Optimal Light Intensity and Nitrogen-to-Phosphorus Ratio for Growth of Nitzschia capitellata Hust.

Objective] The aim was to explore the potential of Nitzschia capitel ata as excel ent baits and bioenergy, and the optimal light intensity and nitrogen-to-phos-phorus （N/P） ratio suitable for its growth were researched as wel . [Method] With light intensity gradient set, Nitzschia capitel ata was cultured with the same nutrients at （25 ±1） ℃ and light cycle at 12 h/d to select optimal light intensity. Then, Nitzschia capitel ata was cultured with the same condition, and nitrogen-to-phospho-rus ratios at 5∶1, 6∶1, 7∶1 and 8∶1. [Result] With light intensity at 3 000 lx, specific growth rate and standing stock achieved the highest at 0.51 d-1 and 7.97×104 cel s/ml. The growth condition with nitrogen-to-phosphorus ratio at 6∶1 was the most suitable for Nitzschia capitel ata growth. [Conclusion] The optimal light intensity and nitrogen-to-phosphorus ratio were 3 000 lx and 6∶1, respectively, for Nitzschia capitel ata.

Attenuation characteristics of a light attenuator combined by polarizers with different extinction ratios

This paper deals with a systematical analysis and an algorithm of attenuation characteristics of a light attenuator combined by n pieces of polarizers （n-LACP） whose extinction ratios are different from each other. The attenuation ratio expression of a two-LACP is deduced. We find that the monotonic attenuation interval depends on the first polarizer and that the attenuation range depends on the second one. For the three-LACP, a method for obtaining a monotonic attenuation interval is proposed. Moreover, the attenuation ratio expression is demonstrated. Analysis and experiment show that when the initial status of the three-LACP is at the maximum output, if the second or third polarizer rotates alone, the minimum attenuation ratios can reach K2^-1 and K3^-1, respectively, and if the first polarizer rotates, a minimum attenuation ratio of K2^-1K3^-1 can be obtained （K1, K2 and K3 represent the extinction ratios of the three polarizers in turn）. Furthermore, the attenuation ratio expression of n-LACP and the relevant attenuation characteristics are proposed. The minimum attenuation ratio of an n-LACP is （K2K3 ... Kn）-1.

Rapid determination of C1^- by light-absorption ratio variation approach using Cl^--eosin Y-Ag^+ adsorptive precipitation

The adsorptive precipitation between eosin Y （EY） and AgCl colloids at pH 3.73 caused the sensitive color change of the solution. The reaction mechanism between EY and AgCl was analyzed and this reaction was used for determination of Cl^- in trace level by the light-absorption radio variation approach.

Measurements of NO_2 mixing ratios with topographic target light scattering-differential optical absorption spectroscopy system and comparisons to point monitoring technique

A topographic target light scattering-differential optical absorption spectroscopy （＇IbTaL-DOA~） system is de- veloped for measuring average concentrations along a known optical path and studying surface-near distributions of atmospheric trace gases. The telescope of the ToTaL-DOAS system points to targets which are located at known dis- tances from the measurement device and illuminated by sunlight. Average concentrations with high spatial resolution can be retrieved by receiving sunlight reflected from the targets, A filed measurement of NO2 concentration is performed with the ToTaL-DOAS system in Shijiazhuang in the autumn of 2011. The measurement data are compared with con- centrations measured by the point monitoring technique at the same site. The results show that the ToTaL-DOAS system is sensitive to the variation of NO2 concentrations along the optical path.

Tuning the particle size,physical properties,and photocatalytic activity of Ag_(3)PO_(4)materials by changing the Ag^(+)/PO_(4)^(3-)ratio

