127 differentially expressed proteins(DEPs) in response to rare earth cerium regulation were identified, among which 64 were upregulated and 63 were down-regulated. The gene ontology(GO) annotation indicated that DEPs were mainly involved in metabolic process, cellular process, response to stimulus, biological regulation, and response to a stimulus;DEPs in cell module categories were mainly involved in cells, cell part, organelle, membrane, membrane part, organelle par, and protein-containing complex;DEPs in molecular functional categories were mainly involved in catalytic activity, binding and antioxidant activity. Kyoto encyclopedia of genes and genomes(KEGG) pathway significantly enriched starch and sucrose metabolism, glycolysis/gluconeogenesis, galactose metabolism, pentose phosphate pathway, and MAPK signaling pathway-plant. These DEPs were mainly involved in photosynthesis, glucose metabolism and stress response. Forty-six differential protein interaction networks were identified by protein interaction network analysis. This experiment provided a reference for studies of the mechanism of rare earth cerium regulating soybean leaf function from the proteomic perspective.
文摘A new paper in Nature Physics shows that by cramming lots of rare earth ions into a crystal,some will form pairs that act as highly coherent qubits,thus debunking the idea that solid-state qubits need to be super dilute in an ultra-clean material to achieve long lifetimes.According to the study's authors,one of the major barriers to practical quantum computing has been how to make qubits that retain their quantum information long enough to be useful.
文摘The successful production of the first batch of medium and heavy rare earth metal products of Ruixin Company,a subsidiary of CNREG,marks that CNREG has realized large-scale production of medium and heavy rare earth metal products for the first time.The new products not only expand CNREG’s categories of metal and alloy products,but also replenish the shortcomings of CNREG in the industrial chain at the production of rare earth metals,complete the product structure,broaden the value boundary of resources and open up new economic growth point for CNREG.
基金supported by the National Natural Science Foundation of China(No.51874084)the Fundamental Research Funds for the Central Universities(No.2125026)。
文摘The hot deformation behavior of Mn18Cr18N and Mn18Cr18N+Ce high nitrogen austenitic stainless steels at 1173-1473 K and 0.01-1 s^(-1) were investigated by thermal compression tests.The influence mechanism of Ce on the hot deformation behavior was analyzed by Ce-containing inclusions and segregation of Ce.The results show that after the addition of Ce,large,angular,hard,and brittle inclusions(TiN-Al_(2)O_(3),TiN,and Al_(2)O_(3)) can be modified to fine and dispersed Ce-containing inclusions(Ce-Al-O-S and TiN-Ce-Al-O-S).During the solidification,Ce-containing inclusions can be used as heterogeneous nucleation particles to refine as-cast grains.During the hot deformation,Ce-containing inclusions can pin dislocation movement and grain boundary migration,induce dynamic recrystallization(DRX)nucleation,and avoid the formation and propagation of micro cracks and gaps.In addition,during the solidification,Ce atoms enrich at the front of solid-li-quid interface,resulting in composition supercooling and refining the secondary dendrites.Similarly,during the hot deformation,Ce atoms tend to segregate at the boundaries of DRX grains,inhibiting the growth of grains.Under the synergistic effect of Ce-containing inclusions and Ce segregation,although the hot deformation resistance and hot deformation activation energy are improved,DRX is more likely to occur and the size of DRX grains is significantly refined,and the problem of hot deformation cracking can be alleviated.Finally,the microhardness of the samples was measured.The results show that compared with as-cast samples,the microhardness of hot-deformed samples increases signific-antly,and with the increase of DRX degree,the microhardness decreases continuously.In addition,Ce can affect the microhardness of Mn18Cr18N steel by affecting as-cast and hot deformation microstructures.
基金This work is supported by Beijing Municipal Natural Science Foundation(2202004)National Natural Science Foundation of China(51801048)Basic Research Fund for Newly Enrolled Teachers.