This study demonstrates the influence of the Ag^(+)/PO_(4)^(3-)ratio in precursor solution on the crystal structural formation,morphology,physical properties,and photocatalytic performance of a Ag_(3)PO_(4)photocatalyst that is fabricated,using a facile precipitation method,from AgNO_(3)and Na2HPO_(4)·12H_(2)O.The material characterizations were carried out using x-ray diffraction(XRD),scanning electron microscopy(SEM),energy-dispersive x-ray spectroscopy(EDX),Brunauer–Emmett–Teller(BET)surface area,Fourier transform infrared(FTIR)absorption,Raman scattering,x-ray photoelectron spectroscopy(XPS),UV-vis absorption,and photoluminescence(PL).The results show that Ag_(3)PO_(4)crystallizes better when the excess PO_(4)^(3-)content increases,and the lattice parameters decrease slightly,while the crystal diameter and the particle size increase.This change is also observed in the Raman scattering and FTIR spectra with the increase in the vibration frequency of the[PO_(4)]group.The compression of the[PO_(4)]unit was also confirmed in the XPS spectra with the shift of P 2p peaks toward higher binding energy.The photocatalytic results showed that the samples synthesized from excess PO_(4)^(3-)solution exhibited higher photocatalytic performance compared to the sample with a Ag^(+)/PO_(4)^(3-)ratio of 3:1.A sample prepared from the precursor solution with a Ag^(+)/PO_(4)^(3-)ratio of 3:1.5 was optimal for RhB decomposition under both visible light and natural sunlight,completely decomposing 10 ppm RhB after 15 minutes of xenon lamp irradiation and after 60 minutes under solar light irradiation.This is attributed to the high crystallinity,small particle size and low electron–hole recombination rate of the sample.

Optimizing Optical Attocells Positioning of Indoor Visible Light Communication System

Visible light communication(VLC),which is a prominent emerging solution that complements the radio frequency(RF)technology,exhibits the potential to meet the demands of fifth-generation(5G)and beyond technologies.The random movement of mobile terminals in the indoor environment is a challenge in the VLC system.The model of optical attocells has a critical role in the uniform distribution and the quality of communication links in terms of received power and signal-to-noise ratio(SNR).As such,the optical attocells positions were optimized in this study with a developed try and error(TE)algorithm.The optimized optical attocells were examined and compared with previous models.This novel approach had successfully increased minimum received power from−1.29 to−0.225 dBm,along with enhanced SNR performance by 2.06 dB.The bit error rate(BER)was reduced to 4.42×10−8 and 6.63×10−14 by utilizing OOK-NRZ and BPSK modulation techniques,respectively.The optimized attocells positions displayed better uniform distribution,as both received power and SNR performances improved by 0.45 and 0.026,respectively.As the results of the proposed model are optimal,it is suitable for standard office and room model applications.

沿面放电光脉冲发展特征与临界击穿判据研究

绝缘沿面放电是引起高压开关柜中滑闪及电弧击穿的主要原因和前期阶段,准确有效地对绝缘异常爬电进行监测、跟踪和预警对保障设备安全运行非常关键。该文通过试验研究强垂直分量绝缘爬电的光脉冲阶段特征,并提出基于多波段光谱辐射强度信息的放电发展阶段划分方法和临界击穿判据,从而建立基于多波段光谱强度比值的放电跟踪预警方法。首先,搭建多波段单光子试验系统,采用自制多波段光学传感装置对沿面放电发展全过程跟踪测量,获得表征放电发展过程光谱比率的统计参量;其次,借助模糊聚类算法和支持向量机,构建放电发展临界特征空间边界,并对放电严重程度进行量化评估,结果表明该方法对放电阶段的正判率达到96.9%以上;最后,确立基于光谱比率的放电危险性主动预警逻辑,并开发了放电光脉冲跟踪预警系统,为开关柜放电和弧光监测的创新应用提供了参考。

基于水光电力系统时序生产模拟模型的水光优化配比研究

基于考虑系统负荷、新能源发电出力等时序变化特性的时序生产模拟法,建立了水光电力系统时序生产模拟模型;从系统结构性、经济性、灵活性与可靠性方面综合确定最佳水光容量配比,并通过金沙江上游川藏段水光系统验证了模型的合理性。金沙江上游川藏段光伏电站与水电站出力具有较好的年内、日内互补特性;对于2030年水平年,考虑枯期水电留存,913.6万kW水电配套400万kW光伏的方案综合性能更优,其新增非水可再生电量约60亿kW·h。

夜景照明亮度比例视觉适宜性评价仿真研究

夜景照明设备的整体亮度跨度较小,且存在很多限高区域,导致环境中整体亮度较差,为了提高夜景照明亮度与人眼视觉的适宜性,提出了夜景照明亮度比例视觉适宜性评价方法。通过夜景照明观测建模数据的标准化处理,采集夜景照明的亮度信息,利用二维数据矩阵分解所得信息,确定夜景照明的环境因素,利用亮度监测模型,计算亮度数据的统计量,完成夜景照明亮度的监测。根据视觉感知的亮度与照明设备亮度之间的关系,计算出光照强度对比度,将驱动电源安装到夜景照明设备中,调节夜景照明亮度比例。将人眼视觉范围划分成多个区域,计算出视觉适宜度判定准则,依据人眼视觉可以承受的亮度与照明亮度的映射关系,定义夜景照明亮度的空间函数,通过夜景照明亮度通道适宜度叠加,实现夜景照明亮度比例视觉适宜性评价。实验结果表明,上述方法适用于夜景照明亮度比例视觉适宜性评价,可以提高评价结果准确性。

无线紫外光MIMO通信系统信道容量估算方法

无线紫外光通信系统易受大气散射等因素的影响,导致通信信道容量估算准确率较低。为此,提出一种无线紫外光多入多出(Multiple-Input Multiple-Output, MIMO)通信系统信道容量估算方法。根据信道特征,构建无线紫外光MIMO通信系统的信道容量估计模型,获取无线紫外光的单次散射传输特性,利用符号补码式的方法改进空时编码,设定高级检测器中符号的接收能耗,使每个符号保持在标准功率数值范围内,完成通信系统信道检测式编码。根据不同发射角和接收角计算无线紫外光通信的路径损耗比,通过泊松随机分布获得最终通信系统信道容量的估算结果。实验结果表明,所提方法的传输速率可高达8 Mbps,误码率始终低于10-3bit/s,估算准确率在90%以上,估计时间低于4 ms,估算效果好,可为通信行业发展提供理论依据。

基于RSSR融合RNGO-Elman神经网络的室内可见光定位

针对动态环境下基于接收信号强度的传统可见光定位方法定位精度低、稳定性差等问题,提出一种基于接收信号强度比的改进北方苍鹰算法(NGO)优化Elman神经网络(RNGOElman)的室内可见光定位系统。提出选择一个辅助参考点,将待测参考点与辅助参考点的接收信号强度比值和接收机的真实位置作为训练集数据,建立不受动态环境影响的指纹数据库。针对NGO算法收敛速度慢、容易陷入局部最优等问题,利用折射反向学习策略初始化种群,增加种群多样性,引入非线性权重因子来加快收敛速度,避免陷入局部最优。使用优化后的NGO算法来优化Elman神经网络的初始权值和阈值,构建RNGO-Elman动态定位预测模型。仿真结果表明,在4m×4m×3m的实验空间下,优化后的RNGO-Elman定位模型平均定位误差为1.34cm,定位精度相较于Elman定位算法、NGO-Elman定位算法分别提高了82%,21%。在LED发射功率波动时,基于RSSR的RNGO-Elman定位误差为1.29cm,1.38cm。所提可见光定位方法具有定位精度高、定位性能稳定等优点。

基于Raptor编码的多输入多输出光通信系统设计

为了提高可见光通信(Visible Light Communication,VLC)系统的复用增益,本文提出一种基于多输入多输出(Multiple Input Multiple Output,MIMO)的固定比例像素化VLC系统。系统首先执行空间角度映射,使数据的传送可在角域中进行;同时利用Raptor编码方法来跟踪由于窗口截断而引起的数据信道特性变化;然后对于使用高速相机捕捉到的一系列时变图像,利用散景效应获得所有链路距离上的固定比例图像。实验利用液晶显示器和高速相机,对所提出的VLC系统进行了验证。与传统的像素化MIMO系统相比,本文所提出的系统在未对准朝向的情境下具有更高的鲁棒性,从而在多路复用场景有着广泛的应用前景。

脉搏血氧仪校准方法的研究

本方法适用于光电式的脉搏血氧仪(计)、脉搏血氧饱和度监护仪以及多参数监护仪中脉搏血氧监护部分的校准。在脉搏血氧仪质量控制方面,国家并没有专门的计量标准,各地依据当地的实际情况出台了地方标准,但是均没有关于光吸收比率拟合曲线误差的测量。本文主要介绍了脉搏血氧仪的组成和用途,针对目前临床在用设备,研究了脉搏血氧仪的校准方法,增加了光吸收比率拟合曲线示值误差项目,并对该校准方法进行了验证实验。此研究的目的是为开展相应的质量控制工作提供技术依据,希望通过质量控制确保脉搏血氧仪设备良好运行,有效保障医疗安全。