文摘In this study,we successfully developed a low RE containing Mg-3Y-2Gd-1Nd-0.5Zr(wt%)alloy with high strength-ductility synergy by combined processes of hot extrusion,hot rolling and ageing.This alloy exhibits an excellent strength-ductility balance(UTS of 345±2.0 MPa,TYS of 301±5.0 MPa and EL of 9.2±1.9%),which is better than that of many Mg-RE wrought alloys with higher RE concentration and even comparable to that of 6061 Al wrought alloy.A long-range chain-like structure consisting ofβphase,βH phase,βM phase and zig-zag atomic columns is observed for the first time in the studied alloy.The combined process of hot extrusion and hot rolling boosts the formation of deformed grains and low angle grain boundaries,and makes the deformed grains dominate in the alloy strengthening.Under this circumstance,the following ageing generates a novel heterogeneous structure comprising the long-range chain-like structure with broad interparticle spacing and the spacious precipitate-free zones in the deformed grains,which plays a key role in the concurrent strengthening and toughening of the alloy.The present study demonstrates that the deformed grains with long-range chain-like structures and precipitate-free zones is desirable microstructure for the low RE containing Mg alloys to achieve high strength-ductility synergy.
基金supported by the Natural Science Foundation of Inner Mongolia Autonomous Region(Grant No.2021MS05049)the Youth Fund Project of State Key Laboratory of Baiyunobo Rare Earth Resource Researches and Comprehensive Utilization(Grant No.2021Z2348)the Project of China North Rare Earth(Group)High-tech Co.,Ltd.(Grant No.2020H2177).
文摘To investigate the effect of rare earth on size and distribution of TiB2 phase in aluminum alloy refiner,Al-5Ti-1B-RE master alloy was fabricated,and its microstructure and phase constitutions were investigated by the combination of first principles calculations and experimental investigation.The calculated results reveal that Ce has the most effective modification ability due to the most positive adsorption energy and the largest charge transfer value compared with other rare earth elements.Results of experimental investigation indicate that the addition of rare earth in the Al-5Ti-1B alloys can greatly refine the particle size of TiB2,improve the distribution of particles and lead to better refinement effect than that of the Al-5Ti-1B alloys without rare earth.Moreover,Ce has the best optimization effect,which agrees well with the calculated results.
基金financial support from the National Key R&D Program of China (2022YFB3506200)the National Nature Science Foundation of China (22122113)。
文摘With the rapid development of society and economy, the excessive consumption of fossil energy has led to the global energy and environment crisis. In order to explore the sustainable development of new energy, research based on electrocatalysis has attracted extensive attention in the academic circle. The main challenge in this field is to develop nano-catalysts with excellent electrocatalytic activity and selectivity for target products. The state of the active site in catalyst plays a decisive role in the activity and selectivity of the reaction. In order to design efficient and excellent catalysts, it is an effective means to adjust the electronic structure of catalysts. Electronic effects are also called ligand effects. By alloying with rare earth(RE) elements, electrons can be redistributed between RE elements and transition metal elements, achieving accurate design of the electronic structure of the active site in the alloy. Because of the unique electronic structure of RE, it has been paid attention in the field of catalysis. The outermost shell structure of RE elements is basically the same as that of the lower shell, except that the number of electrons in the 4f orbital is different, but the energy level is similar, so their properties are very similar. When RE elements form compounds, both the f electrons in the outermost shell and the d electrons in the lower outer shell can participate in bonding. In addition, part of the 4f electrons in the third outer shell can also participate in bonding.In order to improve the performance of metal catalysts, alloying provides an effective method to design advanced functional materials. RE alloys can integrate the unique electronic structure and catalytic behavior of RE elements into metal materials, which not only provides an opportunity to adjust the electronic structure and catalytic activity of the active component, but also enhances the structural stability of the alloy and is expected to significantly improve the catalytic performance of the catalyst. From the perspective of electronic and catalytic activity, RE elements have unique electronic configuration and lanthanide shrinkage effect. Alloying with RE elements will make the alloy have more abundant electronic structure, activity, and spatial arrangement, effectively adjusting the reaction kinetics of the electrochemical process of the catalyst. In this paper, the composition,structure, synthesis of RE alloys and their applications in the field of electrocatalysis are summarized, including the hydrogen evolution reaction, the oxygen evolution reaction, the oxygen reduction reaction, the methanol oxidation reaction, the ethanol oxidation reaction, and other catalytic reactions. At the same time, the present challenges of RE alloy electrocatalytic materials are summarized and their future development direction is pointed out. In the field of electrocatalysis, the cost of catalyst is too high and the stability is not strong. Therefore, the testing process should be related to the actual application, and the test method should be standardized, so as to carry forward the field of electrocatalysis.