不同绿蓝光比例对罗勒生长及其能源利用效率的影响

【目的】在红光(R,660 nm)保持定量的条件下,探究不同绿蓝光比例(G/B)对罗勒(Ocimum basilicum Linn.)生长、气孔特征、光合能力以及能源利用效率的影响,为植物工厂罗勒高效节能生产提供技术支撑。【方法】在植物工厂环境下,以罗勒为试验材料,将生长19 d的罗勒幼苗分别置于RB(R﹕G﹕B=8﹕0﹕8,设为对照处理)、RG1B7(R﹕G﹕B=8﹕1﹕7)、RG1B3(R﹕G﹕B=8﹕2﹕6)、RG1B1(R﹕G﹕B=8﹕4﹕4)、RG3B1(R﹕G﹕B=8﹕6﹕2)、RG7B1(R﹕G﹕B=8﹕7﹕1)和RG(R﹕G﹕B=8﹕8﹕0)7种不同光质组合处理中,光照强度设置为160μmol·m^(-2)·s^(-1),其中红光占50%,光照时间为16 h/d,光/暗期温度为25℃/23℃,相对湿度设定为65%,光期CO_(2)浓度设定为1000μmol·mol^(-1)。试验处理13 d后测量罗勒的光合作用参数,处理19 d后测量其生长指标、气孔特征以及能源利用效率。【结果】除RG1B3处理外,添加绿光处理比对照显著提升了罗勒的株高、叶面积和干鲜重,不同绿蓝光比例(G/B)处理的地上部干、鲜重分别比对照提高了19%—51%和26%—64%;但除RG处理外,不同G/B处理间的叶面积和干、鲜重差异不显著。低G/B处理(RG1B7)仅降低罗勒下层叶片反面的气孔密度,随着G/B的增大,下层叶片正面及上层叶片的气孔密度均降低。总体上,叶片氮含量随着G/B的增加而降低,叶片氮含量和气孔密度的降低导致罗勒的CO_(2)同化能力、光利用能力下降,降低程度总体上随着G/B的增加而增大。由于绿光LED的发光效率比蓝光低,总耗电量随着G/B的增加而增加,本试验中仅RG1B7处理比对照显著提高了25%的电能利用效率;除RG1B3处理外,不同G/B处理比对照提升了30%—57%的光能利用效率,提升程度在除RG外的不同G/B处理间无显著差异;与对照相比,RG3B1和RG处理提高了罗勒上层和下层叶片水分利用效率,其中RG3B1分别提高了58%和74%,RG分别提高了67%和90%。【结论】结合罗勒生长和能量利用效率数据可知,RG1B7处理可被认为是植物工厂罗勒生产较为适宜的光质组合。研究结果可为明确不同绿蓝光比例对罗勒生长、光合特性及能源利用效率的影响规律提供参考,也为完善植物工厂环境下罗勒高效节能生产光配方提供技术支撑。

通过嵌合管来增强负Poisson比结构的耐撞性能

为了提高结构耐撞性,从而实现车辆轻量化,提出了一种嵌合管(由薄壁方形管嵌入双箭头格子而组成的)具有负Poisson比的增强型结构。通过负Poisson比的收缩效应,来增强负Poisson比结构和嵌合管的耦合作用。建立了增强型结构的有限元模型,并通过压缩试验,来验证其准确性;通过数值方法,在轴向载荷下,比较双箭头点阵结构、结构填充管和嵌合管负Poisson比增强型结构的耐撞性能,并进行了参数分析。结果表明:与双箭头点阵结构和填充管结构相比,增强型结构的总吸收能量为1.12 MJ,提升了约40%;比吸能13.2 kJ/kg,提升了约30%;短梁的夹角70°、长梁的夹角40°、长梁厚度1.4~1.6 mm、短梁厚度1.2 mm的结构填充管结构,具有较大的比吸能和较小的碰撞峰值力;增加嵌管厚度显著提升耐撞性能,但结构质量急剧增加,嵌管厚度达到1.2 mm左右时,兼顾耐撞性和轻量化的需求。