基金supported by the China geological survey project"Qaidam Basin Oil and Gas Resources Evaluation"(Nr:([2013]4-(3),001-008)National Natural Science Foundation of China(No.41330317)
文摘Total of 23 bench samples were taken from the No. 7 Coal of Iqe Coalfield, Qinghai Province, China, following Chinese Standard Method GB/T 482-2008 (2008). These samples were analyzed by powder X-ray diffraction (XRD), inductively coupled plasma mass spectrometry (ICP- MS) and X-ray fluorescence (XRF). The results indicate that the No. 7 Coal belongs to a low rank (Ro.ran =0.659%) and high-ash coal (40.54%). Compared to common Chinese and world low-rank coals, the lqe coal contains anomalous concentrations of rare metal elements, rare-scattered (dispersed) elements and rare earth elements. The highest contents of Rb, Cs, Ga and REY reach to 180, 26, 37, and 397 ppm, respectively. Their average contents of these elements are 10.9, 15, 4.8 and 3.5 times higher than those of world coals, respectively. Minerals in the coal include kaolinite, quartz, muscovite, siderite, and traces of rutile, and brookite. Kaolinite could be main host minerals of Rb, Cs, Ga and REY. The anomalous rare element Rb and Cs accumulation in the Iqe coal is related to both organic and inorganic matter. The REY concentrations may be related to circulation of thermal solutions, contained or sorbed by clayey particles, and organic matter as well.
文摘The modifying effect of rare earth (RE) oxide on inclusions in hardfacing metals of medium-high carbon steel was investigated by means of thermodynamics. The thermodynamic analysis for inclusion formation shows that RE oxide can be reduced to RE element by carbon, then the RE element can react with oxygen and sulfur to form the RE oxide, RE sulfide and RE oxide-sulfide in hardfacing molten pool. The deoxidization and the desulphurization can be carried out and the liquid metal can be purified. In addition, RE oxide can also react with sulfur to form RE oxide-sulfide directly. Therefore, the harmful effect of sulfur can be decreased.
基金supported by CGS grants(Item Number: 121201053303, 1212010881305, 1212011120811 and 1212011402450)
文摘1 Introduction Massive tungsten-tin,rare and rare earth metals ore deposits were formed with the widespread granite magmatic activity in early Yanshanian period in the eastern Nanling region.Recent studies indicate that the Yanshanian highly differentiated-granite formation is closely related to the deposits of tungsten and tin,rare and rare earth metals mineralization in the region(Xiao
基金supported by the National High Technology Research and Development Program of China (No. 2006AA11A189)Science and Technology Commission of Shanghai Municipality (No. 06DZ12212)+1 种基金National Engineering Research Center of Advanced Steel Technology (NERCAST) (No. 050209)the Innovation Fund for Graduate Studentof Shanghai University (SHUCX0910003)
文摘The performance of LiNi/γ-Al2O3 catalysts modified by rare earth metal oxide (La2O3 or CeO2) packed on BCFNO membrane reactor was discussed for the partial oxidation of methane (POM) in coke oven gas (COG) at 875 ℃. The NiO/γ-Al2O3 catalysts with different amounts of La2O3 and CeO2 were prepared with the same preparation method and under the same condition in order to compare the reaction performance (oxygen permeation, CH4 conversion, H2 and CO selectivity) on the membrane reactor. The results show that the oxygen permeation flux increased significantly with LiNiREOx/γ-Al2O3 (RE = La or Ce) catalysts by adding the element of rare earth especially the Ce during the POM in COG. Such as, the Li15wt%CeO29wt%NiO/γ-Al2O3 catalyst with an oxygen permeation flux of 24.71 ml·cm^-2·min^-1 and a high CH4 conversion was obtained in 875 ℃. The resulted high oxygen permeation flux may be due to the added Ce that inhibited the strong interaction between Ni and Al2O3 to form the NiAl2O4 phase. In addition, the introduction of Ce leads up to an important property of storing and releasing oxygen.