适用于扩展光源且具有阵列编辑性的透镜组设计

利用自由曲面设计并结合斯涅耳定律以及能量守恒定律,设计出一款能实现大面积均匀光斑的透镜组。该透镜组由一块次透镜和一块主透镜组成,其中次透镜对LED发光角进行收缩来减小透镜组结构,而主透镜对能量进行调控来实现均匀度调节。通过蒙特卡洛光线追迹模拟仿真,单个透镜组在接收面呈现方形均匀光斑,有效辐射通量比达到95.5%,均匀度达到95.7%,表明该透镜组具有良好的有效辐射通量比和均匀度;而透镜组阵列在接收面同样呈现方形均匀光斑,有效光通量比和均匀度均大于95%,表明透镜组阵列能够耦合多颗LED面阵列扩展光源,实现更高光功率的均匀光斑,可以用于基于荧光反向测量装置中大功率光源等应用场景。

考虑HPSA的IRS辅助室内VLC系统光源优化

针对可见光通信(VLC)系统中接收平面光功率分布不均匀的问题,提出了一种基于混合粒子群算法(HPSA)的智能反射面(IRS)辅助室内VLC系统光源优化设计方案。以16个发光二极管(LED)的矩形和混合型布局为例,设置接收光功率方差为适应度函数,将所提出的HPSA与IRS技术相结合,对LED的位置布局、半功率角以及IRS的偏航角与滚转角进行优化。仿真对比了初始的(未经优化)、基于HPSA优化的室内VLC系统,以及基于HPSA优化的IRS辅助VLC系统的性能。结果表明,在考虑一次反射链路的情况下,与初始的VLC系统相比,采用HPSA优化的系统在两种光源布局下的接收光功率以及信噪比波动都明显降低;基于HPSA优化的IRS辅助室内VLC系统在矩形布局下对接收光功率波动的改善与基于HPSA优化的VLC系统效果相当,其在混合型布局下明显低于仅采用HPSA优化的VLC系统的光功率波动。3种可见光通信系统中,基于HPSA优化的IRS辅助VLC系统的平均接收光功率最大。此外,上述3种VLC系统采用混合型布局的平均均方时延拓展性能均优于矩形布局。研究工作对室内可见光通信系统光源分布研究具有一定参考价值。

Methane concentration detection system based on differential infrared absorption

The infrared absorption method for methane concentration detection is an ideal way to detect methane at present. However, it is difficult to spread this method due to its high cost. In this paper, by using a wideband infrared light emitting di- ode （LED） accompanied with a PIN photo electric diode, a low-cost methane detection system was designed. To overcome the shortcomings caused by the wide working band, a differential light path was designed. By means of a differential ratio algo- rithm, the stability and the accuracy of the system were guaranteed. Finally, the validity of the system with the proposed algo- rithm was verified by the experiment results.

基于预编码与压扩技术VLC系统研究

针对非对称削波光正交频分复用系统应用在可见光通信中峰值平均功率比过高的问题,在研究编码技术和失真技术的基础上,提出了一种Hadamard编码与归一化μ律压扩联合方案来降低峰值平均功率比。联合方案仿真结果表明,与Hadamard编码技术相比,在峰值平均功率比抑制性能方面提升了5.8 dB;另一方面,与归一化μ律压扩技术相比,在误码率上仍然取得了更好的性能,优化了2 dB。

基于深度学习的室内可见光通信光源配置策略

为了在不同的室内环境下寻求最优的光源优化方案,提出了一种基于深度学习的室内可见光通信光源配置策略。分别引入室内障碍物、自然光和人员移动干扰,以室内信噪比均匀度为目标函数,使用花授粉算法(FPA)对不同的房间状态下的光源功率和半功率角进行优化;将得到的房间状态和光源配置作为训练集,使用卷积神经网络(CNN)进行训练,得到的计算模型可以在不同房间状态下对最优光源设置进行预测,实现光源配置的动态调整。仿真结果表明:该策略的光源参数合格率达88%,且预测结果在房间信号功率和光照强度上均满足要求。