基金Project supported by the National Science Foundation of China (50374015)
文摘In this paper, the recent advance of processes for treating Baotou mixed-type rare earths concentrate, bastnasite, and ionic adsorption deposit in China was reviewed. The R & D circumstance and new progresses in separation and purification of individual and high purity RE compounds in China were introduced. Moreover, the development of RE hydrometallurgy was also predicted. So we suggest to enhance the research and development of products applying RE, especially Ce, Y, Gd, Sm etc., for keeping RE consumption equilibrium and extending applications, to increase enterprise's automatic control level for improving the stability and the consistency of the products, and to pay more attention to protection of environment.
文摘Introduction It is well known that organometallic hydrides of rare earth metals are the catalysts and reducing reagents for the catalysis polymerization of alkenes and the catalysis hydrogenation of alkenoalkynes. There are four methods for the syntheses of organometallic hydrides of rare earth metals:(1) the thermal atomization of metals, i.e., the interaction of a rare earth metal with alkenes with a terminal alkyne;(2) the Ln—Cσ bond is broken with H;;(3) metal-
文摘The friction and wear properties of metal-plastic multilayer composites filled with glass fiber, which is treated with rare earth element surface modifier, under impact load and dry friction conditions were investigated. Experimental results show that the metal-plastic multilayer composite filled with glass fiber exhibits excellent friction and impact wear properties when using rare earth elements as surface modifier for the surface treatment of glass fiber.
文摘Al-Si metal matrix composites (MMCs) reinforced with 20 vol.% alumina-silicate shot fibers (Al2O3-SiO2(sf)) were fabricated by an infiltration squeeze method. Pure Pr metal was added into these composites. The effect of Pr addition on the microstructure evolution of Al-Si MMCs was investigated by SEM,TEM,and EDS. Pr addition is favorable to make uniform microstructures with the modified eutectic Si crystal. PrAlSi phase with high contents of Pr and Si is observed on the interface between the fiber and the matrix. The addition of Pr promotes interface SiO2 reduction,and SiO2 comes from the crystallization of Al2O3-SiO2 short fibers.
文摘The rare earth (RE) elements (Ce, La) were added to binary Ti 47% Al alloys (atomic fraction) by Induction Skull Melting. The element Ce of 1.0 atomic percent was added individually, and La of 0.2 atomic percent was added individually. This article studied the influences of rare earth metal (Ce, La) on microstructure of as cast TiAl based alloy by XRD, SEM, EMPA and TEM measurement methodology. The results show that most of rare earth rich phases (AlCe, AlLa) are uniformly distributed in grain boundary in the shape of discontinuous network, and some particles of rare earth rich phases within the grains are mainly ellipsoids. In addition, rare earth element can obviously refine the grain size and the lamellar thickness of as cast TiAl based alloy samples. The grain size of Ti 47Al 1.0Ce 0.2La alloy reaches about 30~80 μm, and the lamellar thickness of its γ phase and α 2 phase are less than 200 and 20 nm, respectively.